Smart export/import - unable to import project that uses 'xml' technology

Hello,
I have smart exported project and this project uses technology 'XML'. When I'm trying to import it, there are following issues (screen) - no fix available to choose:
http://screener.tk/f/o/f/z6nRM.png
So, it seems technology 'XML' is not recognized during import, because it has different ID. On repository I'm trying to import to, XML has ID 27999. So, I manually edited SmartExport.xml file and changed all occurences of 1189 to correct ID: 27999 and tried again to import. After this change, there are no issues. But just after I start import, following error message is thrown and import fails:
http://screener.tk/f/o/f/wf8R0.png
The same issue when I'm trying to import any project that uses any not built-in technology. After importing technology on destination server, ID doesn't match. And if I change ID in SmartExport.xml, no issues but import fails due to error similar as above.
So, what is the correct way to perform succesfull import/export in this cases and how to fix "dirrerent origin" errors? Do you have any idea?

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Similar Messages

Archiving Projects that use Nested Sequences

I'm looking for some help using Project Manager to archive projects that use nested sequences.
I work at the University of Michigan, we are wrapping up a study that is based on files from many Premiere Pro projects. Each project started with 150 to 160 min of video footage from two cameras.
Of this we have edited down to a 10 – 20min finished sequence containing footage from both cameras as a two-camera shoot. I want to archive eachproject (to save HDD space) retaining only the used sections of footage in thePPro archived project, allowing us to make minor edits to the projects.
My workflow has been to rely heavily on nested sequences throughout each project. From two sequences containing all of the footage from Camera1 and Camera2 all the way to the final cut sequence everything is dependent on a series of interim nested sequences. So the last sequence “Final” is based/linked on the very first sequences. When I attempt toarchive this using Project Manager the nested sequence edits are not recognized as individual clips. I either end up with all of the original footage or no footage. I’m not sure how (if?) I can archive these projects in a way to eliminate all but the final file footage segments with 30 frame handles.
Can anyone point me in the right direction or offer some advice?

figure for $1000/terabyte drive
Alot less than that, you can get a good Dual HD enclosure for $100 and probably less than that, and 500 Gig Drives for about $250 a piece, so assume about $600 without shopping too hard.
I find it is alot easier to use HDs, and have a couple of copies for important projects. You can use the other items as another backup (never can have too many) and going to be easier than having to recapture, especially if there was dropped framess or timecode issues. Guess it comes down too how often do you have to go back annd re-edit a wedding DVD once it is done, and what will make your like easier when it is said and done, but if it happens, on the HD just open it up, otherwise you have to recapture the tapes which is a couple of hours at least it sounds like.
As to archieve DVDs, who knows. There have been claims that the original CDs were to last 100 years, some of the ones I bought when they first came out started to go a few years ago. Same for some other media.

How to edit bitmap which is imported in flash using xml and save the edited bitmap back to xml in flash.

hi all
It would be appreciated if any one let me know how to edit
bitmap which is imported in flash using xml and save the edited
bitmap back to xml in flash.
Is it posible to save the bitmap data in flash?
thanks in advance

Yes you can... but like I said before you need to upload the
data from the changes you make to a server.
In terms of the solution... its unlikely that you'll find one
specifically for your needs. You will have to learn whatever you
don't know how already and maybe adapt some existing examples to
your needs.
To change the visual state of a movie clip... you just do all
the regular things that you want to do to it using flash... scale,
rotation, drawing API , textfields etc in actionscript. If you
don't know how to how to do that stuff, then you need to learn that
first. That's basic actionscript.
You can capture the visual state of a movieclip using the
BitmapData class. That includes a loaded jpeg. You can also
manipulate bimatp data using the same class. You should read up on
that if you don't know how to use it or check out the examples
below for uploading info.
For uploading to the server:
Here's an as2 solution that took 15 secs to find using
google:
http://www.quasimondo.com/archives/000645.php
If you're using as3, google search for "jpeg encoder as3" and
look through that info. There are also historical answers in the
forums here related to this type of thing that might help as
well.

Compile a project that uses Spark modules (SDK 4.5) with FB4.1?

Is it possible to compile a project that uses Spark modules with Flash Builder 4.1?
I've added SDK 4.5 to FB and selected it in the project properties (no problems here).
But how about the 'Flex modules' tab in the project properties window, will it be able to add Spark modules to the application?

