Small DVD-RW disks from Videocamera

I am planning to buy a imac in order to work on my films, which are on small DVD-RW disks from my Video Camera. Is there any way they fit into the iMac ? plastic tray ? any fitting help ? thanks.
iMac Mac OS X (10.4.3)

What Donald Morgan said! See:
http://docs.info.apple.com/article.html?artnum=58641
Trying to do this is just asking for trouble, unless you have a tray-loading drive, which the G5 imacs do not.

Similar Messages

How to erase DVD-Ram disk

I have a half dozen DVD-Ram disks (from my now-dead DVR). They mount on the Desktop and I can see the contents (VRO and associated files). I am exploring the various Toast, Streamclip (etc.) options to play/rescue the files. Once that is done, how can I erase (and rewrite/reuse) the disks? Neither Toast 8 nor Disk Utility seem happy with formatting/erasing this media. Any ideas?
~ Keri

Ah,... makes sense. Thanks! And here's what it says [below].
So, it seems to say I cannot "erase" ... but I can "overwrite" (??), which is splitting a hair finer would have occurred to me.
Okay. Then, how would I "overwrite" the files -- what application could I use to do this? Toast? Other??
~ Keri
MATSHITA DVD-R UJ-845E:
Firmware Revision: DMP2
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Media Type: DVD-RAM
Blank: Yes
Erasable: No
Overwritable: Yes
Appendable: Yes

DVD-Ram disks won't mount on Dual 450 - help!

I've got a particular and pressing problem. I'm an audio engineer among other things. I have a lot of files archived temporarily on DVD-Ram disks from my old Dual 450. I have to retrieve some files pronto but suddenly the DVD-Ram disk won't mount. The drive spits out the disk as soon as I insert it. It will mount CDs but not these DVD-Ram disks. Please help. I need to back these up off of thse old disks. But more urgently I have pending sessions that require I get some files from these disks. This happens both under OS 9.1 and 10.2.8 the last revisions of this computer I did. But it used to work until a year or so ago.
I have so far repaired permissions, used Disk Warrior and sprayed around the dusty drive with compressed air. It seems that perhapos a mechanism is loose springing the disk out when it's not immediately recognized as a CD or DVD-R.
Help!

Probably your best bet is to dismantle the drive and try manually cleaning the lenses, which has made a difference for some users.
Other option is to replace the drive with a new one capable of reading (but not necessarily writing) DVD-RAM media. LG-4163B is one such drive, Pioneer DVR-110 can also read DVD-RAM. These drives are under $40 online in the US.

Can not remove or delete a file from CD-RW or DVD-RW disk

I have P305D-S8900 notebook. I have a problem to remove or delete an old file from CD-RW or DVD-RW disk.
After I have selected the file and had try to trash the file a message showed up " disk is not writable."
Why is this happen?
Solved!
Go to Solution.

Will solve if you do the following step
http://support.microsoft.com/gp/cd_dvd_drive_problems
http://support.microsoft.com/fixit#tab0
select -->Your CD/DVD drive cannot read or write media in Windows.
and @click RUN NOW --> select@ Auto detect & repair
After repair is done, Right click- erace disk
after eraced the disk, select -Format

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

Is it possible to boot from a shared dvd or disk image remotely

Is it possible to boot from a shared dvd or disk image remotely without using netboot for install or utility?

All Apple Remote Desktop can do is point a system to a startup disk; it has no facility for providing a boot image. So you may want to ask this question in the Mac OS X or Mac OS X Server forums. You'll be more likely to get suggestions there, though other than NetBoot I know of no way to boot a group of computers from a single disk image or DVD.
Regards.

How do I get a small (Sony handycam) DVD out? from my iMac

In order to see if the iMac would import Sony Handycam DVD (small size) I put in such a small DVD... it's still there, it not recognized, and it will not come out. What can I do?
/Lars

This happened to a family members macbookpro. A mini-cd inserted, couldn't be mounted or ejected by the drive.
I cut a rectangle from a cereal box about two inches wide and 6 inches long. About an inch and half from one end in the middle I cut a notch and bent it down a little.
I................I
I................I
I.....I__I.....I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I_________I
I then inserted it slowly into the drive notch down and slowly pulled out. I did this few times and caught the mini-cd and removed it. The drive has worked flawlessly for several years
A few days after this happened I was in BestBuy and an Apple rep was there displaying new Apple products. I asked him about it and he said they have a tool that vacuums it out.

Can you put the small DVD discs from a camcorder in the DVD slot of the iMac?

