SMART DISC ERROR

Hallo zusammen,
ich habe ein Laptop G62 .. seit dem 7.1.11 und jetzt höre ich, das es keine Garantie mehr gibt.
Der Harddisc test läßt sich auch nicht mehr durchführen.
Ich bekomme aber die Fehlermeldung smart hard disc error.
Das Laptop braucht ca. 20 Min. um hochzufahren.
Meine Frage.
Wenn ich jetzt eine neue Hard disc einbaue , ist dann alles wieder o.k. oder ist das Problem nicht die Harddisc sondern etwas anderes.
Danke
JADILO

Bitte.
Das ist viel zu teuer.
Eine gute Qualität 500 GB Festplatte erhalten Sie auf den untenstehenden Link.
http://www.amazon.de/Western-Digital-Scorpio-Festplatte-7200rpm/dp/B004LR1RPK/ref=sr_1_11?s=computer...
Sie können das gleiche in 350 GB auch für weniger Geld erhalten.
http://www.amazon.de/Western-Digital-WD3200BEKT-Scorpio-Festplatte/dp/B001CO3EKQ/ref=sr_1_5?s=comput...
Lesen Sie die Bewertungen. Sie sind sehr gute Festplatten.
You're welcome.
That is way too expensive.
You can get a good quality 500 GB hard drive at the link below.
You can get the same in 350 GB too for less money.
Read the reviews. They are very good hard drives.
Paul

Similar Messages

Disc error -43 occurred while reading or writing to a scratch disk.

"Disc error -43 occurred while reading or writing to a scratch disk. Sorry, but this error is unrecoverable."
What does this mean, and how can I fix it?
I assume it affecting my performance if PS is not able to write to the scratch disc???
I get the error every time I shut down Photoshop.
Attached are my settings.

It means that the OS says there was an error with your hard disk.
You need to check the disk for problems, and make sure you have your data backed up before continuing.
It could be a one time thing (especially if the SMART system remapped the bad block), but could also be an indication of serious problems with the disk if it recurrs.

HT1455 disc error and won't allow me to start up in safe mode.

Disc error for main HD. My laptop shuts down in the process of rebooting, I can only access disc utility when I hold the option key during startup. I also can't open in safe mode, but I can't remotely access my laptop to remotely access it in safemode through my other mac because I have remote access turned off. I'm just trying to safely backup my laptop and will reformat the disc. Any advise will be appreciated.
Thank you,
Chappie001

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Burning disc error

i have tried updating drivers and windows (xp sp2), reduced writing speed to 8x, udpated itunes, using cd-r and i STILL get an unknown disc error occurred-cannot be burned. here are diagnostics
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCG-K35(UC)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (6.1.1.48),
UpperFilters: Cdralw2k (6.1.1.48), pwd_2k (6.1.1.48), GEARAspiWDM (2.0.6.1),
Found aspi32 running.
Current user is an administrator.
Video Display Information:
RADEON IGP 345M
ATI MOBILITY RADEON 9200
Connected Device Information:
DiskDrive, photosmart printer card reader (HPH11), Bus Type USB
DiskDrive, MemoryStick or MemoryStickPro Device, Bus Type SSA
DiskDrive, TOSHIBA MK8025GAS, Bus Type ATA, Bus Address [0,0]
CDROM, SONY DVD RW DW-D56A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: SONY DVD RW DW-D56A, Rev PFS3
Audio CD in drive.
Found 15 songs on CD, playing time 58:28 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:38:20
Track 3, start time 08:40:40
Track 4, start time 12:30:63
Track 5, start time 16:19:25
Track 6, start time 20:16:08
Track 7, start time 24:28:00
Track 8, start time 27:49:71
Track 9, start time 31:58:43
Track 10, start time 35:59:36
Track 11, start time 39:54:44
Track 12, start time 43:31:33
Track 13, start time 47:20:59
Track 14, start time 50:42:43
Track 15, start time 54:29:64
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 12 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SONY DVD RW DW-D56A on CDR media at speed 24X.
please help!!

I tried 3 discs, finally getting it to burn.

