Small Plastic Pieces Replacement Help Please! [Dv4-2165dx] Picture Included

Hello. In 2010 I bought a HP Dv4-2165dx. I really love this computer and would like to repair it.
As you can see in this picture the plastic part that covers these usb hubs and the ac power inlet was broken off. 
I think it comes in a couple pieces. The first part, the long plastic cover, and under this cover there is a small round plastic part too, which you can see in my picture is quite mangled. It is too destroyed to use now.....
Where can I find a replacement piece for this? I can't tell if there are any numbers on it to identify the piece so it has been impossible to find.
Where could I find this small piece? How much do they run in cost? And are the relativly easy to find?
Thanks so much!

Hi,
Sorry I can't see the image. Please use the first manual of the following link to work out part #:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=4125881
Please note: Nowadays they don't sell small pieces, they sell the whole part(s). You may have to buy more than you need. After getting part #, you can eBay OR you can buy from the following site:
   http://partsurfer.hp.com/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Officejet Pro 8500 , false paper jam error message, small plastic piece broken

    product : HP Officejet Pro 8500 All-in-One Printer - A909a
    OS : NA
    Error : (fake) paper jam on printer screen
    I made no change before the issue. It occured while printing 2 pages. The first one was ok, the second one never shows.
    First I spend many time searching after the paper, cleaning my printer etc...
    Then I looked on the internet for advices, ideas etc.
    Endly I found this video : http://www.youtube.com/watch?v=PMFW1RRlDHE
    I checked my printer and I saw the exact same piece as in the video broken...
    I don't print often and I must say that I'm shoked that because if a f... piece worthing nothing all my printer and all the functions are unusable...
    I tried the support to obtain information on how to get this piece replaced. All I got is an automated message saying banalities (expired guaranty) and other links to unrelated things.
    Fortunately there was also a link to here...
    Thanks.
    ps : My feeling is that this piece is made to fail if I believe many post often seen on google (look comments on the video)... 

    The very same thing happened to my 8500 WIreless.  I was printed a two page document and only one page came out.  since that time the printer is stuck in the 'Paper Jam' state.  Call it false or fake, it is simply inaccurate.  I watched the video and located the gear that breaks.  I opened the cover, stuck screwdriver in the sensor to make it think the cover was closed and watched it cycle.  I can clearly see that the white gear on the left is cracked, in fact separated.  The cycle causes the gear to rotate so I could get a good visual on it, even inside it's black housing.    I will now begin my hunt for repair options.

  • Plastic Button Replacement Help

    I have been using my plastic key (under the actual key) since it fell off, so I need to replace it if I can. But I also one of the small prongs or something that the key latches onto is gone so if I can is there a way to replace the metal part and the plastic button?

    Not really. Whole keyboards are inexpensive and much easier to replace than single keys. Give us the model number of the laptop and we can point you to a keyboard and instructions.  

  • ITunes window can't be smaller than 1200x550 px, help please.

    Yeah, so I just bothered with updating iTunes on my Windows 7 machine (that makes it 11.0.3.42), and now, I can't resize the window to get any smaller than 1200 pixel wide, and 550 pixel high. Annoying, as I like to split my screen in two, having some source of entertainment take up one half, and my workplace take up the other half. Any suggestions? Or is there nothing to be done? If so, it seems like a weird design choice.

    Are you using iTunes in a langauage other than Engligsh, like Spanish? You might be seeing what David mentioned here -> iTunes 11.0.3 Can't resize window horizontally
    Try changing the display language in iTunes to Eglish, you can use this as a guide -> iTunes: Changing the display language

  • No loudspeaker audio after iphone4 screen replacement - help please

    Hi All
    I recently replaced the damaged screen of an iPhone4, when it all went back together everything worked fine except for problems with the loudspeaker, which worked perfectly before i started working on it. It is strange though that it will play ring tones perfectly well but no music, video, you tube etc
    Tested speaker by changing ring tone - could hear through loudspeaker ok.
    I am unable to increase (or decrease) the sound bar using the side control buttons (though could when testing with ringtones)
    When making a call, switching to speaker works fine.
    Occasionally hear the first two screen clicks when entering lock code.
    have checked mute isn't switched on.
    Works fine through headphones.
    Have checked all settings regarding to the sound and all are set as expected.
    Have cleaned all contacts with acetone
    Have cleaned speakers with dry brush and air spray.
    Have tried changing the speaker unit with no change (though i didn't think it would make any difference as the call on speaker worked)
    This is now driving me nuts and i was only doing a pal a favour, and could really do without having to try and explain this to him. So any tips/advise or even guesses would be much appreciated.
    Thanks
    Andy

    thats strange that sounds word on certain apps but not on others .... did u happen to try a phone reset // by holding power and home buttons until the device resets and you see the apple logo?

