Small scare, but running 1.1.4 now
I haven't had a bit of trouble with any updates so far, so I wasn't expecting any tonight. However, I had a bit of a bump in the road. Downloaded the update, and started installing...everything seemed to go OK until it restarted the phone. I got an error message I've never read about here before: "iTunes could not connect to iPhone "SisterBlue's iPhone" because the pairing record is missing."
I clicked OK (my only option, really), and my phone began to display the dreaded iTunes/cable graphic. Uh oh. Restarted the phone while still connected, and got the same graphic on the phone, but the error message in iTunes changed to "blah blah you need to enter your passcode". Well, obviously, I couldn't enter my passcode on the phone because it only wanted iTunes. So, I unplugged the phone, closed iTunes, restarted iTunes, plugged the phone back in, and I got my passcode screen. Entered my passcode, got the "phone activated" message, and everything seems to be A-OK now.
Not sure exactly what happened...or even exactly what fixed it...but I'm glad we're up and running again with no major damage.
Anyone else ever seen that error message, or know what I might have done wrong?
-SB
LOL...my 15 year old tech smarts (which happened 20 years ago, FYI) landed on the "try the restart first" side of the fence...
-SB
Similar Messages
-
My iMac (intel based) all aluminum, OSx 10.6.8, 2.5 GHz Processor, bought about 6 months ago. It was working fine till now. Last few days a hazy blur patch appears in the center of the screen. It's growing with each passing day. How can I get rid of it? Pl help me to understand the problem and the right solutio.
Thanks in advance.Did you buy this from an individual, retail computer business or Apple reseller?
Do you have or did you get any type of warranty?
Before I make an assumption that there is something wrong with the LCD screen.
Both sides of the iMac's protective glass may just need cleaning.
The protective glass on your iMac is held on by strong magnets.
Power down and unplug the iMac.
You need two small suction cups to remove the glass from the iMac.
These suction cups maybe able to be found in hardware store or home improvement store.
These suction cups are of the type that can be used on window panes to hold small ornaments or hanging items attached to the window glass.
Place the suction cups at top right and left sides of the glass, make strong suction with the cups and slowly pull the glass forward toward you.
Once you have the top loose, grab the top opposite sides of the glass and pull the rest of the glass panel away from all of the magnets.
Place the glass on something soft like a soft heavy terry towel.
To clean the glass, use a non-ammonia type glass cleaner with a non-abrasive cloth.
A fairly decent size micro fiber cloth will work fine.
Throughly clean both sides of the glass, and replace the glass by putting the suction cups back , line up the bottom of the glass and attach the bottom of the glass, first.
Then slowly move the glass panel inwards holding the suction cups and get the glass close to the top and allow it to "snap" in place.
Restart the iMac and see if the blurriest went away.
If it didn't, then you may have to bring in your iMac to an Apple store or authorized Apple service center for servicing or a replacement LCD panel.
Depending on how much you paid for this iMac, get an estimate for repair.
It may cost more than you paid,for the iMac
You may have to consider purchasing another computer. -
I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch). All music is there and playable but will not recognize any devices. Help please
The ipod is not a backup/storage device.
You need to copy everything from your old computer to your new one.
The Apple store will do this for you, you can call apple support and they will help you, you can use google. -
i have downloaded whats app/brave temple run but using netsafe card. well now it shows 1.98$ is pending , though m trying with new netsafe card to pay it is showing error saying Pls select valid method for payment. i used same method as i did earlier
I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps -
The problem is this: the last time i ran the windows, but he hangs and died (can not run further the logo). now i can not load not windows, not maс! how to be, what to do???
can any body help me, plz!!
-
MY ipad3 running iOS 8.1 does not upgrade to 8.3. I have downloaded 8.3 but when I press install now and choose agree, nothing happens for hours. Any help?.
You are in the wrong discussion forum, but ok:
-- You say it is running 8.1 now, but your profile says 6.1.3, plse update your profile.
-- Did you download in Mac iTunes? or directly in the iPhone?
if in Mac iTunes: check the following Finder location: Startupdisk->Homefolder (yourname)->Library->iTunes->iPadSoftwareUpdates : the downloaded file should be there and be complete the extension should be .ipsw, if it is not there or not complete you should download again.
if in the iPhone: notice that the install phase and verifying phase and restarting phase need (good) internet connection. -
13" Mid 2012 MBP. Internal hdd not seen (again...) but runs fine from USB.
