Smaller list, contact view, in Lync?

Browsing contacts has becomed harder after upgrading from Communicator to Lync. Is there a way to view the list more similar to the way it was in Communicator?

Hello Hal07,
In the bar directly above your contact list there is a drop down list on the right hand side.  Please click that drop down and choose "Name View" instead of "Picture View".  That should take care of the change for you.
Hope this helps!
-kp
Kevin Peters blog: www.ocsguy.com MVP Communications Server, MCITP: Enterprise Administration | MCTS:OCS | MCSE | MCSA | CCNA

Similar Messages

  • How do I use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?

    We are attempting to use SharePoint 2010 in combination with Exchange 2010 to implement shared calendars and contact lists throughout our organization.  We are able to connect the lists to Outlook 2010, but have been unsuccessful in viewing
    the calendars and contact lists from our mobile phones.  How do we use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?
    In trying to answer this question, we have come across a few different possibilities, all of them falling just short of a long term solution for us.  After doing research, we found that Active Sync will only show the default folders of the account.  To
    solve this, we downloaded an Add-In for Outlook (CodeTwo FolderSync) to synchronize folders and synchronized our SharePoint list with a new Contact list in the default folder.  The issue we came across with this method is that the Add-In we are using
    is not capable of automatic synchronization.  There is a button and it must be clicked after every update is made, which is not ideal for our solution.  We then went to the company (CodeTwo) and found server side software (Exchange Sync) that they
    offer which will automatically synchronize the folders.  After installing that on the Exchange Server, we now are running into the issue of not being able to locate the SharePoint lists on the Exchange Server.
    Does anyone happen to know how we can get to the SharePoint lists from the Exchange Server?  Has anyone else been able to use shared contacts lists and calendars from SharePoint on their mobile phones using Active Sync?  If so, are we in the right
    direction with what we have found so far?
    Thanks,
    Brad

    You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
    Use Microsoft SharePoint Workspace Mobile
    http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
    iPhone SharePoint Apps Shootout
    http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx 
    Comparing SharePoint iPhone Apps
    http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
    MCTS: Messaging | MCSE: S+M

  • Blank File Icons in Small List View

    Hi,
    I got an annoying problem with my Mac.
    In Finder, it's not going to show the right icons while I'm in the small list view.
    If I switch to the bigger list view or the symbol view, everything appears correct.
    I just reinstalled Yosemite but it's still be there.
    I attached some screenshots.
    I hope you can help me.

    Here the Screenshots:

  • Small List View

    I want to keep the Swatch Panel in "Small List View". How can I change that in the Windows version of Illustrator CS3. I see a few fixes in the mac forum. Is a similar file available for editing in windows?

    I don't have AI 13 (CS3), but there is an analogous file (AIWSPrefs) in AI 12 Win. Try looking for it in this folder:
    C:\Documents and Settings\{your logon user name}\Application Data\Adobe\Adobe Illustrator CS3 Settings\Workspaces
    The above assumes C: is your system bootup drive.
    You can always try a Windows search for 'AIWSPrefs.'
    I do not know whether the modifications suggested for the Macintosh versions will produce the desired results in the Windows version.
    Pull off a copy of the file to your desktop or other location before you start messing around with a text editor.

  • I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

    I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
    Regards
    Raghavendar

    Hi Raghavendar,
    Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
    1. In Outlook, click the File tab, click Options, and then click
    Add-Ins.
    2. Please take one of the following actions:
    If the add-in is in the Inactive Application Add-ins list, follow these steps:
    a. In the Manage drop-down list at the bottom of the dialog box, click
    COM Add-ins, and then click Go.
    b. Click to select the check box next to the add-in, and then click OK.
    The New Online Meeting button should now be available in
    Calendar View, and the Online Meeting button should be available when you create a new calendar item.
    If the add-in is in the Disabled Application add-ins list, follow these steps:
    a. In the Manage drop-down list at the bottom of the dialog box, click
    Disabled Items, and then click Go.
    b. Select the add-in, and then click Enable.
    c. Restart Outlook, and then verify that the add-in is displayed in the
    Add-ins dialog box.
    The New Online Meeting button should now be available in
    Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
    3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • How to join 3 or more lists and create one single composite list or view in SP2010?

