Small correction in Document -Base IMG Configuration

Thank you, Michael Fan for a very helpful Document :
<b>Base IMG Configuration Settings for Pre-Configured SAP Student Lifecycle Management
(ERP 6 - EHP 3)
31 October 2007</b>
Could you pls. check, if it is an error or its my misunderstanding :
In step 3.10 --- On Page no.16, Pls. change the Number Range CM from Ext to internal (Remove X)
<i>As this document will be reffered by many others like me...</i>
Thanks and regards,
Devendra Sharda

Yes, I will correct that.  I actually just discovered that mistake myself yesterday! (newly added: the 'mistake' was in an older system!)
Michael
Added content:
Actually, upon re-test, this setting should correctly be an external (marked 'X') when you have activated the BAdi PSCM_PARTNER, which is described in section 3.16.  With older versions of the software, then indeed the number range for the BP should be 'internal'.  Your behavior will differ depending on your release level.
Message was edited by:
        Michael Fan

Similar Messages

  • What is base line configuration and final configuration

    Hi
    1. what is base line configuration and  what is final configuration?
    2.Can we calculate depreciation every day , if yes how plz explain?
    3. what is the Organizational structure in FI , CO , and over all FICO and in Asset Accounting?
    for 3rd one , in 1 interview for FI org structure i answered
    CLIENT-COMPANY-COMPANY CODE- BUSINESS AREA
    but the interviewer not satisfied, i checked in SAP LIBRARY there is also same,
    if  my ans is not correct plz  tell me the correct org. structure,
    and for  Asset a/c ing in sap library 2 possible org structures r there 1 is
    CLIENT-Chart of a/cs - Charf of Depre-Plant -B.area,
    is it correct ,
    plz can one answer for my doubts
    thanks
    thanks in advance

    for your action............don,t confuse the structure....
    1.FI Orgination Structure:
    Client>Controlling Area>Company code>Plant->Storage Location--->Finished goods or Raw material
    (ii)Co.code>Sales Org.>Distribution Channel-->Division
    (iii)Co.code>Purchase Org>Product group
    (iv)Co.code--> Business Area
    2.AA Orgination Structure: Client> Chart of Depreciation>Depreciation Areas>Asset Classes->Company Code->Main Asset> Sub-asset.
    3.CO Orgination Structure:Client>Controlling Area>Cost center or Internal Order or PCA or Produt Costing
    Client/Operating Concern --> Co-PA

  • Takes a long time to open small MS Word Documents on SSL VPN

    I have an issue that when users connect to my ASA 5520 via SSL VPN it takes from fifteen seconds to three minutes to open up small Microsoft Word documents, it also takes a long time to save changes. Users also reporting Word crashes when on the VPN, but not when they are on the LAN. I have checked the endpoint speed of my cable modem and all is well there. The DNS and WINS settings are correct on the ASA. I have turned off compression and enabled DTLS. Any suggestions? Thanks

    Reduce the mss to 1300. If that doesn't fix it, keep lowering it by 100 each time. If you get down to 1000 and it still doesn't work, then we need to look at something else.
    sysopt connection tcpmss 1300

  • Can't read airport express base station configuration wirelessly

    The setup:
    2TB time capsule that takes the ethernet feed from the cable modem for internet access.
    Airport express 802.11g plugged into speakers for Airtunes. No ethernet connection, just a wireless network.
    The problem:
    I can only read the airport express base station configuration when the mac is plugged into the time capsule by ethernet cable. This does not happen with the other mac I have on the network. It can connect to both the time capsule and the airport express without any problems. So unless I'm plugged in, iTunes and airtunes doesn't connect to the base station, and neither can Airfoil 3.5 or Airport Utility. Airport Utility does see the airport express. It just doesn't read the configuration wirelessly.
    I think this had something to do with elgato eyetv not liking airfoil, but I can't say for sure.
    Any thoughts?

    When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
    You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
    If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
    Modem/Router Power Recycling - Quick
    - Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
    - Power-on the BT Voyager modem; Wait at least 5 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    - Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the BT Voyager modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)

  • Configuration of Maintenance Optimizer and IMG-configuration

    Hi!
    I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
    Configuring Maintenance optimizer
    IMG-Configuration
    does exist?
    P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
    Thank  you very much indead!
    regards

    Dear Axel,
    Kindly review the URL :
    http://service.sap.com/solman-mopz
    On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
    Follow the steps and you are ready with the optimizer for downloading packages.
    Hope the above information helps.
    Regards
    Amit Devale

  • Loading local JRE classes tries first from document base (jaxp?)

