Small Font for Date in Project Planning Board

Hello Friends?
Iam Using ECC 6.0 C Version in our Company. iam facing a problem in CJ2B that Date is displaying in very small font. i could n't solve that problem till date. Can any body help me where can we make settings for making fonts size bigger for dates other than zooming in Planning Board.
Appreciable for ur kind information.
Thanks.

Hi Hari,
Once you are into CJ2B, Please follow the following steps:
1. Click on the icon " Planning board Assistant"
2. Select the gantt Chart----Misc. in diagram Area
3. In the Selection of the "Text" of "Date Descript."--- Select "Dates one-line " ( This is applicable if your date is on the left or right side of the date bar)
4. Now you can change the Font colour, Font and Font Size, Bold or Italic.....
5. To Confirm the setting Click on "Update graphics" button on the screen.
6. Now, If you notice, the dates fonts will be as per your requirement.
If this does'nt work.. Try to explore in this area only..Probably try selecting other "Text" in the "date Descript."
Hope this helps.
Warm regards,
Srinivas Potluri

Similar Messages

Project planning board report to microsoft project report

hi all
good morning
i want to convert the project planning board report to Microsoft project and primavera report ...
please guide me through the steps......
Thanks in advance
Surya

Hi,
OpenPS for Microsoft project (OpenPS4MSP) is an Add-on to SAP R/3 Project System which enables users to transfer project related data between Microsoft Project and R/3 Project System.
Refer SAP Note: 579761 for OpenPS.
Then to integrate SAP and Primavera , you can use various integration tools available. One of them is Primavera Inspire.
Refer :
http://www.oracle.com/applications/primavera/primavera-inspire-for-sap.html
Regards,
Amit

Viewing CO versions in project planning board

Hello,
I have saved two CO versions of my project. When i go to the project planning board the approved plan column is full of data and looks great but the other version as no information. I have SAPALL so this isn't an authorization issue. Can someone please help me work out was is wrong?
Thanks a lot
Jason

Hi,
Basically there are possibilities of creating Plan version.
1) one you can create in CJ40 by manually feeding the Version ex:0,1,2 etc....
2) create one version in CJ40 and copy the same to another version in CJ9BS.
once the versions are created make the changes of values in the respective versionand save the changes.
Please check the version comparission in S_ALR_87013539 - Project Version Comparison: Plan.
Comming to plan board which fields did you picked up for comparission?
Rgds
Sudhir Reddy

Default print settings in the Project Planning Board CJ02N CJ2C

Hello
When you print the Project Planning Board CJ02N/CJ2C - there is an option to change the page setup.
I would like to change the default settings for left,right, top and bottom margins for all users.
Can anyone suggest where this would be done ?
Thankyou
Ros

Hi Varun,
Thanks for the fast repply!
Please see below the CJ2C and CNE5 screen shots:
Thanks and Regards
James

Scheduling comparision in Gantt Chart- Project planning board

Hi All,
I Need to use the "Scheduling comparision" in Project planning board gantt chart. This is to compare the original status of activities before and after scheduling.
But the "Scheduling comparision" button in the PPB does'nt seem to work.
( I am selecting the activity and then pressing the button for"display original status" )
How do I use this functionality?
Thanks in advance.

Hi Potluri Srinivas ,
After some tests, I still donot get, how does this functionalties work either.
I assume, it is linked with the setting in 'option' -> 'planning board' -> 'diagramm area' -> 'orginal schedule'. But I donot know, how the two things linked directly.
If you find it out, please post it.
Thanks and regards,
Zhenbo

Activity bar not displaying on Project planning board

Dear All,
I am getting one problem related to project planning board. I am working on a system in which when i am trying to run project planning board, its coming but in that gant chart i am not able to see bar for activity. Bar for project definition and wbs coming properly. In tabular form also i can see the activities. But the only problem i am not able to see bar for activity with relationships. I have check almost all configuration related to project planning board profile and also scheduling proflies.
Kindly suggest what can be the reason for the same.
Regards
Abhishek Sinha

Hi Abdul,
Thanks for reply. I have check all these options but all things are in place. OPT7 setting also right there. Kindly suggest what other setting can affect. In the planning board i can see the activity at left hand side corner with details but in gantt chart where we see bar chart for schdulines there activties are not coming.
Kindly suggest.
Regards
Abhishek Sinha

Unicode in Project Planning Board Screen (CJ20N)

Hi,
I'm facing a problem of unicode as follows:
I inputed some unicode (Vietnamese) at Project Structure screen, It is ok. but when I switch to Project Planning Board screen, It don't work. I also cannot input Vietnamese with unicode at this view.
Text example: "Các công tác chuẫn bị"
Please help!
Thanks
Long

Hi,
Found something on Service.sap.com
Thought would be useful..
To access this page you need a login id for service.sap.com
https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000557148&
thanks..

