Small problem with desktop

When I chose desktop picture from my pictures folder (by clicking on plus and browsing the picture in desktop preferences) it doesn't show previews in some of the folders - it shows empty icons without pictures. I know it's not a major problem but still irritating. Does anyone know why this can be and how to fix it? (when I open same folders with finder everything is shown normally)

Make sure you have connect the speaker jack in green color out port which is back on the tower.
Now perform this steps.
Step1 Changes audio settings in BIOS
1. To enter the BIOS, turn on the computer and begin pressing the F10 or F1 key
repeatedly untila BIOS Setup screenopens.
2. In the BIOS Setup screen, press the F5 key.
3. Select yesor OK(press the Enter key).
4. Press the F10 key. Select yes or OK to save the default settings (press
the Enter key).
5. Start the computer and check for sound. If there is still no sound,
continue with these steps.
6. Use the Left and Right Arrow keys to select the advanced tab.
7. Find and select the advanced menu items that correspond to audio. This
may be one of the following:
8. Onboard Audio, Onboard Audio Options, I/O Device Configuration, On-board
Sound, Audio Codec
9.Select either Enabled or disabled depending on the computer configuration
and press Enter.
10. Press Enter to save and exit and check for sound.

Similar Messages

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I have a small problem with MSI GF4 MX 420

Hi,
I have a small problem with MSI G4MX420-T(S+C) ( MS-8878 ). Exactly with nVidia WDM Video Capture (universal), which " can't be turned on " by Windows XP.
I have also new drivers ...
Could someone help me?
Asus A7V333
Athlon 1700+
128 MB RAM
Thanks !!!

If you only have 10 seconds of content in a 15-second composition, then you need to either add more content or shorten your composition.
You can shorten the composition by changing the duration in the composition settings.
Since you're obviously very new to After Effects, I very strongly recommend that you start here to learn After Effects.

Some small problems with my new 3G iPhone

Having some small problems with my new iPhone, nothing major, just annoying.
1. When I plug my iPhone in to charge/sync my Adobe photoshop keeps trying to download the photos on my iPhone, which causes an error message from Adobe that it can't download and it stops all syncing and removes my iPhone from iTunes. I have to unplug and reinsert USB cable and sometimes it works ok and sometimes I have to reinsert again. Also when charging, it will disconnect, reconnect and the samething all over again, photoshop trying to get photos and an error message.
2. Can't send e-mails via 3G? Only can get, have to connected to a WiFi to send e-mails, or is this normal?

When your iPhone includes photos in the Camera Roll, it is also detected as a digital camera when connected to your computer, and whichever app you have selected to import photos will automatically launch to import the photos. If you haven't imported these photos, it is a good idea to do so as with any other digital camera. I import the photos followed by deleting the photos from the iPhone after the import process is complete. If I want any of the imported photos available on my iPhone for viewing, I add the photos to an existing album that is selected to be transferred to my iPhone under the Photos tab for my iPhone sync preferences, or add the photos to a new album followed by selecting the album under the Photos tab followed by a sync.
If your iPhone's Camera Roll does not include any photos that have not been imported, Adobe Photoshop should not launch automatically when your iPhone is connected.
I know how to disable the selected application for photo import from launching automatically regardless with a Mac, but not with Windows.
Regarding the sending email problem, who is the email account provider and does the email account provider have an authenticated SMTP server?
Most ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection unless the SMTP server is authenticated. When connected to the internet via AT&T's cellular network, it is no different in this regard. AT&T's SMTP server is included and available by default for use with an email account that does not have an authenticated SMTP server when connected to the internet via AT&T's cellular network, but you probably won't be able to use this SMTP server for sending messages with the account when connected to the internet with your ISP via an available wi-fi network - especially if the email account is provided by your ISP.
I access two email accounts with the iPhone's mail client and both accounts have an authenticated SMTP server. I've never had any problems sending with either account regardless the ISP being used for an available wi-fi network, or when connected via AT&T's cellular network.

