Small Previews in Bridge

Bridge displays previews much smaller that the preview window. This occurs mainly with Illustrator files. I see this has been discussed to some extent, but never resolved.
There is a way to change thumbnail size in the content window. Is there a way to change preview size? I know about the loupe, but loupe view is pixellated and fuzzy.
Thanks for any help.
Fielden

Hi Fielden:
This has been driving me nuts as well, but I think the problem is related to the artboard. What I've found is that if you have ANY content that falls off the artboard, the preview image gets pixellated.
Workaround: expand your artboard to fit all your content. Not an ideal solution, since the "out of bounds" area is often used to place artwork elements that we want to compare, or color swatches, or notes or what-have-you. And we may not want to see that in the Bridge thumbnail.
Workaround 2: create a mask around your artboard.
Note: I'm using Illustrator CS2 for Windows. I *think* CS3 addresses this issue by providing a Crop tool that allows you to define how your thumbnails crop.
Update: Results are inconsistent. After trying the above methods, purging the cache, and re-saving the document with material outside the artboard, my thumb is still cropping to the artboard. Which is fine, I guess. But weird.

Similar Messages

PSD shows small view in bridge but doesn`t open in photoshop..help?

Hydro shuut off and PC too and I can see just the small view in bridge and not full screen but it won`t open in photoshop cs3. Any help would be great. I tried illurstator, and infaview..nothing helped so far. File is 183 mb

I'm sorry to hear of your loss of data.
I'm also sorry to have to say that people can almost never recover damaged PSD files. This is one reason Photoshop CS6 is coming out with an Auto Save function.
Did you save your master file in several different locations, or do you have a backup? Make sure you protect any backed-up files ASAP, before they're overwritten by the corrupted one.
What do you see when you right-click the PSD file, and choose Previous Versions (assuming you have Vista or Win7)?
Under some conditions there's a possibility of recovering a flattened version from a truncated PSD file, depending on how you have your settings (maximize compatibility causes a flattened preview to be saved at the front of the file).
-Noel

Spread Previews in Bridge

I posted a comment/rant about an InDesign feature that was taken away in CS5 in a discussion that focuses soley on Photoshop (See below.) I didn't realize I had done that until today, so I'm reposting it with the hope that someone on the InDesign team at Adobe will read it. The feature that was eliminated was the ability to preview InDesign spreads in Bridge.
I now realize this issue was caused by a change to InDesign and not Bridge as I first thought. I also no longer feel those responsible for making the change should be fired. However, taking a long time out should be considered. Wait, I take that back. This problem wasn't fixed in CS6, so I'm leaning towards my original suggestion.
The original thread: http://feedback.photoshop.com/photoshop_family/topics/viewing_indesign_spread_thumbnails_i n_bridge?utm_content=topic_link&utm_medium=email&utm_source=reply_notification
My original post:
I'm beyond frustrated with Adobe because of this issue. The person(s) who decided to eliminate this feature in CS5/CS5.5 should be fired. Seriously. I realize this is most likely a Bridge issue and not an InDesign one, but these two applications used to work side by side in a way that I, a catalog designer, found extremely useful. I always thought the intention of updating software (and not inexpensive software, I might add) meant new, useful features were being added, not eliminated. I hear Quark is making a comeback. If Adobe keeps selling me downgrades marketed as upgrades, I might have to jump ship.
http://getsatisfaction.com/photoshop_family/topics/viewing_indesign_spread_thumbnails_in_b ridge

We just started testing Cs6 and are finding out the hard way that there is no spread preview in Bridge.. Did you find a work around?
We are a small publisher and use bridge to be able to count pages, see what is finished and not.. and to speed up general layout of the magazine..
I guess we are going to have to go back to Cs4.. because this really bites.. I notice some one said somewhere about a plugin Sneakpreview.. but i have not been able to find it.. Oh we are still working on Win xp pro..

Why is the body/content of all my emails invisible except for a few lines in the small preview pane?

The body/content of my emails is invisible in the large/main part of the screen when using the mail app on my iPad. I can see some of the text from each email in the small preview pane on the left side of the screen (when holding iPad in landscape orientation). The only way I can read the content of an email is to forward or reply and then the body/content appears. How do I fix this problem??

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

16bit Tiff & PSD previews in Bridge not showing correctly

Large multi layered Tiff, PSD and PSB files which have alpha channels, masks and layers, etc. do not show appropriate previews in Bridge (nor Windows for that matter). Many of these are very large 2-4GB, but even a typical 30-60MB file with certain alpha channels and masks are also problematic with previews. I believe the problem appears mostly when the base images ar 16bit since the 8bit version exhibit properly most of the time.
Is this an issue which has a remedy?
Thanks,
Doug A
Photoshop CS5, Windows 7, 64bit.

