Small Company looking for a LabVIEW consultant (remote consultant welcome)

Hello,
We are a small company looking for a LabVIEW consultant. This is about a 3-6 month project. The consultant must be familiar with NI hardware product as well. Please send me your resume/CV. In your email please state the following: years of experience, educational background, your hourly requirements, your location, and the amount of time you will be able to provide.
Please removes spaces on the email below.
int e g r at e d devi c e s @ yah oo. c o m

I'm not sure if this is frequent on the NI forums, since I believe NI validates user information prior to issuing an account that allows them to post to the forum. But usernames (like mine) don't provide immediate identifications; you have to ask for it.
Apparently Job Scams have become more frequent. See the list of tips on the following site, (I have no relationship with this site. It just came up in a google search).
http://www.identityhawk.com/IdentityProtectionTips-inHonorof-LaborDay
5 Steps to Take Before Applying for a Job
1. Email - the company to get information about the job. Do not provide any personal information to them upfront.
2. Phone - speak to an official at the company and ask about the job. Be assured that it is legitimate.
3. Meet - at the company site to assure it is a real company. If you cannot meet, and the company is in your town, drive by to see the facility, (possibly using google maps to view the site).
4. Verify - see if you can find a person who has worked at the company or call a Chamber of Commerce of Better Business Bureau to assure the legitimacy of the company. Search online for legitimate information about the company, search online for any complaints of non-legitimacy. State Entity sites typically have the name of the company and how long they have been in business.
5. Apply - once you are assured the company is legitimate, it is safe to apply; but you should still not supply highly personal information like bank accounts until you are officially hired.

Similar Messages

Solar Company looking for Labview Freelancer in Southern Germany

Hi!
For the Data Analysis and Modeling Team of Soitec Solar I am looking for a Labview Freelancer. Soitec Solar is located in Southern Germany in "Freiburg im Breisgau", close to Switzerland and France. Soitec Solar is a manufacturer of photovoltaic systems for industrial markets.
We offer some compact but interesting projects dealing with the acquisition of data generated by meteorological sensors and IV curve tracers for photovoltaic modules. The duration of these projects ranges from a few weeks to some months.
Telecommuting is generally possible, but applicants should be located within ~150km distance as at least two face-to-face meetings per project are required.
If you are interested, please contact me and attach a short description of Labview projects you have realized in the past:
Tobias Gerstmaier, e-mail: [email protected], office phone: +49 761 214 108 42
Best regards,
Tobias Gerstmaier

I'm located just on the swiss side of the swiss-german border (approx. 50km away).
I've done several freelance projects in the past on Spectrometer software and wafer-based quality control automation.
I'll send you an email shortly if you are still looking for someone.
Shane O'Neill
Say hello to my little friend.
RFC 2323 FHE-Compliant

Looking for a Labview job. Any offers or suggestions?

Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.

Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request.

I am looking for a real time CRM consultant who can teach me in Bangalore ?

I am looking for a real time CRM consultant who can teach me in Bangalore ?
Call me on 7204246238

If you are looking for a Creative player only The Zen V and Zen V plus are good options. I think they will satisfy most of your requirements.
Strike that, I don't think this will act as an "external hard dri've" as described in bMessage Edited by fdreinthea on 2-2-200605:37 AM

Looking for intern (Labview)

Hello!
I'm looking for a company somewhere in Europe that is offering an internship or a job. I have a Msc in Electrical Engineering (Automatics-Robotics), CLAD, and i'm looking for a work with Labview. I will be very thankful for any information...

Hi
Perhaps we can also help with your LabVIEW recruitment.
Austin Resources is a division of Austin Consultants who are one of the UK's premier NI LabVIEW consultancies, they are an NI silver alliance partner and employ amongst others three NI Certified LabVIEW architects.
Austin Resources has been set up to provide the Alliance network together with other companies and research organisations with qualified and well matched permanent and contract LabVIEW engineers. Austin Resources works closely with Austin Consultants to ensure all candidates and expertly screened and highly suitable for any proposed role. Our administration and candidate systems are tailored to match key National Instruments skills and qualifications as well as other key industry experience.
Austin Resources has been endorsed by NI's UK senior management team and we believe it is the UK's only dedicated specialist National Instruments LabVIEW recruitment agency manned by dedicated NI knowledgable staff.
Austin Resources has an extensive candidate base of experienced and qualified LabVIEW developers and Architects seeking immediate employment.
I am confident I have quality candidates waiting and thus await your approval to be able to submit details.
Provide me with the relevent contact information and I will call to discuss.
Regards
Ivor
Ivor

