Smart Album problem: Camera Model photos not showing

I have owned the iphone 1,3g,3gs and now 4s and all 3 ipads...
I at one point had a smart album created for each phone or ipad to be able to sort them by which device i took the photo on.
My ipad 2 and iphone 3g and 3gs photo's now show empty in the smart album, although i still have all the photo's in my library.
can someone help? thanks!

i tried that and didn't work. i wound up finding the post about repairing the library and that did the trick. Thanks!

Similar Messages

  • Smart Album, and camera model?

    My older camera Pentax K10D, no problem for the Photos Smart Album to find all pictures taken with that camera "Pentax K10D".
    But when i have seen the picture info in picture (cmd+i) has the text "PENTAX K-5" and when i put that criteria in a Smart album (-as i have done with my Pentax K10D Smart Album) the "PENTAX K-5", Photos cant find a singel picture taken with "PENTAX K-5" info.
    So i think the "Smart Album" is a little bit broken...?

    thanx :-)
    Yes, notice it after i put this support-help on apple suport site, but anyhow Smart Album is a little bit broken and they should fix that little bug.
    And yes it works better with "K-5" than "Pentax K-5" that is the original-name in picture info, on import.
    Anyhow thanx for the answer and Photos is more likable every time i use it, it will most likely be a good "PRO" -picture editor at the end :-)

  • Non iPhone camera app photos not showing up in iPhoto

    When I connect my iPhone 4 to my MacBook, iPhoto only shows thumbnails of photos taken with the camera app.
    Thumbnails taken with a third party app show up as empty hash border boxes and I am not able to import them. Why is this? It's dam annoying. I should be able to get hold of any images on my iPhone regardless of what app I used.
    (Note photos are always stored on the iPhone in the Photo Gallery)

    It's a bug, I think. Many people have reported it on the iPhoto forum, so you might search for a solution there.
    See if Image Capture in your Applications folder lets you download all the photos to your hard drive. Worst-case, copy and paste them into an email to send yourself.
    To tell Apple:
    http://apple.com/feedback

  • HELP! My iphone camera roll photos not showing in Mac OSX!

    Hi,
    My iphone (and ipod touch) are not recognized as having fphotos on them...even if they show in the device.
    This is a new problem for me and already tried some fixeds that...didn't work.
    The phone is taking pics...everything seems fine but...no pictures showing in macOSX in any program!
    Please help me!
    Paulo

    Only registered developers have access to GM 4.0, so as a registered developer you have access to the developer forums where your question should be posted. If you're not a registered developer, you'll just have to wait until OS 4 is officially released to see if your problem is fixed.

  • Smart Album problem

    Hello!
    I thought to have a smart idea - namely to use "Smart Albums" in order to separate the pictures I shot with my different cameras. But for some reason I didn't get it to work correctly:
    When I make a new Smart Album with 'Camera Model is" ... i.e. my new A620, the album does NOT contain all the pictures taken with it. Same when I set "File Name starts with" ... IMG for example, does not contain all the appropriate pictures, etc.
    Odd: The only Smart Album I got working is one with the condition ""File Name starts with" DSC" - it separates the pictures taken with my SE K750i handycam, as they start with this letters. Odd because iPhoto doesn't show this camera name in it's list when creating the Smart Album.
    Thanks for hints!
    Donat
    G4 1.25 Dual, 2 GB   Mac OS X (10.4.5)   Canon A620

    Hi Glen
    I tried your suggestion: the result is about the same. I.e. when I search for "Filename starts with 'IMG'" the result shows me only some of the appropriate pics but not all - although they are all in the same iPhoto library and even shot with the same camera around the same time.
    Could it be that the iPhoto library got somewhat corrupted? If - how could I "de-corrupt" it?
    Donat
    G4 1.25 Dual, 2 GB   Mac OS X (10.4.5)  
    Message was edited by: Donat Roth

  • Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Have you enabled "Save incoming Media"
    in your whastapp\Setting\Chat setting\Save Incoming Media?

