Smart ac adapter power output is too low for this computer on business notebook 6830s

Hallo,
Sometimes he is charging, sometimes he isn't.
I think it's a bad contact between the plug of the power adapter and connector on the motherboard.
Can I do something to improve the contact ?
thanks
Jos

Hi Erico,
erico wrote:
CKDewey wrote:
When I remove the battery, it will not boot at all. Is this power supply DOA? The computer seems to know it is plugged in when Windows is running...
That sounds as if that could be the case. Is the power adapter an original HP or is it an aftermarket brand?
If your notebook was delivered with a 65 Watt Power adapter the it is recommended that you replace it with an identical power adapter. Don't try to second guess the engineers who designed the notebook.
Best regards,
erico
I believe it is an original power supply; the model number is noted in my original post. I really would like to agree with you about second-guessing the engineers, but I have seen too many poorly designed systems, including one in particular from HP.
At my last job, our CTO was an HP fanatic, and owned the largest and most powerful HP notebook at the time. I helped him to order a docking station for it based upon the HP compatibility list. When the docking station was connected, he encountered numerous strange power-related problems, and especially had problems with USB devices connected to the docking station ports.
It turned out after a bit of experimentation that the power supply that came with the docking station was inadequate to power the set-up, and using a larger supply completely resolved the issue.
However in my case it does appear this might be a dead or counterfeit supply. I will test it on my colleague's notebook, since it is identical except that he is running Windows (SP)7. I will update you with my findings. Thanks for your help.
Cheers,
Tom

Similar Messages

'Smart ac output adapter is too low for this computer'

I have got this error message after 1 year using my Hp 6930p.
And also the HP battery check says that the battery needs replacing.
So is that plainly battery error or anything else may happen to my computer.
Please, help me. Thank you very much.

If you want to give Kudos click on the Kudos icon and you will give Kudos, but hey I appreciate the shout out anyway.

SP2-0614:Server version too low for this feature

Hi,
In the preparation phase for Oracle 9i upgrade, (Step 3.7 - Oracle 9i-Unix upgrade Guide)
we ran @CHECKS.SQL under /oracle/stage/920_64/Disk1/SAP directory
received errors SP2-0614:Server version too low for this feature
ORA-01034:ORACLE not available
Source System: Oracle 8.1.7.4, Kernel 620, HP-UX 11.11 9000/800
I went though Oracle site for this issue and it says, that we need go for patch to resolve this issue. But I am not sure, if this is needed or not. Shall I can continue upgrade without this patch?
Please help me to resolve this issue.
Thanks in advance
Regards
Srinivas

what is parameter value for <compatible> in initSID.ora ?
it should be set to 8.1.7.4

Low Battery - Battery too low for Radio use - And Curve will not Charge - HELP!!!

Need help and lost without BB. My BB displays Low Battery. If I try and make a call I get Battery too low for Radio use. I have tried to charge the BB but nothing happens and still cannot make call or charge unit. Tried charging overnight with car charger and A/C adapter. Tried removing battery for one minute and reinstalling.
Any ideas????

Greetings, and welcome to the BlackBerry.com Support Forums.
When you are connected to the charger, do you see the lightning bold charging symbol displayed over or next to the battery indicator on the screen of the device? If so, then let it charge a while. A battery at less than 10% charge can take an hour or more to get just 10% higher, and then the charging will move faster.
If you are not seeing the charging indicator, then you could have a bad USB port.
If you connect it to your PC via the USB cable, does the BlackBerry appear to connect?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Too low for radio use at 50%

my blackberry 9360 with the newest update out when at 50% battery comes up saying too low for radio use then just suddenly goes from 50% to 0 in a matter of seconds as i watch it cant down faster than anything. i tried pulling battery out when fully charged with charger in but still not working how do i fix this?

Oh...sorry...I think I was not clear..."known good" and "new" are not necessarily the same thing. While rare, a new battery certainly can be defective. Plus, finding someone with an identical BB without these same problems, and trading batteries, is certainly a less expensive method for carrying out this test. Again, sorry about not being clear on that point...
Anyway, refer:
KB14320How to maximize free space and battery power on the BlackBerry smartphone
It is really quite impossible to predict the "normal" consumption rate for any individual user -- each person is unique, and will demand a different level of resource consumption from everyone else. To me, the key is to determine what is normal for your usage patterns...and then become concerned when things deviate from that.
It is also always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Warning: PROCESSES may be too low for current load

Hello,
I have 64 bit centOS Server and have oracle 10g installed on it.
We have 8GB RAM and 64 bit Server but we were able to install oracle on 2GB SGA only.
From few days I am facing following error:
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=115, want 8 more but starting only 0 more
I have executed following commands:
ALTER SYSTEM SET max_shared_servers=200 SCOPE=MEMORY;
ALTER SYSTEM SET circuits=300 SCOPE=MEMORY;
But I am still getting the same error,and server average load goes too high and needs a oracle restart.
Please let me know in case any one has solution for this problem. Its urgent.
Thanks in Advance.

Sir ,
please see the output of the below query .
this error had found today early morning when rman backup get start .
SQL> show parameter process
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 10
log_archive_max_processes integer 2
processes integer 500
SQL> select count(*) from v$process;
COUNT(*)
93
SQL> select count(*) from v$session;
COUNT(*)
94
the error msg in the alert log file is
Warning: PROCESSES may be too low for current load
shared servers=1, want 1172 more but starting only 405 more
Edited by: user9353210 on Jan 4, 2011 9:30 PM

Blackberry curve 9320 batt too low for radio use

I have had this fone since june and have constantly had probs with the battery life.its now sayin battery is too low for radio use even when there is half a white bar.keeps cutting out during calls.I've constantly got to do a battery pull!any ideas??

