Smart album by date (calendar) not working

Ok, so first off, I've got to say I think I'm all screwed...
I'm trying to sort photos in a Project by using smart albums, I thought I would be able to do this by a date/time, but I'm having several issues.
1. I have no idea of the date/time formart, I've been trying what is showen in Aperture, but that doesn't seem to be acurate for example:
Show images between the following:
From: 11/26/11 12:00 AM
To: 11/26/11 6:00 AM
2. What exactly should I use, exif? calednar? date? Capture Hour?
I've been trying alternatives for the past hour and now luck, also the Calendar seems off, why would it show imaegs from 11/25 when I'm clicking on 11/26

I think, the problem is the mixture of am/pm and time zone names. With time zone names you better use 24 hours format.
I just managed to enter a time interval as:
     Date is in the range: 03/01/2010 14:00 UTC to 03/02/2010 23:00 UTC,
but had no luck with MEZ (middle european time).

Similar Messages

  • Smart album from Light Table not working

    Hello. I'm new to the forum so forgive me if this question has already been answered or is very newbie.
    I currently have 1.5 and am going through the Apple Pro Training Series book. I'm stuck on lesson 7. When I try to create a Smart Album of 5 star rated photos, they don't appear in the album. The photos are clearly marked 5 stars on the light table but not in the project, which I think is why they are not showing up in the smart album. Shouldn't they be marked as 5 stars in the project after being marked that way on the light table?
    Hopefully that wasn't too confusing. Can anyone help?
    signed--New and confused

    Answered my own question. It appeared to be an IOTK error(idiot on the keyboard). I just had to check the "ignore stacks" box in the Query HUD. Sorry to waste your time.

  • The SMART ALBUM IPHOTO 6 DOES NOT SEEM VERY INTELLIGENT!

    BOUJOUR
    ALBUM INTELLIGENT
    MA PHOTOTHEQUE EST ORGANISÉ PAR MOIS
    CHAQUE MOIS CORRESPOND A UN ALBUM INTELLIGENT
    JUSTE UNE CONDITION " LA DATE EST ENTRE LE 01-09-2006 ET LE 30-09-2006"
    DEPUIS LA MISE A JOUR VERS IPHOTO 6
    APRES IMPORTATION DEPUIS L'APPAREIL PHOTO LES NOUVELLES PHOTOS SONT IMMEDIATEMENT VISIBLE DANS MA PHOTOTHEQUE GENERAL ET DANS LE DERNIER ROULEAU MAIS PAS DANS L'ALBUM INTELLIGENT CORRESPONDANT
    IL ME FAUT
    SELECTIONNER L'ALBUM INTELLIGENT
    COMMANDE MODIFIER L'ALBUM INTELLIGENT
    VALIDER ( SANS RIEN MODIFIER CAR MES CRITERES DE DATE SONT BONS)
    ET A LA VALIDATION LA PHOTO EST AJOUTER A L'ALBUM INTELLIGENT ET SON COMPTEUR INCREMENTER
    LES ALBUMS INTELLIGENT DE IPHOTO 6 NE SEMBLE PAS TRES INTELLIGENT !
    HELLO
    SMART ALBUM
    MY LIBRARY IS ORGANIZED PER MONTH
    EACH MONTH CORRESPONDS A SMART ALBUM.
    JUST ONE CONDITION "The DATE is BETWEEN the 2006/09/01 AND the 2006/09/30"
    SINCE UPDATE IPHOTO 6
    AFTER IMPORTATION SINCE the CAMERA The NEW PHOTO ARE IMMEDIATELY VISIBLE IN GENERAL LIBRARY AND IN LAST ROLLER BUT NOT IN The SMART ALBUM CORRESPONDING
    I NEED SELECT SMART ALBUM
    ORDERS TO MODIFY The SMART ALBUM AND VALIDATE (WITHOUT ANYTHING TO MODIFY BECAUSE MY CRITERIA OF DATE ARE GOOD) AFTER VALIDATION PHOTO IS ADD A SMART ALBUM AND ITS METER INCREMENTER
    The SMART ALBUM IPHOTO 6 DOES NOT SEEM VERY INTELLIGENT!
    emac   Mac OS X (10.4.7)   Mini Mac

    Gilbert:
    Welcome to the Apple Discussions. It seem to work for me so try deleting that smart album and create a new one. See if that will work. Also deleting the iPhoto cache folder from your User/Library/Caches folder might help.
    Also using all caps is difficult to read and is tantamount to shouting in the forums. It's much easier to read when in lower case. Thanks.
    Do you Twango?