Stupid question...can you put the small DVDs from a camcorder in the DVD slot of the iMac?

That could be a challenge. If I am not mistaken that camera strictly records to DVD - RW and has no digital output connectors, is that right?
My only experience with a camera like that was a bad one. I was able to get the video off the disc using a tray-loading iMac but it was painfully slow.
iMovie (for example) is designed to work with camcorders such as those specified in this reference:
http://help.apple.com/imovie/cameras/en/index.html
I cannot find the DCR-DVD92 in that database
You might consider finding an external USB slot-loading DVD drive, but as I say my experience was painfully slow, and you might run into file format compatibility challenges.
I am sure it's possible but it won't be as easy as importing video from something like an iPad or iPhone. I still use a camcorder on occasion but it has a FireWire port. That's easy.

HT3231 Transferring photos from PC to Mac Pro using a DVD-R Disk

I've downloaded some photos from my PC onto a DVD-R disk and my MacPro does not recognize that disk. What am I doing wrong?

Patricia 90 wrote:
I've downloaded some photos from my PC onto a DVD-R disk
You don't download files to an optical disc, you write them (or, informally, burn them) to the optical disc.
and my MacPro does not recognize that disk.
What exactly happens when you insert the disc? Is the DVD-R not mounted on the desktop, although Finder prefs are set to display such devices on the desktop?
What am I doing wrong?
Hard to say without more details. What application did you use on PC to write the DVD-R? What format did you use? By and large Mac OS X should be able to use the usual data formats (UDF, ISO9660). But you will have problems with packet-writing (InCD, DLA).

What do i do if something is blocking any disk from going in to my disk drive when i have no cd/dvd's in my macbook pro?

what do i do if something is blocking any disk from going in to my disk drive when i have no cd/dvd's in my macbook pro?

Bring it to an Apple store or AASP and have them check out the optical drive.

10.0.4 can't read 10.4 install disk from external Lacie DVD drive.

Quicksilver G4, 733.
Only has cd/r built in. Added Lacie d2 external DVD drive. Can read CD disks from this drive, but not the OS 10.4 Install drive. Downloaded drivers from Lacie, in case that would help, but can't open them because DMG images won't mount. (probably because 10.0.4 is too old, again)
Any help is appreciate, except for suggestions to send the DVD in for CDs, which seems very disappointing to me. We have the DVD drive, and it's working. There must be some way to install from this drive in OS 10.0.4, somehow.
Thanks.
G4 733 Quicksilver Mac OS X (10.0.x)
G4 733 Quicksilver Mac OS X (10.0.x)

Thanks very much for the replies. Unfortunately, the Mac in question is a friend's 2 hours away, and bringing another mac along isn't an option. But, the emac cd, as well as a 10.2 powermac cd, both ran the installer / began the installation process without issues while testing on a lower end G4 at work. I am assuming I can use those to install 10.2.
The real issue is the fact that the firewire drive won't boot with the OS 10.4 dvd. I do get a "firewire" symbol on the screen when forcing to boot from the firewire port, but dvd drive light just "flickers", and doesn't read the disk.
I'm not sure if upgrading to 10.2, getting the drive to work by installing drivers, etc, will solve the issue of booting with the 10.4 disk. Wouldn't the 10.4 disk boot even if the operating system currently on the mac is 10.0 (or 8.5..even..). Makes me wonder if this computer is capable of booting from a firewire port. Have found conflicting information on that soo far.
Another option would be to replace the internal with a dvd/combo. And that would be another set of questions (any recomendations of a dvd internal I can pop into this model?).
(733 Quicksilver model).
Thanks again.
G4 733 Quicksilver Mac OS X (10.0.x)
G4 733 Quicksilver Mac OS X (10.0.x)

How do I download a home DVD video disk (-R) to iMovie where I can then edit? I can download from a camera, but not from the disk.

How do I download a home DVD video disk (-R) to iMovie where I can then edit? I can download from a camera, but not from the disk.

iPhoto pulls off new videos from my iPhone 5 just fine. Does iPhoto automatically come up when you connect your iPhone? If it does, you should see your iPhone under "Devices" in iPhoto and then can select the videos to transfer (select, then Import Selected), though that should happen automatically.

How to transfer photos from portable hard drive to DVD-R disk

I have over 7000 photos on my Western Digital portable hard drive "My passport for Mac" and want to transfer them onto a Verbatim DVD-R disk. My reason being I want to reset the hard drive as I errored by partitioning it where as I shouldent have.

if these photos are stored on iPhoto, try to select all your photos > file menu > export > choose destination disk.
If they are already in a specific folder, just select it and choose burn to disk.

