Smalls vibrations and smalls electrics chocs... What is it??

My computer has small vibrations and gives me (sometimes) small electric chocs... what should I do? What is it??

AASP's Outside of the USA
User Groups

Similar Messages

I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

Those are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

Mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

Hi
It's likely your fan, It always runs on a MBA. Mine is very quiet, others report some noise - here is one link. There are lots of others.
Hope this helps
Cheers
https://discussions.apple.com/thread/4381367?start=0&tstart=0

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column, find the 10 lowest numbers, then get the average and after that multiply it by .96 I used to use Excel and the formula worked fine in that. Here is my Formula
=(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96 So instead of using 1 cell, I'm using 12 cells to get my answer.
This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
Hoping I explain myself well enough and that someone can help me.
Thanks

You can still do it in one cell but it will be more unruly than the Excel array formula.
=average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
where you would, of course, replace the "..." with the remaining six SMALL functions.

My sceen is flickering and i live in a very small island with no apple store, what can i do? i bought it 3 weeks ago on ebay.

Hallo, who can help me whit this problem? My band new iphone 5 sceen is flickering and i live on a very small island with no apple store, what can i do? i bought it 3 weeks ago on ebay and just start flickering the next day i recieved it.

Contact the seller and eBay to return the iPhone for a refund.
eBay is not an authorized Apple retailer. Sounds like you were sold
a broken iPhone.

On the top left of my computer screen there are what look like the bottom half of small grey and white squares stacked on top of each other. They form a line about three inches long and I cant seem to get rid of them. Is my computer dying or being hacked

On the top left of my computer screen there are what look like the bottom half of small grey and white squares stacked on top of each other. They form a line about three inches horizontally along the top and they cover half of the regualr bar (so half of the apple sign int he corner is covered) and I cant seem to get rid of them. Is my hardrive crashing or being hacked?

I have never seen DEVELOP on the menu bar for Safari, hence my query regarding testing.
What OS are you using and what version of Safari?
If you want to check your HDD, Open Disk Utilities>First Aid and run Verify and Repair.
The only remedy that I can think of that may work is an OS reinstall.
I seriously doubt that your MBP is being hacked.
Ciao.

In putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I wnt to red

picture size...in putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I want to reduce the image to fit the size of the box.

If you right click on the image on the page in the context menu select photo box alignment and then select one of scale to fit {centered, Left-aligned, Right-aligned}
That should do what you are loking for.

When I tried to print my boarding pass from Continental, all I received was a page of small letters and numbers.

When I tried to print my boarding pass from Continental, all I received was a page of small letters and numbers.

I see where you say a newer version fixed the printing bug, but when I try to check for updates, it tells me I have the newest version. Your posts concerning the small print questions are a month old. What do I do?

MSOutlook HTML newsletter issues - large gaps between large images and small gaps...

Please can you help me!
Searched the web & found plently of advice but still getting formatting display issue when viewing HTML newsletter in MS Outlook.
Fully aware on the basics regarding the multiple issues when creating HTML newsletters but this is driving me crazy.
Apparently there is a image height limit within Outlook (can't find out what this is) so I have sliced my larger images into 5/6 parts which solves the display issue in Outlook.
But the gaps between the slices are now being displayed as small blank spaces within Hotmail.
I did use between each slice as without caused the fixed 600px wide containing table to expand due to the slices stacking hoz.
Also still getting small gaps (like spaces) between all images in Outlook when displaying perfectly (no gaps) in a browser.
This is my newsletter displaying correctly via a browser:
http://eu.shorts.tv/site-admin/modules/mod_mail/SHORTSTV_DECEMBER_2012.htm
Using Dreamweaver 4 (do have the latest version via Adobe Creative Cloud Membership but not on this system).
Hope you can help
Many thanks

Many thanks David
I also found this article which is currently sitting on my desk.
Pdf would make perfect sense or even a url link to view via a browser but these guys need it contained within the email.
Thanks again for your kind advice.
Regards
ShortsTV
Date: Fri, 30 Nov 2012 18:05:08 -0700
From: [email protected]
To: [email protected]
Subject: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
 Re: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
 created by David__B in Adobe Creative Cloud - View the full discussion
Hey Shortstv, Not something I know much about, searched and found thishttp://robcubbon.com/create-html-email-newsletters-outlook/ Maybe create it as a PDF attachment instead? -Dave
 Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4888255#4888255
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4888255#4888255
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4888255#4888255. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Best way to capture data every 5 ms (milli-seconds) in the .vi diagram when using "Time between Points, and Small Loop Delay tools" ?

- Using LabView version 6.1, is there anyway to change the "Time Between Points" indicator of (HH.MM.SS) to only (mm.ss), or to perhaps only (.ss) ?
- Need to set the data sampling rate to capture every 5 milliseconds, but the defaults is always to 20 or greater; even when the "Small Loop Delay" variable is adjusted down.
Thank you in advance.

