Smart Build Bug? Reflections/Shadows missing from newly added graphics

So, you create a smart build - I have seen this with both dissolve and turntable - with say 5 images in it. You apply a shadow and reflection. I know, overused, but that's for a different forum.
You then add a new graphic to the build - anywhere. That graphic will not have reflection or shadow, even though the inspector says it does.
The work around that works but is annoying is to select the smart build, remove the reflection and shadow and then add it back. All the images now have the reflection.
This is keynote 4.01

I just tried the same thing and it does appear to be a bug. I was thinking initially that Keynote was allowing you to set them up individually, but, nope. Be sure to send feedback!
http://www.apple.com/feedback/keynote.html

Similar Messages

  • Photos missing from Recently Added, Collections after IOS8 update

    After I uptaded my IPad Air to IOS 8, photos were missing from Recently Added and Collections. (I understand Camera Roll and Photo Stream are gone.) My Recently Added photos dated to June (it's September) and my shared IPhone photos were missing from both the Collections/Moments where everything is supposed to be  now. Photos In Last Import are also from June. I was fumbling through the Comminties threads and found a partial solution on a related IPhone thread. I can't figure out how to link to it, but someone called Apple tech and they suggested going to Settings/Photos & Camera and toggling My Photo Stream off and then on again. I was reluctant to do this since a pop-up warns that all photos in your stream will be deleted. But as soon as I did it, aphotos started downloading to the Recently Added. They're out of chronological order, and there are duplicates, but at least they haven't all disappeared. (Also, not w complaint, but my Recently Added goes back to 2011, not 30 days.) Photos are still missing from Last Import and Collections. Any other ideas? At least now this feels recoverable, I'll put everything in Albums quick.

    Hi Lizka_2,
    It sounds like you may be having some issues finding your Photos after you have updated to iOS 8. Try using the information in the following article to help you resolve this issue:
    Get help finding your Photos in iOS 8
    http://support.apple.com/kb/HT6464
    Where can I see all of my photos and videos?
    Tap Photos to see your photos and videos in Moments, Collections, and Years.
    Get more help
    If you don't see your photos and videos in the Photos tab of the Photos app organized by Moments, Collections, and Years or in the Recently Added album, contact Apple Support.
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Creating New Smart Playlist by Album name - Missing From Drop Down List

    I hope i'm not the only person with this issue but since upgrading to Windows Vista i have noticed a very annoying little bug with iTunes.
    When trying to create a Smart Playlist there is no longer the option from the dropdown list to create a smartplaylist using the perameter 'Album'.
    Any lists created when my PC was using XP still have the correct parameters in place but you cannot create any ne ones.
    I have tried creating a new library without success. If i revert back to XP there is no problem.
    Are Apple aware of this issue? If not, how do i contact them to report this bug?

    ... how do i contact them to report this bug?
    Submit the form at the bottom of this page .

  • BUG? rdtimgr missing from GCCFSS 4.2.0

    The two following symbolic links are provided in the SUNWgccfss.tar.bz2 file
    lrwxrwxrwx 120/10 40 Jul 1 22:15 2008 gcc/bin/rdtimgr symbolic link to ../../SUNW0scgfss/4.2.0/prod/bin/rdtimgr
    lrwxrwxrwx 120/10 50 Jul 1 22:15 2008 gcc/man/man1/rdtimgr.1 symbolic link to ../../../SUNW0scgfss/4.2.0/prod/man/man1/rdtimgr.1
    but the files they point to are NOT included in the SUNWscgfss.tar.bz2 file.
    These files DO appear to be included in the GCCFSS 4.0.3 version I had previously. I don't know if they are missing, or the symbolic links aren't supposed to be there. I don't know what rdtimgr does, and I haven't had any problems related to this issue.
    Just an FYI.

    Thank you for reporting this. The links are not supposed to be there. We will fix it. rdtimgr was a prototype we had in there for experimenting.
    Prashanth

  • Unable to open form from newly added node error :FRM-40010

    Hi
    EBS Version : 11.5.10.2
    OS : AIX 5.3
    Database Level : 9.2.0.8
    I Recently added additional web node to existing 2 node Instance.i am getting error FRM-40010 while i am trying to access form from additional web node.
    Thanks
    Witj Regards
    A-Z

    Hi;
    Please check apache log file for details.
    Also see:
    Troubleshooting FRM-40010 Cannot read form [ID 1012300.6]
    Login in EBS Defaults To client regional language and result in FRM-40010 when starting forms [ID 786993.1]
    Frm-40010 Error when Trying to Log into Applications [ID 395447.1]
    Regard
    Helios

  • New bug introduced with Keynote 5.2 - Set timing and order of each build has stopped working properly on Smart Builds

