Small toolbar icons not diplaying correctly in FF8

I recently upgraded from Firefox 7 to version 8. Since the upgrade, if I'm using the Default theme and set the toolbar to use small icons, instead of the usual dark-shaded icons I get unshaded white ones.
The icons are plain white with single-pixel-width black borders and internal details. They are very bland, and, frankly, ugly.
This only happens with the Default (Strata) theme, and ONLY if the toolbar is using SMALL icons. If I go into the customize toolbar dialog and uncheck "use small icons", I get the normal Strata icons again. And if I switch to a different theme altogether, I get that theme's icons, naturally.
Are these small icons a "new look" for the Default theme? If so, I'd rather have the old ones back.
EDIT: I just realized, the "white icons" only appear if the toolbar's "Tabs on top" property is UNCHECKED. If I re-check it to move the toolbar below the tabs, I get the shaded icons back. Uncheck it again, and the white icons return.
I've tried restarting Firefox in Safe Mode, by the way, and get this same behavior. I'm beginning to think this is by design...

There was a change in Firefox 8. See this semi related discussion about small Navigation Bar buttons, the OP's problem is different than your's, but the change is explained here.
http://forums.mozillazine.org/viewtopic.php?f=38&t=2357753

Similar Messages

Website Icons not displaying Correctly on FF8.0

Dear Support,
After upgrading to the latest FF8.0, I noticed that some of the bookmarked websites in my bookmark toolbar don't display their icons correctly.
for e.g.: I have Cisco.com at bookmark toolbar. Instead of displaying Cisco's logo next to the website name, I'm getting an empty dashed square.
Kindly advise
Regards
Michel

The MOST common cause of sites not displaying properly in any browser is the invalid code on the page -
[Invalid] Markup Validation of http://selfhelplegalonline.com/ - W3C Markup Validator
See if you can fix those validation errors or post back here for help.

Icons Not displaying correctly in Bridge 6

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Also some image icon as above shows just the first layer, not added layers. I open the image in cs6 and it is correct. The correct image is saved and working; but the icon does not show the correct image.
Of 30 images I have worked on over the weekend there are only two in the folder that do not show correctly. The files are not bigger/smaller than the correct ones and all of them are psd. Any ideas? Thanks, Bob

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Assuming with Image icons you mean the thumbnails in the content panel and that you are using Bridge CS 6 (which has Bridge version 5)?
The short route to check is selecting one one the problem thumbnails and with right mouse click from the menu choose 'purge cache for selection'.
If this works then go to the menu tools / cache / purge cache for folder and you should be OK.
If not you have to provide more details about computer specs, OS version and exact Bridge version

Menu toolbar icons not displayed in colour when deployed on the Web

Hello!
We are developing an application using Forms6i on Windows NT.
Our problem is that menu toolbar icons are not displayed in colour when the application is deployed on the Web using lookAndFeel = generic. This is the case both when using Microsoft IE5 and Netscape 4.5. When lookAndFeel = oracle, however, the icons are displayed in colour.
The icons are stored as *.gif files in the same directory as the application *.html file. It does not help to create a virtual path /web_icons/ in the www listener and edit the parameter default.icons.iconpath in the file Registry.dat.
When running the application as client/server, the menu toolbar icons are displayed in colour as expected.
Any ideas on how to solve this problem?
Regards,
Kjell Pedersen
Nera SatCom AS
Norway
null

Hi,
I got the same problem and I didn't figure out, how to solve this problem.
But did you try to printout the form anyway? I guess you will see the icons on the printout, won't you?
Regards
Dirk

Mc-icons not sized correctly in Internet Explorer

The file icons used by Sun One Web Server 6.1 (/mc-icons) to indicate file types do not display correctly when a directory does not have an index or default file, and the web server automatically creates an index that includes these icons and shows the directory contents. The icons representing the files appear correctly sized in Netscape Navigator 4.7 browser, but appear to shrink beyond visible resolution in Internet Explorere 6.0 browser. Fancy indexing (common) is being used. Platform is Windows 2000 Server, also running SSL3 and ColdFusion 7.0. How can we get the icons to display at a visible size in Internet Explorer? The result appears to the user as if the icon graphics are missing, but they are indeed called correctly by the page and the path to them is set correctly. I have verified that the graphics are OK on the server and are sized correctly when viewed in an image editor.