Yes, you will be able to use s:Module with FB 4. You'll have to do a new MXML component, then go to Flex Modules and click on the add button. (The new module wizard there won't support the spark module)
However, please note that this is unsupported in the sense that we haven't tried that out at our end. (But I personally have and it works )
-Anirudh

Export/Import Project still buggy in v2.1.3

After seeing the update notes for v2.1.3 and noticing references to project importing, I started to get excited that maybe the bugs have been ironed out. Unfortunately my longstanding bug still remains.
If anyone can think of any workarounds I'd be extremely grateful...
I have a 2.16GHz Intel Core Duo MacBook Pro with 2GB RAM, running OS X 10.5.6 and now Aperture 2.1.3
I have a project with many images, arranged into stacks, a pick in each stack with many adjustment and a 62-page book created from these picks. There are also some smart albums and a light-table.
Now I export the project (i.e. in the Project Inspector I right-click the project and choose Export > Project) to a file on the desktop and rename the existing project in Aperture. I now import the saved .approject file and I find that all my Picks are no longer Picks and my book is therefore no longer made up of my desired images. (I've tried this many times now and ruled out the possibility of a corrupt export file).
As a result, when I select the Book I get the "Non-Pick Images" dialog with the dreaded "One or more placed items are no longer the pick of a stack." message. "Use Current Pick" ruins the book - I have to go through and work out all the picks again (and also re-pan all the images within the Photo Boxes as this data has also been lost). "Create new Version" appears to preserve my book's original look, but my project now contains a couple of hundred more images than it used to and my other albums and light-table still have incorrect images shown as the Picks.
Does anybody have any ideas of what I can do to ensure the stack-picks are preserved during the export/import process?
(By the way, the reason I'm exporting and then re-importing is because I actually want to do the export from my laptop where the project is and then the import on my main work machine where the rest of my Aperture library lives, but that fails for the same reason, so I'm doing the export+import on my laptop for now to reduce the number of variables in the problem.)

I go with the assumption that you now know how to create transport sets. After having created a transport set containing the objects you want to be exported, go to the administer tab under the main page of portal. There you will find the Export/Import portlet. Here you need to choose your transport set from the first LOV and then click EDIT to choose the "Security Option". Now you export out the stuff. This will export all the user page customizations for you.
Thanks.

Solution Manager -- Export Import Project

Hi,
I want to import a project from SolMan 7.00 to SolMan 7.00 EHP1, but I can´t find an option to do it.
As I know I have to create an Implementation Project in tx SOLAR_PROJECT_ADMIN and then import the implementation projects that already exists.
Any clue?

Hi Jorge,
In reply to your previous post you need to take the 3 files saved locally and copy them:
The K-file have to be copied into the /usr/sap/trans/cofiles directory and the R- and I-file into /usr/sap/trans/data.
The documents are in a transport request dump that you can access in the normal manner.
With regards to the structure in SOLAR01, first make sure you are in the correct project by switching the project using the icon at the top.
At the export and import stage, make sure you have ticked documents and structure so this is transported across.
Finally check your transport request has completed successfully without errors.
Regards,
-Rohan

Exporting/Importing projects without Aperture?

Rather than wait for Aperture to export a project, why not just use finder to copy it?
I am doing that now.
I right clicked on my Aperture library, Show package contents, and browsed to a location of a folder of projects(14 GB worth)
Dragged that to a Lacie FW800 external disk.
Unplugged it from the G5 DP 2 Ghz, plugged it into the MBP, fired up Aperture, created a top level folder, selected the folder and then chose "Import Projects".
Browsed to the external drive, into the folder, selected all 9 projects and let it rip...
Next test will be to merely copy a project into the library.

Thanks for the info!
A green star for your efforts!
I am about to hit the road on our summer family vacation, but still have a bunch of projects I still need to triple-C ... cull, crop, correct and since I have proven the MBP is very capable, I decided to spend the 10 hours of drive time productive! So while my wife is driving I will be editing away and when we arrive at our hotel I should have 3-4 projects ready to export previews and upload!
BTW, I will be testing the only power inverter that Apple recommends, the Kensington Ultra Portable Power Inverter 150 (or so the Apple store claims:It's also the only product other than an Apple power adapter that you can use to charge MacBook and MacBook Pro notebooks.Now if I could just get wireless internet access while driving....

WIll I have duplicate problems when I Export / Import Project?