    I am using JAXP in my applet with JRE 1.5. I have set the system property for JAXP to find the correct implementation. Both the implementation and the JAXP "interface" files are located in rt.jar in the local JRE installation.
    But everytime I call a JAXP class it first looks under my document base, in this case the jar file from server where the applet code is! Worse is, ity thinks that is a directory and checks "under" that directory.
    Finally, it does not find the JAXP classes in that jar (on the server), and it finds it locally. But this generates much network traffic.
    Is it possible to tell JVM how to find it's classes in rt.jar?
    This is the console debug logging:
    network: Connecting http://xx.xxx.xxx/xx/applet/egate.jar/META-INF/services/javax.xml.transform.TransformerFactory with proxy=DIRECT

    I have built a desktop application that can use these
    calls to check if the xml contained in the document
    called "file" is well formed.
    Ok. So, the application works fine then?
    DocumentBuilderFactory domFactory =
    DocumentBuilderFactory.newInstance();
    DocumentBuilder domBuilder =
    lder domBuilder = domFactory.newDocumentBuilder();
         domBuilder.parse(file);
    They are part of the javax.xml.parsers.*; package.
    Problem is that to serve this I need to put it in an
    applet but since I have to write the xml string to a
    file local to the server the applet is not working.
    Huh? You lost me there. Are you getting security exceptions from the applet? If yes, you need to sign the applet. Otherwise, what is not 'working' in the applet compared to the application? Also, why do you need to first write it to a file?
    My question is if anyone knows of some classes in the
    API that will allow me to check if a String of XML is
    well formed or not.
    If the document is not well-formed, the parse() call will throw an exception. Catch this and process as needed.
    I basically need to get a string from a field in a
    data base in XML format and be able to test it
    without first writing it to a document so I can get
    the applet to work.
    If you want to access an external database from an applet, you will need to sign the applet. You should not need to first write it to a file before parsing. Rather, simply use a stream (either InputStream or Reader) and wrap it in a StreamSource object.
    If anyone knows something on this or has an
    alternative suggestion please do tell.
    Thanks.- Saish

  • Not loading the Static content from the iPlanet document base

    Hi,
    I have configured I-planet and BEA 7.4 successfully. The document base for my
    iplanet has the pict directory.
    so when i try to access the pict directory from the browser say http://<>/pict/s.gif
    I get a Error 404--Not Found. I believe the web-server should serve my /pict directory
    by itself . Why is it that my requests are going to Web-logic..
    <Object name="hppreg" ppath="*/servlet/*">
    Service fn="wl_proxy" WebLogicHost="xxx.ffc.com" WebLogicPort="7001"
    </Object>
    I assume only the request with the /servlet should go to Web-logic.
    Any help is greatly appreciated
    Thanks,
    Nag

    The oracle driver library isn't on your classpath. It's normally called something like classes12.zip under the Oracle client installation directory.
    If you're working with Tomcat you need to copy the class library into common/lib and rename it to give it a .jar extension.

  • Can't read the base station configuration

    I just set up my AirPort Express using the Airport Utility, connected to Comcast high-speed Internet service. for some strange reason, the base station still has the "amber light blinking," while I seem to have no trouble with Internet connection (I'm on right now). but when I opened the utility again to set up Airtunes, I get the message, "reading base station configuration" then it fails. clearly, the base station is plugged in, connected to the Ethernet, and the signal's working... so what is going on? can somebody help?

    Perhaps you configured your Airport Express into "bridge mode" by disabling its ability to distribute IP addresses. That would explain most of the symptoms you describe.
    I suggest:
    1. do a hard reset of the Airport Express by following the instructions found at:
    http://docs.info.apple.com/article.html?artnum=108044
    2. with the Airport Express cabled to the cable modem, pull power to both devices. Wait at least five minutes - longer if you are patient. Then plug power into the modem and wait a minute. Then plug the Airport Express into power and wait for it to restart. Unless your Airport Express gets a solid green status light at this point, you really cannot proceed further - so try this step over again but waiting longer than you did previously before plugging the cable modem back into power.

