Small thing stands out right side of the arm rest
Very difficult to describe. I noticed something sharp coming through the plastic at the right side, around 1 cm below the down courser key. Not much, but I clearly notice and can see it. Looks like a small pin coming though the plactic. 1/10 of a mm.
I'm very confident that this wasn't there when I bought the black MacBook in February. Has anyone had the same problem and can I expect more.
Take a picture and show it to us.
Similar Messages
-
How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on
I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected] -
Bookmarks - Hate the firefox version. Double click on star in the address window to bookmark the site and the pop-up window is too small and user unfriendly. And when in the bookmark window and have bookmarks on the right side of the screen there is no way to know which folder on the left you are actually in. Is there any way to upgrade the bookmarks feature. So frustrating I might actually go back to IE because of this. Thanks.
I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default. -
I am unable to see the extreme right side of the last tab
It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
This can also be a problem with the localstore.rdf file in the Firefox Profile Folder that stores the windows sizes and their positions.
See:
* http://kb.mozillazine.org/Corrupt_localstore.rdf -
There's no thumbnails to drag around except one on the left side of the page (the one that's open). The right side of the page lists every tab I have created.
Perhaps your problem is that '''you must save your browsing history''' in order to use app-tabs that would apply to groups as well but I did not test.
* http://img232.imageshack.us/img232/4928/clearcachew.png
I would suggest that if you do not save that stuff in bookmarks, that you will probably have a serious problem soon and lose your tabs, so if you count on them you could lose them. They should stand up to repeated restarts but I would not count of them as app-tabs myself, for one thing it is new, the other is I have to frequently wipe them out and restart, because I actively open new content into them and go back to the beginning of the tab history, and sometimes I can't, and sometimes I lose them by accidentally closing them -- and I must be able to close them in all manners that I close other tabs or I wouldn't be using them.
There are people who keep 200 tabs open through restarting, that is not for me, I try to clear out the tabs frequently.
That is what app-tabs are for as opposed to home pages, but I did have a problem when I tested with 120 since as app-tabs only about 65 can be seen at once even though I did reduce the width of app-tabs to about 2/3 the size that they were.. Problem I had when I restarted was that the window enlarged a bit beyond the screen, and my tab counter disappeared until I reduced the count to about 65. I do not allow tabs to scroll so you probably wouldn't have that problem.
I forgot to test home page with 60 tabs. I do have something set to 75 though have to check that. I tested with 60 pages as home page. Brought firefox down and backup with the 1 app-tab and 60 home pages the app-tab is the same size as the 60 normal tabs from home page.
Never used group-tabs by choice, since they messed me up I stay clear of them, I don't like them or anything large panoramic type of large thumbnails. -
HP LaserJet 2820 All-in-One fails to print on right side of the page
I have HP LaserJet 2820 All-in-One for 1.5 years now and before the first set of cartridges run out of ink, the printed page comes out blur or no printing on the right side of the page. No smear on the right page. It doesn't matter if I used color or black printout, the right page still come out blur or prints.
I replaced all new HP OEM cartridges, I then replaced HP OEM fuser RG5-7602 located on the bottom back of the printer, reset the page setting menu and as a result the problem still exists. In one year and half, the total cost for the printer and replacement of cartridges and fuser came out to be almost $1407 and now I can't use the printer. I don't want to junk the printer or spent hundred of dollars more to resolve this problem. If any one encountered this issue before, I appreciate if you can guide me to resolve this problem. Thank you so muchhi everyone
i have same problem on hp clj2820, half page printed, half page
1) i cleaned laser mirrors and verify conectors and wires of laser scanner unit ... the problem persist
2) i inspected carousel assembly, a small plastic gear on the upper left side was wrong aligned, 1 tooth scrolled up or down, i fit this tooth in correct position ... the problem persist
what is happening?, regards -
I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?
Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go. -
1px line created on the right side of the browser
Hi All,
I want to have a banner image, which fades into blackness so i have made the image smaller to fade into a black solid background. I have simply placed this behind the background image.
When adding either a rectangle with a fill image or a solid black image to my banner, it is somehow creating a 1 pixel thin white line on the right of the browser. It's as if there is an element which is larger than my width (1400px including the 100px for left and 100px for right margins). It is also creating a horizontal scroll bar.
Once i delete this rectangular fill/solid colour fill, i no longer have a horizontal scroll bar or a 1px thin line on the right.
I have double checked every single element of the page that it does not exceed the canvas size and it touches the edges to create the red lines that it is 100% full browser width. I have checked the master etc.. everything seems to be fine and the correct 1400px width.
Can anyone assist with what could potentially be causing this? I have attached some screenshots if you need any.