Problem with desktop aplication

Hello, I have a problem with logging in creative cloud desktop applications.
when I enter an Adobe ID and password, so do not register the application and return me back to re-enter your username and password, and so forth ..

http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Volume problem with Desktop Theatre 5.1 DTT2200

Hi,
I'm experiencing problems with my Desktop Theatre 5.1 DTT2200's volume. It goes up and down with no sense. Doesn't matter if I'm watching a movie, listening to music, playing games or whatever. The speaker system is connected to a SB Live! Sound card but even if I disconnect it and I use the onboard sound plugs it is still happenning the same problem.
Can anyone help me with this?
Thanks in advance!

I Have the same problem, really a shame cause the soundquality is very good, but if i have too keep adjusting the volume it's not really serving it's purpose.
The potmeter of the volumecontrol is malfunctioning. You could try disasssembling it and clean it but that didn't work for me till yet. Best is to replace the potmeter but it is impossible to find a replacement. I'm told it's a very (too) cheap component unsuitable for frequent use so i think Creative shouldn't had used it in the first place. I'm told it's a ct. component fot the far east.
I contacted Creative but they can't supply me with a substitution, either a potmeter or volumecontrol.
The volume control can't be found elsewhere because Creative designed their own connector i think.
Guess i have to annoy the crap out of myself before i buy another set.

Timezone problem with Desktop 6.2 calandar and outlook 2007 after HotSync

After recently being upgraded to Desktop 6.2 I have a problem with Hotsync Palm-calendar and outlook 2007.
When I create a new appointment in outlook 2007 and next do a HotSync it is stored in PalmTungsten-E2 calendar with a timezone CEST (=2 hours earlier than it should be).
At least I won't be late for these appointments, but its a bit annoying.
I already tapped and untapped the box -New events use time zones- in the Calendar Preferences, but that does not help.
Louis
Post relates to: Tungsten E2
This question was solved.
View Solution.

Thanks Colapop for you suggestion.
I had already tried that option and it gave no good result.
Yesterday I bought KeySuite from Chapure and now everything works fine again.
I do regret a bit I upgraded to PalmDesktop 6.2 because that was the start of my problems. The reason for updating to 6,2 was that I wanted to make use of outlook 2007 instead of palmCalender.
Cheers
LouisK100

Problem with Desktop sync with Torch 9810

I recently acquired a Torch 9810 (upgrading from a Curve 8900).
Sometimes, when I try to sync the Torch using my Macintosh (OS 10.6.8) I have the following problems:
1. When backing up calendars the desktop software warns me that if I continue 487 entries will be deleted on my desktop computer. But I have the Blackberry and my Mac iCal program set so as not to delete old files. There seems not to be an option just to update the Blackberry and leave my desktop computer alone. The choice seems simply to sync or not to sync. How can I ask Blackberry Desktop to modify my handheld device ONLY?
2. If I try to cancel a "sync" functions, sometimes the program just hangs, then I have to use "Force Quit."
3. Then when I reconnect the Blackberry the Mac OS tells me the Blackberry memory is corrupted and I should re-format the disk.
I did not have this problem with my Curve 8900. What is happening? How can I prevent this from happening again?
Eric

hello,
there is an article in the public knowledge base :
http://www.blackberry.com/btsc/KB14924
"Error Encountered 0x8004FD2B, Check Documentation"
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

A small problem with my Zen Xtra 60 turned into a bigger problem. Help me save it

What started as a small problem has grown to a big mess. My Zen xtra 60 GB unit started going to "Rebuilding Library" often. With 5000 Wma's on it, this rebuild was taking 30 minutes. So what I attempted to fix with reloading firmware to recognize the new Windows Media Player version, has left me with a dead unit.
I have followed many of the solutions, that have been able to fix other peoples units, but to no avail. While my computer sees the unit, none of the firmware loads will see the player. I fixed what was said in the register. Went through the 4 options of the "Rescue Mode" on the player, followed several of the knowledge notes on procedures, including hooking unit up to a new Dell Laptop. Exactly the same problem happens on a different computer.
I guess my first step is to get the computer to see the MP3 player when I run a firmware install.
Tell me what to do to save my little player.
Thanks Scott

peschli wrote:
. . . if I don't use [my 30GB Zen Xtra] for day, it re-builds my library and half of the songs are disappeared and also so the "memoryplace" . . .
I've had a similar experience, but to a degree. I've found that if I don't use my <EM>40GB</EM> Zen Xtra for more than one day the player will "re-build" the library... but in my case once the library has been re-built it plays just fine; none of my songs or memory are lost.
Why does the player have to "re-build" the library if the player is not used for a period of time?

