Smart Data Access

Hi All, I have one BW on HANA system rev 80.. I learnt that SDA is out of box funtionality. so if i need to get data from other BW system netweaver 7.01.. Can i get data from that system ( Cube ) and build my query.
Also if someone has any guide on how to use Smart data access ,, Please sahre with me,, I am pretty new to it.
Thanks

Hi Faisal Mehmood,
Your question is not clear. If I have understood your question properly You have to BW system one in 7.01 on Any Traditional DB other BW system on HANA.
Now you want to access the 7.01 Cube Data in BW on HANA system .Am I right.If yes then check my answer below:
Option1:
In 7.01 system create a OHD and push the cube data to DB table of the own system.(it means if you are running the 7.01 BW system on oracle DB then push the cube data to the Local DB table.).If you don't have the OHD license then try Export data source option.
Then Go to HANA system where your other BW system is installed establish the SDA to a oracle system as described in the above posted document.
Access the OHD table and virtualize in HANA. Then this table can be accessed in HANA views or in BW object Open ODS .
Option 2:
From 7.01 system use DXC option and push data to HANA
http://help.sap.com/hana/SAP_HANA_Direct_Extractor_Connection_Implementation_Guide_en.pdf
Then from the /BIC/A<DATASOURCENAME>00 table in HANA you can build HANA views and query on that data.
Hope this answers your question.
Thanks & Regards
A.Dinesh

Similar Messages

Can't access physical disk's SMART data

I recently installed Windows Server 2012 on an old box, containing an Intel S3210SH motherboard and Intel Xeon X3320 CPU with 4GB memory and an LSI Megaraid SAS 9240-8i.
I created a Storage Space with a single Pool containing a virtual disk composed of 6 2TB WD drives. I configured the virtual disk as RAID.
Since I created the virtual disk, I cannot get SMART information from the OS. When I issue the following command in Powershell, no temperature is shown.
PS C:\Users\Administrator> Get-PhysicalDisk –FriendlyName PhysicalDisk1 | Get-StorageReliabilityCounter
ObjectId : {9670d718-9158-11e4-93ee-001517c993e8}:reliabilitycounter
PassThroughClass :
PassThroughIds :
PassThroughNamespace :
PassThroughServer :
UniqueId : {9670d718-9158-11e4-93ee-001517c993e8}:reliabilitycounter
DeviceId : 1
FlushLatencyMax :
LoadUnloadCycleCount :
LoadUnloadCycleCountMax :
ManufactureDate :
PowerOnHours :
ReadErrorsCorrected :
ReadErrorsTotal :
ReadErrorsUncorrected :
ReadLatencyMax : 18
StartStopCycleCount :
StartStopCycleCountMax :
Temperature :
TemperatureMax :
Wear :
WriteErrorsCorrected :
WriteErrorsTotal :
WriteErrorsUncorrected :
WriteLatencyMax :
PSComputerName :
If I install 3rd party programs, for example, CrystalDiskInfo, none of the 6 disks are recognized, therefore no display.
I experimented by shutting the system down and disconnected a SATA cable from the Megaraid to one of the 6 disks and reconnected a SATA cable to that same disk coming from the motherboard. I then booted into a Windows 2008 R2 disk (dual boot on two separate
disks). When I re-ran CrystalDiskInfo, that single disk was recognized by the OS and reported its temperature.
I am afraid to rely on this system without visibility into SMART data, especially temperature.
Any suggestions?
Thanks Chuck

Hi chklap,
Since MS only offers a standardized interface to obtain the data, we cannot state a lot on how to interprete data details in case a drive predicts a failure.We even cannot comment
on how reliable a failure prediction is, as this originate from the device. conditions on which devices do report that depends on the manufacturers custom device internal prediction logic.
For several LSI raid controllers, the driver system writes to the event log if any of its attached devices encounters a SMART failure prediction.
That also applies for the data reported through the vendor specific member of STORAGE_PREDICT_FAILURE
The device must though support prediction failure. If the device does not support failure prediction, IOCTL_STORAGE_PREDICT_FAILURE fails with a status of STATUS_INVALID_DEVICE_REQUEST,
and the data in the output buffer is undefined
If device supported the disk class driver queries the device for failure prediction status and reports the results.
The similar thread:
Can not get SMART information of Disk connected thru Sil3132 HBA
https://social.technet.microsoft.com/Forums/windowsserver/en-US/828b7764-e0c7-4c87-b7fc-b2a79b2b110b/can-not-get-smart-information-of-disk-connected-thru-sil3132-hba?forum=winservergen
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Solaris 8 07/01 installation : Fast Data Access MMU Miss