As Jeff said, this should fix the very large files, but I would recommend to post in the Bridge forum, or on http://feedback.photoshop.com if you still have trouble with 30 -60 Mb files.

Problems getting previews in Bridge to reflect changes made in Camera Raw

I have updated both my photoshop and camera raw to the most recent. I have purged cache and still when I make changes to an image in camera raw it is not reflected in the previews in Bridge. Anyone else having this issue? or perhaps know how to fix it?

That was it! I had to change workspaces to get the bridge preview setting buttons to come up but once I found it this was the issue. Thanks so much!

Canon 5d2 DNG +custom profiles = bad preview in Bridge?

I'm using DNG Profile Editor (1.0.0.39 Beta 2) to make custom profiles for my new Canon 5D Mark II, and then using DNG Converter (5.2) plus Photoshop CS3 Bridge to process images. All on Windows XP.
After my 5D2 custom profiles were in place I noticed that the image preview in Bridge CS3 was "bad." The Bridge preview is very blurry and does not update when changes are made to the DNG file via ACR. For example, if I change exposure in ACR and click "Done" or "Open in Photoshop, the change is saved OK in the DNG file but the Bridge preview remains the original blurry image.
Took a long time to figure this out because I did not immediately associate the problem with the creation of custom profiles. Older 5D2 DNG files previewed OK in Bridge, as did DNG files from my other cameras. I even re-converted some old camera raw files to DNG and they previewed OK in Bridge. There are custom profiles in place for those older cameras.
I spent a lot of time on the usual suspects - purging cache, reseting preferences. All to no avail. Then I removed all my custom profiles and deleted the index.dat file. Ran DNG converter again to make new DNG files from the 5D2 raw. Now the Bridge preview was OK. Then I restored my custom profiles and converted raw to DNG again, getting bad Bridge previews again. Yet the previous converted files would still preview OK in Bridge.
My conclusion: The DNG converter is using camera profiles during the conversion, and in the case of 5D Mark II raw files is creating an error. I'm guessing it is putting an embedded jpeg in the DNG file that somehow confuses Bridge.
I've repeated the tests many times now. I've changed the DNG Converter "jpeg preview" preference to none, medium and full. For the 5D2 files I get bad Bridge previews on all settings. But I get good Bridge previews on my Canon 20D and Canon 1Ds DNG files regardless of any settings. Regardless of the presence or absence of custom profiles, regardless of the jpeg preview size, regardless of the ACR default settings.
So I'm hoping the Adobe team can take a look at this. Or anyone willing to confirm or deny my tests. I don't have an easy way to post a DNG file, but could email one of my "bad" ones to anyone willing to take a look.

The lack of response to this post forced me to keep testing. Now I've more closely pinpointed the problem and found an easy work around. First some background.
ACR camera profiles are stored in two places. The Adobe supplied profiles are in:
C:\Documents and Settings\All Users\Application Data\Adobe\CameraRaw\CameraProfiles
and your custom profiles are in:
C:\Documents and Settings\yourusername\Application Data\Adobe\CameraRaw\CameraProfiles
Adobe Camera Raw, and it turns out the DNG Converter, both build an Index.dat file in this last folder. Apparently this index is built by scanning both camera profile directory trees and building a list of all the profiles it finds. It then sorts that list alphabetically by the profile name that is embedded in the file, not the Windows file name.
The "Adobe Standard" profile for a camera has a file name like "Canon EOS 5D Mark II Adobe Standard.dcp", but embedded in that file is the profile name of just "Adobe Standard". That's why only "Adobe Standard" shows up in the drop down list of profiles in ACR. And that's why "Adobe Standard" appears before "Camera Faithful", which appears before "Camera Landscape". It's alphabetical order.
Now, when you create a custom profile with the DNG Profile Editor, the "Export" function puts "Canon EOS 5D Mark II" on the front of the name. If you are an idiot, like me, you type over all that with something simple like "5D2 Bouce Flash" for the profile name. But wait, "5D2 Bounce Flash" sorts alphabetically before "Adobe Standard" and appears first in the ACR drop down menu. Sounds OK so far.
But then the magic occurs. The DNG converter uses the camera profiles. It actually accesses that Index.dat file, and if it does not exist, the DNG converter will rebuild it, just like ACR. Why it does that I can't imagine. Seems to me that the DNG converter should be simply converting raw to DNG and passing the EXIF and embedded camera jpeg along as is. What need does it have for camera profiles?
Anyhow, if that 5D2 profile is first in the list due to its alpahbetical name, the resulting DNG file will confuse Bridge. Bridge will display a fuzzy preview and will never update that preview, or the thumbnail, when you make adjustments in ACR.
But if you name the 5D2 custom profile such that it sorts alphabetically after "Adobe Standard", then all is OK. The DNG files can be previewed and thumbed OK by Bridge. So I named my custom profile "My 5D2 Bounce Flash", a simple workaround.
Now I can move on to more important things. Like generating a good custom profile for the 5D2. So far the Adobe Standard profile beats anything I've generated. Especailly if I remove that curious Point Curve which can sometimes muck up the shadows.
And now that Bridge previews are "OK" I can work on the mystery of why Bridge Previews of 5D2 DNG files do not match the previews of their equivalent TIF or PSD files. If you're curious you can see samples and read more about that here: http://forums.dpreview.com/forums/read.asp?forum=1032&message=30748423