I bought my MBP in December, 2012. It ran wonderfully for the first three months. With no real warning whatsoever, I got the ? Folder at startup. I did my research and tried the troubleshooting I found here and on other sites.
What it boiled down to was that I could run the hdd externally via USB just fine, but it was not detected via the internal SATA connection. I tried swapping the hdd as well, but I didn't have any luck. So, I ran my brand new MBP via USB for about two months until I got back to the U.S. (working in Afghanistan) and took it to the local Apple Store.
They checked it out, swapped the hdd, and told me it was fixed. It seemed like it for about three or four months, but I was still wary. Sure enough, the hdd failed again. This time I couldn't get it to work from the USB though, so I beleived the hdd actually failed this time. I swapped the hdd, hoping that it was that simple (back in Afghanistan, so the store wasn't an option). It ran fine for about two months this time.
Now it is not detected internally again, but runs just fine via USB. I did try a different hdd that I had on hand, and that wasn't detected either. As you can imagine, I am not excited about running a year old MBP via USB. Unfortunately my initial year of coverage ran out last month.
Does anyone have some suggestions on how I should go forward with this? I've heard great things about Apple support, but I won't be back to the U.S. for at least a month. Should I bother talking to the local Apple Store when I get back? Deal directly with a different support avenue? Am I out of luck and stuck financing my own repairs? What is the best course of action here?
13" Mid-2012 MBP. 2.5 GHz i5. OSX 10.9.1Assuming there is nothing wrong with the HDD, then there may be a faulty ribbon cable connecting the drive to the motherboard. Try replacing it.
I would also check that your RAM modules are well-seated with clean edge pins.
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM -
i had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives. can i put the drives in external cases and plug them all in, will the imac see them as a raid slice then help please
Before you have another accident:
Buy a UPS of good quality and sufficient to your needs.
I would have to assume that the drives were connected to a PCI PATA card, hopefully. Otherwise, well RAID and having drives on the same bus (master and slave).
And no backup, none at all...
Get your hands on a G4.
Data Rescue 3 from Prosoft maybe.
If they were SATA and running on PCI SATA controller, very popular and common really in G4s, more options would be open. -
i got a message in gmail "this version of Safari is no longer supported. Pls upgrade to a supported browser." When I click on 'supported browser' it takes me to Apple's Safari site but there is no 'upgrade now' button. What am I missing?
Google seem to have decided in the last week or so that Safari 5.x, which is the newest Safari version available for Mac OS X 10.5 (Leopard) and 10.6 (Snow Leopard) is "not supported" any more, even though there are many reasons for staying with these OS X versions.
Try this (at your own risk, but it works for me), as it seems to remove the message by tricking Gmail into thinking your Safari version is newer:
-- Quit Safari
-- Locate the following file (location depends on your OS X version):
OS X 10.6 Snow Leopard:
/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/Resources/Info.pl ist
OS X 10.5 Leopard and older:
/System/Library/Frameworks/WebKit.framework/Versions/A/Resources/Info.plist
-- Drag the file to your Mac's desktop to make a copy. Also make a safe copy somewhere else eg your Documents folder, as if you lose or mess up the file Safari will not launch at all. Having a backup browser is also recommended.
-- Double-click it to open it in TextEdit
-- Locate the CFBundleVersion value (the last line in the file that has numbers in it) and increment the second digit of it to the required version of Safari e.g. Safari 6 now seems to be the minimum version that Google support so change the second number from 5 to 6 (don't change anything else, only the change the second number). The value is different depending on your OS X version but as an example, for Snow Leopard 6534.59.10 becomes 6634.59.10
-- Drag the file back from the desktop to its original location, choose the option to replace the old version, and enter your password when prompted.
-- Run a permissions repair in Disk Utility to set the permissions in the file back to what they should be (not required, but good practice).
-- Launch Safari and test Gmail. -
I am trying to erase all contents on my iphone 4, its been running for 6 hours now, is this normal?
I am trying to erase all contents on my phone, I am trying to get it back to factory settings, I don't have any jailbreaks or anything like that on my phone, The circle thing has been running for six hours now, is this normal? Before I did that, I tried to do it through itunes, and it would not restore it through there either? Im at a loss?? That took only like 5 min before it says sorry it could not be restored. This is taking forever....
