Smart Camera gets Restart When it is put in inspection inface mode, why ?

Hi,
why smart camera gets Reboot when it is put in Inspection Interface mode from configure Inface Mode.?
Brijesh Patel
CLAD
Labiew programmer

I've seen this a lot recently.  It use to show no warn you but now a messages tells you it is doing this and that it should take less than a minute.  Definitely was seeing this before I switched to VMS, and now see the VMS startup screen sometimes.
I believe that on some conditions it does the update even in Standby, but for some reason not always.

Similar Messages

  • Hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation.

  • Server0 getting restarted when i access UME configuration

    Hai experts,
    i have changed UME configuration for ABAP , and for testing the sap system I.e ( through system configuration )when i click on UME configuration tab  my server0 is getting restarted , before restart it ends with exit code 666 and starts again. i logged in through sap* to access this.
    kindly help me where to modify or any changes has to be done.
    thanks in advance..
    regards
    Arun

    std_server0
    getThreadDump : Thu Aug 27 10:08:54 2009
    FATAL: Caught OutOfMemoryError! Node will exit with exit code 666
    ================================================================================
    java.lang.OutOfMemoryError
    Full thread dump Java HotSpot(TM) Server VM (1.4.2_11-b06 mixed mode):
    "Thread-113" daemon prio=5 tid=0x05ef7118 nid=0x1c4c in Object.wait() [0x5d84f000..0x5d84fd94]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x270dffc8> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
         - locked <0x270dffc8> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
         at com.sap.engine.cache.util.ReferenceQueueRunnable.run(ReferenceQueueRunnable.java:43)
         at java.lang.Thread.run(Thread.java:534
    dev_server0
    Thu Aug 27 10:13:02 2009
    1280  !    com.sapportals.portal.prt.util.AutoClassLoader$ClassPath::_createLocation (290 bytes)
    Thu Aug 27 10:13:31 2009
    1281  !    com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService::__getTechnicalUser (66 bytes)
    1282       com.sap.security.core.srvUser.imp.ServiceUserFactory::checkForServiceUser (243 bytes)
    1283  !    com.sap.security.core.util.cache.BaseTechCacheWrapper::get (86 bytes)
    1284       java.util.Arrays$ArrayList::size (6 bytes)
    1285       java.util.Arrays$ArrayList::get (7 bytes)
    Thu Aug 27 10:13:33 2009
    1286       EDU.oswego.cs.dl.util.concurrent.ConcurrentReaderHashMap$HashIterator::nextElement (5 bytes)
    Thu Aug 27 10:13:41 2009
    1287  !    com.sapportals.portal.pcd.pl.PlAttribute::cloneKeepReadOnlyFlag (97 bytes)
    1288       com.sapportals.portal.pcd.pl.PlAttribute::clone (12 bytes)
    Thu Aug 27 10:13:45 2009
    64% !    java.lang.ref.Finalizer$FinalizerThread::run @ 0 (21 bytes)
    Thu Aug 27 10:13:50 2009
    1289       java.util.HashMap$Values::iterator (8 bytes)
    1290 s     oracle.jdbc.driver.OraclePreparedStatement::clearParameters (29 bytes)