Recursive mergeSort... small problem with infinate recursion.

Basically, I have made a recursive mergeSort method, but there is a small problem...im getting stuck with an eternal recursion, which is obviously followed up swiftly by a stack flow error, problem is I cant see where im going wrong...
The error reads, "Exception in thread "main" java.lang.StackOverflowError at part3.mergeSort(part3.java:56)"
Heres the code... any help is highly appreciated, as I am new to java, and this is for university.
public class part3
    public static void main(String[] args)
      // Declare array of unsorted values.
      int[] values = {1,3,5,7,9,2,4,6,8,10};
      // Display unsorted values on screen.
      System.out.println("Unsorted Values");
      for(int i= 0;i < values.length; i++)
           System.out.println(values);
mergeSort(values, values.length);
output(values);
public static void mergeSort(int[] vals, int n)
// Declare necessary values
int lowCount, highCount;
int[] low, high;
int i, j, k;
if (n > 1)
          low = new int[n];
          high = new int[n];
          for(i=0,j=0,k=0; i < n; i++)
               if(vals[i] < low.length)
                    low[j] = vals[i];
                    j++;
               else
                    high[k] = vals[i];
                    k++;
          lowCount = j;
          highCount= k;
          mergeSort(low, lowCount);
          mergeSort(high, highCount);
          for(i = 0; i < lowCount; i++)
               vals[i] = low[i];
          for(i = 0; i < highCount; i++)
               vals[i+lowCount] = high[i];
public static void output(int[] data)
for(int i = 0; i < data.length; i++)
     System.out.print(data[i] + " ");
          System.out.println();

yes sorry, that was it, when i put that code in my class... i get an acception in thread main...
heres the code i now have...
I know i need to add a main method, but im completely unsure of what I need to put inside the main method, if you get what i mean...
sorry for all the hassle... :(
public class part3
     * Mergesort algorithm.
     * @param a an array of Comparable items.
    public static void mergeSort( Comparable [ ] a ) {
        Comparable [ ] tmpArray = new Comparable[ a.length ];
        mergeSort( a, tmpArray, 0, a.length - 1 );
     * Internal method that makes recursive calls.
     * @param a an array of Comparable items.
     * @param tmpArray an array to place the merged result.
     * @param left the left-most index of the subarray.
     * @param right the right-most index of the subarray.
    private static void mergeSort( Comparable [ ] a, Comparable [ ] tmpArray,
            int left, int right ) {
        if( left < right ) {
            int center = ( left + right ) / 2;
            mergeSort( a, tmpArray, left, center );
            mergeSort( a, tmpArray, center + 1, right );
            merge( a, tmpArray, left, center + 1, right );
     * Internal method that merges two sorted halves of a subarray.
     * @param a an array of Comparable items.
     * @param tmpArray an array to place the merged result.
     * @param leftPos the left-most index of the subarray.
     * @param rightPos the index of the start of the second half.
     * @param rightEnd the right-most index of the subarray.
    private static void merge( Comparable [ ] a, Comparable [ ] tmpArray,
            int leftPos, int rightPos, int rightEnd ) {
        int leftEnd = rightPos - 1;
        int tmpPos = leftPos;
        int numElements = rightEnd - leftPos + 1;
        // Main loop
        while( leftPos <= leftEnd && rightPos <= rightEnd )
            if( a[ leftPos ].compareTo( a[ rightPos ] ) <= 0 )
                tmpArray[ tmpPos++ ] = a[ leftPos++ ];
            else
                tmpArray[ tmpPos++ ] = a[ rightPos++ ];
        while( leftPos <= leftEnd )    // Copy rest of first half
            tmpArray[ tmpPos++ ] = a[ leftPos++ ];
        while( rightPos <= rightEnd ) // Copy rest of right half
            tmpArray[ tmpPos++ ] = a[ rightPos++ ];
        // Copy tmpArray back
        for( int i = 0; i < numElements; i++, rightEnd-- )
            a[ rightEnd ] = tmpArray[ rightEnd ];
}