hello,
Because of a hardware crash of my 9.1Gb hard drive, I plugged a brand new 40Gb drive in my Ultra 10 workstation.
I tried to re-install my release of Solaris 8 (06/00), but this release detect only a 5Gb hard drive (but the installation work).
I downloaded and burned Solaris 8, release 07/01 to break the 32Gb/drive limit, but when I type 'boot cdrom' or 'boot cdrom install' at the bios prompt, I get :
Fast Data Access MMU Miss.
I upgraded the PROM to the lastest version, and tried to reburn the CD.
Does someone has any idea to help me ?
Greg.

974009 wrote:
Hello all,
I have been working on a Sun Netra T1 105 for the past two weeks That system is too old for Solaris 11 and Solaris 10. That generation UltraSPARC module isn't going to be recognized by those newer OS's.
I suggest you go to your preferred online auction web site (for example, eBay) and get any Solaris 8(SPARC) or Solaris 9(SPARC) for that little 1U box.
I have disabled auto boot so when it starts it is going to the ok prompt.Smart. Good move for troubleshooting.
The CD of Solaris 11 is a new one that I burned just two weeks ago and I burned it on 24x speed.
And it is the Sparc version that I downloaded.
I also tried installing a DVD-ROM with the Solaris 10 DVD but it gave the same error.I hope that means you replaced the original CD reader with a DVD-capable drive.
When I type probe-ide it shows that the seconday Master is a Removable ATAPI Model: TOSHIBA CDROM XM-7002BcYes. Since that model computer was discontinued in 2002, there was only a CD-capable drive ever qualified to be used in it.
When I type probe-scsi it shows:
Target 0
Unit 0 Disk Seagate ST39103LCSUN9.0G034AA 9GB disk isn't going to be large enough for much more than just a core install of Solaris. You may again need to get larger drive(s) at that same online auction web site. The chassis can hold two internal disks.
Thank you very much.
Hendrik
Edited by: 974009 on 29-Nov-2012 07:34When you get the chance, glance at this link to a copy of the Netra T105's resource page as it appeared in the old Sun System Handbook (SSH). The link is to a non-Oracle site that mirrors the old now-discontinued free version of that SSH.
Next, while there's not much system documentation for that box offered by Oracle, you can glance through what there happens to be here:
http://docs.oracle.com/cd/E19628-01/index.html

Follow up question about interpreting smart data test on 160GB classic

I posted this question regarding the problem I am having with my 160GB ipod classic:
http://discussions.apple.com/thread.jspa?threadID=2153948&tstart=0
It appears noone is able to help me, so I have found some more information:
In short, itunes will not write to my 160GB ipod once it reaches about 35GB / 160. Windows will write to it, but only at 500KB/sec rather than the usual 19+Mb/sec. It just crawls once it hits that point. After following some advice online I came up with the following results using the HD tests in diagnostic mode.
smart data test:
retracts: 138
rallocs: 563
pending sector: 55
poweron hours: 1016
starts/stops: 267
temp: current 26C
temp: min 19C
temp: max 53C
and for the HDD spec test:
sno: (not sure if i should post a serial number?)
FW Revision: NB100-05
LBAs: 0x12a19eb0
These are the only tests that show up under the I/O HardDrive section. Should there be more? It seems like there might be from what I read, but I am not sure.
Anyway, any help interpreting these results would be greatly appreciated.

adame wrote:
rallocs: 563
pending sector: 55
etc.
Your drive is probably toast. Compare your SmartData stats with mine:
Retracts: 844
*Reallocs: 12*
*Pending Sectors: 0*
PowerOn Hours: 2037
Starts/Stops: 830
Temp: Current 29c
Temp: Min 10c
Temp: Max 50C
I've only 12 remapped sectors and none pending. From the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
I'm sure you'll find the counts go up if you try to do a surface scanning disk check. Sorry it's not better news but at least you know where the problem lies. Assuming your iPod is out of warranty it's probably time to get your iPod refurbished with a new drive or to buy a new iPod.
tt2

Failed to open the console and System Center Data Access Service wont start - SCOM 2012

Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=============================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=============================================================
Failed to connect to server ' xxxxx'
Date: 16/09/2013 20:36:16
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'xxxxxx'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could
be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
=============================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
================================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Yes, i change the credentials, but doesnt work.
Yes, i put the events in the
main question!
Events Logs:
=======================================================
Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=======================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

How can I disable data access on C1-01 ?