    Thu Aug 27 10:13:51 2009
    1291       com.sap.sql.sqlparser.SQLLexer::makeToken (7 bytes)
    1292       com.sap.sql.sqlparser.CheckGroupVisitor$WhereChecker::visitColumnReference (32 bytes)
    1293  !    com.sap.engine.services.dbpool.spi.LocalTXManagedConnectionImpl::commonCleanup (84 bytes)
    1294       com.sap.engine.services.dbpool.cci.ConnectionHandle::<init> (81 bytes)
    1295       com.sapportals.portal.pcd.pl.AttributeValuesTable::readAttributeValue (662 bytes)
    1296       oracle.sql.CharacterSet::conv3ByteUTFtoUTF16 (71 bytes)
    1297       com.sapportals.portal.pcd.pl.PlFactory::getInteger (72 bytes)
    1298       oracle.sql.CharacterSet::conv2ByteUTFtoUTF16 (36 bytes)
    1299       oracle.sql.CharacterSet::isHiSurrogate (16 bytes)
    1300       oracle.jdbc.driver.T4CClobAccessor::processIndicator (156 bytes)
    1301       com.sapportals.portal.pcd.pl.PlAttribute::setInternalNoEmptyLocaleMapping (114 bytes)
    1302 s     com.sapportals.portal.pcd.pl.PlBiDirectionalCache::getObject2 (54 bytes)
    1303  !    com.sapportals.portal.pcd.pl.PlAttribute::readTextValue (102 bytes)
    1304  !    com.sapportals.portal.pcd.pl.AttributeHeadersTable::selectSubtreeObjectsAttributeHeaders (145 bytes)
    Thu Aug 27 10:13:52 2009
    1305       com.sapportals.portal.pcd.pl.PlFactory::composeAttributeString (96 bytes)
    1306       oracle.jdbc.driver.T4C8TTIClob::read (297 bytes)
    1307       com.sapportals.portal.pcd.pl.PlAttribute::setInternalNoEmptyLocaleMapping (114 bytes)
    1308       com.sapportals.portal.pcd.pl.PlLocaleCache::getLocale (118 bytes)
    1309       com.sapportals.portal.pcd.pl.PlFactory::isLazyReadLocale (40 bytes)
    1310  !    com.sapportals.portal.pcd.pl.AttributeValuesTable::selectSubtreeObjectsAttributeValues (145 bytes)
    1311       java.lang.Long::hashCode (14 bytes)
    1312       oracle.jdbc.driver.T4CTTIoer::processError (187 bytes)
    Thu Aug 27 10:13:53 2009
    1313  !    com.sapportals.portal.pcd.pl.AttributeValuesTable::selectById (91 bytes)
    1314 s     java.util.Hashtable::size (5 bytes)
    1315       java.lang.Integer::equals (29 bytes)
    1316       java.util.Hashtable$Entry::clone (41 bytes)
    1317  !    com.sapportals.portal.prt.util.AutoClassLoader::loadClassLocally (127 bytes)
    1318       com.sun.naming.internal.ResourceManager::getInitialEnvironment (131 bytes)
    Thu Aug 27 10:13:54 2009
    1319       com.sap.security.core.srvUser.imp.ServiceUserFactory::getUniqueNameMapping (36 bytes)
    Thu Aug 27 10:13:58 2009
    1320       com.sapportals.portal.prt.deployment.descriptor.ServiceList::getService (72 bytes)
    1321       com.sapportals.portal.prt.deployment.descriptor.PropertyList::load (102 bytes)
    1322       com.sapportals.portal.prt.deployment.descriptor.FilteredNodeList::getLength (17 bytes)
    Logs at the time of restart....
    Edited by: Arun Rajan on Aug 27, 2009 7:17 AM
    Edited by: Arun Rajan on Aug 27, 2009 7:19 AM
    Edited by: Arun Rajan on Aug 27, 2009 7:20 AM

