Small Network Issue

I have a small network with Time Capsule TC and two Airport Express bases AX.
Everything seems to be working fine, but it makes me crazy to see the Status light of the AXs blinking constantly.
In Airport utility all the base stations show Green Status light, but in the actual AX bases the Status light is blinking yellow, it has wireless Security WAP2.
In other words: what can I do to have AX light solid green?
Thank you

#!/bin/bash
export BROWSER=firefox-aurora
export DE=xfce
exec ck-launch-session dbus-launch openbox-session
openbox autostart makes no references at all

Similar Messages

IMac running 10.9 not rebooting after network issues

This is weird, and while I am going through Apple's Knowledgebase steps - so far without success - I thought I'd post here to see if anyone else experienced a similar issue.
I was having network issues (or what I think/thought were network issues) for about a week. The symptoms looked like high packet loss, i.e. websites would simply not load reliably: sometimes not load at all, sometimes load partially. This started with some smaller websites and eventually it failed to load google and facebook. It took me some time to notice that other devices on the same WiFi did not have this issue, so yesterday I decided to reboot my iMac. Network diagnostics didn't show any issue and I was able to connect to the WiFi router just fine, just not find any websites, so I thought a reboot may fix it.
I have not been able to boot it back up since. It stalls at the grey loading screen with Apple logo and a spinning wheel for ever (I've let it sit for hours). Safe boot does not work, and starting in Verbose mode hangs at "executing fsck_hfs" and it doesn't seem to do anything else. I've booted from the install disc (actually a USB drive) and ran Disk Utility from there, but it showed not disk errors at all. It did repair a handful of permissions (I only saw iBooks related stuff and something about etc/apache2/users), apparently successfully, but it's still not booting.
Disconnecting my external Time Machine drive and unplugging the iMac from my surge protector didn't help, either. I am now creating a new image from the partition just to have an additional backup on top of my Time Machine, and I'm going to try Archive and Install next, which is the next to last step in the Knowledgebase.
I do have two partitions on the Mac (one 10.9 and the other 10.7), by the way, and booting into the older partition seemed to work right away. It's just that I don't have any use for that other partition right now, it's a leftover from back when I migrated to Mavericks.
I am baffled how all of this connects together. Network issues, boot up failure without apparent disk issues? Has anyone else seen anything like this?

I am still working on restoring my iMac with 10.9.
I've cloned the affected partition. I used Disk Utility and it Restored without apparent unto an external drive. So I tried booting from that drive, but I get the same result as booting from the partition directly. Not a major surprise I guess since this is supposed to be an identical copy.
I have also created a dmg image out of the partition, and I was able to open that on my MBP without problems! All the files seem to be there. It seems to be something specific with the, uh, boot sector or, uh, something?
Next, I booted into Single User mode and ran fsck -fy. The Knowledgebase says it's okay to do it if Safe Mode doesn't work, right? The first time it ran, I got conflicting results. It said both
** The volume appears to be OK
**THE VOLUME WAS MODIFIED**
The Knowledgebase seems to suggest that it should only say one or the other?
Running it again, it said
** The volume appears to be OK
Alas, rebooting it still doesn't work, it continues hanging at the Apple logo.

Small network redesign help

Hello,
I work in a small company that has about 75 clients, and about 10 servers, and I have a refurb 4948 that's not setup yet, currently on the live network are asa5510, a sg300, voip system, and an old 2960 that's currently my core sw (the 4948 will replace this) and I'm planning on redesigning our flat network.
We've always had a single collision domain on vlan 1 which I read is not recommended for security, and I was wondering if it's worth the headaches of setting up vlans on this small network (I'm no Cisco veteran, just learned hands on reading forums and guides) So my plan is to finally set up a dmz on the firewall and I'm reading a bit more before I get into that, and put the servers in a vlan on that dmz, I read that the 4948 can do routing so I can probably set inter-vlan on it if needed. Here's a diagram of my planned network, if you guys can give me some guidance on a best way to redesign it I'd totally appreciate it. Thanks in advanced.