Hello guys,
I found the solution! I have 2 9320 and both developed this problem after 5 or 6 months. Battery too low for radio use even if nearly fully charged. I tried everything what described here- battery pulls, soft reload, deleting apps, pulling battery out with charger connected- nothing worked- just dont waste more time. The solution is easy and its not software problem! Just open your phone- if you dont know how check on youtube so you don't damage your phone and simply clean battery connector in a place where it is touching the mainboard. My bb board was black in that place- came off easily and connectors on mainbord looked like new after. I used zippo lighter fluid and clean cloth. Since then no problem on both my blackberries- never switched radio off again with battery not beeing red. I think there was not enoug power flow through this connector causing me going crazy. Now my blackberries are amaizing again! Hope it helps!

PCTFREE too low for a table

Hi,
Looking at the Server Statistics in Toad, I see that I have "PCTFREE too low for a table". How do I know which table?
Thanks,
Johanna

Don't know much about "Toad Statistics" but which version of database are you on?? and are you using LMT?? Run statspack for more accurate statistics and it will be helpfull to identify the root cause. Are you experiencing any performance problems??
Daljit Singh

Battery too low for Radio Use - Even on Full Charge

Off late I have been having an issue with my BB Curve 9320, even when battery is fully charged, at the time of checking SMS, BBM Messages or Whats App Messages, the phone show up with "Battery too low for Radio Use" And put off the wireless services off the phone. Once I exit the applications the phone turn back on an continues to work as normal, untill I launch BBM or whats app again.
I had given the phone to the Blackberry service centre for this problem, they kept it for a week and gave it back to me today saying the problem has been fixed, however am still getting the same problem.
My phone is still underwarranty, please suggest what needs to be done.
Thanks!

Hi and Welcome to the Community!
Given that you've already begun formal service for this issue, I recommend you continue with that. After all, they said it was fixed, but it's not...don't you want to challenge them on that fact?
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"Battery too low for radio use" - Curve 9320

Since early on my curve 9320 has given me a "battery too low for radio use" warning at very random moments often times when the battery is still halfway into the white area. Sometimes this can be reset manually in the setting by turning radio back on, however this does cut into calls, messages and other activities.
I have changed the battery recently thinking this was the cause of the issue, however this did not help. I am still getting the error...not to mention the short battery life of this device...this is very frustrating.
Is this a common problem and if so how is it solved? Any help is appreciated!
BV

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cpu is too old for this kernel

I downloaded and burned Arch No Panic ISO before 5:00 am today, then I went to the train and started travelling to my parents, it took about 10 hours. Now I am in their house and I wanted to install brand fresh new Arch Linux on my old K6-2 500. All I saw (after many dots) was:
cpu is too old for this kernel
WHY????
686 is not enough today? for installation?
PS. could you recommend small distro with gcc and SDL and Mesa? Slackware? Ubuntu? OK, let's get serious, Slackware?

I know k6-2 is an i586 family processor, but there are two problems, first the name, beacause of the 6 in k6, it can make suppose that k6 means i686. but the main problem is the fact that the official_Arch_Linux_Install_Guide at http://wiki.archlinux.org/index.php/Off … tall_Guide says something like this:
Pre-Installation
Arch Linux is optimized for the i686 processor and therefore will not run on any lower or incompatible generations of x86 CPUs (i386,i486,i586). A Pentium II or AMD K6-2 processor or higher is required. x86-64 architectures are also officially supported.
"A Pentium II or AMD K6-2 processor or higher is required"
now, there are two options: the official guide is wrong, or you would have to be able to install on a k6-2 microprocessor even if it is an i586 one. if is the secon opcion the question is "how?" because i thry to install arch on a k6-2 500mhz with the same result: "cpu is too old for this kernel"

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action.

Can't open Project - The file format is too new for this version of the pro

Hi everyone
I have the following Problem with my Final Cut Express: When I try to open a project i get an error message: "The file format is too new for this version of the program". (my FCE is in german, this is the google translation!)
I have already erased all the rendering files, but no luck.
Please Help!

Have you recently reinstalled FCE and forgotten to update it?

Paging file is too small for this operation to complete.

iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)

Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)

The operation failed as no adapter is in the state permissible for this operation network issue

Hi
I run some windows (2008 r2) servers on the cloud. A couple of servers are reporting a red x in the system tray where the network icon is, and my network adapter has disappeared.Using ipconfig /renew I get:
The operation failed as no adapter is in the state permissible for this operation"
There isn't really more info I can provide. All servers on static private IPs.
Thanks

Hi GSS1,
Thanks for update.
So can we still verify and get information of this missing NIC form device management console on server ? can we still get the NIC by command “netsh interface show interface” ?
what was the latest modification we performed before this issue occurred ? Is there any error or warring event shown in the event viewer ?
Have we installed Hyper-V on this server host ?
We have a KB article that described a similar issue and some methods to verify and resolve this issue on Windows 2003 and XP platform and we may try it and see if that will help:
How to troubleshoot missing network connections icons in Windows Server 2003 and in Windows XP
http://support.microsoft.com/kb/825826/
Regards,
Tiger Li
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Tiger Li
TechNet Community Support

Smart ac adapter power output is too low for this computer on business notebook 6830s

Similar Messages

Maybe you are looking for