No image preview in Bridge and unable to write meta data files

I recently converted my CR2 files to DNG files using the DNG converter. For the most part it worked. However, for some files, something went wrong. When I looked at a folder of newly converted dng files using Bridge, I noticed that some files didn't have a preview. These same files won't allow meta data to be written either. Are these files corrupt? What is wrong and how do I fix it? I tried to open these files in CR and they do open. Wierd thing is that if I open the file in CR, then click save file as dng, it will then show a preview in Bridge.

Yes. The original RAW file (CR2) allows me to write metadata. In fact, if I write the metadata to the CR2 file first, then convert to DNG, all the metadata is there - even for the files that at first do not have a preview in Bridge.
But the reason I'm converting to DNG is because I want my original archive files to be in a non-propriatory format.
Even though I can get around the current issues of no preview and writing metadata, my main concern is whether or not there is a problem with the conversion. I don't want to find out later that the file is corrupt. I'm worried that the issues with previewing and writing metadata are symptoms of some bigger problem.
Any ideas?

Previews in Bridge CS5 not updating with changes in Photoshop CS5

The changes I make to a file in Photoshop are not updating in the same files previewed in Bridge. The Refresh button does not make a difference. Is this to do with Cache settings or some other Preferences perhaps?
How do I make my images in Bridge become accurate representations of my files being edited in Photoshop?

I am aware of the delay in writing the cache. It only took one stuffed-up rename to make sure I was aware of that in CS3 Bridge. I use many different camera bodies and have to sort the images into Date Created order to rename them. If Bridge hasn't finished reading all the EXIF data, the images will not be in the correct order and will rename out of order.
The xmp files are all created the first time I open the RAW files in ACR to do my edit. Prior to this, they don't exist, so if I see they exist, I don't need to check their creation date. This only changes if I am editing previously edited RAW files and I don't do that often. Once is usually enough when dealing with that many files.
There shouldn't be a problem with 10,000 RAW files as the cache is set to 50GB and Adobe shows this as 500,000 files. I know that is basically JPEG files. A corrupt cache is not the same thing as corrupt RAW files, and there are several copies of the RAW files anyway as a good back-up strategy requires.
Neither of my swap files/scratch pads are on RAID drives so I doubt this is the problem. I don't recall Bridge ever using more than 25% of the CPU Resources either. It's a 32-bit program anyway and probablky won't use all four cores of the Quad-core CPU...I might be wrong there, but I haven't noticed it doing so anyway.
My WPI figures were much higher when I was running a RAID0 Boot Disc, but one disc went belly-up and I decided against a RAID primary boot disc after that.
I'm sure that there are lots of people out there with lesser-spec'd computers who are not having the same problem. Equally, I'm sure that there are others out there with the same or similar problems. I'd like to hear from them about what they have done to eliminate the problem, or are we all doing work-arounds because Adobe haven't fixed a bug. I appreciate your attempts to help with this issue Curt, so don't feel that I'm simply dismissing your suggestions. I am hopeful though that someone who uses their system and CS5 in ways similar to me might have encountered and solved this issue.
Screen capture showing the Resource Monitor. Bridge going flat-out using only 7% of CPU and very little RAM. I have hardware rendering enabled.

Previews in Bridge & Vista -- can't compare .psd files because...

