Smaple rate problem with FCP 7

Hi!
I have a problem with the sample rate on FCP 7
After the capture comes this message:
The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape.
My vide playback preset is Apple FireWirePal and the audio Firewire DV
What can I do for this?

If you look in your camera menus I am certain there is a way to turn on the display that shows the sample rate of your audio. It will say either 12-bit or 16-bit. 12-bit on the camera is 32k, 16-bit is 48k.
As Michael says, if it's not drifting out of sync you don't have a problem in FCP. The only thing is you may have a problem with the camera not recording correctly, which may cause other problems.

Similar Messages

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Not here; updated three systems without issues.
Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
Russ

Problems with FCP 5.1.4 and OSX 10.4.9

I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?

Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric

Problems with FCP and Nvidia GeForce 8600M GT video card

Not sure if this should be in the MacBook Pro forum or this one...
I am having trouble with the GeForce 8600M GT video card while editing in final cut pro (and after effects). I have talked with numerous people at applecare, but they say that they are unaware of issues regarding the video card.
The problem: It's almost like the card is unable to keep up with professional video applications. Whenever there is movement in the video I'm editing, I get lines across the screen. Not sure to how better to explain it than to say it looks like the video card is having a tough time refreshing. (I can take the same video to a much older power book, and it plays perfectly, so its not the source file.)
At first I thought it was an FCP issue, but I just started using after effects, and I'm having the same problem in there. If I edit in after effects, when I play it back (in after effects), I get the lines. I can then export the project to a quicktime file. The quicktime file plays perfectly (no lines) when not involved with a professional application. Then if I import the same quicktime file into FCP and play it back in FCP, the lines happen again.
Is anyone esle having this problem? Any thoughts? Any solutions?
Thanks!
Michael
Message was edited by: mjaffe00
Message was edited by: mjaffe00

I had searched the macbook pro forum, but not this one. It seems that the "screen tearing" issue has been talked about a lot, so I apologize for the repetitive nature of the post. I will say that I am fairly shocked that given how many people have clearly called applecare, no one there seems to have a clue that there is a problem with this video card. I have talked with at least 4 different people in the FCP specialty group, and not one had any clue what I was talking about... 3 of the 4 were fairly insistent that it was a video source issue on my side.
Message was edited by: mjaffe00

Problems with FCP playback on external LG monitor

I have just purchased an LG 22EA63 external monitor to use with FCP 7. Monitor connects fine, works ok with other programmes but once in FCP , when i transfer both canvas and viewer windows onto the monitor, playback in not smooth with flickering streaks as if the footage is interlaced (even though my current project only has progressive footage). However it gets even worse with other FCP projects that contain interlaced footage - playback on canvas is even more jerky and streaky, and the viewer window is unable to play back most alterations made to clips (especially anyhting to do with motion or speed), making clips jaggered and unwatchable.
Any ideas what the problem is? I'm assuming it is to do with the LG screens' native resolution which is 1080p , but that doesn't explain why it is failing to play progressive clips at full quality.. Also I couldn't find another resolution setting that worked.
I am connecting via HDMI to a MacBook Pro (2.8ghz Intel Core Duo, NVIDIA GeForce 9400M, native screen res: 1440x900).
Obviously if I cant fix this I'll have to take the monitor back, any ideas or advice would be much appreciated.
Thank you!

I guess it's more accurate to say that there is a dramatic delay in the video between what I'm seeing in the playback window on my computer monitor and what I'm seeing on the external NTSC monitor. The audio does not have that delay, so on the external monitor the audio and video are out of sync. It makes it difficult to show anyone what you're working on, which is what the "client" monitor is supposed to do.

Mouse problem with FCP: drops clips or do not respond to clicks.

hi to all.
since i bought my macpro i've been noticing a very annoying problem when using FCP. there's a moment when the mouse stops to work properly and begins to drop clips when i try to move it or do not respond to clicks. two examples: 1- i want to move a clip from the end of the timeline to its beggining. in the middle of the way, it just drops the clip, as if i stoped pressing the mouse button. 2- i choose the pen tool so i can play with opacity and create fades. in the middle of the process of adjusting, it stops to work. i have to keep pressing several times to complete the action.
the problem is basically with the CLICK function. the cursor responds to the mouse properly, but when you click something to move it, it doesn't recognizes when you stop it and drops things. it happens only with fcp.
i'm using fcp 6.0.1, though the problem happened when i was using fcp 5.