  • Just downloaded iOS 5 update to my iPhone4. One new feature is ability to access photo app from lock screen by tapping "camera" icon. Camera icon does not show up on my lock screen. Help?

    Just downloaded iOS 5 update to my iPhone4. One new feature is ability to access photo app directly from lock screen by tapping "camera" icon. Camera icon does not show up on my lock screen. Help?

    Press the home button once to wake the phone into lock mode.  Then press it twice while in lock screen and you will see camera button to right of slide.

  • Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    WOOHOO!!! i finaly fixed the problem. Here is what to do:
    Chances are if you did the same thing as me you either have
    A) No album names at all for ALL your songs in your library
    or
    B) Have the same name for every album for ALL your songs in your library.
    Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
    Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
    Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
    Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
    For some reason having the same album name for all your songs messes up the organization of the iPod.
    Hope this helps anyone else that is having the same problem

  • Photoshop elements 12 photos not showing in edit bin

    I am having problems with photos not showing up in photoshop elements 12 bin. I can select the photo and when I press the edit with photo elements editor still nothing. I tried resetting, redueing everything etc. Still nothing. Also likes to freeze can someone please help me get this to work. I had this set up for months where it worked and now it is not doing andything at all. Not sure why

    What happens when you open the file by going to:
    File >> Open
    You do this by first launching the PSE Editor and then going to:
    File >> Open
    Please post back.

  • Camera attributes do not show (sometimes​)

    I am aiming to configure a webcam (Trus Exis) so that the camera attributes can be configured in labview. This followed in a program (see attatched), however it sometimes does not work (camera attributes return empty and cannot be written). I am not totally sure of the problem as it appears quiet random, however after playing around a bit it appeared that it works better if I quickly stop and then start the vi again. To test this I placed the vi in a while loop and added a wait function. If this wait is 10ms the defect disappears, at 1sec it works about half the iterations, and at 10sec it occasionally works.
    One thing I also noticed is that in IMAQdx Configure Grab VI the check if session in exists always returns true (so path isn't found) and the standard path (cam0) is sent. Now however, this is the same path that is inputted. So I suspect this might be a couse of the problem too.
    Anyone have any ideas on how to solve this? Help is greatly appriciated.
    Attachments:
    test01.vi ‏58 KB

    Hello ThiCop,
    Thanks for your reaction, in The max it is showing that the camera connection is DirectShow. I have rebooted my pc so I could give you a clean MAX report (plugged in webcam after windows booted). This is the ni_support.zip. Here all camera Attributes show and can be edited at will (I think this is the sometimes that my program does work). Then I closed the MAX and reopened it (you could see it check for the webcam again and it was found again) this is the second report, here the camera attributes do not show.
    I tried opening your reccomended vi to test it but as I have labview 9.0 (student edition) I was unable to open it. I have however used the NI examble Grab and basic attributes.vi and here it worked after rebooting the pc. Stopping and restarting the program makes the vi stop being able to edit the attributes (still getting image though). As said before I suspect it might have something to do with time between starting and stopping the VI. If I place a grab and read attribute configuration in a while loop (so that the camera is configured and stopped multiple times) it appears that with a short wait (so a short time betueen the stopping and restarting) it works more often then with a long wait. Here the long wait still shows a immage if the attributes are not shown.
    Although it might seem like a strange problem I hope you can help me further. Just ask for more info if I have not suppied enough.
    Thanks in advance
    Attachments:
    ni_support.zip ‏371 KB
    ni_support2.zip ‏370 KB