    HI
    I have 3 lists which has common field called -BARCODE. I need to link all these 3 lists by this ID and display a composite list
    which contains few columns of each list for view and edit. Is this possible? If not edit , can just view? report?
    Master list, list1 , list2
    (Master list --Left Join list 1 and Left join list2)
    Master list will be entered first then other lists.
    Thanks,
    JRS

    Hi,
    According to your description, there are three lists has a common field “BARCODE”, you might want to gather data from the three lists and populate into another list.
    The available OOTB features would not be able to meet your requirement, I would suggest you achieve it in a way programmatically using SharePoint Object Model, CAML
    query and Event Receiver.
    With
    SharePoint Object Model, we will able to access data in list/library:
    SharePoint Object Model -
    SPListItem class
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.splistitem.aspx 
    Add, Update and Delete List Items Programmatically in SharePoint
    http://www.mindfiresolutions.com/Add-Update-and-Delete-List-Items-Programmatically-in-Sharepoint-372.php 
    More information about
    SharePoint Object Model:
    http://msdn.microsoft.com/en-us/library/ms473633.ASPX
    With
    CAML query, it can help us query the data with some specific conditions:
    http://sharepoint-works.blogspot.com/2012/05/caml-query-tutorial-for-sharepoint.html
    https://msdn.microsoft.com/en-us/library/office/ms467521(v=office.15).aspx
    The tool below would make it easier to compose query statement:
    http://www.camldesigner.com/?p=594#more-594
    Event Receiver, we can use it to monitor the events such as when item created, when item deleted etc.
    Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
    http://msdn.microsoft.com/en-us/library/ff398052.aspx
    More information on Event Receiver for your reference:
    http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
    http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
    Yes, to write the code, a Visual Studio installs on the machine which has SharePoint installed would be required, to get a quick start in SharePoint Development, I
    would suggest you take a look at the links below:
    http://blogs.msdn.com/b/erikaehrli/archive/2010/05/14/getting-started-with-sharepoint-2010-and-sharepoint-2010-advanced-developer-training.aspx
    https://msdn.microsoft.com/en-us/library/office/dn833463.aspx
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Patrick Liang
    TechNet Community Support

  • Contact view

    hey guys....
    i'm new to blackberry ... i currently HATE how my contact view listing is right now...all its showing just t he name....i do not have an option to show the name and the number....can someone help me to change this view cause i tried everything

    I think you failed to even mention what BlackBerry device model you have. Might help to know
    So, if you have Bob Smith in your Address Book listing, and you select Bob Smith, you don't see any phone number? How about email address or anything? Just the name and only the name?
    Do you have a phone entered in that contact?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I'm wanting to use the "Actions" in Photoshop Elements 11.  But when I get the Actions box up, it is only showing a small list of effects to use.  And no side bar to go any further.  When I click on the little arrow at top and then click on "load actions"

    I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further.  When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search".  The folder at the top does say "Actions".  How do I get more effects?  The tutorials that I've checked into all show a long list of effects in their box.  Can anyone help? 

    To use the existing actions, try the following:
    1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
    2. Then click on the name of the Action, in this example Faded Ink is the Action name.
    3. Then press the Play button to run the action.

  • In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

    In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

    Thanks for chipping in.   I discovered something after trying what you suggested.   I have quite a few collections of hits by year from Time Life and Billboard.  I've eliminated duplicate tracks that appear in both collections (or other CDs for that matter), but cross-reference the CD where I deleted the track and placed in in the comments section of the CD track I retained.   If I "search" by song name, only the remaining track appears.   But if I want to hear for example Classic Rock 1964, only those tracks remaining would be there when I pull up that CD.   So, I type "Classic Rock 1964,"  in the search field.  First the boxes on the right of the screen open up showing album icons.  Showing four tracks by album with a button to view 10 more, then four songs with an option to vies 18 more.   I finally noticed that at the top of the boxes is a blue band that reads, :Show Classic Rock 1964 in Music.  When I double click on this blue band, all 24 tracks from the original CD appear in the song list format even though I had deleted two of them because they appeard in a Beach Boys CD.   On those tracks, I had referenced Classic Rock 1964 in the comments field.    So, bottom line, Search will also look in the comments field if you click "filter by all" in the magnifying glass to the left of the search field.   And you can move all tracks that if finds into a song list by double clicking on the blue band.