  • Comp gets restart when connected to i touch

    I have i touch ios 4.1...since last week when i connect my i touch to comp,the comp gets restart.
    It happens everytime when I connect my i touch to comp.
    This happens not only with my comp but when I tried to connect it to several other computers also.
    Please,help me out as I'm not eable to add further spngs and other stuffs to my i touch through comp
    If anybody has got the solution please write here or email me at [email protected]
    Thanks

    Try a hard reset first and go from there.
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • TS1394 my Mac only restarts when I try to up-date my software, why won't it install?

    Every time I up-date my software, it says I have 11 items but when I hit the button for "install 11 items" it says "To install the updates, you must restart you computer. but it never installs the updates.

    SarahIreneSmith wrote:
    Every time I up-date my software, it says I have 11 items but when I hit the button for "install 11 items" it says "To install the updates, you must restart you computer. but it never installs the updates.
    Repair permissions and restart  your computer.  Afterwards, only install 2 items at a time.  After all the installations are done, again repair permissions and restart your computer.

  • When my iPad (ios7 ) is in portrait mode, why are there two clocks at the top?

    <a href="http://www.flickr.com/photos/97594523@N03/10405000055/" title="Ios7 no open apps, look at clocks... by staceymaehunt1, on Flickr"><img src="http://farm4.staticflickr.com/3729/10405000055_1e0f80df5f.jpg" width="375" height="500" alt="Ios7 no open apps, look at clocks..."></a>
    <a href="http://www.flickr.com/photos/97594523@N03/10405000025/" title="Ios7 ipad overlapping digital clock by staceymaehunt1, on Flickr"><img src="http://farm6.staticflickr.com/5508/10405000025_f51036c416.jpg" width="375" height="500" alt="Ios7 ipad overlapping digital clock"></a>
    Weird.
    Let me know if there is a fix to this, ;)

    Have you tried changing your background image ? It looks to me like your current background includes the time on it (it looks like it might have been a screenshot from somewhere taken at 11:45), so what you are seeing is the actual time overlaid onto the time that is part of your image - the top part of the first image in your post includes :

  • Losing smart camera connection when using web server on NI1762 smart camera

    Hi
    I am using 2 smart cameras ( old NI1762 and the new NI1772) with Vision builder 2011 . 
    I am trying to find a way to retrieve data and image to a Visual Basic 6 application. i could not find an elegant way to do it , so instead , i am sending TCP command to the smart camera as an input and the smart camera send me back a TCP command a as an output. by this way i could communicate with the smart camera . For transferring images I could not use the TCP step , so I turned on the smart camera web server to get the image by a browser Object . But the problem is that everything is going well with the TCP, but when I turned on the web server and try to communicate with it, sometimes I loose the connection with the smart camera. That is happened with the 1762 smart camera. But when I use the NI1772 it rarely happed.
    Please help me. is there any other elegant way to communicate with the smart camera , and if a TCP and web server is a solution , Why the NI1762 web server is not stable ? Why i am losing the connection when browsing to the inspection page???
    Thanx

    Previous versions of Vision Builder had a COM library that you could use from Visual Basic 6 or other environments and talk over the network to a Smart Camera running Vision Builder AI and control its execution just how you are requesting. In more recent versions, this has been replaced by a native .NET and LabVIEW-native API that is much more fully featured. Unfortunately, I do not think the older COM mechanism is still available/supported (but I certainly could be wrong...).
    However, one avenue you may wish to persue would be to call into the .NET interface from Visual Basic 6. Microsoft designed .NET to allow COM interoperibility in both directions (.NET can call into COM libraries and COM libraries can call into .NET). Take a look at the following document from Microsoft:
    http://msdn.microsoft.com/en-us/library/zsfww439(v​=vs.85).aspx
    You could then look at any of the .NET (C#) examples to get an idea of the API:
    C:\Program Files (x86)\National Instruments\Vision Builder AI 2011\API Examples\dotNET Examples
    Eric

  • Workprocess getting restarted after DB Roll back

    SAP Version : 4.7 EE
    Database : DB2 UDB
    OS : AIX
    I have an error reported by end user saying Workprocess are getting restarted when he is running a Transaction when i checked the system log and therafter the Workprocess Log I have observed the following , I have also found the heap memory is getting full and at the same time the DB is doing a rollback, can somebody explain if this is only cause of the heap memory or its Db problem over here , attached below is the Log
    Thu Feb  4 03:30:55 2010
      WP has reached abap/heaplimit = 40894464 bytes
    Thu Feb  4 03:33:20 2010
      SelMemClass: heap quota (DIA) exceeded 2000000000 2000002464
    Thu Feb  4 03:33:23 2010
      TH VERBOSE LEVEL FULL
    RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    RABAX: level LEV_RX_VMIT_CLEANUP entered.
    RABAX: level LEV_RX_VMIT_CLEANUP completed.
    RABAX: level LEV_RX_ROLLBACK entered.
    ERROR => Call to DbSlRollbackDB6 while DBIF already active in DbSlExeReadDB6*[dbsldb6.c    514]
      ***LOG BZY=> unexpected return code 1          calling DbSlRollba [dbcon#9 @ 2932] [dbcon   2932 ]
      ***LOG BYJ=> database function ROLLBACK   for connection R/3        failed [dbcon#9 @ 2935] [dbcon   2935 ]
    ERROR => DISTRIBUTED_TA_FAILED:
    [dbcon.c      1649]
      0: name = R/3, con_id = 000000000 state = ACTIVE      , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ
      ***LOG R39=> ThIRollBack, db_rollback ( 016384) [thxxhead.c   12637]
      in_ThErrHandle: 1
    ERROR => ThIRollBack: db_rollback (step 4, th_errno 18, action 2, level 1) [thxxhead.c   9723]

