Small display problem - what does it mean?
While I was using browser & viewer -- not adjusting, but switching into & out of full-screen mode -- one of my JPG images started to display with a couple of wide black bars extending halfway across the top. This was only in the viewer; the browser's thumbnail was fine. When I switched to full-frame the flaw was gone in the viewer, but it came back when I switched back. Finally I chose another image and went to full-screen and back and returned to the first image, and it was ok.
No harm done, but I'm curious about two things:
1. does this mean anything?
2. is there some way to refresh the viewer's image, in particular? I'm not clear about which this is, among the various renderings Aperture keeps.
I'm bumping this topic because now I'm seeing this phenomenon for the second time. The top right-hand quarter of the image is blacked out -- only in the viewer, not the thumbnail -- and not, at least this time, when I switch to Full Screen. So again, not a big deal, but a little annoying, and irregularities are always alarming.
Intel iMac, PowerBook G4 (new MBP on the way!) Mac OS X (10.4.8)
Similar Messages
-
[Opt 31-67] Problem: - what does this mean?
Hi All,
VIVADO 2015.2, Linux x64, Microblaze core is on the canvas (not generated stand-alone) with typical settings that were NEVER modified. This following error popped up in the very last synthesis I have made.
[Opt 31-67] Problem: A LUT3 cell in the design is missing a connection on input pin I2, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: system_i/mb_mba/U0/MicroBlaze_Core_I/Performance.Core/Data_Flow_I/Operand_Select_I/LOCKSTEP_Master_Out[0]_INST_0_i_3.
Thank you
VladHi Deepika,
I think I have found the cause of the issue. Sigh... It has to do with the other post I made earlier, a boolean IPI parameter for Verilog designs.
Because of that issue, I have hard-coded the parameter in the HDL instead of making it an IPI, and it caused a cloud of logic to be removed from the IP, leaving a dangling connection, which of course cause this issue.
Thanks for your response
Vlad -
Screen problem what does this mean ?
have to restart my iphone several times...once a day, or every two days...sometimes one a week,
how can i do to avert this ?Settings>General>Accessibility>Invert Colors>Off.
-
Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.
403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such? -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
What does this mean: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"? I tried reinstalling, but I get an error message saying something about permission to launch services.
Solving MSVCR80 issue and Windows iTunes install issues.
-
my iPad mini is displaying a padlock with a circled arrow around it. what does this mean?
The padlock with the circled arrow around it means the orientation lock is on & the screen will not change from portrait or landscape mode when you rotate your device.
-
IPad 2 running unauthorized modified version. What does it mean, and how can I solve this problem?
I get a message that my iPad is running an unauthorized modified version, even though I'm currently running 4.3.3. What does it mean, and how can I solve this problem? Please help, i ve tried everything. Thanks
I bought my iPad 2 three months ago from apple, and all my updates re from apple through iTunes. Version 4.3.3 is the latest version I updated, have been trying hard to update 4.35 but I get error messages all the time when the update is almost complete. Everything was working beautifully since I bought it, but this update problem just cropped up last week. I need a way out pls.
-
What does it mean when your ipod is in recovery mode and how do I solve this problem
What does it mean when your ipod is in recovery mode and how do I solve this problem?
Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
http://support.apple.com/kb/ht2519
Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now. -
My macbook pro displays a folder with a question mark and won't open. What does this mean and how can I fix it?
it means your HD and the software can't find each other, the following article tells how to troubleshoot this issue:
https://support.apple.com/kb/TS1440
hopefully you have backup of your data since sometimes this means the HD is crashing.
if the article doesn't resolve the issue i would take the mac to apple store or service provider and have it looked at, the following link tells how to find one close to you:
https://locate.apple.com
good luck!! -
In itunes with "Songs" selected there is a column labled with a header which is simply a check sign. If you select "View" a pulldown menu titled "View Options" appears and one has the option to either display (or not display) the "Checked" column. I get that. But what does it mean when a song is shown as "Checked" versus not being "Checked" That part I don't understand. Is it used in conjunction with another operator? I understand columns labled "Name", "Artist", "Alumn" but "Check Sign" is new to me. Please help.
Thanks.Diesel,
Thank you for your response. I never would have figured that out.
Russ -
I keep getting this error message that says "There is a problem with this windows intaller packaage.a program required for this install to complete could not be run.contact ur support personnel or package vendor" what does it mean? and how do i fix it?
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Latest IOS displays fault code 1671, what does this mean?
latest IOS displays fault code 1671, what does this mean?
If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
I have this new symbol that is displayed next to the battery sign, the symbol is of a pad lock with a circular arrow around the lock. what does this mean?
See p. 10-11 of the User Guide.
-
Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.
Error "Premiere Pro could not find any capable video play modules" | Startup
Maybe you are looking for
-
How to copy the confuguration files in admin to user in terminal.
Hi, i need to copy configuration files from Admin to user, I am not sure how to do. Please help me out on this. Thanks, Muniraju H
-
I donot find my contacts on i cloud?
i did back up but i cannot find my contacts on i cloud?
-
Interface to yokogawa centum 3000
I want to interface to yokogawa's centum 3000. I read centum 3000 support OPC server. Can i connect our device(labview operated)to centum 3000 directly or any other way to interface to it?.
-
Recently my airport express has started only playing through the right had speaker on my stereo, if i skip to another point in the song or change songs both speakers start to work again. Any ideas what this could be? Ive got the new firmware
-
Where can I download eLearning Suite 2.5?
I have license? I updated my laptop and now I must reinstall the software. There were files missing from the original software download that I received back in 2012. The trail version would be perfect. Can someone please help.