Windows XP installation "Disc error" message

I am trying to install Windows XP Pro w/SP2 on my Macbook Pro, running 10.5.6. After partitioning my disc through Boot Camp, I restart with my Windows disc and reach the screen where I have to select the correct partition. After selecting partition 3, I reach a black screen that says, "Disc error. Press any key to restart." None of the keys respond, and I'm forced to hold down the power key. When I try and reboot off the XP disc, the same error message appears. Apple tech support was of no help. Anyone???

Hey there,
Check out this page below. It may have to do with how and where you are formatting the the Windows partition. Hope this helps.
http://hubpages.com/hub/How-to-Solve-the-Boot-Camp-Disk-Error
B-rock

How do I burn a DVD R disc with Windows Movie Maker? It indicates disc error on my DVD player. Someone thought it had something to do with Itunes? I reloaded Itunes 1 month ago and had no problem creating this disc then. Help

I have made several DVD+R discs in the past using Windows Live Movie Maker sucessfully. I made one about one month ago for my son's b-day. I am using the same discs as I had then. When I tried to burn the disc, it indicates that it is burning, however, when I insert it into the DVD player at home on our TV (like I"ve always done), it indicates disc error. Someone mentioned that the burner goes out every now and then when Itunes is uploaded? When I burn the disc, I can pull it up on my home and work computers, so I know that it is there.

Yes, you can distribute a burned disk of the project to those who can create duplicate disks. Or create a disk image of the iDVD project using the File ➙ Save as Disk Image menu option.
Then you can distribute the disk image to those who will burn the disks. For PCs you'll have to convert the .dmg file to a .iso file so they can burn it. This website describer how: Mac Help - Convert and Burn Mac .dmg or .img to .iso Windows PC-Compatible Disk Image
Suggest to them to burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
It would be prudent to rest your optical drive for about 30 minutes after burning 3 disks in a row. That will give the laser time to cool down before you start another batch.
OT

I have XP, SP3; I can no longer burn CDs get a "insert a blank disc error". I have bought new blank discs of various kinds, drive works well otherwise. It just will not allow me to burn playlists anymore. Anyone have an answer to this?

Getting "insert blank disc error" , cannot burn CDs anymore. Tried new/other CDs, same issue. Anyone have an answer to this?

Getting "insert blank disc error" , cannot burn CDs anymore. Tried new/other CDs, same issue. Anyone have an answer to this?

When I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

when I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

Rather than burn directly to disk follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

Can t back up library to disc. error 2131 . whats wrong ?

Hi , Can anyone help me back up library to disc. error 2131 keeps appearing.

Update: Success! I used my iPod as an external hard drive following these instructions:
http://support.apple.com/kb/HT1329?viewlocale=en_US
After I reformatted I reinstalled my old iTunes 6 and dragged the folder back to My Music. At first, iTunes wuldn't sync a couple hundred songs to my iPod because I wasn't "authorized" so I had to enter my Apple ID and password. Downloaded latest software for Itunes and iPod and all is good.
Investing in an external hard drive still sounds like a good idea, since this was my first reformat and it was a bit nerve-wracking.

Smart View Error: Requested Operation Failed. Error: Java.lang.NullPointerE

Hi All,
I get the below error when i refresh a report from smartview.
Small reports works fine but if the report is huge i get this error
Smart View Error: Requested Operation Failed. Error: Java.lang.NullPointerE
Smart View 11.1.2 MS OFFICE 2007 SP3
Essbase 11.1.2
Any pointers.
Regards,
Mink

you mean i have to set below in essbase.properties of aps
SET JAVA_OPTIONS=–Xms128m –Xmx1024m
Regards,
Mink

How can I fix SMART disk errors?

Ive had SMART disk errors for years now and its not allowing me download maverick or yosimite. I tried to download embroidery software just now and now it says “no file system” or something like that. What do I have to do to finally fix this annoying problem? I have done disk utility repair and I guess that was no go. Can anyone walk me through fixing this or do I have to basically buy a new computer? If its a matter of sifting through data someone can walk me through but if they gotta open up the guts on this thing, then I guess I’m in trouble. Any advice?

zoe2432 wrote:
so all of the problems were due to an apple problem? I guess I missed out on getting them to fix, I never knew about that! How much would you estimate this will cost and would I be better off buying a new Mac- if the cost is nearly the same that is? Thank you so much for the info I really appreciate you!!
Your disk is dying not the entire iMac. The disk can be removed & replaced. The Mac should be able to work again. Disks start at about $50 - so you probably don't need to throw it out just yet
The issue is with Seagate drives that Apple installed. Technically not Apple's fault, but as they sold the hardware they are responsible for product recalls etc.
See if an Apple store can help you.
http://www.apple.com/retail/storelist/