    Karthik,
    We hit the exact same problem when activating an APO integration model in ECC last week. It looks like an SQL statement that returns a very large result set is executed. While the result set is fetched the ABAP heap is exhausted. Since no more memory is available the ABAP engine abruptly cancels the execution and begins error handling. The database interface rejects to execute a ROLLBACK statement while the SQL statement is still active. As the rollback fails the task handler restarts the SAP work process and no ABAP short dump or job log entries can be written. We first attempting to resolve this problem by changing
    +abap/heap_area_dia + to 4GB->8GB->12GB. However, finally, the solution that worked for us was to cleanup the change pointers and reactivating the integration model with 4GB heap.
    Regards,
    Sameer

  • N91 v3.10.023 gets restarted

    My nokia N91-8gb gets restarted when i send command message like *123# (balance inquiry).
    The software version and other details are
    V 3.10.023
    19-03-07
    RM-43
    N91 (14.01)
    Thank You

    I have done same thing I also visited nokia care they have also done same thing but still I am having same problem.
    When I reset/format device software/os, it works fine for few days. But it again having same problem.
    I am software engineer I understand software/os may have not been tested very well. It may have bugs. But there should be patch or upgrade of this software that has fixed this issue.
    Let me know if there will be any release of this software.
    Thank you

  • Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going to my pics and getting it back. Does anyone know why this keeps happening??

    Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going back to my pics and getting it back.
    Does anyone know why this keeps happening??

    Are you choosing it from one of these folders (in my screenshot) or you can also put that picture into the correct folder. The path is:
    HD > Library > Desktop Pictures
    If you add it to the folder manually, please restart your computer.
    And yes, letting it sleep is a good idea, or else the startup disk will spin and the screen may suffer from image persistence if you leave a window or image parked in the same spot too long, so the screensave is a good idea.