  • Problems with Document base that does not exist

    I'm using Tomcat to run a Java servlet. Within my "Output - Apache Tomcat 6.0.14" window, I see the following.
    SEVERE: Error starting static Resources
    java.lang.IllegalArgumentException: Document base C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.14\bin\jupload.4.sourceforge.net\build\web does not exist or is not a readable directory
    This path no longer exists and it is not part of the project. How do you fix the problem? I did a search of "jupload.4"; nothing was found. I looked through some web.xml and context.xml file in the project. The path is not there.
    Here is the entire window content.
    Using CATALINA_BASE: C:\Documents and Settings\esharris\.netbeans\6.0\apache-tomcat-6.0.14_base
    Using CATALINA_HOME: C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.14
    Using CATALINA_TMPDIR: C:\Documents and Settings\esharris\.netbeans\6.0\apache-tomcat-6.0.14_base\temp
    Using JRE_HOME: C:\Program Files\Java\jdk1.6.0_04
    Feb 19, 2008 9:45:28 AM org.apache.catalina.core.AprLifecycleListener init
    INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.6.0_04\bin;.;C:\WINDOWS\Sun\Java\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\oracle\product\10.2.0\client_2\BIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Perl\bin;c:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Rational\common;C:\Program Files\QuickTime\QTSystem\
    Feb 19, 2008 9:45:29 AM org.apache.coyote.http11.Http11Protocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8084
    Feb 19, 2008 9:45:29 AM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 3208 ms
    Feb 19, 2008 9:45:29 AM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Feb 19, 2008 9:45:29 AM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
    Feb 19, 2008 9:45:32 AM org.apache.catalina.core.StandardContext resourcesStart
    SEVERE: Error starting static Resources
    java.lang.IllegalArgumentException: Document base C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.14\bin\jupload.4.sourceforge.net\build\web does not exist or is not a readable directory
    at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:141)
    at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3944)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4113)
    at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
    at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
    at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
    at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:626)
    at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:553)
    at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:488)
    at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
    at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
    at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
    at org.apache.catalina.core.StandardService.start(StandardService.java:516)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
    Feb 19, 2008 9:45:32 AM org.apache.catalina.core.StandardContext start
    SEVERE: Error in resourceStart()
    Feb 19, 2008 9:45:32 AM org.apache.catalina.core.StandardContext start
    SEVERE: Error getConfigured
    Feb 19, 2008 9:45:32 AM org.apache.catalina.core.StandardContext start
    SEVERE: Context [jupload.4.sourceforge.net] startup failed due to previous errors
    Feb 19, 2008 9:45:32 AM org.apache.catalina.core.StandardContext stop
    INFO: Container org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[jupload.4.sourceforge.net] has not been started
    Feb 19, 2008 9:45:37 AM org.apache.coyote.http11.Http11Protocol start
    INFO: Starting Coyote HTTP/1.1 on http-8084
    Feb 19, 2008 9:45:37 AM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    Feb 19, 2008 9:45:37 AM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/99 config=null
    Feb 19, 2008 9:45:37 AM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 8557 ms
    Feb 19, 2008 9:45:47 AM edu.stanford.smi.protege.plugin.PluginUtilities findPluginsDirectory
    WARNING: Plugins directory not found: C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.14\bin\plugins
    Feb 19, 2008 9:45:56 AM edu.stanford.smi.protegex.owl.repository.impl.LocalFolderRepository update
    WARNING: [Local Folder Repository] The specified file must be a directory. (C:\Program Files\Apache Software Foundation\Apache Tomcat 6.0.14\bin\plugins\edu.stanford.smi.protegex.owl)
    Feb 19, 2008 9:45:56 AM edu.stanford.smi.protegex.owl.repository.util.RepositoryFileManager loadRepositoriesFromURI
    WARNING: [Repository Manager] Could not find repository file: file:/C:/Program%20Files/Apache%20Software%20Foundation/Apache%20Tomcat%206.0.14/bin/RepositoryViewer/web/newspaperswc.repository
    Feb 19, 2008 9:45:56 AM edu.stanford.smi.protegex.owl.jena.parser.ProtegeOWLParser loadTriples
    INFO: Loading triples
    Feb 19, 2008 9:45:56 AM edu.stanford.smi.protegex.owl.jena.parser.ProtegeOWLParser loadTriples
    INFO: Start processing ontology: file:/C:/Program%20Files/Apache%20Software%20Foundation/Apache%20Tomcat%206.0.14/bin/RepositoryViewer/web/newspaperswc.owl Time: Tue Feb 19 09:45:56 EST 2008
    Feb 19, 2008 9:45:57 AM edu.stanford.smi.protegex.owl.jena.parser.ProtegeOWLParser loadTriples
    INFO: [ProtegeOWLParser] Completed triple loading after 1109 ms
    Feb 19, 2008 9:45:57 AM edu.stanford.smi.protegex.owl.model.triplestore.impl.TripleChangePostProcessor log
    INFO: [TripleChangePostProcessor] Completed lists after 0 ms
    Feb 19, 2008 9:45:57 AM edu.stanford.smi.protegex.owl.model.triplestore.impl.TripleChangePostProcessor log
    INFO: [TripleChangePostProcessor] Completed anonymous classes after 0 ms
    Feb 19, 2008 9:45:57 AM edu.stanford.smi.protegex.owl.model.triplestore.impl.TripleChangePostProcessor log
    INFO: [TripleChangePostProcessor] Completed deprecated classes after 0 ms
    Feb 19, 2008 9:45:57 AM edu.stanford.smi.protegex.owl.model.triplestore.impl.TripleChangePostProcessor log
    INFO: [TripleChangePostProcessor] Completed properties after 0 ms
    Feb 19, 2008 9:45:57 AM edu.stanford.smi.protegex.owl.model.triplestore.impl.TripleChangePostProcessor log
    INFO: [TripleChangePostProcessor] Completed named classes after 0 ms
    Feb 19, 2008 9:45:57 AM edu.stanford.smi.protegex.owl.jena.parser.ProtegeOWLParser loadTriples
    INFO: ... Loading completed after 1159 ms
    Edited by: esharris on Feb 19, 2008 7:18 AM