    Hi there,
    We're heavy users of Keynote and have noticed a new bug has recently been introduced into something that was stable. I think it has emerged in Keynote 5.2, could have been Keynote 5.1 also.
    It's in the area of Set Timing and Order of each build when used on a Smartbuild. You can no longer set the Start Build field for each instance within the Smart build when the instances are interspersed between other items. The Start build field is just blank and unselectable.
    To see this :
    1. Create a bullet point list with 4 lines
    2. Set build to Appear
    3. Set "Set Timing and Order of each Build" to on
    4. Create a Smart Build - set to flip
    5. On the Smart Build Set "Set Timing and Order of each Build" to on
    5. re-order the items in your Build Order so that they alternate between the bullet point and the smart build flip
    At this point, you used to be able to set the bullets so that they Started on Click and then set the smart builds to Start with previous. This gave you a nice and very useful effect where you could click to reveal a bullet point and at the same time flip in a corresponding image. We've used this loads of times in our company presentations.
    With a recent keynote update ( I think 5.2 maybe, could have been 5.1) this functinality has been lost. have tried it on Lion and Mountain Lion and it's not an OS issue, its a Keynote issue.
    Could anyone from Apple acknowledge that they know the issue and suggest if it will get fixed? Right now we're hunting round for an old Keynote 9 DVD so we can install a pre build 5.2 version.
    Thanks

    Hi glennelliott72,
    I've noticed the bug you describe and to me it's very irritating.
    I also found some differences in the build menu between the last release and the previous one, and between the Mac OS X and iOS versions. For instance, the blast build doesn't exist anymore in Keynote 5.2 but it's still in the version for iOS 6.
    What is your experience about?
    I currently use OX Lion.
    Thank you

  • Android Notification Icon Missing From Captive Build

    Hey all,
    We've finished development on an iOS & Android game which shaped up to a rather nice result thanks to the great SDKs available to us from Adobe
    And after breaking our heads on implementing a cross-platform NativeExtension for push notifications, we managed to set it all up and get everything connected, running on production servers. We'll do a write-up about that later because documentation on that subject is rather lacking and people who succeeded are somewhat tight-lipped about their solutions.
    There's just one thing that's bugging us: the notification icon for Android seems to be missing from the captive build (we're using AIR SDK 3.1) and defaults back to an Adobe AIR logo. This behavior is not seen when building a normal APK file, which makes me think this is something we have no control over and might possibly be a bug in adt.
    We've found only one other post on the web about this particular problem:
    "Just one small issue though, with flex 4.6 if an app is packaged with the captive Air Runtime, the icon that displays for notifications is the adobe air icon and not the application’s own icon." - http://www.riaspace.com/2011/09/as3c2dm-air-native-extension-to-push-notifications-with-c2 dm/
    Thanks in advance!

    Could you please open a new bug report on this over at https://bugbase.adobe.com?  When adding the bug, please include your sample code or a sample application so we can quickly test this out internally.
    Once added, please post back with the URL so that others effected can add their comments and votes.  I'll also give the mobile team a heads up. 
    Thanks
    -Bo

  • Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?

    Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?

    If Nancy's advice doesn't make it pop up as a window, you may have it set as a tool bar, in which case, hitting Ctrl+F2 will make the tool bar appear/disappear.
    To turn it back into a floating panel, click and drag the dashed line on the far left of the Insert tool bar and pull it away from the top. You can leave it as free floating or drag it to another edge until it highlights the edge and drop it to dock it to whichever side of the screen you prefer.

  • Hi, My brush tool is missing from the icons on photoshop 10, I only have Smart Brush Tool

    Hi,
         My Brush Tool is missing from the icons on Photoshop 10, I only have the Smart Tool Brush. Where has it gone?

    Many of the tools have multiple choices - simply right-click on an icon or for the brush tool keep pressing the letter B to tab through the choices.

  • Keynote Smart Build gallery is missing

    I am trying to edit images in a Keynote Smart Build. I have done this numerous times previously but now the drag-and-drop gallery is missing so I can't rearrange or delete images. Is there any way to get the gallery box back?

    Gael, What did you have to do to bring back the Smart Build drag-and-drop gallery? 
    If your plea to Apple is about the changes to Keynote in the new version (6.0) that was released with Mavericks, you might want to also submit your feedback to Apple here:
    http://www.apple.com/feedback/keynote.html.
    Dale

  • Remove background from Smart Build images

    Hi,
    I've just started creating my first project with Keynote, and so far it's terrific. The question I have is, is it possible to use the alpha tool, or something similar to remove backgrounds from images that I'm using for a smart builds effect.
    Thanks,
    Dave

    Welcome to the discussions, Decaffeinated1.
    The problem you're seeing is specifically with how Keynote copies images. Neither Pages nor Numbers has this problem. The problem and the solution is described here.
    http://www.keynoteuser.com/news/?p=256
    Basically, your choice is to copy through Pages or Numbers (or iWeb) OR to copy another object which will force Keynote to adhere to the transparency set with Instant Alpha.