Hello Stephiworld,
Thank you for using Apple Support Communities!
It sounds like you are trying to restore the phone to its factory defaults but the process is stalled or the phone is totally unresponsive.
If the phone will respond to the Sleep/Wake button, I would turn it off the normal way, then turn it back on.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
When it turns back on try the Erase All Content and Settings option again.
If the iPhone is completely unresponsive and will not turn off normally, I would reset the device with this process from the above article:
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
Cheers,
Sterling -
HT204408 Purchased FaceTime ver 1.0.4 for iMac running Snow Leopard. Now can't activate.
Purchased FaceTime ver 1.0.4 for iMac running Snow Leopard. Now can't activate.
Get the message "Could not sign in. Please check your network connection and try again"
On Apple Support page titled: FaceTime, Game Center, Messages: Toubleshooting sign in issues
all items in Resolution list are OK, e.g., have an active Internet connection, have a valid Apple ID and verified, etc.Thank you for the reply.
As my father-in-law's MacBook (10.6.8) with FaceTime 1.0.4 is not at hand now, I can not check it for myself right away.
But my understanding is :
(1) FaceTime 1.0.5 update is free for download for the OSX 10.6 users who have already purchased and installed FaceTime 1.0.4 or earlier.
(2) The OSX 10.6 users who want to start using FaceTime from now, need to purchase the 1.0.5 for $0.99 (just as other OSX 10.6 users did before).
The latter (2) is because OSX 10.6 does not include FaceTime which was not ready at the time of its release. Due to some accounting regulation, Apple chose to sell the FaceTime to OSX 10.6 users at the mimimum price rather than to add the function afterward for free.
That means every OSX 10.6 user who wants to use FaceTime has to pay $0.99 at some point of time, but I believe Apple is not so greedy to charge the same software twice to fix its bug.
I guess the screen shot you posted might be taken either by a non-OSX 10.6 Mac, or by OSX 10.6 Mac without FaceTime installed. If you see the same page by a OSX 10.6 Mac with FaceTime alreay installed, it will look diffrently.
Anyway, I may be wrong, but I will check it with my father-in-laws' MacBook hopefully this afternoon. -
I installed the Dreamweaver trail 5 days , but my computer restored and now its gone and when i try to download it again it says that i have got it.. how do i re install the trail?
Run the cleaner tool and try again.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
Small issue but very annoying....
When using the dashbaord to access the calculator in Snow Leopard it would overlay it over the project i was working on. In Lion when accessing the calculator it takes me to a new screen. This is very annoying as i like to see what im working on while using the calculator at the same time. Now i have to swtich back and forth between screens. I know in the grand scheme of things this is a small problem but its very annoying. Is there a way i can make the calcualtor work as it did in Snow Leopard?
System Preferences...>Mission Control>Uncheck Dashboard as a space.
-
Application running too slow on sun T5440 but run normal on sun M3000
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant. -
After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
THis also happened with my old iphone 4s
I need help!Hi loist,
Thanks for visiting Apple Support Communities.
If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy
Maybe you are looking for
-
How i can display multiple row from one row
Hi , i have table called temp_probabaility and contain 2 colomns (id1 , path )the values as below , ID1 Path 3 ;2,4,6 4 ;1;2;3;5 5 ;1;2;3;4;5 i need to convert the values to be like below , id1 path 3 2 3 4 3 6 4 1 4 2 4 3 4 5 please any help ? Edite
-
Search no longer works in Mail
Whenever I try to search all my mailboxes, the Activity window indicates that Mail is getting hung up trying to open a mailbox called "MessageMallSearchMailbox". Anybody have any clue what this is? Nothing is coming up on Google, and I most definitel
-
Appleworks Opens Documents as Spreadsheets
I did a quick search of the forum and didn't find anything on this... I hope somebody has a quick solution, because I'm going to bust a big deadline if I can't figure it out. Appleworks is suddenly opening document files as spreadsheets. Background:
-
Hi, I have set the property Display in separate window. Can I control the number of window been opened up? As in, I want even if I click several times, it should open only one window but not number of times I clicked. Thanks, Atul
-
Dear All, My Client is having a requirement which is as follows: He is having a factory and he wants to declare Saturaday as half day and Sunday as Holiday. We all know that we can declare a full day Holiday in Factory Calender. But, how can we decla