    Has the phone been set up with your Apple ID? To find out if the phone has been used with another Apple ID, check the current Activation Lock status of a device by visiting icloud.com/activationlock from any Mac or PC.

  • Recurring Documents run schdule configuration

    Dear all,
    I have a question regarding the recurring document run schdule configuration. my example is below
    I received an insurance policy,
    Period :23.02.2011 - 23.05.2011 (for 3 months)
    amount: 15.000 USD
    First I posted this policy to vendor account
    31 vendor ABC                   15.000 USD
    40 Prepaid Exp.acc.            15.000 USD
    secondly I create a recurring document with below specification.
    *Recuring entry run*
    company code:1000
    first run on :23.02.2011
    Last run on:23.05.2011
    interval months:1
    run date:23
    transfer amounts in local currency
    copy texts
    *Document header information*
    document type:AB
    currency/rate:USD
    translation date:23.02.2011
    Post. key:40 (insurance exp.account) enter amount (for monthly 5.000 USD)
    Post. key:50 (Prepaid exp. account) enter amount (for monthly 5.000 USD)
    and than ı execute document posting by F.14 and the document posted.
    but I want to create a recurring document and posted this document according to the below calculation,
    for february 2011= 1000,00 USD (15.000 USD / 90 days X 6 day)
    for march 2011   = 5.166,67 USD (31 day)
    for april 2011     = 5.000,00 USD (30 day)
    for may 2011    = 3.833,33 USD (23 day)
    how can I configure this recurring document.
    Thank you so much.......

    Hi,
    For this scenario standard is not possible, why because if the recurring documents are maintained only for which is the amounts and date is fixed for this scenario is possibe for recurring document, then discuss with the abaper try to maintain userexits for this.
    Regards,
    Kanike

  • IMG Configuration for Open Enrollment

    Hi ,
    I have a requirement wherein I have to do the IMG Configuration for Open Enrollment to bring a hyperlink for the same in SAP Enterprise Portal. As I am very new to ESS/MSS, I would require your help to achive the above functionality up and running in the portal and learn in the process.
    Thanks in advance!!
    Regards
    Smita

    General Link Views is configured using tcode 'HRBEN0041' (benefit URL). Those URL that have 'Internet Service is generally available' (double click on the entry to go to detail screen) will show up in 'General Link Views'.
    PlansOfTodayViews is not configured, but data is read from ee's master data using SAP function 'hr_ben_ess_rfc_plans_of_today'
    refer here
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4?quicklink=index&overridelayout=true
    EMPLOYEE_BENEFITPAY_OPEN_ENROLLMENT05
    read note 968360 and write a proxy class.,
    The links that you see in area/home page for benefits application is
    delivered using the proxy class CL_BENEFITS_AREAPAGE
    Open enrollment link in active in on SAP ESS home page