Are you sure the problem is the size of the icons? Beginning with version 6.0.2900.2190, Microsoft Internet Explorer stopped displaying the Web Server /mc-icons GIFs. This regression was apparently a side effect of Microsoft's attempts to fix IE's handling of malicious image files.
Apart from not using the buggy versions of IE, I'm not aware of a simple fix. I suspect a future Web Server 6.1 service pack will include a work around for the IE bug, but probably not until 6.1SP7.
I've added tweaked icons to my blog at http://blogs.sun.com/elving?entry=directory_listing_icons_and_ie that IE will display properly. You may wish to copy these into your ns-icons directory.

Sometimes Tray Icon not loaded correctly

I am trying to make my (html/ajax) website available as a desktop application, (with little enhancements like notifications in the background etc.) without writing any extra code. Everything works fine except the tray icon. Sometimes the tray icon is not loading correctly.
Following is the structure of my sample air application.
1. An html page(page1.html) i am using as my inital window.
It creates an invisible html window and loads a new page (page2.html) as below.
        var options = new air.NativeWindowInitOptions();
        options.systemChrome = "standard";
        var windowBounds = new air.Rectangle(200,250,300,400);
        newHTMLLoader = air.HTMLLoader.createRootWindow(false, options, false, windowBounds);
        newHTMLLoader.window.mainAppWindow = window;
        newHTMLLoader.load(new air.URLRequest("page2.html"));
and later redirecting to the website.
2. I am using this invisible html window to control the application behavior (like sending ajax requests in the background, monitoring network, checking for updates etc.)
page2.html contains code to load the tray icon for the application.
Here is javascript the code in page2.html
function BgWindow(){
        this.init = function(){
            this.loadTrayIcon();
        var iconLoadComplete = function(event){
            air.NativeApplication.nativeApplication.icon.bitmaps = [event.target.content.bitmapData];
        this.loadTrayIcon = function() {
            air.NativeApplication.nativeApplication.autoExit = true;
            var iconLoad = new air.Loader();
            if (air.NativeApplication.supportsSystemTrayIcon) {
                iconLoad.contentLoaderInfo.addEventListener(air.Event.COMPLETE,iconLoadComplete);
                iconLoad.load(new air.URLRequest("lmt16.png"));
    window.onload = function(){
        bgWindow = new BgWindow();
        bgWindow.init();
But the problem here is, sometimes the icon is loaded correctly but sometimes its not loaded.
What am I missing here ?
Any help is appreciated.
I am attaching the complete application if somebody needs to analyze it.

Sorry. Your attachment didn't come through. It triggered an error message about a "malformed container violation." Please try to rezip it and try it again.

EPub FXL - fonts not diplayed correctly

Any idea why fonts are not displayed correctly in an ePub FXL if the paragraph style is set to world-ready composer? But they are embedded in the Fonts folder...

Hi Anne-Marie,
Thank you for your answer.
Does it mean that Adobe world ready composer is not build for western script ?
Adobe Help Site mentions the following:
"Adobe World-Ready composers enable you to create content in middle-eastern languages.
You can type in, and mix between, Arabic, Hebrew, English, French, German, Russian, and other Latin languages."
InDesign Help | Arabic and Hebrew features | CC, CS6

Indesign CS3 .indd icons not displaying correctly in Windows 7 64 bit.

GDay InDesign Gurus.
Ive just recently moved over to Windows 7 64 bit and have noticed that my InDesign .indd file icons are being displayed as a blank file type instead of the IND icon type. The .indd files open up correctly in InDesign upon double clicking so the issue is more of a convenience one. I have checked that the file association has been set to InDesign which is all ok as the files open up fine just there is no IND icon displayed in the file; my Photoshop and Illustrator files are all fine and display correctly but it would be nice if I could easily see my .indd files.
Ive searched the web for a solution but have not been able to fine one associated to Windows 7 64 bit.
Any help you guys can provide would be highly appreciated.
Thanks guys.
Regards Stuart K

http://forums.adobe.com/message/1319918#1319918
Bob

Icons not displaying correctly getting text instead.