Why do you want the servers in a DMZ, are they going to be accessed from the internet ?
I would definitely recommend putting the servers on the 4948 switch has it has much better performance than the 2960. And as you say it can route as well so perhaps it might be an idea to replace the 2960 with the 4948 and then if you do need a DMZ use the 2960 as the DMZ switch.
Ideally you do not want your DMZ switch to have any internal LAN clients on it but that may not be possible for as you may not have enough ports. But you definitely do not want your DMZ switch to be routing, that should be left to the firewall.
In terms of using vlans the answer is it depends. With the number of devices you have it may not be worth doing unless you are experiencing issues at the moment. It is always a good idea to have the servers on a separate vlan because if they are the same vlan a faulty NIC in a client could bring down the servers as well but that said in your setup all the clients would be in the same vlan anyway. And generally people start to consider using vlans when the IP subnet gets to be bigger than a /24 which you are nowhere near.
I presume at the moment you route off the firewall ie. the inside interface of the firewall is the default gateway for the clients and servers ? If you stay with one vlan there is no benefit to routing on the 4948, you may as well just use this as a higher performance switch for the servers/clients.
I can't see a need for vlans here unless you are experiencing performance issues but the 4948 could well sort that out for you.
Perhaps you could clarify the bit about the servers and the DMZ and maybe go a bit more into what you want ?
Jon

WRT1900AC being used in small network

I've been using the WRT 1900 AC in a wireless configuration to support one laptops wireless internet access. Now I'd like to add it to a small network consiting of a laptop that is hard wired to network along with 10 other workstations all wired through a Cisco switch to a file server. Ther file server provides DNS, DHCP and Active Directory services along with access to system files. I've attached the WRT 1900 AC to the network via the Cisco switch using port 1 for the Ethernet connections. My problem is on the laptop I connect wirelessly to the WRT1900AC and can access the internet however I can't access the file server and when I can access the file server I can't access the internet. In my network settings I see two networks. One for the WRT1900AC that shows internet access and one for the file server that shows no internet access. I'm pretty sure there's a problem with where the laptop is getting it's IP address assigned from depending on what it can access. I've tried connecting the router directly to the file server and turning on ICS for that port on the server. The server can then connect to the internet but the wireless laptop can't. I haven't really messed with the other workstations but assume I'll have to do the same thing with them after I determine what needs to be done with the laptop.

Active Directory is heavily meshed with it's DNS Server and it's DNS registration.
The Linksys Smart Wifi firmware is designed to DNS proxy www.linksyssmartwifi.com to Linksys Cloud servers for Smart Wifi services like remote access but it also does this for local access to the router's UI.
If you specify your Active Directory DNS server in the DHCP settings to pass to the client devices AFAIK when you look on the client devices their DNS servers will always be 192.168.1.1 instead of your Active Directory DNS Server.
This breaks DNS registration and causes issues with Active Directory services and DNS resolution.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Need configuration exmamples for 3560 small network

Hello,
I'm currently doing some lab exercises in Packet Tracer.
I'm trying to setup a small network with 2x 3560 switches and 3 vlans. 1 vlan for network management, one vlan for servers and one vlan for users.
I'm running into issues where my lab exercises don't seem to work properly, and i'm not sure what im doing wrong. I learn fairly well "by example" and was wondering if anyone can point me to some examples of such a setup.

further, here is the layout of my lab and the packet tracer file.
here are the configs of my 2 3560. i've cut out ports no important to the lab
CORE 3560
Current configuration : 1399 bytes
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
hostname CORE
ip routing
no ip domain-lookup
interface FastEthernet0/10
switchport access vlan 10
switchport mode access
interface GigabitEthernet0/1
description link_to_closet_switch
switchport trunk allowed vlan 1,10,20
switchport mode trunk
interface Vlan1
ip address 192.168.1.1 255.255.255.0
interface Vlan10
description server_vlan
ip address 192.168.10.1 255.255.255.0
interface Vlan20
description user_vlan
ip address 192.168.20.1 255.255.255.0
ip classless
============
CLOSET 3560
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
hostname CLOSET
ip routing
no ip domain-lookup
interface FastEthernet0/10
switchport access vlan 20
switchport mode access
interface FastEthernet0/11
switchport access vlan 20
switchport mode access
interface GigabitEthernet0/1
description link_to_core_switch
switchport trunk allowed vlan 1,10,20
switchport mode trunk
interface GigabitEthernet0/2
interface Vlan1
ip address 192.168.1.2 255.255.255.0
interface Vlan10
description server_vlan
no ip address
interface Vlan20
description user_vlan
no ip address
ip classless
line con 0
line vty 0 4
login

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

How to resolve network issue or dns to access web page on snow leopard server?