  • Smart build editor is missing

    For some reason whenever I add a smart build and insert a couple of images from my media library I'm unable to get the smart build editor to show when I click inside the blue box (in fact click anywhere). Any suggestions?

    I had this problem and solved it by going to
    Users/youraccountname/Library/Preferences/
    and then doing a search for "keynote" limiting results to this directory only. There were 5 .plist files that I moved to the trash. This resets keynote so if you have changed any preferences in the application, you will have to change them back after doing this. You won't have to reenter the activation code.

  • Newly Added Topics Missing From steve o'hearn Exam Guide (1Z0-047)

    Hi,
    I am planning to take exam 1Z0-047.
    I got to se the exam guide for this,(OCA Oracle Database SQL Certified Expert Exam Guide (Exam 1Z0-047)) by Steve o'hearn in market.
    But it seems that syllabus of the exam is modified on 15th september 2014; and newly added topics are NOT present in the exam guide.
    Below are the objectives and topics I feel are missing from the book.
    Restricting and Sorting Data
    Use the SQL row limiting clause**
    Create queries using the PIVOT and UNPIVOT clause**
    Use pattern matching to recognize patterns across multiple rows in a table**
    Displaying Data from Multiple Tables
    Use the cross_outer_apply_clause**
    Using Subqueries to Solve Queries
    Create a lateral inline view in a query**
    Using DDL Statements to Create and Manage Tables
    Truncate tables, and recursively truncate child tables**
    Use 12c enhancements to the DEFAULT clause, invisible columns, virtual columns and identity columns in table creation/alteration**
    Manipulating Large Data Sets
    Use explicit default values in INSERT and UPDATE statements**
    We can find material on these topicsover internet(in fact I have actually worked on few of these topics already as part of my job.)
    But i prefer referring to book as it helps to understand the scope.
    I just joined the oracle forums,and not sure if I am placing this discussion on correct forum/category.
    A humble request to advice if it is at wroing place.

    I am just thinking what next course should I take ?
    Immediate target will be obviously  some PL SQL related test like 1Z0-147.
    BUT what to do after that ?
    In my work experinece so far, I have worked as a developer, senior developer(mainly in maintenace projects , both OLTP and OLAP projects I have worked for.
    that is, small as well as relatively big data volumes.Right from simple DB to DW systems of big enterprise corporation where millions of transactions happen and enter into system each day). I have  also participated in database designing when I worked on project where database was being designed from scratch. so, I am aiming/aspiring for a role something like Designer  or architect roles in the long run.
    I'm glad you found my page useful. I actually recommend 1Z0-144 over 1Z0-147.  The two exams are equivalent in their results, but I feel 144 is the better exam.  Also, 147 was almost retired at one point.  OU backed off, but may put it back on the chopping block at any time.  I wrote an article explaining why I prefer 144 here:
    Oracle PL/SQL Developer Certification: 1Z0-147 or 1Z0-144?
    As to the step after that, 1Z0-146 is the obvious one to gain the PL/SQL OCP.  147/144 will only gain the OCA-level cert.
    If you want to end up as a designer or architect, eventually you must get into database design, which would argue pursuing the DBA track.
    Millions of transactions implies a significant requirement for performance tuning which would argue for the SQL Tuning (1Z0-117) or performance certifications (1Z0-054/1Z0-064).

  • [svn] 3151: Fix for bug SDK-16761 - Method parameters missing from generated document

    Revision: 3151
    Author: [email protected]
    Date: 2008-09-08 21:30:07 -0700 (Mon, 08 Sep 2008)
    Log Message:
    Fix for bug SDK-16761 - Method parameters missing from generated document
    Bugs: SDK-16761
    QA: Yes
    Doc:
    Tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16761
    http://bugs.adobe.com/jira/browse/SDK-16761
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    Hi,
    Can you try putting the declaration of the URLLoader instance
    outside your fetchISSN function and see?
    That is:
    var loader;
    function fetchISSN(myform) {
    //your code above this line
    loader = new URLLoader();
    //rest of your code

  • Bug Report: fck_link.html missing from apex download distro

    Hello folks,
    I'm using the "Starndard HTML Editor" item in Apex 3.0
    I'm trying to edit a link in the body of the item textarea. The pop-up does come up but I get the following error inside the window:
    Not Found
    The requested URL /i/fck/editor/dialog/fck_link.html was not found on this server.
    I double checked original apex download (apex_3.0.zip) and this file seems to be missing from the source.
    Can anyone please attach this file so users can download?
    Thanks a lot.
    -Alex

    Hello folks,
    I'm using the "Starndard HTML Editor" item in Apex 3.0
    I'm trying to edit a link in the body of the item textarea. The pop-up does come up but I get the following error inside the window:
    Not Found
    The requested URL /i/fck/editor/dialog/fck_link.html was not found on this server.
    I double checked original apex download (apex_3.0.zip) and this file seems to be missing from the source.
    Can anyone please attach this file so users can download?
    Thanks a lot.
    -Alex

Maybe you are looking for