  • 20th Anniversary Macintosh (Tam) Fan Replacement HELP Please

    Hi
    I would like to replace the original cooling fan
    of my TAM (the one located near near the hard drive) because i'ts too noisy.. do you know about some quiet fan that satisfy the
    parameters of the original fan (Voltage, Air Flow) that is suitable
    for replcement?
    Thank You

    Welcome!
    You should hear the fan in my Beige G3 mini-tower! Sounds like practice day at an air show!
    Most computer makers get fans from outside vendors. With other parts, I've looked at the part and recorded any manufacturers' information, then searched the Web for those names and/or numbers to find the specs. Once you have them, matching airflow and electrical requirements are fairly easy.
    I have heard good things about Vantec fans and have their 60mm "Stealth" model set up as an auxiliary PCI card cooler in my G3; it added no additional noise, and came with all the wiring adaptors needed to make the installation more elegant. You don't always get that when buying a "fan in a bag." Another nice Vantec touch not all fans have: airflow direction and fan rotation indicators are moulded into the housing. Makes it harder to install one backwards.
    Remember that some fans advertised a "quiet" do so by moving less air. Not a good thing. That why you are wise to get the original specs.

  • Help Please With Header/Footer Includes

    Can someone please help with an easy to follow answer?
    I am building a site and want to use the header and footer as include files to make maintenance of the links easier. In the header, the navigation is rollover graphics. (I mention this because there is an issue with the image paths.) I have been able to get the includes showing up and working, but my problem is that I wish to use subfolders and it's here I'm going round in circles. The graphic navigation is visible at the root level only.
    My site structure goes like this:
    Root has index.php and a couple of other pages, plus the following directories, css, images, includes (containing my header.php and footer.php), subfolder1 (containing index.php) and subfolder2 (containing index.php).
    The navigation works on the root level but not at the sub-level. I have tried using both document and site relative links, ../ as well as / and./ paths but I can't figure this out.
    My navigation is HOME | SUBFOLDER1 | SUBFOLDER2 | CONTACT | LINKS. Hope this is clear.

    Server side includes are great for doing what your doing.
    Sounds to me like you understand the different types of URLs you can use but you will need "site root relative" urls in your links in your include file.  You will also need to think about the path in your include but I imagine you know that.
    If you have a link in your navigation and it links to a page in a folder then your link must include the full path e.g.
    <li><a href="/pages/cv.php" title="Curriculum Vitae">CV</a></li>
    If your included file is in a folder and not the root you will need to declare its path
    <?php
    include 'pages/menu.php';
    ?>
    If you want a tutorial on this try:
    http://www.communitymx.com/content/article.cfm?cid=AEDCC52C4AD230AD
    http://www.motive.co.nz/glossary/linking.php
    I'm not sure what else to suggest really except that you add a bit of the code from your file and include file?
    Martin

  • I need help please!  Can pictures get on your icloud other ways?  Can something be put on there by someone other than yourself, liked public wifi or hacked?  Got a big problem h some **** on an iPod and I am to knowledgeble about the ipod...thanks

    .         Can pictures get on your icloud other ways?  Can something be put on there by someone other than yourself, liked public wifi or hacked?  Got a big problem with some **** on an iPod and I am to knowledgeble about the ipod...thanks

    You're not confusing this with a shared Photo Stream...?
    Because the short answer is no, photos don't appear unless they were put there by someone with your Apple ID credentials. To rule out that possibility, change your Apple ID password by carefully following all these instructions:
    iCloud: Change your iCloud account password
    If you decide to change your password, and you also want to change your Apple ID, I recommend you do not concurrently change your Apple ID until sufficient time has passed and you are confident the password change has been effected on all your iOS devices. 24 hours ought to be more than enough.
    It is not necessary to change your Apple ID unless it is an email address you no longer wish to use.

  • TS3276 My iPad autmatically deletes all incoming emails after about four hours. They are not in the trash. Help, please!