I have my network setup like as follows:
internet > router 1 > ethernet ports > switch > router 2
I have a mac osx snow leopard server connected to "router 1", but it is so slow when accessing a web page hosted on the server from a browser on a workstation connected to either router 1 or router 2?
Is there a problem with my network setup or maybe because I changed the name to newservername.local?

@Jeff and @Camelot,
I think it is a DNS issue. I completely reset the DNS settings on server and the local name with the steps below, but now cannot access the site hosted on the server at all
I used a modified version of http://www.mkahn.com/2010/09/configuring-dns-on-mac-os-x-10-6-snow-leopard-serve r-for-hosting/ to reset the server set
1. Stop DNS Service in Server Admin
2. Close Server Admin
3. Obtain 10.6 DNS Default files (below)
4. Overwrite the DNS files with DNS Default files:
/etc/dns/loggingOptions.conf.apple
/etc/dns/options.conf.apple
/etc/dns/publicView.conf.apple
/var/named/named.ca/etc/named.conf
/var/named/named.local
/var/named/localhost.zone
5. Restart your server
All machines have 1ms ping responses within the network including this snow leopard server that I am trying to setup. There is another test web server that return pages instantly within this network so I doubt it is a network issue, but a DNS issue.

Networking Issues after Upgrading to Windows 8.1

I have a Windows 8 desktop PC that is working fine with my network. I can browse the Internet fine using all major browsers etc. After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error. I normally have to refresh 2-3 times to get a new page to load, sometimes even more. Everything works
fine from a laptop connected at the same time so it isn't an network issue with my provider.
I thought this might be a driver issue with the two on-board Marvell wired network adapters. I wasn't able to rollback the driver to older versions I found on the Internet. I then purchased another network card, Intel Desktop gigabit and the
issue still persists with that adapter. I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled. I tried a new network cable and no luck either. I also tried resetting the IP stack using
the various netsh commands.
After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store. I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
some of the recent guides that are available. That all worked but it didn't fix the networking issues.
I re-installed Windows 8.0 and the networking is now fixed and back to working normal again. I'd like to try again but I think I will have the same problems. I can't imagine why this would be a driver issue as I tried 3 different network adapters
and two installs of Windows 8.1. Any ideas what would be the cause of the Windows 8.1 issue?

HI,
Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
the performance of win8.1.
Please also test this issue in safe mode with networking.
Please refer to:
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
I’d like to share the following article with you:
Wired and wireless network problems
http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
The issue occurs in safe mode as well under Windows 8.1. The motherboard is an Asus P5B Premium, however it works on Windows 8. How would I update the chipset when booted into Windows 8.1? In Device Manager it wasn't allowing me to update
the network drivers as they were newer versions already installed.
Edit: I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.4.0.1026 and the issue still occurs. I am also running the latest BIOS that is available.

Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

Hi all. We're having a odd issue with two guests on our 2012 R2 failover cluster.
In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC. Interestingly, that had no affect on server B's connectivity.
The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.
Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.
Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
Thanks!
George Moore

Hi Sir,
I'v never seen this before .
>>Next step was to live migrate server A to another node. This action did
cause server B to lose its network connection.
They are connecting to same virtual switch ?
First please run cluster validation to check if there is any error .
If it is ok , please try the following items for troubleshooting :
1. shutdown serverA serverB
2. then add another virtual NIC for serverB
3. start server B check if the issue happens to both "old" and "new" virtual NIC .
In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
Best Regards,
Elton Ji
If it is not the answer please unmark it to continue
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