  • [SOLVED] Duplicity getting 'stuck' when attempting to restart a backup

    Hey all,
    After a backup attempt failed partway through (first-time full backup) with this error:
    AsyncScheduler: scheduling task for asynchronous execution
    No handlers could be found for logger "paramiko.transport"
    AsyncScheduler: a previously scheduled task has failed; propagating the result immediately
    AsyncScheduler: task execution done (success: False)
    Backend error detail: Traceback (most recent call last):
    File "/usr/bin/duplicity", line 1391, in <module>
    with_tempdir(main)
    File "/usr/bin/duplicity", line 1384, in with_tempdir
    fn()
    File "/usr/bin/duplicity", line 1354, in main
    full_backup(col_stats)
    File "/usr/bin/duplicity", line 500, in full_backup
    globals.backend)
    File "/usr/bin/duplicity", line 399, in write_multivol
    (tdp, dest_filename, vol_num)))
    File "/usr/lib/python2.7/site-packages/duplicity/asyncscheduler.py", line 151, in schedule_task
    return self.__run_asynchronously(fn, params)
    File "/usr/lib/python2.7/site-packages/duplicity/asyncscheduler.py", line 215, in __run_asynchronously
    with_lock(self.__cv, wait_for_and_register_launch)
    File "/usr/lib/python2.7/site-packages/duplicity/dup_threading.py", line 100, in with_lock
    return fn()
    File "/usr/lib/python2.7/site-packages/duplicity/asyncscheduler.py", line 207, in wait_for_and_register_launch
    check_pending_failure() # raise on fail
    File "/usr/lib/python2.7/site-packages/duplicity/asyncscheduler.py", line 191, in check_pending_failure
    self.__failed_waiter()
    File "/usr/lib/python2.7/site-packages/duplicity/dup_threading.py", line 201, in caller
    value = fn()
    File "/usr/lib/python2.7/site-packages/duplicity/asyncscheduler.py", line 183, in <lambda>
    (waiter, caller) = async_split(lambda: fn(*params))
    File "/usr/bin/duplicity", line 398, in <lambda>
    async_waiters.append(io_scheduler.schedule_task(lambda tdp, dest_filename, vol_num: put(tdp, dest_filename, vol_num),
    File "/usr/bin/duplicity", line 296, in put
    backend.put(tdp, dest_filename)
    File "/usr/lib/python2.7/site-packages/duplicity/backends/sshbackend.py", line 191, in put
    raise BackendException("sftp put of %s (as %s) failed: %s" % (source_path.name,remote_filename,e))
    BackendException: sftp put of /tmp/duplicity-9_jssu-tempdir/mktemp-uqQRIn-42 (as duplicity-full.20120507T060530Z.vol41.difftar
    .gpg) failed: Server connection dropped:
    BackendException: sftp put of /tmp/duplicity-9_jssu-tempdir/mktemp-uqQRIn-42 (as duplicity-full.20120507T060530Z.vol41.difftar
    .gpg) failed: Server connection dropped:
    the process keeps getting stuck when I try to restart it. There's almost no CPU use and no useful error messages. Here's the output (the version and parameters are included) with -v debug:
    Using archive dir: /root/.cache/duplicity/1498ef4c9557164d69523e5aec4c78ce [83/4524]
    Using backup name: 1498ef4c9557164d69523e5aec4c78ce
    Import of duplicity.backends.sshbackend Succeeded
    Import of duplicity.backends.rsyncbackend Succeeded
    Import of duplicity.backends.botobackend Succeeded
    Import of duplicity.backends.webdavbackend Succeeded
    Import of duplicity.backends.hsibackend Succeeded
    Import of duplicity.backends.localbackend Succeeded
    Import of duplicity.backends.ftpsbackend Succeeded
    Import of duplicity.backends.giobackend Failed: No module named gio
    Import of duplicity.backends.ftpbackend Succeeded
    Import of duplicity.backends.cloudfilesbackend Succeeded
    Import of duplicity.backends.u1backend Succeeded
    Import of duplicity.backends.tahoebackend Succeeded
    Import of duplicity.backends.imapbackend Succeeded
    Import of duplicity.backends.gdocsbackend Succeeded
    Main action: inc
    ================================================================================
    duplicity 0.6.18 (February 29, 2012)
    Args: /usr/bin/duplicity --use-agent -vdebug --encrypt-key YYYYYYYY --sign-key XXXXXXX --full-if-older-than 60D --exclude /mn
    t/backup/bfd-training-data --exclude /mnt/backup/fsarchiver --exclude /mnt/backup/media --exclude /mnt/backup/usapparel --asyn
    chronous-upload /mnt/backup scp://[email protected]//backups/homeserver
    Linux homeserver 3.0.29-1-lts #1 SMP PREEMPT Mon Apr 23 09:41:11 CEST 2012 x86_64 AMD Sempron(tm) Processor 3400+
    /usr/bin/python2 2.7.3 (default, Apr 24 2012, 00:00:54)
    [GCC 4.7.0 20120414 (prerelease)]
    ================================================================================
    Using temporary directory /tmp/duplicity-OjWCPd-tempdir
    Registering (mkstemp) temporary file /tmp/duplicity-OjWCPd-tempdir/mkstemp-GZ2ieI-1
    Temp has 490532864 available, backup will use approx 60293120.
    Local and Remote metadata are synchronized, no sync needed.
    41 files exist on backend
    2 files exist in cache
    Extracting backup chains from list of files: ['duplicity-full.20120507T060530Z.manifest.part', 'duplicity-full-signat[51/4524]
    0507T060530Z.sigtar.part', 'duplicity-full.20120507T060530Z.vol1.difftar.gpg', 'duplicity-full.20120507T060530Z.vol2.difftar.g
    pg', 'duplicity-full.20120507T060530Z.vol3.difftar.gpg', 'duplicity-full.20120507T060530Z.vol4.difftar.gpg', 'duplicity-full.2
    0120507T060530Z.vol5.difftar.gpg', 'duplicity-full.20120507T060530Z.vol6.difftar.gpg', 'duplicity-full.20120507T060530Z.vol7.d
    ifftar.gpg', 'duplicity-full.20120507T060530Z.vol8.difftar.gpg', 'duplicity-full.20120507T060530Z.vol9.difftar.gpg', 'duplicit
    y-full.20120507T060530Z.vol10.difftar.gpg', 'duplicity-full.20120507T060530Z.vol11.difftar.gpg', 'duplicity-full.20120507T0605