This is my first try at Exporting / Importing a Project to benefit from having Aperture on the road on a MacBook.
I run a secondary instance of Aperture on my MacBook with a managed library. I used it last week to rate, and adjust 40 images from a shoot while on the road. Those images are in Project ABC. My objective is to not lose all the adjustment work done while away now that I wish to re-locate these images to my primary instance of Aperture which runs on an iMac. I won't need them any longer on the MacBook.
I've exported Project ABC, and it's now sitting on the desktop of the iMac ready for import into Aperture where the library is also managed.
Between the shoot and today, however, I had uploaded the same images from my CF card to the iMac's Aperture library into Project XYZ. No work has been performed on any of them, but the image names are identical to those in Project ABC waiting to be imported.
My plan is to import Project ABC, and, assuming everything comes over in good shape, to delete the unadjusted masters/versions in Project XYZ one by one.
Question 1: When image GEN_1234.nef with all its adjustments, etc., contained in Project ABC, is imported, will Aperture have a problem that GEN_1234.nef (unadjusted) already is in the library in Project XYZ?
Question 2: I've checked the MacBook after exporting, and Project ABC looks as though nothing ever happened. Does this sound right? I'd expected the Masters to be gone, but "M" toggles between the master and the adjusted version.
Thanks.
Terry

Problem #2 is not a problem. We have been able to somewhat install Oracle when those warnings appear. The client install works fine with those warning messages in the terminal window. NOTE: They are just warnings...

Export/Import Project problems

I have two machines: a PowerMac (G5) and a MacBook Pro (Intel Dual Core). Both 2GB RAM, running OS X v10.5.6 and Aperture 2.1.2. (More tech spec info available if anyone thinks it relevant).
I have built up a project on the MacBook Pro, creating albums, creating stacks and making picks within the stacks, making adjustments to each of the picks and then creating a book.
I now want the project on the PowerMac G5, which is my master machine and contains all my other projects.
On the MacBook Pro I exported the project and then copied the resulting .approject file to the PowerMac. I then imported the project into Aperture from there. On a cursory scan, everything seems fine and in the Projects Inspector it shows 1376 images against the project on both machines. However, if I look more closely, I've lost all my picks. I.e. I need to go through every stack again and reselect my picks (very boring).
It gets worse when I look at the Book within the project - it's lost the positionings (i.e. I double clicked on the image and moved it around slightly to get the best crop for the selected box shape). And then I did a Close All Stacks and it deleted every picture from the book so all 60 pages were empty again and the images were all back down in the film strip!
At this point, my immediate thought was the .approject file got corrupted during the copy, but I've done a recursive diff (diff -qr fileA fileB) between the file on the MacBook Pro and the file on the PowerMac and it reported no differences at all.
Has anybody else had similar problems? Is the project import/export known to be flakey? Better yet, anybody know of any workarounds?
Thanks in advance for any help anyone can offer.
Darren

OK - I've tried eliminating some of the variables and it turns out the two-machines-issue is a bit of a red herring and this is a straightforward Export/Import bug in Aperture.
On a single machine (2.16GHz Intel Core Duo MacBook Pro with 2GB RAM, running OS X 10.5.6 and Aperture 2.1.2 (build 3G13)) I have a project with many images. I create versions of these images and apply adjustments (Sharpness, Monochrome Mixer, Exposure, Enhance, etc.). I then make the adjusted version the Pick and I've created a 62 page book from these Picks.
Now I export the project (i.e. in the Project Inspector I right-click the project and choose Export > Project). I export the project to a file on the desktop and rename the existing project in Aperture. I now import the saved .approject file and I find that all my (long and carefully chosen) Picks are no longer Picks. (I've tried this a few times and ruled out the possibility of a corrupt export file).
As a result, when I select the Book I get the "Non-Pick Images" dialog with the dreaded "One or more placed items are no longer the pick of a stack." message.
I have two options at this point: "Use Current Pick" ruins the book - I have to go through and work out all the picks again (and also re-pan all the images within the Photo Boxes as this data has also been lost).
Or I can choose "Create new Version", which appears to preserve my book's original look (I haven't looked in too much detail yet), but my project now contains a couple of hundred more images than it used to (or at least extra versions which, whilst I know these are relatively 'cheap', are still unnecessary) and this still doesn't help with my other albums and light tables, which still have incorrect images shown as the Picks.
I'm finding this quite a worry - I originally hesitated to move my photo library into Aperture due to the thought of losing the metadata one day if I moved from Aperture to something else, but in the end I decided to trust that something as simple-to-test as Export/Import would get properly implemented - now I'm beginning to fear that it doesn't even within the same version of Aperture, never mind different versions of Aperture or (heaven forbid) different applications altogether

Is there any tool that export/imports db schema in xml?