I have a similar problem with my mouse in FCP. Perhaps not the same thing, but I think I figured out it's due to the design of the mouse. It's an Apple A1152, a white one-button mouse with a little scroll wheel. The thing is the whole top presses down for the click, and if I don't grab the two little tabs on the side that give you the leverage to keep on pressing the top, across larger distances I lose the pressure necessary and I drop whatever it is I was dragging. It's a pain because my hand is not the right size or shape to naturally get a hole of those little tabs. I don't know if your problem is related in any way but I thought I'd mention it just in case...,

Problem with FCP since update to 10.0.6

I'm up to date on Mac OS X and FCP, but since updating to FCP 10.0.6 switching events causes it freeze.

Jwrbloom wrote:
Trashing my preferences???
Corrupt preference files are the cause of many many problems in FCP X. If that is the cause of your problem, then deleting preferences will solve it; otherwise it will at least do no harm.
(In case you don't know, most applications keep your preference settings in little files with .plist extension, in a "Preferences" folder. You usually don't notice and may not care about it unless they become corrupted and then your software may malfunction - as is the case here)
Pref Manager, which I mentioned in the previous post, is a free software which can delete (and optionally backup and restore, in case you want to) these .plist files, without you going to look for them in the Finder.
Deleting preferences does NOT affect your events and projects - it does not touch them. So it is innocuous and usually the first thing to try when FCP X misbehaves.
Jakob's post may well be on to something, especially if the problem happens with some events and not others.
If deleting preferences does not solve the problem, then you may have to delete some folders in the Finder. But let's not get ahead of ourselves. I suggest you delete preferences and report back.

Update to OS 10.6.5 causing video problems with FCP

I stupidly updated to 10.6.5 this morning and ever since all video displayed in FCP appears to be underexposed by 5 or more stops. To give you an idea, it looks as if I applied 3-way color corrector and crushed the blacks 1/2 to 3/4 of the way down. This happens to all video in both the canvas and viewer window no matter what project I have opened. At first I thought maybe it was a problem with my graphics card but all of my qt files play fine. And if I go to the clips I am referencing in FCP they are fine when viewed through quicktime. I have tried the following:
move media to a different location and reference from there
install the combo version of OS 10.6.5
trashing my preferences in FCP
completely reinstalling FCP
none of these have worked.
I assume the other idea would be to reinstall my OS back to 10.6.4 but then I would have to wipe my hard drive right?
Very frustrating because I am in them middle of a project and now I can't work.

Someone will say "Restore your backup, the backup you made before you upgraded to 10.6.5." Just warning you.
I'm also using 10.6.5 but I've not seen what you're describing. Maybe something is that more specific to your setup is causing it. If you export a QuickTime movie is it also fine or is your video output fine? If it is then you can keep working, because you know that the problem isn't affecting your output.
Going back to 10.6.4 may be the thing to do, and yes you'll need to wipe your drive. So back up your system as it is now just in case the 10.6.4 reinstall fails spectacularly.

Serious problem with FCP import

Hi
I wonder if anyone is having the same problem with Final Cut Pro importing into Premiere Pro CS4 - basically it all looks fantastic until, on any sequences with audio fades or anything more complex than just clips having been dropped onto the timeline in a straightforward manner, you try and drag anything or copy and paste it elsewhere: "serious error" pops up in a dialogue referring to a .cpp library (or something) and crashes the whole program.
Having now installed CS4 Production Premium on a desktop and laptop (both with different OS - XP and Vista) and both coming up with the same problem at pretty much the same point in the import/editing process, it seems that the FCP import is seriously flawed. Really disappointing.
Is anyone else having this issue? What can I do about it? The errors mean nothing, it is so difficult to know where to begin to start to try and fix the problem or find a workaround.
Thanks,
Andy Campbell
www.onetooneproductions.com