    30Z.vol12.difftar.gpg', 'duplicity-full.20120507T060530Z.vol13.difftar.gpg', 'duplicity-full.20120507T060530Z.vol14.difftar.gp
    g', 'duplicity-full.20120507T060530Z.vol15.difftar.gpg', 'duplicity-full.20120507T060530Z.vol16.difftar.gpg', 'duplicity-full.
    20120507T060530Z.vol17.difftar.gpg', 'duplicity-full.20120507T060530Z.vol18.difftar.gpg', 'duplicity-full.20120507T060530Z.vol
    19.difftar.gpg', 'duplicity-full.20120507T060530Z.vol20.difftar.gpg', 'duplicity-full.20120507T060530Z.vol21.difftar.gpg', 'du
    plicity-full.20120507T060530Z.vol22.difftar.gpg', 'duplicity-full.20120507T060530Z.vol23.difftar.gpg', 'duplicity-full.2012050
    7T060530Z.vol24.difftar.gpg', 'duplicity-full.20120507T060530Z.vol25.difftar.gpg', 'duplicity-full.20120507T060530Z.vol26.diff
    tar.gpg', 'duplicity-full.20120507T060530Z.vol27.difftar.gpg', 'duplicity-full.20120507T060530Z.vol28.difftar.gpg', 'duplicity
    -full.20120507T060530Z.vol29.difftar.gpg', 'duplicity-full.20120507T060530Z.vol30.difftar.gpg', 'duplicity-full.20120507T06053
    0Z.vol31.difftar.gpg', 'duplicity-full.20120507T060530Z.vol32.difftar.gpg', 'duplicity-full.20120507T060530Z.vol33.difftar.gpg
    ', 'duplicity-full.20120507T060530Z.vol34.difftar.gpg', 'duplicity-full.20120507T060530Z.vol35.difftar.gpg', 'duplicity-full.2
    0120507T060530Z.vol36.difftar.gpg', 'duplicity-full.20120507T060530Z.vol37.difftar.gpg', 'duplicity-full.20120507T060530Z.vol3
    8.difftar.gpg', 'duplicity-full.20120507T060530Z.vol39.difftar.gpg', 'duplicity-full.20120507T060530Z.vol40.difftar.gpg', 'dup
    licity-full.20120507T060530Z.vol41.difftar.gpg']
    File duplicity-full.20120507T060530Z.manifest.part is not part of a known set; creating new set
    File duplicity-full-signatures.20120507T060530Z.sigtar.part is not part of a known set; creating new set
    Ignoring file (rejected by backup set) 'duplicity-full-signatures.20120507T060530Z.sigtar.part'
    File duplicity-full.20120507T060530Z.vol1.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol2.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol3.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol4.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol5.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol6.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol7.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol8.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol9.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol10.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol11.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol12.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol13.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol14.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol15.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol16.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol17.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol18.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol19.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol20.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol21.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol22.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol23.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol24.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol25.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol26.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol27.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol28.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol29.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol30.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol31.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol32.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol33.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol34.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol35.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol36.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol37.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol38.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol39.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol40.difftar.gpg is part of known set
    File duplicity-full.20120507T060530Z.vol41.difftar.gpg is part of known set
    Found backup chain [Sun May 6 23:05:30 2012]-[Sun May 6 23:05:30 2012]
    Last full backup left a partial set, restarting.
    Last full backup date: Sun May 6 23:05:30 2012
    Collection Status
    Connecting with backend: SftpBackend
    Archive dir: /root/.cache/duplicity/1498ef4c9557164d69523e5aec4c78ce
    Found 0 secondary backup chains.
    Found primary backup chain with matching signature chain:
    Chain start time: Sun May 6 23:05:30 2012
    Chain end time: Sun May 6 23:05:30 2012
    Number of contained backup sets: 1
    Total number of contained volumes: 41
    Type of backup set: Time: Num volumes:
    Full Sun May 6 23:05:30 2012 41
    No orphaned or incomplete backup sets found.
    RESTART: Volumes 41 to 42 failed to upload before termination.
    Restarting backup at volume 41.
    Registering (mktemp) temporary file /tmp/duplicity-OjWCPd-tempdir/mktemp-Fx_YTQ-2
    ^CRemoving still remembered temporary file /tmp/duplicity-OjWCPd-tempdir/mktemp-Fx_YTQ-2
    Removing still remembered temporary file /tmp/duplicity-OjWCPd-tempdir/mkstemp-GZ2ieI-1
    INT intercepted...exiting.
    Does anyone have some experience with this? It's a fairly good sized backup (well, for me at least) so I'd really hate to have to start over every time one fails!
    Thanks,
    Scott
    Last edited by firecat53 (2012-05-08 18:23:19)