  • Photos not showing on Apple TV

    What reson would there be for some photos not showing in apple TV?
    Ta

    Yes, tried that but all that happened was that my Home Sharing although shown turned on on both Apple TV and iTunes did not allow me to connect to my Library, could access You Tube so WiFi connection O.K.. Tried switching Home Sharing off and then on again on Apple TV but that didn't access my Library so had to go back into iTunes on my Mac and switch off Home Sharing and switch it back on again there which then allowed me access to my Library. This resolved the problem as photos I had just taken were now viewable ( This however has happened before so not a new problem, suspect the router but as I am changing ISP soon, going to BT Infinity, hope that will solve that problem.)
    Message was edited by: brijanhub

  • My iphone problem is network bar not show for searching why how can resolved my iphone

    my iphone problem is network bar not show for searching why how can resolved my iphone
    my iphone model is MD239B/A
    my iphone serial no: DQ******TD2
    <Edited by Host>

    Hi mirza_ali,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    iOS: Understanding cellular data networks
    iPhone: Wireless carrier support and features
    I hope this information helps ....
    Have a great day!
    - Judy

  • Camera new d810 not showing pix up in raw files in elements 11

    camera new d810 not showing pix up in raw files in elements 11 and lightroom 4

    DNGC 8.7 can be found, here:  http://www.adobe.com/downloads/updates/
    You can purchase upgrades to LR and/or PSE, here:
    http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html

  • My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    Double Click home button, then tap the camera icon next to the slide to unlock.

  • My Photo Not Showing Up in Messages

    My photo does not show beside my texts in Messages on my Mac. Only a shadow of a generic person in a rectangle is there. I can see the photos of others who write me, though. I have my photo in Contacts and it does show up in Mail, but not in Messages. My photo also shows up in IMessage on the iPad.
    Why is my photo not showing up in Messages and how could I make it visible? Thanks.

    HI,
    Your Pic is set if you have  Buddy list set up/logged in.
    Enable the Bonjour account if you do not have Jabber, AIM or Yahoo IDs set up in Messages.
    Click on the current Buddy Pic.
    You may find it has pulled the Pic from the My Card in the Contacts app (Formerly the Address Book)
    In turn this may be picking up on the System Preferences > User and Groups > your account Login pic.
    That is to say when you set up the (Mac User) Account it asked you to create/chose a pic from the Login Screen.
    Later the process of setting up an Accounts asked for details that create the Contacts/Address Book Card  and the Login in pic is dragged across.
    AS you then get to set up Messages (Or iChat) then the My Card pic is pulled through.
    All three spots can be changed independently of each other.
    Some of the Recent Items can be from either of the others.
    This is my Buddy list pic and th "Recents" I have.
    The Zebra and head in "teeth" pics are from some testing I did with Pics in the Contacts > My Card options rather than Messages.
    Finally once you have a pic linked to Messages then it also show up at your end for the Chat window for iMessages (as well as for you in AIM or Jabber)
    NOTE
    In AIM and Jabber (Or Yahoo) your Pic is Broadcast and is what you Buddy sees next to your Name (They can override this though)
    In iMessages though your pic is not sent and your Buddy's Contacts app supplies whatever pic they have for you. (As yours does for them)
    9:10 PM      Saturday; December 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem

    I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from

  • Invoice and Accounting Number ranges

    Hi, I have a requirement where the invoice number and the accounting document number should be same. Ie: If I generate an invoice with number 101. The same number should be populated for the accounting document as well. Regards, Sam

  • Why can't I open a book in itunes on my Mac (Snow Leopar) that I purchased from my iPad?

    Why can't I open a book in itunes on my Mac Book Pro (Snow Leopard) that I purchased from my iPad?

  • Error named like "CONVERSION ERROR"

    I am creating one Module Pool Program with the Screen Painter. There is total 10 Tab Strips used in the Screen Painter. When I select the Last Tab, I get the Error with the message " CONVERSION ERROR" Can you guide me why this error can occurs?

  • Swing link

    Hi How can i create a HTML Link in a label?? I would like that the standard browser open with this link. I know that i can add a html text to the label. but how make i realise the action when i click at the link.