Thanks for replying. The clips are in Quicktime format. Basically I am taking over an edit that was started in FCP on the Mac and trying to finish it in Premiere Pro CS4. However any even slightly complex timelines crash when you try and drag or select certain clips. I can't find any one common aspect of a clip or series of clips that makes it crash otherwise it might make some sense.
Josh Townsend's advice on the forum about exporting as AAF however has really helped me - I have taken the sequences back into CS3 and they work perfectly, no problems, although a little slow. Shame it has to come to that though; working in CS3 again rather than CS4 when I've just upgraded.
Playing or rendering the sequences from FCP in CS4 actually works. Even scrubbing works. But selecting or trying to drag just causes a serious error that flushes the whole program down the toilet.
Thanks,
Andy

Round Trip problems with FCP, Motion and 16:9

Hello all-
I've been having some problems with FCP5 and Motion 2. I am working with anamorphic footage (mini dv), and my problem lies in trying to use the "send to" feature in FCP to Motion 2. If I send some footage to Motion 2, edit it, and then go back to FCP to look at my edit, the anamorphic flag has been removed... the video is squished and there are black bars on the right and left sides of the film. I can easily fix this if I find the clip in the FCP browser and check the anamorphic flag, then drag and drop that clip over the original in the sequence, but I was wondering if there was an easier way. Is there a way to make it be anamorphic when it comes back into FCP from Motion 2?
Thanks!
Dual 1.8 G5/2GB & 12 PB G4/1.25GB Mac OS X (10.4.4)

Yes, it loses the anamorphic flag on round trip. Just
ctrl/right-click on the Motion project in your
timeline, select Properties/Format and click on the
anamorphic setting column.
Patrick
Patrick-
Thanks for the reply. That's exactly what I've been doing, but I was just wondering if this was an actual bug or not. I guess we will have to wait for Apple to fix it...
BTW- Whenever I check the anamorphic culumn, I always have to re-drag and drop the clip in the timeline again. Is this right? Or should it go ahead and change it in the timeline automatically?
Thanks again!
Dual 1.8 G5/2GB & 12 PB G4/1.25GB Mac OS X (10.4.4)

Rendering and lagging problems with FCP X

Hello,
I am working on a Mac OS X Lion 10.7.3 (11D50b) - Processor 2.4 GHz Intel Core i5 - Graphics NVIDIA GeForce GT 330M 256 MB and Memory 8 GB 1067 MHz DDR3.
My 30 minute project has been completed but every time I reopen it, there is a short sequence that always needs rendering. It takes a very long time for this sequence to render and FCP X regularly crashes and slows down. The software is very slow and sometimes non responsive.
This is my first try with FCP X. I've been working with FCP 6 and changed to FCP X recently. I’ve imported a lot of jpg and mp4 files. I import with proxy and optimized files and analyzed preferences. I’ve tried running my project with my hardrive as well as my external hardrive.
FCP X is generally lagging and unstable. It also slows down my computer.

mp4 files. I think that is not a good idea to use that format with FCPX. With my camera I have the options to use mov. (native for FCPX) or mp4. I use mov.

Import Problem with FCP quicktime file.

Hi,
I exported my 18 minute video with FCP quicktime (instead of quicktime conversion I did export quicktime video in FCP). When I try to add this video to DVD Studio Pro, The first thirty seconds of video import and all the sound imports but no video imports after that first 30 seconds.
Does anybody have any idea what this is?
Thanks!

Sounds like a corrupt file. You should try opening it in QT and then saving it out with a different name if it works OK there. Be sure to make a self contained file, not a reference file.
However, you may find it better to export from FCP through to Compressor and create your MPEG2 files there before bringing them in to DVDSP. This is a better work flow for lots of reasons, ensures you use a dedicated encoder and releases DVDSP to concentrate on what it does best (which certainly isn't the encoding, IMO!)