    Ok, solved-ish. There were actually 3 issues:
    1. There's a problem in the 0.6.18 new python paraminko ssh internals that was preventing it from uploading more than about 1GB at a time, possibly because it's reusing the same ssh connection which some webhosts will kick off after a certain time or amount.
    2. The --num-retries parameter wasn't being read by the ssh backend
    3. There's a bug in some encryption validation code that had to be removed before a 'resume backup' operation would work correctly (it won't read the GPG encryption key correctly).
    So I reverted to 0.6.17 and removed a previously applied patch from the code found here.
    So far it seems to be working. The dev who answered me on Launchpad said that there's a memory leak with 0.6.17 so watch out when doing any backups over ~100GB or so.
    Scott

  • I'm suddenly getting the kernel panic message and constant restarts when connected to the time machine wireless network. if is switch to the BT network, all fine. no help found so far as to what's wrong or how to correct, anyone have any thoughts...

    Recently upgraded to mountain lion in order to buy the new tall tower for time machine backups. had to get technical support to help with set up as it wouldn't play ball with two computers. all working fine up until last week when the iMac started getting backup error messages. then system restarts independently when using time machine on the time machine wireless network. only stops restarting when I switch the wireless network back to he bt one, which is a pain obviously as can't back up to time machine then.  it has to be a problem with airport utility or something wireless but all says all up to date with software etc. all still works fine backing up from laptop on the wireless network, just the iMac is not happy. any help or thoughts very much appreciated.

    Hi, many thanks Bob, what you say is not unthinkable at all, although it does answer the question
    "what could I do *instead* of ..." rather than the one I actually asked, but seriously ...
    Shutting down might be an answer, although it would clear out my tmp directory - which I might not want to have to sort through looking for things I want to save every time I go to work, and also, now that nvram doesn't seem to work for disabling the boot chime, it can get a bit embarassing booting up in a busy meeting if I have forgotten to mute before I shut down. There are all sorts of other issues, such as editing documents, loading web pages and so on that I would have to set up again.
    Your suggestion of letting Apple know is a good one - thank you for the link.
    Take care,
    Mark

  • HT1688 I have pictures on my camera roll that when I try to click on them the only thing I get is a white screen. I took about 10 pictures on the same day and in the middle of all the pictures it has about 5 that come up white when I try to click on them.

    I recently took pictures at a family outing and all the pictures appear on my camera roll but when I click on about 5 of the pictures they all pull up as a white screen even though I can see the picture on the camera roll. How do I get these to pull up when clicked on ?  I have completely shut the phone off twice thinking this would reset pictures but it has not made a difference. What can I DO??

    My sister's 5s is having the same issue since yesterday.
    Neither resetting via holding home+power buttons helped, nor the "reset all settings" in the settings. The only option left is erasing the iPhone and setting it up as a new phone ( or restoring from a backup?)

  • I have an iphone5 and no apps can access my camera roll. When i go to privacy settings there is no option to turn it on. How do I get these apps to access my camera roll? I have tried deleting and reinstalling the apps.

    I have a new iPhone 5. I am trying to get apps like instagram, facebook etc to upload pictures from my camera roll. When i try to get a picture from the camera roll it instructs me to go to settings - privacy - photos and turn access on. When I do this, there is no option to turn it on. All i get is a screen saying "apps that have requested access to your photos will appear here". NO APPS APPEAR HERE. When I go to instagram I get the message "this app does not have access to your photos. You can enable access in Privacy Settings." I CAN'T enable it in Privacy Settings. I tried deleting the app and reinstalling it and it didnt work. Please help! Much appreciated.

    I'm also on iPhone 4, iOS 6, and have exactly the same problem. I've tried resetting privacy settings, turning restrictions on and off, deleting and reinstalling apps. Nothing seems to work. The lists of apps in privacy settings are all empty, except for location services. When using Tweetbot the app is regularly asking for permission to access my twitter account, but even when I allow that, the app doesn't show in privacy settings. When I try to go into the camera roll from the Facebook app, the app tells me I have to allow access to the camera roll from the privacy settings - which I can't do since the app is not listed there.

  • HT5625 I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

    I'm trying to create a new Apple ID but when I was putting on my information, there's a box asking for an ITunes gift code. What's this and how can I get one?

    You're not obligated to insert a gift code. But you can purchase gift codes on the Apple online store (gift cards or certificates) or Apple Retail store
    Gift codes are pre paid cards so you can use credit on the iTunes Store to purchase content
    To create apple ID without payment method:
    http://support.apple.com/kb/HT2534?viewlocale=pt_PT

Maybe you are looking for