  • Auto Focus in List Tile View in iPad : AGENTRY

    Hi All,
    I am facing a critical problem. I have a screen with two List tile view. The object assigned to the screen is MainObject and the two List tile views display Collection1 and Collection2.
    Now the requirement is user should select an object from either Collection1 or Collection2 and press on continue button.
    I am using an iPad as device. The problem is when the screen is displayed, the first object from each List tile view is automatically focused. I can't change the Initial focus setting at all. Whatever entry is given in the Focus field, the first objects of both the List Tile views kept on selected.
    Is there any resolution so that I can atleast define the initial focus??

    In terms of setting the selected item in a tile list you can use the List Selection action step.
    So in your action that displays the screen, after the navigates step add a List Selection step (or two in your case) to set the initially selected item in each list.
    You will specify the Screen Set / Screen and List Control that the step will act against and then define how you want rows selected (By Rule, First Row, Last Row, Next Row, None).  In my example about I am using a rule to select the first row where my rule returns true.
    While I have done this for a single list successfully I have not tried with two lists but don't see any reason it shouldn't work.
    --Bill

  • Highlighting a List Tile view by default

    Hi Experts,
    I have a screen with list tile view having list of objects. When I navigate to that screen I want that the first object on the list be selected by default.
    I created a style for the selected row but each time I have to click on the first element to get it highlighted.
    Is there a way to get the first element in the list highlighted without clicking on the list?
    Can this be accomplished by List view or any other element in agentry? 
    I am using Agentry version 6.1.4.1004  and SMP 2.3.
    Thanks in advance !!
    Regards
    Amitoj Singh

    Hi Amitoj,
    For this you can use List Selection Step in Action
    1)Go to Action which navigates to this list tile view screen.
    After navigation step just add List Selection Step in action stpes as shown below.
    2)Configure Its Details as shown below.
    Also you may write a rule to select a particular tile from that list tile view instead of SelectRows->First Row.
    Hope this helps,
    Regards,
    AK

  • List Tile View not working with include rule on iOS?

    hi Expert,
    I used the List Tile View with include rule in Agentry 6.0 on WinCE before to generate "selected" object list upon different conditions, e.g., assigning tasks based on scenarios.
    Currently, I am experimenting the same function on iOS tablet.
    On the start screen which is a detailed screen for main object, there is a List Tile View and an include rule. However, the objects in the tile list are not updated correctly when the output of the rule changes. Note that the same include rule works perfectly with a List View for the same collection.
    To my observation, the problem seems to associated with "update" of the tiles when result of include rule changes. For example, in scenario 1, there are 5 objects in the list; switching to scenario 2, there are 10 objects. From the No.6 to No.10, the objects are correct. The No.1 to No.5 are still the original 5 objects for scenario 1.
    When the user clicks on tiles, it makes the situation worse. Normally, a single object's tile will always be shown in the selected tile regardless which tile is selected from the list.
    My development environment is 6.0.40 and the client is 6.0.40 on iPad (iOS 7.1). I would like to know whether this is a known issue before I provide more details.
    Thanks.
    -Yang

    hi experts,
    When I asked the question on this list tile view refreshing issue, my dev environment is Agentry 6.0.38.
    In Agentry 6.0.40.1's release note, there is a fixed
    AG-25821  iOS 7 refresh issue with iPad tile list
    However, I currently have Agentry 6.0.42.1 on iPad (iOS 7.1.2). And my editor/server is 6.0.42.0. I still have the list tile view refreshing issue. The same rule can be used on list without any problem. But the list tile still has trouble on display the right set of objects.
    My question is is that fix related to the problem I saw?
    Thx.
    -Yang

  • Enhancement view does not appear in my list of views

    Hi ,
    I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
    Please help!
    Regards
    Shilpi

    Check whether you are in Enhanced Version of UI Component !  (Original UI CMP name and Enhanceset : Z*)
    Thanks
    Allot points if this helps !

  • Go0gle toolbar is listed in VIEW and space opens but no toolbar appears

    It disappeared spontaneously and, even though it is listed under VIEW and space opens it will not appear.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Contact View "Online" doesn't show non-skype users

    After the latest update/patch whatever, the "Online" Contacts view no longer shows contacts that aren't using skype, even if they are online. I now have to use the "All" contact view to see some of the people who are online but using messenger, even though previously they would all appear under online contacts. Not very intuitive.

    Same issue here. Started with the last update.  None of my online Messenger contacts show up now when "Online" Is selected.  I have to select "All" to see them.

Maybe you are looking for