Created second partition in bootcamp Windows and converted whole disk from basic to dynamic

Hi everyone. I don't post here often however I hope the following helps someone else down the road.
I currently user ML and have bootcamp installed. I needed more space on my ML partition so decided to free up space from bootcamp. Going about this completely the wrong way I booted into my bootcamp partition, ran the computer management app and shrank my boot camp partition by 8 GB. This created free unused space which I decided to format over to NTFS with a view to booting back into ML, deleting and adding to my ML partition (how wrong was I).
Prior to completing the format of the newly created free space in bootcamp I was presented with the usual 'yes' / 'no' warning dialogue saying something along the lines of 'formatting this disk from basic to dynamic will prevent any installed operating systems from booting'. I made three monumental blunders at this stage: a) not reading the dialoge box b) completely disregarding the severity of the warning in the diaglogue box c) (you guessed it) pressing 'yes'.
The moment I pressed yes it was the start of a four hour feeling of grief as I thought of the last 6 years of my life wiped from below my nose with no time machine backup.
Upon rebooting bootcamp to get into ML the reality of the situation hit home as no OSX boot, no apple logo, no boot sound, my mac is trying to boot into windows without the option key being held in or warning to present me with a BSOD.
One thought in my mind: "oh Sh*t!!!"
3.5 hours passes and much reading online, learning of linux commands, downloading of linux distros, finding out how to install software and successfully setup a bootable linux usb and I'm typing this up on my mac while I time machine my data away to a freshly formatted external drive. Many lessons learned.
This is what I did amongst the vacating of my bowels and absorption of much nicotine.
There are two pointers to this guide. I was lucky enough to have another computer at hand to conduct the research and create a bootable usb. It a windows 7 toshiba z930. So you're going to need at a minimum: another computer (windows for the guide), a usb stick 2~4GB should be ok.
1) download a linux iso, I downloaded ubuntu, you can download what ever you like, but you're going to need linux (the rest of my mini guide will use ubuntu 13.10 during examples) http://www.ubuntu.com/start-download?distro=desktop&bits=64&release=latest
2) download Universal USB Stick Installer 1.9.5.1 (from now on as UUSI) http://www.pendrivelinux.com/downloads/Universal-USB-Installer/Universal-USB-Ins taller-1.9.5.1.exe
3) plug in your usb drive. make sure there is nothing on it that you need to keep as it will be formatted and lost. also plug your mac into a router connected to the internet. this will help prevent any issues with wireless drivers when booting into ubuntu later on.
4) once the downloads are complete, run UUSI, get past the prompts until you get to the 'setup your selections page'
5) (A) select 'ubuntu' from step 1. (B) browse to your freshly downloaded ubuntu iso in step 2. (C) tick show all drives. (D) select the drive letter of your usb in step 3. tick we will format *drive letter here*. (E) depending on the size of your usb set some persistent storage - I had an 8gb usb to hand so I set 1GB, less will probably do. (F) double check your settings and click create then let the program do it's thing, it can take some time depending on the speed of your usb drive, mine took 10 mins.
6) safely remove the usb and plug it into your mac, turn the mac on and hold the option key, once the usb drive is found hit enter and select ‘try ubuntu without installing’
7) wait for the ubuntu os to load and click the settings icon from the left tool bar
8) under settings click user accounts
9) click the + symbol in the bottom left hand corner
10) select administrator from the account type box and type a name for your account then click add
11) select the account and change the password, then confirm it and click change
12) go back to the desktop and select the power off symbol in the top right hand corner and select your name from the list, this will log you out of your current session and ask you to log in under your newly created login
13) once logged in click the settings icon again from the left hand menu and under settings go to software and updates
14) in software & updates under the ubuntu software tab tick ‘community maintained free and open source software (universe)’ and ‘software restricted by copyright or legal issues (maintained)’ then click close and close the settings window. Also check at the bottom of this window under ‘installable from cd-rom/dvd’ for two entries ‘cdrom with ubuntu 13.10 ‘saucy salamander’ - uncheck on of these entries if both are the same. Not sure if this was just me or a common problem. I found that trying to do the apt-get update would run into errors at the end if one of the entries wasn't deselected.
15) hold ctrl + alt + T to bring up the terminal
16) in the terminal window type sudo passwd root then enter a password for the account
17) in the same terminal window type sudo -i and enter the password given from step 16 if requested
18) in the same terminal window type apt-get update and wait for the update to finish without errors
19) in the same terminal windows type apt-get install testdisk and wait for the installation to finish without errors
20) in the same terminal window type testdisk
21) select create log and then the drive you want to work on e.g. your main apple OS hard disk then select proceed
22) select your file system type - for my ML installation I had to select ‘EFI GPT’ I don’t know if this will be the same throughout all macs / macbooks
23) select analyse, the step should take less than a few seconds and testdisk may report back errors with the partitions or it may proceed to the ‘current partition structure’ screen. If errors are displayed proceed past them until the next screen.
24) at the ‘current partition screen’ select quick search, you will have an opportunity to backup your drive here. I won’t go through this step (never learn) as I did not complete it myself
25) after the searching has completed all the partitions on the disk should be shown. Find your OSX partition using the size reference at the bottom by pressing the up and down keys. Once you have found the partition that relates to the OSX partition that is failing to start hit the right key to make it a primary partition a ‘P’ should show to the left of the partition data. I had to make sure my EFI System and Mac HFS (155GB) partitions were marked as primary.
26) hit the enter key to continue to the next screen and use the right arrow key to select ‘write’
27) the program will warn you it will write the partition table so hit ‘Y’ and a confirmation should be displayed that this has been successful.
28) reboot the computer and remove the USB stick (i removed it at the white loading screen after the reboot, not sure if it makes any difference)
29) allow the computer longer to boot, mine took about 35 seconds to show the apple symbol whereas it normally took between 3~7 seconds before I destroyed it.
30) get into OSX and backup everything to time machine or whatever you use then it probably a good idea to kill off your bootcamp install and refresh your mac from the fresh backup.
Hope this helps someone. I couldn’t find anything conclusive on the net when I ran into problems (all my own fault really for not reading the dialogues correctly) however I used bits from multiple forums and found out parts myself especially the linux parts as I don't know the os at all . Certainly won’t be making this mistake again anytime soon.
Well I’ve had an awful night and have work in two hours but at least the last 6 years of my (now backed up) life is intact and in my hands. I’d rather lose a night of sleep than lose all my data.
Sorry if some of the stuff above is wrong as I don't do this thing on osx / linux at all really. At least it might point you in the right direction.