I have tried all options that I have found on your forum with no luck. I went as far as resting my Firefox to default with no success.
Using MAC 10.8.5
My setting are set up correct - Allow pages to choose their own fonts, instead of my selections above is checked.
I also rest this as well
gfx.downloadable_fonts.enabled
So far no luck I am still getting text instead of the icons.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB

Brush icon not displaying correctly

Hi folks,
I just installed CS4 on a lovely new Dell notebook with WUXGA display (1920x1200) and am having a problem that I have never seen before. When the brush tip is small (up to 35 px at 100%) I see the entire circle defining it, but as I move into larger and larger tip sizes the circle starts to disappear from the bottom right, becoming just a smaller and smaller circular fragment until it disappears entirely at around 300 px. If I select the center crosshair, this also disappears around 200px (when only a small circular crescent is left), and then reappears at around 400px (minus any trace of the circle).
It is obviously some sort of display issue: if I change the image size the behavior is the same when the circle is the same size onscreen, so it is the display size and not the absolute pixel size which determines it. This happens whether I choose normal or full-size tip.
Has anyone experienced this? It is not only annoying, it is positively serious, since at certain sizes I cannot even tell where or how large the brush is.
Clear type on or off makes no difference. I have not noticed any odd display behavior with any other program.
Any suggestions most welcome.
Toby

This was a very common fault in the early days of CS4.
You need to update to Version 11.0.1 and get the latest video drivers.
You might have to experiment with OpenGL settings in the preferences too.

In Firefox, the Skins toolbar is not displaying correctly. Is there any way to add padding to fix it

The Skins toolbar looks great in Internet Explorer and Chrome, but Firefox does not have any padding around the toolbar buttons (see picture). Is there a way to add padding?
Thanks for your help,
Colleen

Hello again
Your response makes me wonder if you misunderstood me. Especially the bit about "transparent" buttons. Because that's precisely what I was suggesting. Add the "padding" you want, by adding some transparent area at the bottom of the buttons. That way the appearance should be that the buttons have some blank space below where the image ends and the divider.
At least that's what I interpreted you to be wanting.
Cheers... Rick

Itunes icons not shown correctly after install of itunes 7

hey everyone, on my windows pc , i installed itunes 7 and the icones dont appear as the normal itunes disc with music note, what may be wrong and how can i fix this. ? thanks in advance.

Also tried launching in iTunes safe mode. Window came up stating opening in safe mode but, iTunes did not open.

FileMaker Pro icons not displaying correctly

After updating to Yosemite, all of my FileMaker Pro document icons are displayed as generic icons (juts the outline of a piece of paper). This occurs both in Finder and on the Dock.
Other document icons seem okay. If I do a Get Info on a document, the icon seems okay in the Get Info window.
Does anyone know how to correct this behavior?
Thanks!

Thanks, coreworksnet.
I was also seeing this problem with FM 13. I was able to get around it, but it was a headache. I had to go into each individual DB file and do a Get Info. That dialog shows the icon for the document (which, strangely enough, showed the correct icon). I then copied the icon over from the FM app (which visually did nothing). But once I closed the Get Info dialog, the icon for the DB file was correct.
Repeat a few dozen times for all of my DB files, and it seems okay now.

Toolbar Anchor not formating correctly

I have had Homesite set for HTML to NOT have new lines after the start or text portions of the Anchor tag. In other words, after I created the entry for my document it would all be on one line. Now I am trying to do XHTML and the Anchor that is selected from the Toolbar will create a 3 line result. IF I use the Right Click insert it works as desired!! Why are the two different and what can I do to make them the same. I have tried the Options->Settings->Codesweep route and still no success in XHTML. Like I said earlier, it works ok for HTML. Does anyone know of some magical setting???
Thanks

I had this issue with the sidebar. After manually deleting the folder from windows explorer and purging the CPD file, it went away.
Greet,
Willam

SU53 not diplaying correctly: Question Marks "?????" in SU53 description

Transactions SU53 and SU56 are displaying "???????????" instead of descriptions in some fields.
SAP Side Effect Note 989888 has been applied. (albeit with a problem with SNOTE/saprouter and the changes had to be made manually).
The problem still persists.
The system is at release level: 620, level 0061, support component SAPKB62061
If anyone has experienced this and can help it would be very much appreciated
Thanks!

Hi Carly,
we also occasionally experience this problem in all sorts of transactions. It's not specific to SU53. It's related to the screen incorrectly generated.
To correct the problem you need to find out what the effected screen/menu is and then re-generate it with usual developer tools.
I haven't done it for quite a while so can't give you any more specifics at the moment. If you need them I'll try to dug them out but maybe this is already helpful.
Kind regards
Petra Merkel

Small toolbar icons not diplaying correctly in FF8

Similar Messages

Maybe you are looking for