I have a C1-01, for emergency use only. Today it displayed an unsolicited "Download Failed", message, and sure enough, my paygo account had been emptied. How can I prevent all data access, ie attempts to update firmware, internet access, etc?
TIA, Richard
Solved!
Go to Solution.

easiest way is to contact your network operator and ask them to disable your data plan and all internet access on your device. there are also a few miscellaneous settings in your phone, so you can try deleting access points if they are displayed in the Settings. i would check the phone Settings menu and the Web browser settings for items that you can turn off / disable.

How to get Current Log in BO user name in data access driver

In universe, to get the current log in user is via @Variable('BOUSER').
Right now, I need to be able to get the user name in the data access driver. I am writing a customized data access driver because we need to patch some where clause on the the query generated by the universe based on the logged-in user info. I only think of using end_sql parameter or adding an universe level filter to patch the @Variable('BOUSER') to the query, which would not work if user want to use customized query.
Can anyone tell me how to get currentBO user name from connection server ? or how @Variable('BOUSER') is translated into the logged-in user name in the universe?

Shweta,
The link you provided was the Auditor guide for BO 6.x, I'm not sure it that is going to help Karen or not.
Karen,
There is function called connection
(usage: =connection([Query Name]), where [Query Name]
denotes the name of the tab for the query under Edit Query)
Here is some of the output from connection:
4;ODBC18;MS SQL Server 2000166; VERSION=7; USER=xxxxx;
PASSWORD=; DBTYPE=Relational; DATABASE=xxx_xxxx;
ODBC_USER=xxxxxx; ODBC_PASSWORD=; BO_DSN=xxxx_xxxx;
BO_DRV_CONNECT_MODE=0; 224; VERSION=6; Name=xxxxx; Shared=4;
LoginTimeout=600; Timeout=600; Pool Time=60; Array Fetch Size=10;
Array Bind Size=5; RecommendedLenTransfert=1000; Password_Encryption=x;
AliasTable=; MeasureDimension=; Hint=; ConnectInit=; ArrayFetch=1;
I'm not sure if this info helps out either, being that connection provides info on a post-processing basis and it sounds like you need to get out ahead of the SQL generation. The @variable('bouser') would seem like the place to be, however, in allowing custom SQL to take place you loose the bouser due to an individual could customize the SQL to the point that it gets unwantingly yanked out. The end_sql might be your answer...
Thanks,
John

How to get current logged-in user name in data access driver or in universe

In universe, to get the current log in user is via @Variable('BOUSER').
Right now, I need to be able to get the user name in the data access driver. I am writing a customized data access driver because we need to patch some where clause on the the query generated by the universe based on the logged-in user info. I only think of using end_sql parameter or adding an universe level filter to patch the @Variable('BOUSER') to the query, which would not work if user want to use customized query.
Can anyone tell me how to get currentBO user name from connection server ? or how @Variable('BOUSER') is translated into the logged-in user name in the universe?

I do not know your EJB Service. But you should pass the credentials of the current logged on portal user to your service. That's not by default I think.
I had a similar problem with CAF developed webservices. I had to turn on permission checks in my web service and passed the credentials via logon ticket.
Regards, Bernd

Data access error while running the script in fdm workbench script editor

Hello Experts,
I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                          -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
Thanks in advance...

Hi,
Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
Suggest your valuable suggestion's
Thanks in advance...
I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

'Data Access Error' while trying to delete period using Table Editor in FDM

Hi,
I'm trying to delete a period that has been entered wrongly using Tools->Table Editor option.
But when I try to 'Update Grid' after deleting the Period,I get 'Data Access Error'.
Could any one let me know how to solve the error.
Thanks in advance

Hi Kelly,
There is no data that is entered in that period.The data will be entered for that period next month.
POV is also not set to that period,but still the problem persists.
Thanks