Network Header at the Project Planning Board gantt chart

Hi again,
Does anyone knows a configuration to allow the network header to appear in the project planning board gantt chart?
Tks
James

Try transaction OPT7
Double click on the appropriate Profile
On the Table Area Tab, select the flag for the field "Display Network"
Hope this helps
Regards
Steve

Project Planning Board - Customising

Hello All,
Do we have an option to customize project planning board.
If yes where exactly in SPRO can we do this, and does anyone have any documentation on what all can be configured in project planning board.
Points assured.
Thanks in advance.
Warm Regards,
Jatinder Bansal

Project planning board customization is available at IMG. path IMG>PS>Structures>Project Planning Board.
Planning Board is based on Gannt chart. the customization includes, Define Time Profiles, Define profiles for time scales , Define scale for the time axis, Define Profiles for the Project Planning Board, Maintain Report Assignment from the Planning Board & Capacity Leveling/Capacity Evaluations.
Regards
Murali

Simplest approach for creating database for small collection of data - new project design phase

Hello. I am at the design stage of a VB.NET project, which I hope will help me strengthen some skills I have learnt so far, and learn new ones. I have a couple of questions. Firstly regarding data types, is there a unified, standardised, all-convergent
data type available I can use? Secondly I've read about numerous avenues to create a database, namely binary serialisation, access-based, excel-based, notepad-based - The project I intend to create, will only require storage of a "relatively" small
collection of data, which may grow over time, but not significantly - so, taking this into account, which method is advisable for creating my database? (a beginner-friendly option is preferred). I have included a couple of images, with my questions, to give
a rough idea of what I'm planning to do. Thanks for your advice and suggestions.