Hi all,
Do you know if there is a open soource library/tool that exports the schema of a database in a xml formatted file and then imports it back?
Could you please suggest me one?
thank you in advance, Kostas

What advantage is there to exporting it in XML? What does that buy you? Why isn't importing/exporting the SQL enough? All databases don't treat SQL the same, let alone an XML definition.
Not sure what you're getting at here.
Hibernate can create a database schema from an object model, given the right annotations, using XDoclet. It also helps with portability, because it "knows" about the common database dialects.
Maybe you need to learn Hibernate.
%

Export/import of mappings using OMBPLUS and Collections?

Hi,
We've got some good TCL code to export (and import) mappings for our projects along the lines of:
OMBEXPORT MDL_FILE '$projname.mdl' \
PROJECT '$projname' \
CONTROL_FILE '$controlfile.txt' \
OUTPUT LOG '$projname.log'
and now we're moving to organizing mappings by OWB COLLECTION and need to export/import by collection instead. Thought it might be as simple as this:
OMBEXPORT MDL_FILE '$collname.mdl' \
FROM COMPONENTS ( COLLECTION '$collname')
CONTROL_FILE '$controlfile.txt' \
but that's not working (saying "Project $collname does not exist.", so it seems to still be treating what I thought was a collection name as a project name . Can someone point out the right syntax to use COLLECTIONs in OMBEXPORT/OMBIMPORT?
All thoughts/tips appreciated...
Thanks,
Jim C.

Hi,
If we use the below tcl script for the entire project export , does it also export the locaitons,control center,configurations along???
If yes then can you gimme the script for altering the locations , control center/configuration connection details??
OMBEXPORT MDL_FILE '$projname.mdl' \
PROJECT '$projname' \
CONTROL_FILE '$controlfile.txt' \
OUTPUT LOG '$projname.log'
Can you also provide me the tcl for project import??
Thanks

Problems while compiling a project that uses Database Adapter

Hi,
I am working on a small WebService that uses the Database Adapter to connect with the Oracle-Lite database. The process is a synchronous process which has client and DatabaseService as the partner link. The goal of this project is to get two inputs from the user and send it over to the DatabaseService for it to select the rows from the table based on the inputs sent. The process activity has an invoke function which had two varibles Invoke_1_inputVarible and Invoke_1_outputVarible. I have included the *.xds that contains the database schema. When I compile the project i get the following error
Error(38): [Error ORABPEL-10035]: wrong messageType [Description]: in line 38 of "D:\OraBPELPM_2\integration\jdev\jdev\mywork\Workspace1\Login\Login.bpel", messageType "{http://xmlns.oracle.com/pcbpel/adapter/db/ds/}EmployeeRole_msg" of variable "Invoke_1_dsSelect_InputVariable" does not match the expected messageType "{http://xmlns.oracle.com/pcbpel/adapter/db/ds/}dsSelect_inparameters" in <invoke>. [Potential fix]: make sure the correct variable is used in invoke.
My question is how do I assign correct messageType for the variables.
XSD File:
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login" elementFormDefault="unqualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="EmployeeRoleCollection" type="EmployeeRoleCollection"/>
<xs:element name="EmployeeRole" type="EmployeeRole"/>
<xs:complexType name="EmployeeRoleCollection">
<xs:sequence>
<xs:element name="EmployeeRole" type="EmployeeRole" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="EmployeeRole">
<xs:sequence>
<xs:element name="empid" type="xs:decimal" minOccurs="0" nillable="true"/>
<xs:element name="password" type="xs:string" minOccurs="0" nillable="true"/>
<xs:element name="role" type="xs:string" minOccurs="0" nillable="true"/>
<xs:element name="uid" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:element name="findAllInputParameters" type="findAll"/>
<xs:complexType name="findAll">
<xs:sequence/>
</xs:complexType>
<xs:element name="dsSelectInputParameters" type="dsSelect"/>
<xs:complexType name="dsSelect">
<xs:sequence/>
</xs:complexType>
</xs:schema>
DatabaseService.wsdl
<?xml version="1.0" encoding="UTF-8"?>
<definitions
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login"
schemaLocation="EmployeeRole_table.xsd"/>
</schema>
</types>
<message name="EmployeeRoleCollection_msg">
<part name="EmployeeRoleCollection" element="top:EmployeeRoleCollection"/>
</message>
<message name="dsSelect_inparameters">
<part name="dsSelect_inparameters" element="top:dsSelectInputParameters"/>
</message>
<message name="EmployeeRole_msg">
<part name="EmployeeRole" element="top:EmployeeRole"/>
</message>
<portType name="ds_ptt">
<operation name="dsSelect">
<input message="tns:dsSelect_inparameters"/>
<output message="tns:EmployeeRoleCollection_msg"/>
</operation>
<operation name="queryByExample">
<input message="tns:EmployeeRole_msg"/>
<output message="tns:EmployeeRoleCollection_msg"/>
</operation>
</portType>
<binding name="ds_binding" type="tns:ds_ptt">
</binding>
<service name="ds">
<port name="ds_pt" binding="tns:ds_binding">
<jca:address location="eis/DB/BPELSamples"
/>
</port>
</service>
</definitions>
<b>Login.bpel</b>
<process name="Login" targetNamespace="http://xmlns.oracle.com/Login" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/ds/" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/db/top/Login" xmlns:client="http://xmlns.oracle.com/Login" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
<partnerLinks>
<partnerLink name="client" partnerLinkType="client:Login" myRole="LoginProvider"/>
<partnerLink name="PartnerLink_1" partnerRole="ds_role" partnerLinkType="ns1:ds_plt"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:LoginRequestMessage"/>
<variable name="outputVariable" messageType="client:LoginResponseMessage"/>
<variable name="Invoke_1_dsSelect_InputVariable" messageType="ns1:EmployeeRole_msg"/>
<variable name="Invoke_1_dsSelect_OutputVariable" messageType="ns1:EmployeeRoleCollection_msg"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="client" portType="client:Login" operation="process" variable="inputVariable" createInstance="yes"/>
<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"/>
<to variable="Invoke_1_dsSelect_InputVariable" query="/ns2:EmployeeRole"/>
</copy>
</assign>
<invoke name="Invoke_1" partnerLink="PartnerLink_1" portType="ns1:ds_ptt" operation="dsSelect" inputVariable="Invoke_1_dsSelect_InputVariable" outputVariable="Invoke_1_dsSelect_OutputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_dsSelect_OutputVariable" part="EmployeeRoleCollection"/>
<to variable="outputVariable" part="payload"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:Login" operation="process" variable="outputVariable"/>
</sequence>
</process>
Thanks,
Niv

