Small sizeselection always prints color on 2710 All-in-one

Bout invitations from www.willtonprint.com, and the size of the invitation is 5.5 by 8.5.
Using the website to print, it comes out perfect using regular paper.
When I stick the invitation size paper in, the printer complains about unexpected size and prints in purple.
OK, so I told the print driver only to print in Black, and it still prints in purple.
I tried a custom size, and it reduces things in size proportionally AND it prints in color.
I am toying with the idea of taping the invitation to a regular piece of paper, unless anyone has a good idea.

If you have the paper type set to "Automatic" the invitation paper may be being detected as photo paper, which will not use the black cartridge. If the color cartrdige is low on yellow ink trying to print black text on photo paper will result in purple prints.
Try changing the paper type to "plain paper" or replace your color cartridge.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

How can I print from my Iphone 5 to my wireless HP 2710 all in one printer?

Hello,
I have an HP 2710 all in one printer and set it up on wireless. I haven't been able to find out how to print emails from my Iphone 5 to the HP. It's an old printer from 2004 but it works well as from the first day I purchased it. I looked at various apps from the app store but I have no clue which app I need. I appreciate any help!
Thanks!

Hello Vman,
Thanks for the post. Check out the below link, this will direct you to the HP ePrint mobile app. where you can download the solution. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=420428#N121
I work for HP but my posts and replies are my own....Thank you!

Entering a "$" in the SSID password when setting up an HP Photosmart 2710 all-in-one printer

Hello,
I have a Photosmart 2710 all-in-one printer, and I am trying to set it up wirelessly. However, my SSID as a "$" in the password, and I can't find any way to enter this symbol in the wireless setup on the printer. Also, when I try to run the HP Printer setup wizard I downloaded from the HP support site, it says this printer is not supported by the wizard?
Can anyone help?
Thanks,
jmmain1

You must change your wireless password in the router to not conntain any special characters. Once done, go back and input the password in the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Will the 2710 all-in-one printer be supported by windows 7? works on xp, will it on windows7?

Is the 2710 all-in-one printer supported/compatible to Windows 7? It was on a XP, however hard drive is crashing and need to see if I may need to buy another all in one printer or able to keep my 2710.

HP recommends that you use genuine HP cartridges. HP cannot guarantee the quality or reliability of non-HP cartridges, or refilled HP cartridges.
Well that being said about the cartridge, I would try a power reset like this:
With the power on, open the ink access door. Remove the power from the printer. Remove the ink cartridge and close the cover. Wait at least 30 seconds then reconnect the power cord to the printer. Turn the printer on. Open the access door and insert the cartridge. That may clear up the issue, if not well.......
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

The Photosmart 5510 is AirPrint capable. You can find that information linked below. There may be something in the network that is preventing communication. To use AirPrint your router needs to support Bonjour services. Run the download below. It will let you test Bonjour services from your Windows PC. If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour. Let me know what the app finds. If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
Bonjour Print Services for Windows v2.0.2
HP Web Connected Printers and Supported Cloud Services
I am a printer tech for HP.

Where is the print button on my all in one

where is the print button on my all in one pc i cant see it at the top of the page

Hi,
Hundreds of AIO models are out there, what is the model of your printer ? Where do you print from: from its card reader of from a computer ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT4356 I have an air-print enabled printer: HP Premium e-all-in-one C310. Can't print from iPad iOS6. They're on the same network, but have different IP addresses. On the iPad it's 192.16.1.126 and on my printer it's 192.168.1.133. Can I match them? H

I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?

fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert

Why wont' my Iphone 4 print to hp 4500 all in one?

I downloaded the Hp home&biz app to print to HP 4500 All in one printer.
I can print from Ipad, Itouch and MacBook Pro but not from Iphone 4.?????
I have tried everything.
Thanks.

Hello dobis11011,
You have verified a lot of common factors that can interfere with the printing method that you want to use.
I would also try some additional steps, you can try to print after each step to isolate the causing factor:
Verify Bluetooth is off (preferred setting).
Power your iPhone off and then on.
Press the home button twice and end the HP ePrint Home & Biz app from the multitasking section.
Delete the app and re-download it from the Apple App Store, as it is a free app.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to print to HP PSC1110 All-In-One Printer connected to WinXP PC?

Hello everybody,
I would like to us an HP PSC1110 "all-in-one" printer connected to a Windows PC in another room.
The easy part: The printer shows up in the browsing window, under the correct Windows domain, when I try to add an "other Printer" device.
The difficult part: When I try to select the printer model from the list of HP printer models provided, it does not show up, although HP PSC 1110 is included in the list of supported printers.
I also tried the ESP HP-deskjet drivers, both old and new version. But those result in printer errors on the Windows PC.
BTW: Printing over the net works well from other Windows PCs!
Can somebody out there who had a similar problem before give me a hint how to set up printing to an HP "all-in-one" over the Windows-Network?
Thank you,
Detlef

Thank you for the detailed information. Maybe I should have added a few screenshots too.
The suggested procedure probably works for a HP Photosmart Printer. However, the PSC1110 is a "Printer, Scanner, Copier" all-in-one device. Unfortunately, this one does not show up in the menus, although it is supposed to be supported. I assume that only an USB backend is available, but no SMB backend.
Is this correct? Is there a workaround?
Thank you for your feedback
DC

How can i add a wireless printer HP officejet 6310 all in one? is it possible

How can i add a wireless printer HP officejet 6310 all in one? is it possible..?

Hi @millep
To answer your question, no the Officejet 2620 is not a wireless printer;
- Source: Printer specifications
As for the USB cable, personally, I believe the intention is to bring down the cost of the printer by selling the USB cable separately. Many people already have printer USB cables kicking around the house, so instead of paying more for the printer and having an extra cable I believe the theory is reduce the cost and sell the USB separately for those who need to purchase one.
I hope this answers your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Can i set the ipad to print to an Hp all in one that is connected to Airport express

Can i set the Ipad to print to an HP All-in-one Printer that is connected to airport express?

Hey Eugene!
Here is the website about AirPrint, if you scroll down it will say in details if your model is compatible with AirPrint.
http://www.apple.com/ipad/features/airprint.html

My printer, hp photosmart c4200 all-in-one is stuck in scan mode

My HP printer--HP Photosmart C4200 All-in-One is stuck in scan mode. I have tried holding start button 60 sec, unplug from power supply, hold while I plug back in with no luck.

Hi @Bungybill,
Welcome to the HP Forums!
I understand that you cannot copy or scan with your HP Photosmart 3110 on Mac. I am happy to help!
For further assistance, I will need to know:
The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you make a copy, and lift the lid, do you see a light come on and the scanner bar move?
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Iphoto 08 Will not print 4x6 borderless prints to HP 3210xi All In One

Hi Folks,
I've just installed Iphoto 08 and upgraded to the latest version 7.1.2. I've also just installed the latest HP 9.7 Mac drivers released to support 10.5.2 on 2/4/08. However I can not get Iphoto 08 to print 4x6 borderless prints to my HP 3210xi All In One Photo Smart printer.
I'd appreciate any feedback/suggestions from anyone who is able to get Iphoto 08 to print properly.
Jim

Jim:
I don't have an solution but this printing problem with HD all in ones has been discussed many times. Do a search in this forum for HP All In One or HP 3210xi or other similar search terms and you'll find the various threads where it is discussed. I don't remember if a solution was found in any of them as I don't have an HP and didn't pay much attention.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Small sizeselection always prints color on 2710 All-in-one

Similar Messages

Maybe you are looking for