IPhone 4s 64GB Network Issues

I have a iPhone 4s 64GB that has intermident wifi network issues. I have completely restored the phone and am running in factory configuration with only one app installed (ping utility)and am still experiencing the following issue. When using the network (safari, facetime, etc) the network will become unresponsive. If i start a ping from the device the to the network gateway I get no response. If I ping the iPhone from the computer I get no response. If I toggle airplane move on then off everything starts working and the device will start to function normally and respond to pings. This happens continually throughout the day to any network I am connected to. I have received a replacement device and still have the same issue. I have talked to apple numerous times and they still say it is hardware. I have also deployed 100 iphone 4s to our company and hear of similar issues. Has anyone else had this issue or found a resolution? I am a very big advocate of apple products but after this exprience I will no longer be upgrading to the latest and greatest. I have reverted to using my iPhone 4 with ios5 with no issues.
I have attached the console logs from my iphone that retrieved from the iPhone configuration utility from a time when the issue was occuring.
Nov 14 12:07:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2498, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:07:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:07:29 unknown kernel[0] <Debug>:
Nov 14 12:09:05 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:09:05 unknown kernel[0] <Debug>: pmu wake events: wlan
Nov 14 12:09:05 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:09:05 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290545, last update = 1321290444
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983343.00 -300 NO DST in 310
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:09:05 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:09:06 unknown kernel[0] <Debug>: [95599.463363125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
Nov 14 12:09:06 unknown kernel[0] <Debug>: Wakeup Packet: f0cba106a30c0050568952630800450001793a52400080063c29c0a80012c0a801a101bbccfffd1 21b7bd29b0c2c8018fe27ac9b00000101080a1785f7b13ca56e6f17030101403431c2351e7ee3052 e97886a25233433f1f1457a3c8b132c78c218cd508942bce0325b156c8c17222ab30cb4a99331401 b1d1bc0f1c4b8b21752b218d068570e097065786e60062250a26d351e541f5c291e6220cc053b5fd baa2d7abdbe7224eff815b5154dcb783dce8cd9a00a6da15cf4f5565355a80894f1d68cff527f54b 7ad7423fb8f39093a0ef40acf9c2de6eeb492f8f8ae20bd73b61b3a1b2df30cb982b941217fe8a34 08e01045804dc254da191d4b1f3a9d1cea7b9d192e61eda2473aed4a48f6c178c765b1f82c166521 e22a3a408893216761fa77b9388bcec9b2b8cd519ac9c8b053c00889c95b8003420dbb4561300eaf 6f6a59675db183260039f62eed7afb348d9fb3147238e116ad6ac4f1ebf5b22ee99b1cb92a5c3fb3 d43c25db5bfc761ea0feda538b53bedbaa0f948ac7c63f41822a8c5f882b400 (391 bytes)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -47, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2499, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:09:06 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:09:06 unknown lockdownd[22] <Error>: 00386000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:09:08 unknown timed[2618] <Notice>: (Note ) CoreTime: Want active time in 34.48hrs. Need active time in 117.81hrs.
Nov 14 12:09:09 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
Nov 14 12:09:18 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:09:19 from GPS because time is unchanged
Nov 14 12:09:23 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
Nov 14 12:09:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -50, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2523, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:09:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:09:29 unknown kernel[0] <Debug>:
Nov 14 12:11:25 unknown kernel[0] <Debug>: pmu wake events: menu
Nov 14 12:11:25 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:11:25 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290685, last update = 1321290564
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983483.00 -300 NO DST in 310
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:11:26 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2524, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:11:26 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:27 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:11:28 unknown timed[2619] <Notice>: (Note ) CoreTime: Want active time in 34.44hrs. Need active time in 117.78hrs.
Nov 14 12:11:29 unknown configd[14] <Notice>: network configuration changed.
Nov 14 12:11:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:30 unknown CommCenter[17] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Nov 14 12:11:30 unknown CommCenter[17] <Notice>: Scheduling PDP tear down timer for (342983790.026476) (current time == 342983490.026488)
Nov 14 12:11:30 unknown wifid[29] <Error>: WiFi:[342983490.109759]: Client dataaccessd set type to background application
Nov 14 12:11:31 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Could not find the current user principal. Found properties: [{
              "DAV::displayname" = "[<CoreDAVLeafItem: 0xdea1ae0>]: DAV:displayname";
              "DAV::principal-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xf1b79b0>]: DAV:principal-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb4b30>]: DAV:href]