Issue with Enterprise Library's Data Access Application

I do not know if I have the correct forum for this post. I hve put it in what I believe is the most likely best forum, but please move this if there is a more germane forum for it.
I have inherited a solution (C#) which uses the reference Microsoft.Practices.EnterpriseLibrary.Data. The reference was included with the codebase I inherited, there are no missing references.
When the library is called with:
Microsoft.Practices.EnterpriseLibrary.Data.ExecuteDataSet("configConfigurationKeysSelect", parameterValues);
It complains with the runtime error:
[InvalidOperationException: The stored procedure 'configConfigurationKeysSelect' doesn't exist.] (I have put the full trace below)
This is true, there IS no stored procedure  'configConfigurationKeysSelect' but there is a table named  'configConfigurationKeys.'
I assumed this stored procedure is built on the fly to select from that table? Must I do something regarding  Enterprise Library's Data Access Application so that this works on the system I am running it on? (I am simply accessing the references
included with the sourced for this, nothing else). I am looking for some guidance here, and thanks in advance.
Stack trace on error as:
[InvalidOperationException: The stored procedure 'configConfigurationKeysSelect' doesn't exist.]   System.Data.SqlClient.SqlCommand.DeriveParameters() +5344249
System.Data.SqlClient.SqlCommandBuilder.DeriveParameters(SqlCommand command) +115
Microsoft.Practices.EnterpriseLibrary.Data.Sql.SqlDatabase.DeriveParameters(DbCommand discoveryCommand) +72
Microsoft.Practices.EnterpriseLibrary.Data.Database.DiscoverParameters(DbCommand command) +251
Microsoft.Practices.EnterpriseLibrary.Data.ParameterCache.SetParameters(DbCommand command, Database database) +225
Microsoft.Practices.EnterpriseLibrary.Data.Database.AssignParameters(DbCommand command, Object[] parameterValues) +53
Microsoft.Practices.EnterpriseLibrary.Data.Database.GetStoredProcCommand(String storedProcedureName, Object[] parameterValues) +161
Microsoft.Practices.EnterpriseLibrary.Data.Database.ExecuteDataSet(String storedProcedureName, Object[] parameterValues) +70
Enterprise Library's Data Access Application

This is true, there IS no stored procedure  'configConfigurationKeysSelect' but there is a table named  'configConfigurationKeys.'
I assumed this stored procedure is built on the fly to select from that table? Must I do something regarding  Enterprise Library's Data Access Application so that this works on the system I am running it on? (I am simply accessing the references
included with the sourced for this, nothing else). I am looking for some guidance here, and thanks in advance.
Why do you assume that a stored procedure is create on the fly? Looking at the documentation for this component, I don't see a mention of such.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

0187 EAIA Data access error Lenovo Twist

When the error happend the systemboard was replaced (0187 EAIA Data access error on startup), and the error came back up again. Replaced the systemboard again and the error persists. Can't update eprom serial information because of this error. I currently have about 6 machines doing the same thing, and was wondering if anyone else had experianced this issue?

I get the same error on a brand new Lenovo Thinkpad S540 (+-1 month old). Besides that first issue I'm also getting these errors:
2200: Machine Type and Serial Number are invalid
2201: Machine UUID is invalid
These occur together and only in about one out of every ten boots.
Curious what's wrong here.

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

How to Install Oracle Data Access Components (ODAC) on Windows Server 2003?

I recently installed "32-bit Oracle Data Access Components (ODAC) with Oracle Developer Tools for Visual Studio" on my computer (Windows 7, 64bit). Everything seems fine and I can develop and run my application in Visual Studio 2010 and IIS 7.
Now, when I deploy my application to the Server, it raises error:
Exception: System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleCommand' threw an exception. ---> Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Obviously I need to install ODAC on the server, too. My server is:
- Windows 2003 32 bit R2 (I know, I know!)
- IIS 6
So. I downloaded the same installation from Oracle website (ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio [11.2.0.3.20]) and installed it on the server. But still getting the same error.
PS: When I was installing, I chose Oracle Data Access Component for Oracle Client 11.2.0.3.20 in Oracle Universal Installer. hmmmm. Should I choose "Oracle Server" instead? Screenshot
Edited by: 1000434 on Apr 17, 2013 6:35 AM
Edited by: 1000434 on Apr 17, 2013 6:36 AM

ODP.NET, Unmanaged Driver uses unmanaged dependencies in the Oracle Client. The error you see means you have another Oracle Client installed on the Win2003 machine and ODP.NET is attempting to load the incorrect Oracle Client version, rather than the version you installed ODP.NET with.
What you need to do is direct ODP.NET where to find the correct version of its unamanaged Oracle Client dependencies. This will be generally the bin directory of your Oracle Client home that was installed with ODP.NET.
You can learn more about DllPath here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/InstallODP.htm#sthref94
If you're not familiar with how to set ODP.NET settings in the Registry or .NET config files, you can read how to do that here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm#sthref106

Smart Data Access

Similar Messages

Maybe you are looking for