Small configure help please? I have 3 300-28 switches, I want to connect them and avoid stp (stp setup)
HI!
I have a small network. I have 3 300-28 cisco switches. I already connected my 3 servers and clients with the switch 1 and now I want to add more clients and I need to add my other two switches in the network. Please guide me with the simple configuration So I can connect them all and avoid loop (stp). Thanks
Hi Nagaraja Thanthry!
Thanks for your reply. I am implementing it tomorrow. By just conecting the switches together at trunk ports will there be no loop? I don't want my network chowk. I hope it will work well. I might need further help, please reply.
1. I will do setting on all switches. Assign IP addresses to switches (to Vlan 1 default).
2. Set one port (e.g 28) as trunk and all others as Access on all three switches.
3. Then I will connect the switches with each other at trunk ports. Hope there will be no loop in this setting.
4. Do I need to set any setting for stp in switches ?
Please reply one by one thanks.
I am using 192.168.0.1 255.255.255.0 IP range.
Best Regards,
Similar Messages
-
Please help! i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have. I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ???
Did you buy this iPhone new from an authorized seller?
-
I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it.
Is it not possible to create a text box, fill it with dynamic (data driven) text, but make the font size either scale up or down automatically, so that the entire text box is filled? This is a feature in PrintShop Mail Pro called COPY FIT. but no such feature in Indesign??
help help help please - I have latest version of indesign - thanks, DJlol... it seems to work, but I have another huge problem!
Apparently .CSV files cannot contain page breaks in the data! The data I am trying to merge is a 'letter', with paragraphs, line breaks, etc.,
But, after data merging, it ignores page breaks and only merges the first paragraph of each letter. (sigh)
Solution? Hopefully, an EASY solution. lol as we have thousands of records.
Is there a third party indesign plugin that will allow .xml, or .xls data merge import??
Thx,
DJ -
i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!
<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html> -
Please Help! I have been getting quick pop ups on my desktop screen and when I open Consol, here's what it says: 9/11/14 5:59:09.499 PM com.apple.launchd.peruser.501: (com.akamai.single-user-client[7490]) Bug: launchd_core_logic.c:4745 (26200):13
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
HELP PLEASE! I am working with GH4 4k footage in adobe preimere and the computer keeps freezing... any ideas?
Thanks for your response. I'm sorry for the lack of details, but posting a question on this forum is completly new to me, so I guess I am learning how it works.
I have to be honest, I am a novice to video editing, but I am here to learn so I will provide all the info I know and please let me know if it is enough...
I filmed my first feature film on a Panasonic GH4. We filmed in 4k (compressed files). I am about 900 GB of total files for all the footage. I am currently editing on a 17' Toshiba Satellite i7 with 750 GB of space and I believe 8 gb of ram. All of the footage for the film is not on the computer, but stored on a 1 TB external hardrive (Rugged Lacie is the name of the hard drive). I am using a usb 3.0 from the hard drive to the computer.
I actually was able to get through about 17 mins of edits for the film before I started to experiencing the computer completely freezing up on me. I tried using a different hard drive, and same issue. A friend mentioned it might just be the computer is not powerful enough to edit all the footage, but he wasn't for sure considering the computer is less than a year old and is on the higher end for a toshiba.
I am requesting advice on how to continue editing the film without the computer crashing if that is even possible with using the same computer. If not what would be my options?
Thank you! -
My mac can't connect to belkin router? My mac can connect but I still can't surf the net? Help Please... This is my first time to use mac and belkin.
Is it Wireless you're trying to connect with?
Which Mac?
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
Help! I have an iPhone 4s, I accidentally deleted a text message and my phone is not synced. How do I retrieve it?
You can not retrieve a deleted message that was not synced.
There are data recovery services that "may" be able to retrieve the message.
These recovery services can cost $1000 or more though. -
My Mpow Swift 4.0 Bluetooth Headphones can't connect to my Macbook Pro. I have Yosemite installed. At first I could connect them but now I can't. The MacbookPro says they are connected but they aren't. I need help
This doesn't work for Soen Transit speakers. My MacBook pro (mid2010) running Yosemite has never found the speakers. I'm considering returning them to Apple. Also chances of it discoing my new iPad Air is 50/50. Any ideas?
-
Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleting the empty recovered photo files but it just keeps asking me every time I go to open iPhoto! I'd love to just get rid of the "found" photos (I can't open them anyway!)
How do I get rid of them so that I can just open iPhoto straight up without this?
LindaOpen your iPhoto Library package with the Finder.
Click to view full size
look for a folder titled Import or Importing and move it to the Desktop. Launch iPhoto to see if the message goes away. If there is no message check the contents of the Import folder to see if you want to keep any of those image files (usually they have not been imported into iPhoto). If you want to keep them then drag the folder into the open iPhoto window to import.
OT -
I have two iTunes accounts, one for music and another for audiobooks. I want to merge them and maintain only one iTunes account. How do I do it?
You cannot.
-
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
ust installed update10.6.8 on my imac restarted and opened safari i have little snitch, it said xdefender wants to connect with apple, i let it. but after i thought has a malware been installed and os update rooted it out? kindly advise
i have this sorted, a misunderstanding it was not xdefender trying to connect with apple it was XProtect Updater from apple.
jcher -
When I imported my photos from iPhoto to Aperture, I appear to have lost all my keywords. Can I retrieve them and, if so, how?
How did you import them?
Keywords are preserved if you use either the Import iPhoto Library or Show iPhoto Browser methods.
Regards
TD -
I have a poor website. I want to change theme using adobe tools. AI, Photoshop. Which must i choose from this?
my website : http://white-vps.comor you could use any number of free hosting options like say Fileden (free up to 5GB usage per month, and that's per account), or upload to youtube & use their H264 (not Flash) option etc etc
No doubt MobileMe is splendid, but seems overkill to host a video file, possibly ?.
Maybe you are looking for
-
Retina Display MacBook Pro eye problem and strain
Hi, the name is Ben Recently, I boought a retina display and have since been having noticeable eye problem. (strain, fatigue, oversensativity to computer monitor/screen ligthing) My question was, has anyone been experiencing the same. I use my comput
-
Advantages of using SRM over R/3
Hi, What is the advantage of extending the contract management from R/3 to SRM do we gain any advantage in this? Can we have SUS implemented to Ver 4 classic scenario. Regards Sairam
-
Native library loading problem
Hi Folks, I currently downloaded, and compiled the bDB core using VS 2010 x64 (I run 64 bit win7, and JRE 64 bit). In Eclipse I'm trying to use the native library (setting up the path correctly), however the java is complaining that it cannot find de
-
I am trying to create a standard header for our company as we are trying increase the development of custom ALV reports. I have the header working, but I am wondering how to convert an internal table to html and display in the header. This is mostl
-
Why is 8gb only showing total memory of less than 6.5?
why is 8gb only showing total memory of less than 6.5?