Problems with desktop/app sharing/viewing through conference

We have a problem with viewing shared desktop/app with external contacts in a conference. We're able to share/view desktop/app directly with an external users, but not in a conference. We get the error message: "Sharing failed to connect due to network
issues. Try again later."
If we're using the web app on the same computer where we have the problem, we're able to view the content in the conference.
It's working fine internally, it's also working fine when users are outside of our office.
All other functions in Lync are working fine.
We have 1 standard Lync server and 1 Edge, we don't have a reverse proxy but multiple IPs with port forward to corresponding ports on each server.
How does the Lync client connect the shared content?

To Fix your issue, you can follow below steps
A common root cause for this error occurs when required ports are not available. Begin troubleshooting by verifying required ports.
Public --> Edge server:
TCP/443
UDP/3478
TCP/50,000-59,999 (Outbound only)
Determining External A/V Firewall and Port Requirements
Topologies for External User Access
From the Front End pool to the internal Edge:
TCP/5062
TCP/443
UDP/3478
From the internal Edge to the Front End Pool:
TCP/5065
TCP/49152-65335 (Inbound/Outbound)
Ports and Protocols for Internal Servers
From the internal Client to the internal Edge:
TCP - 443
UDP – 3478
Also you can refer below link
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Small problem with applescript

Hello Again,
Every day I use a morning script to launch my programs I have to use... and some more things...
Aldo I have a problem with Golive.
When I try to type activate in the editor it makes a bigg A.
Also with cut and past.
and when i run the applescript-program it does all I need ( The golive part is at the end... but when I place it in the middle it's just stops.
I get this fault message : Can't continue <event Coreactv>
and i guess it has something to do with the A-ctivate
Is this a bugg? Or can someone explain this?
I would like to do more after launching Golive..
tell application "Extensis Suitcase X1"
activate
end tell
tell application "Mail"
activate
end tell
tell application "Adobe Photoshop CS"
activate
end tell
tell application "QuarkXPress Passport"
activate
end tell
tell application "Adobe GoLive CS"
Activate
end tell

Some apps don't respond well to tell blocks. I don't have that app to test, but you could try using something like launch "TextEdit" or tell app "Finder" to open posix file "/Applications/TextEdit.app" to improve your results. Sometimes an ignoring application responses block can help too.

Strange problem with desktop applications randomly freezing

Hi guys,
Over the past two weeks I've noticed that a few, very specific applications, have been crashing horrifically for me. Specifically, they're Firefox, Chromium and Eclipse and anything else powered by Java as well. I found the Eclipse issue people talked about on here regarding the upgrade to Xulrunner, but they only partially fix my problem.
What happens is the applications will randomly freeze, completely. The gui locks up and the window becomes a grey box, and the only way I can get rid of the window is with kill -9.
I've tried figuring out what's wrong, but honestly I have no idea. I'm running 32bit Arch, with a Nvidia 8800GTX card on the official binary drivers, using Openbox. Everything as of the time of this post is up to date throug Pacman.
Also, with the amount of problems I'm seeing on Gnome3 in here, what about creating a temporary sub-forum to hold them all? It would certainly tidy this one up a lot.

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Resolution problems with desktop pictures?

at the beginning of ml my high resolution images, 60 mgb. were ok. now if I choose a vertical image to fit the screen, the image shows highly noticeable pixelation. that did not happen in lion, mountain lion 18.8.1, nor in snow leopard. also is happening in the last update of lion 10.7.5. has anyone told apple this annoying problem?. there is also another problem, and this one is real big. black and white images show color, like when you saturate too much an image on "hue and saturation" in photoshop. I think this problem has to do with color sync.
Beltran

Go to ~/Library/Preferences. Move the com.apple.desktop.plist file from the Preferences folder to the Trash. Restart your Mac.
See if that helps...
~ (Tilde) represents your Home folder.

Small problem with desktop

Similar Messages

Maybe you are looking for