Houston based Oilfield company looking for part time help

i-Tec Well Solutions, a Houston Texas based company, is looking for someone to set up existing pressure transducers and load cells to work with existing Labview Signal Express software. This should be a short term contract job, which would include:
Wiring up all equipment for easy and frequent use.
Installing software on a dedicated shop computer.
Programing the software for collecting pressure data and force data.
Recommendations for purchasing additional equipment.
Recommendations for purchasing additional equipment to equip existing analog pressure pumps.
Design and build a stand-a-lone shop test cart for mounting/storing all essential equipment.
If interested, please contact Dennis @ [email protected]
i-TEC Well Solutions
5535 Brystone Drive
Houston, TX 77041
web: www.i-tec.no
email: [email protected]

Hello Joe:
Do you need someone on-site? I could offer you remote work with the best pool of designers and DPS experts? We have been using it since the initial publi release in 2011
Email me if you are interested => [email protected]

Looking for Chicago, IL area Xcelsius Consultant

Looking for Chicago-local Xcelsius consultant(s) that can assist in further developing our company's Xcelsius activity dashboards. Beacon Funding Corporation, Attn: Toby McDonough, 800 866 6396.
Thanks

Job Opportunities forum is here:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=38&catid=219&entercat= y
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"phenomblue" <[email protected]> wrote in
message
news:elbtdv$ah3$[email protected]..
> Hey everyone. My client has a need for a good UI
developer living and
> working
> in the Chicago area. They are a large, very successful,
creative company
> located downtown which is where the person they are
searching for would be
> working. This is not an offsite consulting opportunity
but could be on
> site
> contract to hire. They are lookign for someone
proficient in Flash and
> Actionscript. My company is the primary .NET integrator
providing all
> software
> development development and support so it would also be
nice if the person
> they
> are looking for was familiar and/or comfortable working
in asp.net as
> well.
>
> Lastly, they are also looking for someone with a similar
background
> interested
> in a managerial type role wrangling developers and
designers. This person
> I am
> assuming would work directly with us as on the larger
software projects as
> well. This candidate would have great project management
skills as well
> as a
> keen idea of the creative process and how to manage it.
This person will
> be
> the liason between the business and the in-house
development team.
>
> If anyone is interested in the positions described or
knows a good place
> to
> post this message to get targeted prospects, let me
know. I will take a
> look
> at resumes and pass them on to my client.
>

Looking for a Zen Touch Remote...with the following

So...first off...where in the world are all the accessories for the Zen Touches? Man..what a dissapointment...spent alot of money on this thing mainly becuase I use alot of creative products and did not want to give in to the IPod craze...not to mention I'm a service tech. at my work and we get like 0 ipods a day in for service...such garabage...anyways:
I'm looking for a wired remote for my 40 gig Zen Touch. I DO NOT NEED...FM Tune...a friggen MIC..i mean common people...a mic!!
!! I do not need the time...
all I require is a forward...backwards...fast forward..reverse...power on/off...backlight display with maybe the time duration on a track...and thats about it. is that so hard? does it exsist?...i'm leaning towards a probably not.
can't help but feel abandond on my unit given there is a lack on accessories for this unit...and it just seems like creative is pumping out those really small...no space mp3 players with a full heap of accessories to choose from.
well at least your Elite Pro is nice.

orangeblast wrote:So...first off...where in the world are all the accessories for the Zen Touches?
What accessories do you want? Most of the iPod accessories are junk, or just infinite versions of the same thing.
I'm looking for a wired remote for my 40 gig Zen Touch. I DO NOT NEED...FM Tune...a friggen MIC..i mean common people...a mic!!
!! I do not need the time...
There is only the one remote, so that's the only choice I'm afraid. But if you don't need the features, don't use them.

Electromechanical Engineer Looking for Interesting LabView telecomute work.