  • Organizing images for a photo album (to be printed) not working as expected

    I am trying to create a group of selects from a vacation from which I will print 40 non-snorkeling photos to put in a physical photo album. Here’s what I’m doing:
    Created project Hawaii, imported about 400 images.
    Created keywords "Hawaii", “Snorkeling Trip” and “Everything Else”
    Created Smart Album “Land and Air” with keywords “Hawaii” and “Everything Else”
    Created Smart Album “Snorkeling Trip” with keywords “Hawaii” and “Snorkeling Trip”
    Created empty Album “Photo Album”
    At this point I have about 400 images in the project Hawaii, 350 in Smart Album “Land and Air” and 50 in Smart Album “Snorkeling Trip”. So far everything is working as expected.
    Next I selected the Smart Album “Land and Air”, switched to the Ratings & Keywords view, walked through all images and found 40 to rate 5-stars. I also cropped and made some adjustments.
    Next I re-arranged these 40 selects to an order that better depicts a story. Note: At this point the sort field indicates “Custom” as expected.
    Next I dragged these 40 selects into empty Album “Photo Album”. This is where the problems begin:
    In the Album "Photo Album", the sort order changed to “Image Date” and “Custom” is now grayed out. I can not change the order of the images.
    All of these images are “- version 2”. If I click on the Smart Album “Land and Air” these 40 “- version 2” images appear there, too, in addition to the ones that are already there. I.E. There are 40 more images in “Land and Air”, 40 of the original images and 40 of “- version 2”. Interestingly, the originals and “- version 2” images are identical – they are both cropped and adjusted.
    I’m confused as to why there are “- version 2” images when they are the same (with crops and adjustments) as version "1”. What I expected was to just have the 40 images I selected out and arranged in the Album “Photo Album” and the original 40 in Smart Album “Land and Air” not duplicated and would (or perhaps would not?) reflect the crops and adjustments, and keywording.
    How should I be doing this? What am I doing wrong?

    Beardheart wrote:
    The problem is that when I open a new project and try to use that loop, the loop doesn't appear in the loop browser.
    http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops ?
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    I assumed a loop added to the library would be available for all users
    no, only the user that created it
    and all projects,
    see the first link
    if I could just export this loop as a wav file
    GB only exports AIFF, AAC, and mp3, however you can convert them to a wav if you need to:
    http://www.bulletsandbones.com/GB/GBFAQ.html#converttowav
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    to the desktop or something and then pull it into the new project, but I can't find any way to do that.
    export the part you want:
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    and import that:
    http://www.bulletsandbones.com/GB/GBFAQ.html#importaudio
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    I looked under /Library/Audio/Apple Loops/Apple/Apple Loops for Garageband {...} and that folder is full of loops, but not the one I have created.
    http://www.bulletsandbones.com/GB/GBFAQ.html#myloopsstored
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I just imported 70 photos successfully, edited them, and then attempted to upload them to a Facebook album.  It did not work and got hung up, so I force quit IPhoto and was going to try again.  The 70 photos have DISAPPEARED!!  Help !!!!

    I just imported 70 photos successfully, edited them, and then attempted to upload them to a Facebook album.  It did not work and got hung up, so I force quit IPhoto and was going to try again.  The 70 photos have DISAPPEARED!!  Help !!!!

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

    Hi Expert,
    I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working. 
    I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
    Wish to hear goods news ASAP .
    Thank you.
    Joan.

    Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
    Value Date code in the above abap
            IF PAR_VALD = 'X'.
              MOVE C2-VALDT TO HLP_VALDT.  "  VALUE DATE
             write hlp_valdt to umsatz-budat dd/mm/yy.
            ELSE.
              MOVE C8-BALDT TO HLP_BALDT.
              MOVE HLP_BALDT TO HLP_VALDT.
            write hlp_valdt to umsatz-budat dd/mm/yy.
            ENDIF.
               MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
               MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
               MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
    Regards
    Anurag
    Message was edited by: Anurag Bankley

  • The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    Hi there,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Additionally, you may want to try completely disabling and re-enabling restrictions.
    -Griff W.

  • Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Are you in an area where there is no coverage?
    You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't help, then yOu'll need to contact Sprint again.

  • HT1976 my cellular data is not working , how do i fix it

    my cellular data is not working
    when i turn it on it doesnt show
    but ym wirless network works
    i need help.
    thanks

    My cellular data stopped working when i update my iphone 5c to ios7.1 any help please

  • Aperture:  photos not importing in numerical order with Smart Album recently, Aperture:  photos not importing in numerical order with Smart Album recently

    Aperture 2.1.4 has imported my digital photos numerically in Smart Albums perfectly till just recently.  Can anyone tell me what is happening?  Thank you.

    The only thing worked was when I created a new Aperture library with only the projects I want. This brough me to think it maybe something to do with the size of my current library, which currently host over 10,000 photos, or there is something else wrong with my library?
    Aperture is designed for really big libraries, so the size should not matter. But since you can sync a new library, I suspect, that your Aperture library may need repairing. Did you have an Aperture crash, that may have left your library in an inconsistent state?
    Try the Aperture Library First Aid Tools on your main library: You can launch the "Library First Aid" by holding down the ⌥⌘-combination, when launching Aperture, see:
    Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
    Regards
    Léonie

  • Subscribed Google Calendar not working

    I have set up my google calendar via CalDav and that's working great. But I also need to subscribe to my boyfriends google calendar, just to view what is there. So I have updated to 3.0 and I go into Settings -> Mail, Contacts, Calendars -> Add Account -> Other -> Add Subscribed Calender
    I put in the address that google gives me to the .ics file for his private calendar. The it says "subscribed calendar account verification failed".
    Anyone else have this problem? And have you been able to fix it?

    I have not been able to get the google subscribed calendars to work either. I was able to connect my main google calendar via CalDAV, but you can't add additional CalDAV accounts. Subcriptions are not working at all. I get this error message every time: "subscribed calendar account verification failed"
    The method you describe here may work, but you won't actually get any updates because you have basically subscribed to a copy of the calendar, not the actual calendar that the original creator presumably keeps upto date.

  • My phone is so slow won't download any apps and data is not working correctly

    I have the moto e with straight talk

    Hi
    This is not a Firefox thing, but there are some general housekeeping activities you can do to make your telephone run much easier.
    First of all, uninstall any apps and widgets you do not need. It is amazing how they can clutter up your phone! In the app drawer, long press on an app or widget and drag it to the uninstall option at the top of the screen.
    So you have a sizeable SD card in your phone? If so, in Settings app , scroll down to Storage and tap "Move media". As it says on the menu, this will move your media files to your memory card, thus freeing up space on your phone.
    Before you leave Storage, scroll up a little and tap on "Cached Data" and selected to clear the cached data.
    In Settings>Apps, scroll across to "On SD Card" and tick a few boxes to move some of your apps to your memory card. (Note: With some apps, this may mean that any accompanying widgets will not work, this is a bug with Android).
    Once finished, turn off your phone and turn it back on again and you should find your phone has quite a bit more space and is running a bit quicker.

  • Help for date field not working after upgrade

    hi experts,
    In our BSP application for a page we had an inputfield (date).
    Onvaluehelp for input field we were calling the saphelpdate function.
    however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
    we have upgraded to SPS 16 recently.
    please help me.
    regards,
    Arvind.

    Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
    DATA: BEGIN OF T_PCONT OCCURS 0,
          PCONT LIKE ZPSPERMISOS-PSOBKEY,
    END OF T_PCONT.
    DATA: BEGIN OF T_FIELDS OCCURS 0.
            INCLUDE STRUCTURE help_value.
    DATA END OF T_FIELDS.
    DATA: BEGIN OF T_VALUES OCCURS 0,
          VALUE(60) TYPE c.
    DATA: END OF T_VALUES.
    DATA: N TYPE i.
    SELECTION-SCREEN BEGIN OF BLOCK  b20 WITH FRAME TITLE text-b02.
      SELECT-OPTIONS:
        P_CONT FOR  ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
        P_INT  FOR  ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
        P_FEC  FOR  ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,    
        P_RAZ  FOR  ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK b20.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
      PERFORM P_HELP_P_CONT USING P_CONT-LOW.
    *&      Form  P_HELP_P_CONT
    FORM P_HELP_P_CONT  USING P_P_CONT.
      DESCRIBE TABLE T_PCONT LINES N.
      IF N EQ 0.
        T_FIELDS-FIELDNAME  = 'PSOBKEY'.
        T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
        T_FIELDS-SELECTFLAG = 'X'.
        APPEND T_FIELDS.
        CLEAR T_FIELDS.
        SELECT PSOBKEY FROM ZPSPERMISOS
        INTO  TABLE T_PCONT.
        SORT T_PCONT BY PCONT.
      CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
        EXPORTING
          CUCOL        = 10
          CUROW        = 1
          TABNAME      = 'T_PCONT'
          FIELDNAME    = 'PCONT'
        IMPORTING
          SELECT_VALUE = P_P_CONT
        TABLES
          FIELDS       = T_FIELDS
          VALUETAB     = T_VALUES.
    ENDFORM.                    " P_HELP_P_CONT
    Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
    Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

  • Date comparision not working in BI-Publisher in one scenario.

    Hi,
    Iam using sqlquery as a datamodel for BI-Publisher report. I have a requirement that the input parameters startdate and endate are Date types. When the user enters startdate and enddate and clicks on view, the report should show data which falls in between those dates.
    Here is the sample query i used.
    select * from
    table1
    where begintime >= :p_StartDate and begintime <=:p_EndDate
    Here begintime is a timestamp and p_StartDate and p_EndDate are just dates. So when comparing begintime with p_StartDate/p_EndDate, i guess its taking default time from that date and because of that the comparision is failing in 1 case. i.e, In the above query, though the comparision operator is >= or <= , ultimately > or < is getting effective. So to acheive the actual result, I need to give one day more for start and end dates.
    However I found a way to acheive this without adding extra day to both the dates. Here it is :
    select * from table1 where
    ( begintime >= to_timestamp(to_char(:p_StartDate) || '00 00 00', 'DD Mon YYYY HH24 MI SS')) and
    ( begintime <= to_timestamp(to_char(:p_EndDate) || '23 59 59', 'DD Mon YYYY HH24 MI SS'))
    But the above is working in sqleditor like jdeveloper database navigator. But not working in BI-Publisher.
    BI-Publisher is throwing error saying
    "ORA-01830: date format picture ends before converting entire input string"
    Please help as to how to go about this problem or any alternative solution.
    Thanks & Regards,
    -Vijay-

    Hi,
    I think it will be fine to trunc the begin time since :p_StartDate and p_EndDate are just dates without time stamp
    i.e:
    select * from
    table1
    where trunc(begintime) >= :p_StartDate and trunc(begintime) <=:p_EndDate;
    any problem with this.Please share the thought.
    Best Regards,
    mahi

  • Global Data Plan not working in the Netherlands

    I called customer service a week before my trip and arranged for the $30 "Global Data" plan to begin April 1. I have been unable to get a data connection here in the Netherlands and e-mails to customer service have gone unanswered. I cannot see anything on my account to indicate whether this has ever been activated.
    By poking around the settings and setting the data networks to GSM I've been able to see Vodophone, T-Mobile, and KPN listed, but if I try to connect to any of them I get an error that indicates I cannot connect to them.
    Can anyone provide some advice on how to get this working? I was really relying on this to help with getting info on places to visit and it's proving a pretty difficult trip when having to rely on free wifi spots to make up for this.

        roninacolyte,
    Greetings from the states! To be honest, the Thunderbolt will not work in Hong Kong. You can check out our trip planner for future reference at http://vz.to/n9PFe9
    EvanO_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for