I have no idea what "Time between Points, and Small Loop Delay tools" is. If this is some code you downloaded, you should provide a linke to it. And, if you want to acquire analog data every 5 milliseconds from a DAQ board, that is possible with just about every DAQ board and is not related to the version of LabVIEW. You simply have to set the sample rate of the DAQ board to 200 samples/sec. If it's digital data, then there will be a problem getting consistent 5 msec data.

Select a small area and then use the selected area to paint other areas of the image

Hello
My problem is a little hard to explain but I try.
What I want is to select a small area and then use the selected area to paint other areas of the image. Do not know how to do it and if it's stamp tools or pen tools to be used?

Howdy.
Sounds like you're looking for the Clone Stamp Tool. Set to Aligned, the sampling point resets when you release the mouse after painting. Untic Aligned and the sampling point stays in the original spot for the next stroke. It's a good idea to clone onto a separate layer with Sample All Layers selected. Then you don't lose original pixels. Allows you a do over later.
FWIW.
Peace,
Lee

I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

HELP I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

Use Photoshop menu Help>system Info... use its copy button and paste that info in an append here.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Roll over a small photo and above it (or beside) the large photo is displayed

Hi All
What is this called: When you roll over a small photo and
above it (or beside) the large version of the photo is displayed. I
would like to create a photo gallery that works this way. Could
someone tell me what this is called? Or better yet, where I can
learn how to do this? A free tutorial perhaps?

c2design,
> What is this called: When you roll over a small photo
> and above it (or beside) the large version of the photo
> is displayed.
I don't know that the phenomenon has one ultimately correct
name. I
might call that a "click to enlarge" or "rollover to enlarge"
effect.
> I would like to create a photo gallery that works this
> way. Could someone tell me what this is called? Or
> better yet, where I can learn how to do this? A free
> tutorial perhaps?
Flash generally provides many ways to accomplish a desired
task. One of
the easiest ways I can think of to get what you're after is
to create a
button symbol. Put your small image (the "thumbnail," it's
usually called)
into the button's Up frame. Put the large image in the
button's Over (and
perhaps Down) frame. In the Hit frame, put a shape that
represents where
you want someone to roll over in order for the Over frame to
show.
Typically, you'd just put the thumbnail into the Hit frame at
the same
horizontal and vertical position it was in the Up frame.
You could also program this effect with ActionScript, but
since you
posted in the general forum, let's see what you make of the
button approach.
Write back if you still have questions. :)
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Pros and cons between the large log buffer and small log buffer?

pros and cons between the large log buffer and small log buffer?
Many people suggest that small log buffer (1-3MB) is better because we can avoid the waiting events from users. But I think that we can also have advantage with the bigger on...it's because we can reduce the redo log file I/O...
What is the optimal size of the log buffer? should I consider OLTP vs DSS as well?

Hi,
It's interesting to note that some very large shops find that a > 10m log buffer provides better throughput. Also, check-out this new world-record benchmark, with a 60m log_buffer. The TPC notes that they chose it based on the cpu_count:
log_buffer = 67108864 # 1048576x cpuhttp://www.dba-oracle.com/t_tpc_ibm_oracle_benchmark_terabyte.htm

Photoshop CS3 can't do lowercase type-only large and small caps

Photoshop CS3, G5 PowerMac Dual 2GHz w/ 7GB RAM
A weird Photoshop problem: using the type tool, I can only produce type in large-and-small-caps, as opposed to upper and lower case. I can't generate any lowercase text. I've tried all the usual diagnostic tools: trashing the prefs seemed to work at first, but it's destructive of other stuff I don't want to lose, and anyway the problem came back after a while. I tried the Phantom User, and learned that the problem is tied to my User Identity, i.e., the problem doesn't exist in other User identities, but how do I make use of that information? I considered migrating to a new user identity, but I would have to go through every single appliciation, blah blah blah. So: does anybody have a quick, elegant solution to this, or is this a problem that has suddenly cropped up elsewhere? I'm not crippled by it, thanks to Illustrator CS3, but it's a convenience that I miss. And how do I trash the PS prefs without losing my brush tool presets?

Birck, >trashing the prefs seemed to work at first, but it's destructive of other stuff I don't want to lose, What "destruction" are you talking about? >and anyway the problem came back after a while. I assume this happens with fonts other than those (such as Trajan Std) that were designed with just caps and small caps. It sounds like it may be a duplicate or corrupted font issue. Did you use a good font manager to check for duplicate or corrupted fonts? Did you clear font caches (with Cocktail)? > tried the Phantom User, I see a black mask, cape and scary organ music here. <g> If logging in as a new user clears the problem, you may have a corrupted user identity and should stop using it. Neil

Smalls vibrations and smalls electrics chocs... What is it??

Similar Messages

Maybe you are looking for