    My iPad automatically deletes emails after about four hours. They aren't in the trash. Help please!

    See picture:
    http://i1224.photobucket.com/albums/ee374/Diavonex/7a47f8614ce19eb760a2fcbae7f6f 749_zps1900a350.jpg

  • Replace screen on HP Pavilion dv4-2165dx Entertainment Notebook PC

    How do I replace the  screen on HP Pavilion dv4-2165dx Entertainment Notebook PC
    This question was solved.
    View Solution.

    This youtube video is helpful:
    https://www.youtube.com/watch?v=cl7uEN_S0dk
    Where do you live (country)? We can help you find a replacement screen at a good price. 
    if this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Replacing Trackpoint Cap why do the replacements not have the black plastic piece? T420

    So I feel like my trackpoint has begun to wear down on my T420 and I went to replace it today with the similar cap from the Trackpoint Cap Collection (73P2698) that I ordered with my machine. When I removed my cap I was suprised to see that there was a piece of black plastic attached to the underside of the cap. None of the caps in the collection have this plastic piece, and I seem to be unable to remove it from the cap. Without the black plastic piece, the caps don't seem to fit correctly.
    Does anyone have any ideas?
    When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
    My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.
    Solved!
    Go to Solution.

    I'll try to take it out with tweezers. It is really wedged into the cap. Does the stick have a part number? If I accidentally break it will I be able to call have one sent to me under warranty?
    When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
    My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

  • Replace CMOS battery for dv4 - 2165dx laptop

    Please I need help on how to replace CMOS battery for dv4 - 2165dx notebook pc.
    This question was solved.
    View Solution.

    foanti wrote:
    Please I need help on how to replace CMOS battery for dv4 - 2165dx notebook pc.
    Hi,
    Page 54 in this manual: http://h10032.www1.hp.com/ctg/Manual/c01963667.pdf
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

    hello,
    i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

    I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

  • I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

    I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

    a message appears saying that there is a problem with the windows installer.
    What's the precise text of the message please? (There's a few different ones I can think of that you might be getting.)

  • Small configure help please? I have 3 300-28 switches, I want to connect them and avoid stp (stp setup)

    HI!
    I have a small network. I have 3 300-28 cisco switches. I already connected my 3 servers  and clients with the switch 1 and now I want to add more clients and I need to add my other two switches in the network. Please guide me with the simple configuration So I can connect them all and avoid loop (stp). Thanks

    Hi Nagaraja Thanthry!
    Thanks for your reply. I am implementing it tomorrow. By just conecting the switches together at trunk ports  will there be no loop? I don't want my network chowk. I hope it will work well. I might need further help, please reply.
    1. I will do setting on all switches. Assign IP addresses to switches (to Vlan 1 default).
    2. Set one port (e.g 28) as trunk and all others as Access on all three switches.
    3. Then I will connect the switches with each other at trunk ports. Hope there will be no loop in this setting.
    4. Do I need to set any setting for stp in switches ?
    Please reply one by one thanks.
    I am using 192.168.0.1 255.255.255.0 IP range.
    Best Regards,

Maybe you are looking for

  • Unable to set some Signatures back to IDS 4 Default.

    I am in the process of performing the upgrade on the 4210 from 4.x to 5.x. When trying to set the signature back to the IDS 4 defaults the "param src" field still shows the Sensor rather then IDS 4 Defaults. The "prop src" shows the "IDS 4 defaults".

  • Calculating count during previous months

    I am working on a report where we need to track the number of tickets that were open at the end of previous months. I have calculated those tickets that were closed in the same month by comparing the month of the ticket's creation date with that of t

  • I just upgrade my ram to 16g from 4 and my mac mini keeps rebooting

    i just upgraded my mac mini from 4 to 16 g of ram and now it keeps rebooting. Any idea what the problem could be or is it a hardware problem and how to tell?

  • Adding authorization object for "Function Group"s ?

    Is it possible to add any authorization object for any function group ? We have an issue i.e. whenever user "XYZ" is getting some Windows Excel related error whenever trying call an excel report from BW server. System log related to "XYZ" user shows

  • Macbook wont switch on?

    When i try to switch on my macbook nothing happens ans when i plug in my charger it has a faint green light. I have never had this problem before but i have tried many troubleshoots and none would work Please help.