Hi everyone. I don't post here often however I hope the following helps someone else down the road.
I currently user ML and have bootcamp installed. I needed more space on my ML partition so decided to free up space from bootcamp. Going about this completely the wrong way I booted into my bootcamp partition, ran the computer management app and shrank my boot camp partition by 8 GB. This created free unused space which I decided to format over to NTFS with a view to booting back into ML, deleting and adding to my ML partition (how wrong was I).
Prior to completing the format of the newly created free space in bootcamp I was presented with the usual 'yes' / 'no' warning dialogue saying something along the lines of 'formatting this disk from basic to dynamic will prevent any installed operating systems from booting'. I made three monumental blunders at this stage: a) not reading the dialoge box b) completely disregarding the severity of the warning in the diaglogue box c) (you guessed it) pressing 'yes'.
The moment I pressed yes it was the start of a four hour feeling of grief as I thought of the last 6 years of my life wiped from below my nose with no time machine backup.
Upon rebooting bootcamp to get into ML the reality of the situation hit home as no OSX boot, no apple logo, no boot sound, my mac is trying to boot into windows without the option key being held in or warning to present me with a BSOD.
One thought in my mind: "oh Sh*t!!!"
3.5 hours passes and much reading online, learning of linux commands, downloading of linux distros, finding out how to install software and successfully setup a bootable linux usb and I'm typing this up on my mac while I time machine my data away to a freshly formatted external drive. Many lessons learned.
This is what I did amongst the vacating of my bowels and absorption of much nicotine.
There are two pointers to this guide. I was lucky enough to have another computer at hand to conduct the research and create a bootable usb. It a windows 7 toshiba z930. So you're going to need at a minimum: another computer (windows for the guide), a usb stick 2~4GB should be ok.
1) download a linux iso, I downloaded ubuntu, you can download what ever you like, but you're going to need linux (the rest of my mini guide will use ubuntu 13.10 during examples) http://www.ubuntu.com/start-download?distro=desktop&bits=64&release=latest
2) download Universal USB Stick Installer 1.9.5.1 (from now on as UUSI) http://www.pendrivelinux.com/downloads/Universal-USB-Installer/Universal-USB-Ins taller-1.9.5.1.exe
3) plug in your usb drive. make sure there is nothing on it that you need to keep as it will be formatted and lost. also plug your mac into a router connected to the internet. this will help prevent any issues with wireless drivers when booting into ubuntu later on.
4) once the downloads are complete, run UUSI, get past the prompts until you get to the 'setup your selections page'
5) (A) select 'ubuntu' from step 1. (B) browse to your freshly downloaded ubuntu iso in step 2. (C) tick show all drives. (D) select the drive letter of your usb in step 3. tick we will format *drive letter here*. (E) depending on the size of your usb set some persistent storage - I had an 8gb usb to hand so I set 1GB, less will probably do. (F) double check your settings and click create then let the program do it's thing, it can take some time depending on the speed of your usb drive, mine took 10 mins.
6) safely remove the usb and plug it into your mac, turn the mac on and hold the option key, once the usb drive is found hit enter and select ‘try ubuntu without installing’
7) wait for the ubuntu os to load and click the settings icon from the left tool bar
8) under settings click user accounts
9) click the + symbol in the bottom left hand corner
10) select administrator from the account type box and type a name for your account then click add
11) select the account and change the password, then confirm it and click change
12) go back to the desktop and select the power off symbol in the top right hand corner and select your name from the list, this will log you out of your current session and ask you to log in under your newly created login
13) once logged in click the settings icon again from the left hand menu and under settings go to software and updates