Payload as original URL: [/calendar/dav/[email protected]/user/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
              "urn:ietf:params:xml:ns:caldav:calendar-home-set" = "[[<CoreDAVItemWithHrefChildren: 0xf1b6f30>]: urn:ietf:params:xml:ns:caldavcalendar-home-set]
Number of HREFs: [1]
Unauthenticated: [(null)]";
              "urn:ietf:params:xml:ns:caldav:calendar-user-address-set" = "[[<CoreDAVItemWithHrefChildren: 0xde8f6f0>]: urn:ietf:params:xml:ns:caldavcalendar-user-address-set]
Number of HREFs: [2]
Unauthenticated: [(null)]";
              "urn:ietf:params:xml:ns:caldav:schedule-inbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xde755f0>]: urn:ietf:params:xml:ns:caldavschedule-inbox-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb4de0>]: DAV:href]
Payload as original URL: [/calendar/dav/anyoneemail.com/inbox/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/inbox///[email protected]/calendar/dav/anyoneemail.com/inbox/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
              "urn:ietf:params:xml:ns:caldav:schedule-outbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xdeac3a0>]: urn:ietf:params:xml:ns:caldavschedule-outbox-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb7450>]: DAV:href]
Payload as original URL: [/calendar/dav/anyoneemail.com/outbox/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/outbox///[email protected]/calendar/dav/anyoneemail.com/outbox/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
Nov 14 12:11:32 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|There were some failures changing properties, according to the following response: [[[<CoreDAVResponseItem: 0xf2dfd20>]: DAV:response | Number of HREFs: [1]| Status: [(null)]| Number of prop stats: [1]| Error: [(null)]| Response description: [(null)]| Location: [(null)]]].
Nov 14 12:11:34 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:19 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:38 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:11:39 from GPS because time is unchanged
Nov 14 12:11:42 unknown wifid[29] <Error>: WiFi:[342983502.660924]: Client itunesstored is background application
Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.925022]: Disable WoW requested by "apsd"
Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.927995]: Disable WoW requested by "dataaccessd"
Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Service starting...
Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Locking device
Nov 14 12:13:39 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:13:43 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
Nov 14 12:13:44 unknown lockdownd[22] <Error>: 016b9000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -42, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2667, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:13:48 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:13:48 unknown kernel[0] <Debug>:
Nov 14 12:14:20 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:14:20 unknown kernel[0] <Debug>: pmu wake events: menu
Nov 14 12:14:20 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc199f000]::UIMInitialize - HSIC ports enabled
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983659.00 -300 NO DST in 310
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -40, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2668, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:14:21 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:14:21 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:14:22 unknown profiled[2629] <Notice>: (Note ) profiled: Device unlock notification received
Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:14:23 unknown timed[2631] <Notice>: (Note ) CoreTime: Want active time in 34.39hrs. Need active time in 117.73hrs.
Nov 14 12:14:33 unknown Preferences[1862] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Nov 14 12:14:33 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:14:34 from GPS because time is unchanged
Nov 14 12:14:34 unknown Preferences[1862] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x13d7b0:<VPNBundleController: 0x13d7b0>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Nov 14 12:14:34 unknown com.apple.misd[2635] <Notice>: allowing special port forwarding for test fixtures
Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: attaching to BTServer
Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: posting notification BluetoothAvailabilityChangedNotification
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:15:01 unknown CommCenter[17] <Notice>: removing received message 2147483663
Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Idled.
Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Service stopping.
Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Builtin profile: container2 (sandbox)
Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Container: /private/var/mobile/Applications/E45DB0BB-3802-413A-B858-D5EE2F5C8DFF [69] (sandbox)
Nov 14 12:15:38 unknown wifid[29] <Error>: WiFi:[342983738.764213]: Client itunesstored is background application
Nov 14 12:15:41 unknown UIKitApplication:com.apple.iBooks[0xdd89][2643] <Notice>: DictinaryServices: Dictionary cache was updated
Nov 14 12:19:40 unknown kernel[0] <Debug>: 096088.069853 hsic-baseband::portActionGated: start device 0x00020001 (bus 1 port 2) completed with 0xe00002ed, retrying in 50ms