Type would be the type of recording, as in LP (Long Play - standard album), EP (Extended Play) or Compilation. Most would be LP.
Chris,
I have a start on this and I want to pause here to post what I have and to discuss it.
There’s a lot to talk about because you’re going from little knowledge of a class to a lot in a hurry. There is no real hurry
in any of this; if you don’t understand then let’s stop and talk about it – until you fully have a handle on it, adding more would only fuel the confusion.
I’ll add this at this juncture: There is no one single right way to do this. There are definitely some
wrong
(or maybe just simply ineffectual) ways, but certainly no single right way. A lot of what you’ll see in the following will reflect my preference; nothing more than that.
Also though, I’m doing some of this to expose you to it. By that I mean that I may or may not have done it this way all along,
but I decided that I want to open the doors, even though at first it’ll seem like you’re trying to get a drink of water from a fire hydrant. ;-)
I have it set up with two namespaces: CMJR and Common. The latter one is for use for what I’m considering to be a ‘common’ need
– things that you may use in several classes. In time, the routines for serialization will be there but no need to even talk about that now so it’s not there.
The code so far (which I’ll show by the end of this discourse) is about 500 lines. For a class library, that’s puny! Most of
what I have thus far is just a shell of what will be filled in later. I won’t at all be surprised that by time this is completed, that 500 lines can easily grow to 5000 lines or more.
Like I said yesterday, the great thing about doing it this way is that it’s done
your
way; the drawback is just how much there is to do though, so if nothing else, this will perhaps influence your decision on how you want to handle things like this in the future.
The namespaces/classes are laid out as:
CMJR
Music (a class)
Film (a class)
Games (a class)
Common
IDataSource (an interface)
IGenre (an interface)
Utilities (a class)
This
image shows the structure of things thus far. The reason why the enum “GenreType” isn’t expanded in that
image is because it’s hugely long! In fact I fully expect that you’ll likely delete most of those. I got them from someone else’s class library (about a decade ago) so it was convenient to use.
Let’s start from the inside and work toward the outside here:
What is an
enum?
An enum (enumeration) is a type all its own. It’s a constant (of integral type) that you define. You can think of it as “an
integer with a name associated with it” because in code, you’ll use it like a multiple-choice selection and [typically] you’ll use its name.
Any time there’s a need for some something to be “this or that”, an enum very often is a useful type to use. In what we talked
about yesterday regarding what the source of the data is (CD or PC), that’s what came to mind; select which of the two from an enum. I always include a “_String” property with these so that it can later be used in whatever will consume the class. Often it’s
nothing more than use the .ToString method of the enum itself, but remember that then enum is actually an integer, not a string.
In this library so far, I have three enums defined. Two of those are in each of two interfaces (discussed in a bit) and one
is specifically related to only the music, so it’s in the class “Music”:
       Public Enum MusicFrom
           LP
           EP
           Compilation
       End Enum
The “type” that I asked about earlier is encompassed in that enum and you can more or less see how it works without any further
explanation.
Do understand that enum is only ‘useful’ for programming. We could use strings for all that it matters, but the problem with
doing that are many, including things like typos and capitalization. That’s not the case with an enum because you select one of the choices offered. In the one above, that would be either LP, EP, or Compilation. It can’t be anything else.
So if strings have this issue with typo’s and the like, what about if we just assigned it a number (an integer). Sure that’s
a better idea but are you really going to remember what 23 means? I doubt it, or not for long.
BUT – if we had a number that has a string associated with it, yea that’s a good idea!
Right! Now you know what an enum is. ;-)
Notice from the
class
diagram though – it’s not shown; I’m not using it all and that’s because I question its worth here, at least
for the current setup. I’ll explain what I mean:
As it’s currently set up, the basic unit of the class “Music” is a song. Even though there’s a title for the album, the album
– as a type – doesn’t exist. LP, EP, and Compilation refer to the album, not the song (in my opinion here) so I don’t see how it can be used.
If, however, we create a new type called “Album”, then I can see how it could be used. In something I worked on a while back
that’s exactly how I have it set up: An album is a “container for songs” and the album (a class in what I’m referring to from a few months back) has certain properties like a name and cover art, etc..
I don’t have this set up that way, but give that some thought.
What is an
interface?
Until quite recently I ‘knew of them’ but I never used them. There may or may not be merit in it here either but I wanted to
expose you to them.
From that link above:
“An
interface defines a set of members, such as properties and procedures, that classes and structures can implement. The interface defines only the signatures of the members and not their internal workings.”
The interface is a way in which you create a ‘code contract’. You don’t define what the methods, properties and events do in
the interface – you define that they have to be implemented if a class uses it.
It’s up to the class to actually put it to use (i.e., the code that’s executed in the member of the interface).
It’s a lot deeper than I’m discussing here – including a fair amount of ambiguity – so I won’t go any further than that for
now.
I have two interfaces set up and I have them in the “Common” namespace. They are “IDataSource” and “IGenre”.
IDataSource has an enum named “SourceType” and two read-only properties (see it later in the code).
The interface IGenre is likewise set up the same way and that’s where the long list of elements are in the enum named “GenreType”
that I talked about earlier.
I think it’s a good idea with Genre that it’s a “pick one of these” rather than simply a string and here’s why: If we later
add in a method to choose songs from a collection of them, one of the options might be of a particular genre. That’s not an uncommon request I would think. By using an enum, we don’t have to worry about your users mistyping when they add the data:
RockAndRoll
Rock and Roll
Rock
…etc., and imagine some of the typos your users might come up with, so by using an enum it’s definitive rather than guessing.
I said that an enum is ‘only for programming though’ so we’ll need to make it more usable later on. For example, I can also
build in methods to hand you back a string array of the string equivalent of those enums and then later a method to turn that string back into the actual enum member. By doing this then the method(s) which will use this will filter the data from the collection
to only include those with that particular genre.
Other than something simple, I’ve learned that once you get involved in a really long enum – like the genre that I showed above
– it’s better to create a class which, all on its own, has methods for handing you the string array and then handling the conversion back to an enum, so that’s a possibility too.
That’s for use in your UI so the blinders will start to come off at that point. ;-)
Continued in a subsequent post…
Still lost in code, just at a little higher level.