I cannot open photoshop due to file damaged by disc error

I cannot open CS5 due to this message "could not initialize photoshop because the file has been damaged due to disc error

JJ,
I tried everything you mentioned but to no avail, still getting the same response "could not initialize photoshop because the file has been damaged by
disc error. I did run the Chkdsk and it didn't help, I still can't open CS5, not even to check updates....
Thank you,
Kelli Herring
Kelli Herring Photography

Disc error when I install Panther

I have a powerbook G4 that is really acting up. It has come to the point I had to reinstall my original software. Now when I go too upgrade to Panther it tells me disc error at the end of the installation of the first disc. Also I can not get on the internet. I have installed the 10.2.8 uograde also. Thanks for any help
JOhn

Hi John!
Exactly which model PowerBook G4 is it?
What is the Processor speed?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
When manufactured, which version of OS, was pre-installed?
Did you use the original system install discs to reinstall?
Did you perform an Erase & Install?
Are you using the Full Retail Version, of the Panther Install CDs?
ali b

Smart View error when opening Powerpoint files read-only

Users are experiencing the following error when they open a Powerpoint file as read only. Using MS Office 2007 with Hyperion 11.1.2.1 Doesn't happen in edit mode. Error reappears every time user pages down to next slide. Quite annoying!
Shape. Tags : Invalid request. Presentations cannot be modified.
Has anyone experienced this issue and resolved it?
Thanks,

Source: My oracle support
=============================================================================================================================
Applies to:
Hyperion Planning - Version: 11.1.2.1.000 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
In Smart View Version 11.1.2.1.000, when attempting to open a PowerPoint document that is already open by other user the following error occurs:
ERROR : Shape.Tags: Invalid Request. Presentation cannot be modified.
Cause
This issue has been verified as Unpublished Bug 12418027: SMART VIEW ERROR : SHAPE.TAGS : INVALID REQUEST. PRESENTATION CANNOT BE MODIFIED
The cause of the problem is that when a presentation is edited by another user, an exception will be thrown while trying to query the tags in the presentation from a different process.
Solution
This issue has been fixed in the Oracle Hyperion Smart View for Office, Release 11.1.2.0.000 Patch Set 1 (PS1): 11.1.2.1.102 Release.
This patch is available via My Oracle Support:
1. Log into the My Oracle Support portal.
2. Choose the Patches & Updates tab.
3. Enter the Patch Name or Number from the drop-down box.
4. Perform a search for Patch:12968304 for your corresponding OS platform.
5. The patch file includes both installers and the readme.
Additional Information:
Please refer to the patch readme for system requirements, dependencies, and installation instructions.

Photoshop CS6 Stopped Working. Can Not Re-Install. Disc Error?

I had downloaded Photoshop CS6. It worked for a while but now when I relaunch it, a "disc error" message shows up. I tried to re-install CS6 without success. I then threw the application in the trash to start from scratch. I still can not install. Please help?
Thank you,
David Hunter

Hi chilkootcindy,
Regarding the error you are receiving using BlackBerry App World™ storefront, could you please verify that the date and time settings on your BlackBerry® Bold™ smartphone are correct before retrying to download? This KB article provides the steps to check this. ""An error has occurred. Please try again later" is displayed when the user attempts to login to BlackBerry App World " http://bbry.lv/I2w2E3
If these settings are correct, I would suggest verifying with your wireless service provider that your data plan currently supports these applications.
The following KB articles provide additional information on the "HTTP: 400 Bad Request" error you are receiving in your BlackBerry® Bold™ smartphone browser and the Error ID 40820 you are receiving in BlackBerry App World.
""HTTP: 400 Bad Request" is displayed when attempting to browse the internet on the BlackBerry smartphone" http://bbry.lv/QBNNNh
""BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again. (Error id: 40820) " error is displayed when opening App World on the BlackBerry smartphone" http://bbry.lv/H9ZfLO
Hope this is helpful.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

SMART DISC ERROR

Similar Messages

Maybe you are looking for