PLEASE NOTE! This is only an issue with GOOGLE CHROME for desktop and on any browser for tablets (haven't tested on mobile yet as i have not optimised my site for mobile).
I've tried this is Safari and it has no horizontal scroll bar or an issue with the 1px thin line on the right side of the browser.
This is killing me because i can't find out what it is!Hi All,
Anyone have any ideas?! -
Printout are printed to the right side of the paper
Printout are printed to the right side of the paper
all other settings are ok but the text is printed too much to the right sidehi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Black bar along the right side and the bottom of the screen- DV5-1007ca
I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!
I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.
-
MY IPHONE SCREEN HAS GONE SEPIA. The RIGHT SIDE OF THE SCREEN IS BLACK!
Hello, my iPhone screen has turned sepia. No one say 'click the home button 3 times' or 'turn white on black off' because I have tried them!
Basically on the right side of the screen there is a black part. About a quarter of the screen it fills.
It is sepia too. It is really hard to see things. Also, say if i am on the home screen, then i open settings; the home screen would be in the background!!
HELP!
Here is a pictureFor an out-of-warranty replacement phone:
149.00 USD
=
94.6872 GBP -
When I right click and go save image/page/ect as the file save popup screen appears and on the right side of the File Name bar there is an arrow. If you click the arrow it shows the last 20? items that have been saved and their save location. Is there anyway to not have the list of recent items there or at the very least a way to clear them? I'm running Firefox 17 on Windows 7.
Also when you save items as you were typing in the name you want to save them as it used to show filenames with the same name as you type that are saved in that directory so instead of typing the whole filename or copy/pasting you could start typing a filename and then hit the up or down arrow, backspace and just change the end of the filename without having to retype the entire filename.
Hopefully you understand what I mean and can help me fix it, thanks.It's in the proper directory. I can scroll down the window on the right and see the files but if I start typing the file name of one of them the autocomplete drop down thing that shows matching file names does not appear. In the back of my mind I'm starting to think a setting got changed and then the list of matching file names stopped appearing but I can't recall what setting may have been changed, if it was a firefox or microsoft change or for certain if anything got changed at all. Yeah I know I'm not helping my own cause but what can you do.
-
When I first went to do a search using the search box on the right side of the toolbar I noticed it had a different icon. It was so so small I did not recognize it as Ebay until I hit search and it was then I realized my search tool had somehow been changed. The only use my wife had made of the computer since the prior evening was to view an email from the president of a local charity sending an updated roster of officers. I did look at the user profile file and saw that it showed the profile changed as of 7:46 am which was when my wife looked at the email. I tried deleting the file but firefox would not run without it so I restored the file. Our internet security program is Avast.
Here's a simple explanation of how to fix the problem:
https://support.mozilla.com/en-US/kb/Search%20bar
Worked for me today!! (Even when opening a new browser window.)
Cheers!
Shaunalei -
I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen. I believe I must have hit a button that moved the picture to the far right.
On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next. -
I had on my desk top PC (a vista OS) a version of FireFox that the book marks where listed in the book tool bar tab and the "book tool" was able to show all my favs and there was a scroll bar on the right side of the top right side. I would like very much to turn it on in the Laptop I just bought and am having a fit trying to figure out all the differences,.I very much like this function; however, I am now using win 7 which in and of itself is difficult to figure out troubles when they occur such as if the MSN Bing program opens a video window while I am playing, the media center will lock up, or if I am listening to BBradio.org and click on lestening to one of the pastors the laptop will show static on the screen and all you hear is static like you just went to the twilight zone.
== This happened ==
Not sure how often
== unpredictableTo attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html
Maybe you are looking for
-
HT1688 how to unlock my iphone 5s .............................
how to unlock my iphone 5s online free.........................
-
Connect two iMacs in order to exchange data
Hello everyone, I am about to buy a new iMac and would like to connect my old iMac via wire to exchange data. I do not want to use the migration assistant as I want to clean up my data. So is there a way to connect these two computers in a way that t
-
Sorting values by escaping the html tags
Hi Friends, My problem is described below... I am facing an issue where I need to sort (main title/ alternate title) by escaping the html tags. eg 'Amex' should always be before 'Singer' Amex in DB is like Amex. Syngo in DB is like <i>Singer</i> so
-
Does current Oracle Maven Repo supports 11.1.1.7 ADF JDeveloper ?
Hi All Does current Oracle Maven Repo (OMP) supports 11.1.1.7 ADF JDeveloper ? What's the minimum JDeveloper version that OMP currently support ? Thanks
-
Regarding real time java packages
Hi, I am relatively new to java. can anybody tell me about real time java, and where can i find the implementation of javax.realtime package?