Nov 14 12:20:50 unknown wifid[29] <Error>: WiFi:[342984050.417001]: Client dataaccessd set type to background application
Nov 14 12:21:11 unknown lockdownd[22] <Error>: 00386000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:21:11 unknown com.apple.mobile.lockdown[22] <Notice>: Could not shutdown SSL connection: -9806
Nov 14 12:21:53 unknown wifid[29] <Error>: WiFi:[342984113.211059]: Client itunesstored is background application
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."} 0xde94790
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Error refreshing properties for account: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |CalDAV refresh task failed wih error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |==== CalDAV refresh FAILED for "email" (8B3B7412-5AB7-4636-85FC-0613452101C4): Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}.
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|CoreDAVPropFindTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:23:24 unknown kernel[0] <Debug>: launchd[2659] Builtin profile: PasteBoard (sandbox)
Nov 14 12:23:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->1
Nov 14 12:23:25 unknown MobileSMS[117] <Error>: clip: empty path.
Nov 14 12:23:25 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:25 users-iPhone MobileSMS[117] <Error>: clip: empty path.
Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."} 0x112d18d0
Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."}
Nov 14 12:23:29 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 1->3
Nov 14 12:23:29 unknown MobileSMS[117] <Warning>: Trying to remove already removed image
Nov 14 12:23:33 unknown MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
Nov 14 12:23:33 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:33 users-iPhone MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xeeb64c0 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xee9e340 "The request timed out."}
Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Nov 14 12:23:45 unknown SpringBoard[15] <Notice>: Connection to the change hub got interrupted.
Nov 14 12:23:49 unknown wifid[29] <Error>: WiFi:[342984229.632067]: Client itunesstored is background application
Nov 14 12:24:28 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:36 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."} 0x1127a260
Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."}
Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."} 0x11257260
Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."}
Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x19b500 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x18d740 "The request timed out."}
Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Builtin profile: container (sandbox)
Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Container: /private/var/mobile/Applications/DD219E23-801C-44FF-A939-FC1E23D7B5CD [69] (sandbox)
Nov 14 12:31:48 unknown Ping[2681] <Warning>: WARNING: Using legacy cell layout due to delegate implementation of tableView:accessoryTypeForRowWithIndexPath: in <myping: 0x161090>. Please remove your implementation of this method and set the cell properties accessoryType and/or editingAccessoryType to move to the new cell layout behavior. This method will no longer be called in a future release.
Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."} 0x2f3eb0
Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."}
Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:33:02 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:33:11 unknown com.apple.misd[2685] <Notice>: allowing special port forwarding for test fixtures
Nov 14 12:33:13 unknown profiled[2686] <Notice>: (Note ) profiled: Service starting...
Nov 14 12:33:13 unknown Preferences[1862] <Warning>: loadAPTableCellImages: loading images
Nov 14 12:33:15 unknown Preferences[1862] <Warning>: -[APSettingsController specifiers]: CMSFLWLAN: _canForget(1), _canSetAutoJoin(0), _canSetAutoLogin(0)
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 1
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType USBHost
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Nov 14 12:33:23 unknown kernel[0] <Debug>: launchd[2688] Builtin profile: ptpd (sandbox)
Nov 14 12:33:23 unknown lockdownd[22] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0xfe164d0 [0x3fced630]>{type = mutable dict, count = 5,
          entries =>
                    1 : <CFString 0xfe2dc20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
                    2 : <CFString 0xfe1cd20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                    4 : <CFString 0xfe2e1b0 [0x3fced630]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0xfe2e1e0 [0x3fced630]>{contents = "89014103254388742359"}
                    11 : <CFString 0xfe2d750 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                    12 : <CFString 0xfe2e280 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
Nov 14 12:33:23 unknown lockdownd[22] <Error>: 00386000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Nov 14 12:33:24 unknown atc[2690] <Warning>: Error: Connection invalid
Nov 14 12:33:28 unknown ptpd[2688] <Notice>: PTP interface has been activated at high speed.
Nov 14 12:33:37 unknown lockdownd[22] <Error>: 0173b000 special_case_get_domain: NN: checking BT MAC Address reported back f0:cb:a1:06:a3:0d
Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.