Vista won't show me a preview and Bridge only opens with one window.
It's important for me to clean out my backup by making sure that I have the most recent graphic file stored (I have multiple copies of files backed up at different times). I can't do this easily because I can't see .psd previews in Vista, and I can only open Bridge once. Therefore, I can't compare files that are in different locations & on different hard drives next to each other. Does anyone have a solution for this? (btw, I don't think Bridge is that hot of a program -- it's not very flexible and all it does is crash.)
Camille

Thanks to all for your suggestions. I reduced Bridge to compact mode & could then open multiple windows. I spent all morning cleaning & organizing my drives! I have a few more questions, though:
1. When you're looking at the folders in Bridge, all you see is a blank folder. It doesn't show a graphic of what's inside the folder the way that Vista does. Is there a way to get Bridge to do that?
2. When you're looking at folders in Vista, most graphic file formats generate a view of the image. But if the folder has Photoshop files in it, all you see is a .psd icon. I'm assuming there is no way to generate a view of a .psd file in Vista. But, even when I'm in Photoshop and doing something basic, such as opening a file, I don't get a view of the image (only an icon) unless I actually click on the file, then a view appears in the dialog box. I don't understand why the .psd files don't generate images in the program itself. I thought it might be a setting in my hardware that's not turned on, because this just doesn't make sense to me.
Thank you.

APERTURE: Small preview images do not show the changes.

excuse my lousy english...
Problem with Aperture:
Small preview images do not show the changes.
I use Aperture 3 since August 2010. By November and 10 projects later it ran normally.
Since the project 11 are in the preview images shown (on the bottom bar in the shared representation) and in the pictures in the books no adjustments. I change for example a picture in b / w it remains in the small preview images bunt even though the great View Erbild s / w is. Even in the books then the famous picture colorful and even grobpixelig.
This is of course in the processing of multiple images per project huntert pretty annoying to have no overview of processed images ...:-(
I had a third installed for books and not as close a relationship.
Does anyone have similar experience or know someone how can I fix this?
Thanks for reading!
Lokoe

Lokoe,
To make sure we understand:
I change for example a picture in b / w it remains in the small preview images bunt even though the *great View Erbild s / w is*.
I am not sure what "s/w" is, but I think you mean:
"I change picture to black and white and the small preview images remain *in color* even though the *big picture in the Viewer* is in B/W."
Even in the books then the famous picture colorful and even grobpixelig.
"In the books the selected picture is colorful and even ???"
"Grobpixelig" -> "grosspixelig" -> "Looks like big pixels???" Not quite sure of the translation. It's been 15 years since I spoke Deutsch!
nathan

Previews in Bridge CS5 are not sharp

The preview panel images in Bridge CS5 are not sharp (almost blurry). Also when I select a thumb and view it using the space bar method (from within the Bridge) the image doesn't appear sharp. Anybody have an idea why? They look fine in Bridge CS4. I've been looking for a preference setting to no avail. Doesn't matter if it's RAW or JPG (same results).
When I select an image and view it using the space bar method (while in the finder) it looks sharp/normal.
Thanks.

[I've replied to the wrong thread, but this is still relevant]
The soft previews also affect raw images which have been cropped within Camera Raw. The 100% preview within Bridge looks soft compared to when editing in Camera Raw.
Raw images which haven't been cropped look sharp at 100% magnification, but not fit-to-screen.
The raw files I'm dealing with are CR2, not DNG. However, I converted one to DNG and tried the full size jpeg preview option, but it looks the same. Even if it did work, it would mean converting all CR2 files to DNG, which is a lot of extra work to get round this one problem.
Here's what I'm seeing. They are both viewed at 100%. The first file shows a screen capture of the Bridge preview, the second within Camera Raw. Again, the raw files are cropped images, which seems to cause this 100% preview problem.
http://img22.imageshack.us/img22/7183/bridgepreview100.png
http://img16.imageshack.us/img16/4445/cameraraw100.png
Message was edited by: ja3754

Incopy Preview in Bridge

Does anyone know how to make Incopy stories preview in Bridge. Currently, when I look at my Incopy stories in Bridge, I see a preview of the first page of the Indesign file. I actually need to see a preview of the Incopy story.

You have to have the correct version of Adobe Camera Raw for your camera.
Check in the Adobe Camera Raw forum.

Template Video Preview in Bridge

How can I attach video preview to *.aet files for preview in Bridge?
Thanks and Regards
Abhay Sharma

Todd_Kopriva wrote:
The way of doing this is undocumented and unsupported because it is both fragile and difficult. If you want this feature, please do as Ben suggests and submit a feature request.
No truer words were ever said. None of the ones I created years ago stayed working for long. It would be a nice feature request.

Why are previews in Bridge blurry (not rendering properly)?

Why are previews in Bridge blurry (not rendering properly)?
I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
Hope this helps others.

Why are previews in Bridge blurry (not rendering properly)?
I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
Hope this helps others.

Small Previews in Bridge

Similar Messages

Maybe you are looking for