  • Please ensure that the applicationhost.config file is correct and recommit the last configuration changes made

    I am receiving event ID 5189 on Server 2008 R2, IIS 7.5.  I experience this error across a number of servers, each of which is running only the default web site, but have 600+ applications running on the default web site.  Each application
    has its own application pool.  My point is, the applicationhost.config is rather large.
    I have seen a number of posts on this error message, but my issue itself seems to differ somewhat.  I am aware of a similar post: http://social.technet.microsoft.com/Forums/en-US/3128ee93-1319-4cc2-9257-003512caf476/event-id-5189-microsoftwindowswas?forum=exchangesvrgeneral
    which points to KB http://technet.microsoft.com/en-us/library/cc734988%28v=ws.10%29.aspx
    However, in my case, it doesn't seem that the extreme measures for this resolution are required.  The error usually indicates a corrupted applicationhost.config that must be manually fixed, or otherwise the WAS service needs to be restarted, or the
    server itself, etc.
    In my case, the issue can usually be fixed by an application pool recycle, or at worst a stop/start.  I have an application which is sensitive to recycles, and so we do not have periodic recycle events configured for this application, which is the bulk
    of the applications on the servers.  It seems to me that this issue is usually caused by the application being in use when there is an applicationhost.config change.
    For instance, we have one application that we deploy using msdeploy.  We found that when we ran an installation for this application via msdeploy, we were receiving this event, and we would subsequently get 500 errors in the application (sometimes the
    application pool corresponds to that which is identified in the event log, sometimes it doesn't).    It seems like applications that were being hit at the time the applicationhost.config was modified by msdeploy were affected.  In an attempt
    to correct this, we moved from msdeploy to a batch file containing appcmd commands.  This also did not resolve the issue.
    I have another application which is installed using PowerShell commandlets.  We started to notice that this script also caused the issue to occur on occasion.  As I continued to identify different processes that resulted in the same issue, I came
    to the conclusion that this is likely due to any change in the applicationhost.config.  I assume the issue is that the applicationhost.config is modified during a read operation to the file by the application pool, or WAS service, and that the recycle
    event, which corrects the issue, forces a re-read of the applicationhost.config, resolving the bad-read issue.
    Has anyone else experienced this, or do you have any recommendations?  My current work-around is to not install any applications during peak hours, and performing an IISRESET after installs are completed, to ensure application stability.
    Message              : The Windows Process Activation Service failed to generate an application pool config file for application pool 'myAppPool'. The error type is '7'. To resolve this issue,
    please ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
    Id                   : 5189
    Version              : 0
    Qualifiers           : 49152
    Level                : 2
    Task                 : 0
    Opcode               : 0
    Keywords             : 36028797018963968
    RecordId             : 324108
    ProviderName         : Microsoft-Windows-WAS
    ProviderId           : 524b5d04-133c-4a62-8362-64e8edb9ce40
    LogName              : System
    ProcessId            : 0
    ThreadId             : 0
    MachineName          : MyComputer
    TimeCreated          : 3/3/2014 9:03:24 PM
    ContainerLog         : system
    MatchedQueryIds      : {}
    Bookmark             : System.Diagnostics.Eventing.Reader.EventBookmark
    LevelDisplayName     : Error
    KeywordsDisplayNames : {Classic}
    Properties           : {System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty}