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

Looking for a labview virtual instrument program we can modify

Hi, I’m looking for a canned labview virtual instrument program we can modify for the OMB DAQ 55 from Omega to measure three temps and control three DO. I have the driver at:ftp://ftp.omega.com/public/DASGroup/products/OMB-DAQ5455&56/ The driver is labviewpdaq5xsetup.exe. I have the OMB DAQ 55 from http://www.omega.com/pptst/OMB-Daq55.html with a USB interface. I am trying to set it up to control a 24V electric valve. I’d like it to measure temperatures (5 separate temps), allow a set point to be programmed for three of them and turn on and off a DO based on the temperature. PID is not required yet. Maybe in the future… We have labview 7.1 and 8.0 but my colleague prefers 7.1 Do you have an labview VI programs that you can share that will do this with the DAQ 55? If you have something that will be close, we can modify it. But starting from scratch will likely mean we can not get this done in time for a project test. Simple set point and control is all I’m looking for… I’m new (my colleague knows it better than me, but has less time) to labview and do not have the resources to learn it from scratch to figure this out. Is there something you have I could modify? Can you help. Or are there canned programs you have that will do this? Labview is the preferred language. Thanks. Attached is what Omega shared with us, it might help…it’s a screen capture from a similar program, but far from the mark.

Hi vestel,
These discussion forums are more geared for questions - not necessarily having everyone else code for you.
You have a few options if you want code.
1) Look at the shipping examples that come with LabVIEW. This will give you a starting point from which to ask questions.
2) Look at the Instrument Driver Network that exits on National Instrument's Web site. Here are all the Omega instrument drivers listed.
3) Look at the list of Alliance members who you can pay to develop your code for you. Look here.
I hope this helps,
Kevin S.
Applications Engineer
National Instruments

French company looking for Flex developper

Hi everybody,
I'm an IT manager and working for a french company.
We're looking for a Flex developper to realize a proof of
concept.
Does anyone can help us ? Anyway, this developper can be
independant or from a software services company !
We ask him (or her) to speak french and to know Flex with
good and presentable experiences
Thank's for your help.

Hello VinooRaj,
I am experienced developer in Flex 4+.
You can Reach me @ [email protected]
Cheers.

Small runtime engine for newer labview versions?

A few times in the past I have created simple LabVIEW standalone executibles. I did this in 8.6 and used the runtime engine minimal installer instead of the full version. This resulted in an installation package size of 30-35 Meg.
I agin need to create a simple executible but have not seen a minimum runtime installer for any LabVIEW version since 8.6
Are there any minimal runtimes for other versions?
The default 2014 runtime is 264 Meg!!! It is hard to explain to a customer why a simple "Hello World" program requires a 200+ Meg download.
Solved!
Go to Solution.

Jack Dunaway has documented a way of segmenting the run time engine, basically only including the pieces of it you need.
https://connect.wirebirdlabs.com/knowledgebase/articles/172999-segmenting-the-run-time-engine
And here is an idea exchange item on it.
http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Segment-the-LabVIEW-Run-Time-Engine-RTE-to-ONLY-Necess...
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Looking for a LabVIEW Rest Engineer ofr an Aerospace company.

Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.

Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.

Houston based company looking for LabVIEW programmers

Infodat in Houston currently has 2 openings for immediate hiring for the following:
Engineers to develop software applications for integration with various hardware and control systems primarily using LabVIEW. The position involves integration of projects, proposal generation, and maintenance and upgrade of existing applications. Exposure to the Oil and Gas industry is a plus.
Infodat’s major areas of focus and delivery are in the Oil and Gas industry with focus on the following:
§               Tests & Measurement
§               Data Acquisition and Control
§               Process Automation
§               Mobile Technology
§               Web-based applications
Please email resumes to [email protected] and [email protected]
For more information, please contact: Andy Bhardwaj at 281-851-9062 or via email at [email protected]
All inquires will be held in strict confidence.

You should [post in the correct forum here:
http://forums.ni.com/ni/board?board.id=JobPost

Houston based company looking for LabVIEW Programmers

Infodat in Houston currently has 2 openings for immediate hiring for the following:
Engineers to develop software applications for integration with various hardware and control systems primarily using LabVIEW. The position involves integration of projects, proposal generation, and maintenance and upgrade of existing applications. Exposure to the Oil and Gas industry is a plus.
Infodat’s major areas of focus and delivery are in the Oil and Gas industry with focus on the following:
§               Tests & Measurement
§               Data Acquisition and Control
§               Process Automation
§               Mobile Technology
§               Web-based applications
Please email resumes to [email protected] and [email protected]
For more information, please contact: Andy Bhardwaj at 281-851-9062 or via email at [email protected]
All inquires will be held in strict confidence.

You should [post in the correct forum here:
http://forums.ni.com/ni/board?board.id=JobPost

Small Company looking for a LabVIEW consultant (remote consultant welcome)

Similar Messages

Maybe you are looking for