Help! SOS....
Niv

How to archive a Java project that uses an Oracle XE DB?

Hi,
As the title suggests, I have a small Java application that uses Oracle XE as the database. Now that I have finished working on the application, I want to archive it and email it to friends and coworkers to test it. However, I know that none of these people have any database software installed. I also can't have them connect remotely to the one on my development machine.
Is there any way to include the database in my application archive, so that all they have to do is run the application without worrying about its back-end? Should I use another back-end?
Any help is appreciated.
Thanks

Unless your database server is on a remote machine that they can connect to then you can't package the WHOLE DATABASE, software and all and send it via e-mail.
You can package your application, and also export the contents of your database into a .dmp file and send that.
The user will NEED Oracle software then to import the contents of your .dmp file.

Import MXF (P2) using XML

I have hand-coded an XML document to use when importing clips.
When the target clip is a .mov file, it works just fine.
However, when the target clip is an MXF file, it creates a clip in the bin, and properly names it, but it fails to connect to the video file.
I have pored over Apple's developer documentation, but I can find no way to tell Final Cut that it is dealing with an MXF video file and, therefore, must use its "Import P2" function.
Has anyone been able to automate P2 (or any other MXF) import using XML?
G5 Dual 2GHz Mac OS X (10.4.8) 2.5GB RAM

I have hand-coded an XML document to use when
importing clips.
When the target clip is a .mov file, it works
just fine.
However, when the target clip is an MXF file,
it creates a clip in the bin, and properly names it,
but it fails to connect to the video file.
I have pored over Apple's developer documentation,
but I can find no way to tell Final Cut that it is
dealing with an MXF video file and, therefore, must
use its "Import P2" function.
Has anyone been able to automate P2 (or any other
MXF) import using XML?
G5 Dual 2GHz Mac
OS X (10.4.8) 2.5GB RAM
P2 Log by Imagine Software will do this. I use it for review, logging & XML import to FCP.
Kind Regards,
Charles
PowerBook 17", PowerMac DP-2GHz & Quad Core 2.5 Mac OS X (10.4.3)

OIA - Importing nested entitlements using XML file

Hi,
I am looking for some information on importing nested entitlements (like RACF information) into OIA. From what I gather sofar, looks like I have to use XML to import nested entitlements. But sofar, I have no luck finding any documentation on how to go about it.
If anybody has any information that you can share, that would be great.
Thank you
-Kamal

If you're saying that you have Reader 9 and Acrobat Pro 7 on the same machine, please be aware that this is not a recommended or supported configuration. Although it's possible, people have reported a number of problems with such a setup.
George

Smart export/import - unable to import project that uses 'xml' technology

Similar Messages

Maybe you are looking for