    As an update to this issue, after doing some research, it appears the behavior is related to a new feature in IIS7 called Application Pool Isolation (http://technet.microsoft.com/en-us/library/dd163536.aspx).
    This new feature prevents cross-application spillage by isolating the configuration for each application pool in IIS.  So in reality, an application pool never actually reads the applicationhost.config - that is just a master file, and each time it
    is update, it triggers a change to the individual application pool configuration files, located in C:\inetpub\temp\apppools.
    We did try setting Advanced Settings > Disable Recycling for Configuration Change to true, but after an IIS reset we were still able to reproduce the issue - worse actually, because in our test program, which continually hits the web
    service, and also continually makes apphost.config changes, when the two events collide, the 500.19 issue precipitates; but after an additional change to the apphost.config, it seems that the additional changes will actually correct the issue (seemingly forcing
    another recycle, which is also how we resolve the issue manually); after making this setting adjustment, once the 500.19 issue precipitates, additional changes to the apphost.config does not correct the problem, only a manual recycle corrects it.  This
    is the recycling.disallowRotationOnConfigChange property of the app pool.  We also set the setting for recycling.disallowOverlappingRotation to True as well, with the same result.
    We ARE able to prevent this issue by setting the C:\inetpub\temp\apppools\myapppool\myapppool.config to read-only, but for obvious reasons, this is not a desired work-around.
    It seems like what is happening is that any change to the ApplicationHost.config is resulting in each of the C:\inetpub\temp\apppools temp application pool config files being updated as well, in addition to triggering an application pool recycle.  It
    seems to me the desired behavior would be that these files are only updated if the applicationhost.config changes are specific to that application pool - but that doesn't seem to be the behavior.
    After turning on failed request tracing, I was able to narrow the error down more:
    ModuleName
    AnonymousAuthenticationModule
    Notification
    2
    HttpStatus
    500
    HttpReason
    Internal Server Error
    HttpSubStatus
    19
    ErrorCode
    2147942413
    ConfigExceptionInfo
    \\?\C:\inetpub\application\application\web.config ( 9) :Failed to decrypt attribute 'password'
    Notification
    AUTHENTICATE_REQUEST
    ErrorCode
    The data is invalid. (0x8007000d)
    This seems to be pretty static.  Trying to look into possible causes of this issue.

  • TMS Provisioning Extension services: BASE GROUP Configuration Issue

    I was trying to configure the TMS Provisioning Extension services and i got stuck in Base Group Value?
    Error was getting something like the Base group value which i given was wrong. And it's asking me to check with TMS Administrator. Unfortunatly i am the one who configured the TMS also. but i didn't find something like Base Group value.
    In my scenario i have two VCS Control, two VCS Expressway, and a TMS. I have the clustering configured on both VCS Control and Expressway. and i need to use TMS Provisioning Extension Service for Cisco Movi.
    Where i can find the Base Group Configuration value?
    Regards,
    Nikhil Jayan

    Hi, i am not able to see the Provisioning Mode option in Administrative tools > Configuration > General Settings.
    Administrative tools > Configuration > Provisioning Extension Settings tab also is not coming. I am using TMS Version 13.2 and VCS x7.1.
    Do i need to configure something to get enable the TMS Provisioning Extension Service on TMS.
    Please help me.
    Regards,
    Nikhil Jayan

  • Airport Utility won't read base station configuration

    Hi
    This is very frustrating. I've just bought a new iMac and found out my previously working Airport Express that I use as an AirTunes hub can't be seen in iTunes.
    No problem, after trying everything I decided to reset it's factory defaults and then use Airport Utility 5.2.1 to set it up again from scratch. The utility sees my Airport Express hub and when I go to configure it it just stops on 'Reading base station configuration...' and doesn't move any further.
    Has anyone any idea why the utility is playing silly sods?
    Gaz

    I am having the same problem (sort of). I have two AX set up as WDS. I can see both units in Airport Admin Utility but cannot read configuration on either of them. It accepts their passwords but then returns the message "unknown error connecting to Airport Express" after a minute or so of the spinning rainbow.
    My main AX seems to be working fine. I can connect to the internet and my home network from either my iMac or MacBook Pro but my range is fairly limited which leads me to believe that there is a configuration issue with the 2nd AX as a WDS client but I can't check it. I have tried soft, hard and Factory reset all of which seemed to be successful but the problem still persists.

  • AEBS stopped working/ airport utility can't read base station configuration

    AEBS was working fine including the 7.1 update except printer wasn't working. As I attempted to trouble shoot network, AEBS stopped working. I tried accessing it through airport utility but it couldn't find the base station. I have now done a hard reset four times and though airport utility will recognize the base station it gets hung up trying to read the base station configuration. So I can't troubleshoot the AEBS from airport utiltity and the yellow light keeps flashing. What do I do now?

    AEBS was working fine including the 7.1 update except
    printer wasn't working. As I attempted to trouble
    shoot network, AEBS stopped working. I tried
    accessing it through airport utility but it couldn't
    find the base station. I have now done a hard reset
    four times and though airport utility will recognize
    the base station it gets hung up trying to read the
    base station configuration. So I can't troubleshoot
    the AEBS from airport utiltity and the yellow light
    keeps flashing. What do I do now?
    I had the same problem and a hard reset (6 seconds on the reset button) was recommended by Apple Tech support and that did it for me. The AE was back being seen and allowing me to reconfigure it from scratch.

Maybe you are looking for