RFP for Data Warehousing Project

My manager contracted a consultant to come up with an RFP for us. But we are running way behind schedule :(
Does anyone have a sample RFP for a Data Warehousing project for me to have a reference on what is required?
Thanks,
Tamara

Tamara,
I assume this question is not for members of Oracle Warehouse Builder team. Otherwise it'd be a bit awkward - you are asking us for a sample of what to request from us.
Nikolai

Small fonts for Firefox 35.0.1 display badly after Windows Update 2/10/15

After Microsoft did an update (image attached) the display of many small fonts is nasty (image attached). I see it in no other programs including IE. Not all fonts are bad, just some small ones. Everything on your page here looks fine.
Thanks,
Chris

hi chris, this is probably caused by microsoft update kb3013455 which can cause font rendering issues on vista:
<blockquote>After you install security update 3013455, you may notice some text quality degradation in certain scenarios. The problem only occurs on systems that are running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available. </blockquote>
https://support.microsoft.com/kb/3013455

Avoiding change pointers for data with status planned

Hi,
we have to distribute HCM-data, standard infotypes and customer infotypes, into other SAP sytems. One of the receiving systems must not get data with the status planned (istat = 2).
Which would be the best way to avoid planned data in the receiving system? Is it possible to avoid creating change pointers for planned data in the delivering system or have I to delete the planned data in the receiving system while processing the idocs via user-exit?
Best regards
Stefan

Dear Stefan,
You can create the change pointers manually from the IDOC data (e.g.with FM CHANGE_POINTERS_CREATE) during the inbound processing within of the customer-exits of enhancement RHALE001 or within an own BAdI implementation of BAdI HRALE00INBOUND_IDOC.
Or else you can use method IDOC_DATA_FOR_RECEIVER_MODIFY of BAdI HRALE00OUTBOUND_IDOC. In this case please make sure that note 1292241 is implemented.
Hope it helps,
Christine

How can I select a smaller font for all components of a Swing application?

The default size of font in Java Look and Feel is 12, how can I change it to 10 globally for my Swing application ?
Thanks for your help.
Helen

It is not very simple because all components don't use the same fonts and if you don't want to subclass the l&f you can do this :
after setting the l&f (in the main for example)
Font f = new Font("dialog", Font.PLAIN, 11);
UIManager.put("MenuItem.font", f);
UIManager.put("Menu.font", f);
UIManager.put("MenuItem.acceleratorFont", new Font("dialog", Font.PLAIN, 10));
UIManager.put("Label.font", f);
UIManager.put("Button.font", f);
UIManager.put("ToggleButton.font", f);
UIManager.put("ToolTip.font", f);
UIManager.put("List.font", f);
UIManager.put("Table.font", f);
UIManager.put("TextField.font", f);
UIManager.put("ComboBox.font", f);
UIManager.put("RadioButton.font", f);
UIManager.put("CheckBox.font", f);
UIManager.put("RadioButtonMenuItem.font", f);
UIManager.put("CheckBoxMenuItem.font", f);
UIManager.put("TableHeader.font", f);
UIManager.put("Spinner.font", f);
UIManager.put("Panel.font", f);etc...
Denis

Request for Sample SAP Archive Project Plan

Dear SAP Practitioner
My firm is in the mist of planning for SAP Data archiving project. We are looking for sample SAP Data Archiving Project plan and other related documentations. We sincerely hope that you can share for the knowledge of our firm and the rest of the community.
Regards
Leonard
Message was edited by: Leonard Tan

Hi Kenny,
Whenever you create a custom (Z) idoc type and want to trigger idocs for it you would need to use the MASTER_IDOC_DISTRIBUTE function module for the same.
Hence to get some sample programs just do a where used on this function module.
Hope this helps. Also please refer to the link below:
<a href="http://">help.sap.com/saphelp_erp2004/helpdata/en/78/21783151ce11d189570000e829fbbd/frameset.htm</a>
to understand more about not only creating the outbound program using this function module but also about the related SPRO and other configuration.
Regards,
Aditya

Small Font for Date in Project Planning Board

Similar Messages

Maybe you are looking for