14) in software & updates under the ubuntu software tab tick ‘community maintained free and open source software (universe)’ and ‘software restricted by copyright or legal issues (maintained)’ then click close and close the settings window. Also check at the bottom of this window under ‘installable from cd-rom/dvd’ for two entries ‘cdrom with ubuntu 13.10 ‘saucy salamander’ - uncheck on of these entries if both are the same. Not sure if this was just me or a common problem. I found that trying to do the apt-get update would run into errors at the end if one of the entries wasn't deselected.
15) hold ctrl + alt + T to bring up the terminal
16) in the terminal window type sudo passwd root then enter a password for the account
17) in the same terminal window type sudo -i and enter the password given from step 16 if requested
18) in the same terminal window type apt-get update and wait for the update to finish without errors
19) in the same terminal windows type apt-get install testdisk and wait for the installation to finish without errors
20) in the same terminal window type testdisk
21) select create log and then the drive you want to work on e.g. your main apple OS hard disk then select proceed
22) select your file system type - for my ML installation I had to select ‘EFI GPT’ I don’t know if this will be the same throughout all macs / macbooks
23) select analyse, the step should take less than a few seconds and testdisk may report back errors with the partitions or it may proceed to the ‘current partition structure’ screen. If errors are displayed proceed past them until the next screen.
24) at the ‘current partition screen’ select quick search, you will have an opportunity to backup your drive here. I won’t go through this step (never learn) as I did not complete it myself
25) after the searching has completed all the partitions on the disk should be shown. Find your OSX partition using the size reference at the bottom by pressing the up and down keys. Once you have found the partition that relates to the OSX partition that is failing to start hit the right key to make it a primary partition a ‘P’ should show to the left of the partition data. I had to make sure my EFI System and Mac HFS (155GB) partitions were marked as primary.
26) hit the enter key to continue to the next screen and use the right arrow key to select ‘write’
27) the program will warn you it will write the partition table so hit ‘Y’ and a confirmation should be displayed that this has been successful.
28) reboot the computer and remove the USB stick (i removed it at the white loading screen after the reboot, not sure if it makes any difference)
29) allow the computer longer to boot, mine took about 35 seconds to show the apple symbol whereas it normally took between 3~7 seconds before I destroyed it.
30) get into OSX and backup everything to time machine or whatever you use then it probably a good idea to kill off your bootcamp install and refresh your mac from the fresh backup.
Hope this helps someone. I couldn’t find anything conclusive on the net when I ran into problems (all my own fault really for not reading the dialogues correctly) however I used bits from multiple forums and found out parts myself especially the linux parts as I don't know the os at all . Certainly won’t be making this mistake again anytime soon.
Well I’ve had an awful night and have work in two hours but at least the last 6 years of my (now backed up) life is intact and in my hands. I’d rather lose a night of sleep than lose all my data.
Sorry if some of the stuff above is wrong as I don't do this thing on osx / linux at all really. At least it might point you in the right direction.

I had a mac mini on snow leopard but it broke.I now have a macbook pro on leopard how do I upgrade using the disks from my old mac mini

can I use the osx disks from my old mac mini to upgrade my macbook pro so i can then get a further free upgrade

You can not use a DVD that shipped with one Mac to load on to another. To upgrade to Snow Leopard you will need to purchase the Snow Leopard DVD.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Small DVD-RW disks from Videocamera

Similar Messages

Maybe you are looking for