Capture Problem with FCP 5.1

I just loaded 2 new titanium macbookpros with 5.1. When testing the basics of the programs I found that one worked fine and the 2nd kept quitting FCP when I batch captured some test clips. I tried throwing out the preferences and when that didn't help I tossed the entire program and all related files and reinstalled the suite. Still having the same problem of quitting on the capture. What do I do? I'm leaving for India on Thursday and need a solution yesterday! Has anyone out there had a similar problem or did I just buy a faulty computer?

I know you said you threw out your preferences, but have you tried it using FCP Rescue? If not, try this link, download the correct version, then follow the additional instructions posted below by Brian Conner in a previous thread.
http://www.pistolerapost2.com/fcprescue/
"In some rare cases, you have to modify that sequence of actions.
After the step where you trash the prefs in Rescue, quit Rescue, start FCP, create a new project & change a couple of settings. Doesn't matter what, because later you'll be trashing them.
Now quit FCP and Shut Down the Mac. (Shut Down, not Restart.) Then boot up again. In a Finder window, confirm that the FCP preferences files exist.
Now start FCP again and set the prefs the way you want them. Close the project, so that NO projects are open. Quit FCP.
Open FCP Rescue 5. You should not be getting a corrupt settings message. Click Backup and quit Rescue."
Hopefully that will do the trick, or post back if still needing help.
K

When is Apple going to fix the problems with FCP and Leopard

Apple,
This is a nightmare.
I wish I never did the upgrade.
It's horrible that Apple released an OSX update that doesn't work with some of the most used Apple applications.
I don't know what I should do.
Compressor doesn't work, export using Quicktime is having problems...and that's just what I've found so far.
When is Apple going to fix this mess?
Hingefactor

Did you heed ANY of the warnings that were posted here, on LAFCPUG.org, or the CreativeCow.net? We gave many pointers on what to do before you upgrade, so that if you do run into issues with the new (and you WILL run into issues with the new OS) you could always go back to the stable version.
http://discussions.apple.com/thread.jspa?threadID=1185645&tstart=150
http://discussions.apple.com/thread.jspa?threadID=1196292&tstart=300
Apple will fix it when they fix it...that's all we can say. Keep sending in your issues and when they can, they will issue updates.
The rule of thumb is that if you have a good working edit system, don't mess with it. The machine that I use to earn a living, that is still on 10.4.9 and FCP 5.1.4. My laptop, that I use occasionally for editing, but mainly for e-mail, word processing, web surfing, that I updated. And I am testing FCP on this. So far, I am not suffering any issues.
If you backed up your system, you could have gone back to it.
Shane

Firewire Drive/Camcorder Problems with FCP

I seem to have a recurring problem connecting a DV camcorder and a firewire hard drive simultaneously. Most recently I was trying to set up FCP to output to a camcorder I had connected - and during the configuration, my hard drive (a western digital MyBook) un-mounted while FC was running. I couldn't get it back for awhile and thought I'd lost my client's project and all the rest I had on that drive. Luckily it returned. But I've had this problem in the past with Avid system on a PC, in that case a Seagate drive...it makes me think I'm doing something wrong here. I'm not the savviest when it comes to technical issues with hardware & such, I really just want to edit.
Also, twice within the year my logic board on my powerbook g4 has been replaced due to a bad firewire, another issue that happened in mid-project. I don't know if the camera did it, or the drive. The tech at Apple said I hadn't done anything to cause it...but it happened twice.
I guess what I'm asking is, is there a method or a sequence for connecting a deck or camera to my system when working with external firewire drives? Are these issues with the hard drive manufacturer, my system, or my own error? Are there any major DO's and DONT's in this area and what am I doing wrong?

So, from what I understand...supposing nothing external is connected to my machine...power down, plug in my firewire drive and the camera, then power up, then run FCP? At what point do I turn the camera on, while the computer is still off?
I'm sorry I'm not sure I understand the BUS concept? As of now I'm using the rear fw400 port for a hard drive and the front for the camera.
Why did the drive crash when I was in easy setup on FCP?

Smaple rate problem with FCP 7

Similar Messages

Maybe you are looking for