*228 option 2 might work. All phones can be different.

Small Network Setup Ideas

Looking for some recommendations for those that are more familiar with Linksys products and configuration interface. I would like to setup a small network (3 PC's) and also provide general use wifi utilizing the my businesses DSL connection. Concern - Does Linksys setup allow for me to segment my small network (i.e. 3 pc's) from the general use wifi network. For simplicity purposes I thought I would assign static IP address to my network segment (10.1.x.x range) and want to utilize DHCP for wireless network (different network segment). Also sense this is a shared service, I would like to prioritize my business traffic over the general access. Is this easily accomplished? Regarding the wireless, I only want to provide it to my clients. I suspect I can not broadcast the SSID, but how best to handle this via the Linksys setup? I have been looking at the Linksys Ultra RangePlus Wireless-N Broadband Router Model #: LKS WRT160N. My building has very think concrete walls and I would also like to provide access to an outside patio so I expect that I will likely have to deploy multiple wireless devices to maintain a strong signal. So for those Linksys experts, your advise greatly welcomed. Thanks in advance. TS

you can use WAP4400N for getting good signals from wireless router .... Also you can go for WPC600N (Dual Band Adapter) for good connectivity ....

Small Network Trouble

I am currently trying to setup a small network at my Mothers work and I have ran into a small problem. Here is the situation: I have ten iMac G4 that I have networked together using a NetGear switch. I now need to get internet to these ten computers. The hard part about this is I need the switch to get the internet from an AirPort Extreme in here office and the switch is located down the hallway in another room. I don't have the option of running a sing CAT5 cable from the Base Station to the switch it needs to be done wirelessly. I will include a link to twitpic (http://twitpic.com/1x1xsz) where I have uploaded a diagram that I drew to give you a visualization of my problem.
Any and all suggestions are welcome.
Thanks

Welcome to the discussions!
You might want to explore all the options.
You could use wireless and setup an AirPort Express to "join" the wireless network that the Airport Extreme creates, then enable the ethernet port on the device to feed the switch.
While this should work most of the time, you would be trusting an entire network to a single wireless connection. I would think long and hard about this and use this only if there were no other alternatives.
You could also use a pair of ethernet powerline adapters to transmit the ethernet signal over the AC powerline. Just run an ethernet cable from the AirPort Extreme to an adapter and plug it in the wall. Plug the other adapter in the wall and then run and ethernet cable from the adapter to the switch.
Works great. Faster and more reliable than wireless by far. Newer powerline equipment is almost up to Gigabit speeds...almost as good as running an ethernet cable.
Just make sure that everything is on the same master electrical circuit.
Whichever you decide upon, it would also be a good idea to have a full understanding of the store's return policy in case things don't work out as hoped. Sometimes, it really is worth the extra expense to have the security of a traditional ethernet connection.

Advice for Building Small Network Question

Hello,
I am building a small network environment which will connect to a larger office, scalability is important. We will begin having about 30 users which will all need VOIP services. The VOIP services will be hosted by a cloud provider. My question is as of now I am looking to obtain a Cisco 2921 ISR Router and then a Cisco 2960-X 48Gig POE, and my main question is I am confident the switch can handle the power and operation of the phones but just to make sure I should not run into any problems with the router as far as forwarding the data, correct? Any other comments or suggestions would be appreciated.
Thanks,
Joe

Duplicate post.
Go HERE.

Network issue with initial connections on Hyper-V

This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
so I have set the ArpRetryCount key to 0.
I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
the network? (All of our DNS is AD-integrated running on DC's).
Here is where I'm seeing this:
Internet Explorer- described above
Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
it would obviously not be a DNS problem.
I DON'T see it in GP9 connecting to a datasource
Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
All updates are isntalled, and the firmware is at it's latest revision.
Any ideas?

Hi Daniel,
" This appears to only happen to the Hyper-V guest OS. "
Do you mean that any other hosts can access the network resource normally except these VMs ?
If yes , my suggestion is to disable the VMQ on the physical NIC for the VMs , then try test again .
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Network issue in iPhone 4 on iOS 6, iOS6.0.1, iOS 6.0.2, iOS 6.1, iOS 6.1.1 and iOS6.1.2

Hello,
Ever since I upgraded my iPhone 4 to iOS 6 last year. I am having network issues.
I have been monitoring my wife's android phone whenever I have a network issue on my phone (Both of us use the same provider and the same voice + data plan). The android phone has never had any network issues.
This rules out any issue with the provider and/or network issues.
Sometimes its the cellular data that does not connect or sometimes it doesnt connect to the network at all. I will have to do a cold start to get the phone up and use.
I expected this to be solved in all the subsequest fixes that were released. I am disappointed even with the iOS 6.1.2, the problem still persists.
By phone was superb when i was using it with iOS5. This iOS6 is a big disappointment.
The problem is even more when I am indoor. When everyone around have proper network on their phone, I read "NO SERVICE" on my phone.
My patience is running out now. I have been waiting for the past 5 months (a loyal apple fan) and I think I have to now take a decision. I cant make basic phone calls when I want and its really irritating when I see NO SERVICE when I want to make the call. Most of the time I end up switching the AIRPLANE MODE ON and then OFF to get the network again.
Sometimes the call drops and network goes off if I answer or make a call when my CELLULAR DATA is on (2G or 3G) or on Wifi.
Is there any solution to it?
Ajay.

I had been holding off downloading iOS 6 ever since it was released and today was to be the day... no more.
Thank you for the warning!

Small Network Issue

Similar Messages

Maybe you are looking for