Smart folder can't show recent folder correctly

Hi all,
I would like to quickly view/select the recently opened folders in finder but I can't really find any efficient ways to do it.
Finder->Go->Recent folders does show what I need, but limited to 10, and it's not convenient to click.
I tried to setup smart folder with "show folder only" and use raw query "kMDItemLastUsedDate >= $time.today(-2)". I suppose this should be simple but it didn't work well.
My finder shows files in column view, and Finder->Go->Recent folders always reflect what it should be, but the smart folder method just won't give me the folder I navigated, but sometimes show up folder I didn't actually opened (perhaps by other program, but these won't appear in Finder->Go->Recent folders).
Any one has ideas on this?
I will be very grateful if anyone can help.
Jake
PS: Default folder X is good, but I don't usually work in the open-save dialog style when working with files. Also finder shows the recent folders by alphabetical order but not ordering by time, which is kind of annoying..

hinagate,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

  • How can I show my view correctly  after interlization?

    hi, everybody
           In my project , we need interlization(for example:English and Chinese). But after interlizating the view , I built and deployed the project in the "Development Configuration Perspective". When I ran the project, in the view, some place showed Chinese, and some place still showed English.I don't know why it happened.Would you please give me a help?

    Hi,
    Check the following.
    Create new .xlf for en_xlf and ch_xlf and add your new language text in that Editor and those xlf files are generated .properties files are not check those and finally reload the application.
    Then deploy and run the application.
    Change ur browser first language which one do u want like en of chainess.
    it will wotk
    thanks,
    Lohi.

  • Apple loops for garageband pack doesn't show the folder content (loops, files...)  in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

    apple loops for garageband pack doesn't show the folder content (loops, files...)  in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

    Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

  • How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

  • I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images that should be inside the folder, as well as

    I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
    that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto:  "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?

    iPhoto 08?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • Can't Store Files in correct folder when Tethering in Aperture 2

    Hi everyone,
    I've been using Aperture 2 for two years now tether shooting with a Nikon D300 with no major problems with only minor problems along the way.
    I'm now having problems when tethering storing my particular files in its designated folder. I have all my projects organized and referenced folders that mirror how my projects are organize. Its just one particular project and now I can not store file in its designated folder. When starting to tether, I can choose the correct project and from the Store Files drop down box, the designated folder is grayed out and I can't select the folder I want the images to store in.
    If I select "Choose" from the drop down box, and then select the designated folder, Aperture selects the next folder down on the Store Files drop down box. It just started happening. I can correct the files location in Finder but thats just a nuisance. Its just this one folder thats giving me problems.
    Any help would be appreciated? thx
    fotokoto

    Hi ana:
    You might try indexing the external HD and see what happens:
    http://docs.info.apple.com/article.html?artnum=301562
    Barry

  • Why the lens profile list can't show ALL lens profiles items from "LensProfiles 1.0" folder?

    When I add a new lens profile - Samyang 14mm f2.8 - .lcp file into the "LensProfiles > 1.0" folder, I appear there are many lens profile items can't show in the Lightroom lens profiles list.
    Please tell me how can I add these items into the LR lens profiles list........... thanks!!!

    Sorry my bad, should have put.
    Your custom Camera Raw & Lens Profiles should be installed to the User folders…
    Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
    When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
    For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
    The camera and lens profile file extensions are:
    .dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
    .dcp—camera profile
    .lcp—lens profile

  • Iphoto will not save photo in most recent folder

    I have having trouble with the new iPhoto 9.3   When I import a photo, it will not go to my most recent folder.   It only goes to the library section.   I have called Apple support twice and have gone through the lengthy steps of dumping iPhoto files from my library, and then rebuilding everything.   It takes the 4th option, rebuild data base to make it work again.   However, that only lasts for one day.   The next time I open iPhote, it is back to the same way.   I spent an hour on the phone last night, I certainly do know how to do it now, but what is the point, when it will just happen again?   Is anyone else having this problem with the new update.   It is driving me crazy.   I am not going to bother fixilng it again if it just lasts one day.   I want a permanent fix.   Help

    I mean in my folder that says last 18 months--under the Recent heading.   In the library section the photos are shown in both photos and events.   The dates on my camera are correct.   I have called Apple care and we have repaired this twice.   First I have to find my library (hidden under the GO heading.) Then go to library, dump the cache and everything with iphoto in the title.   Close iPhoto.   Then hold option and command at the same time and click on iPhoto.  It will open with a box with 4 things that can be done to rebuild or restore.   The 4th one is the one that works--do not rebuild the snapshots--that takes forever!!   Anyway, this works --for about 24 hours, then it reverts back.   This all started with the update to 9.3.   Two other problems.   If I send a photo through iPhoto, and I type anything with it, the typing shows up on the photo and is almost impossible to read.   Got that info back from the person I wrote to.   And my photos that I put in the photo stream have disappeared, all but 3.   They still are in the photo stream on my iPad and my husband's computer (not with updated iPhoto--I said do not do this.)   So, I could fix this again, but what is the point?   It takes forever and does not last.   I think we need a software correction of some kind for iPhoto 9.3.   Is anyone else having this problem?

  • Junk Mail folder refusing to show messages from a particular account

    So, I have a weird problem with Leopard Mail (3.2) - when I click on the junk mail folder, 99% of the time it won't show messages from my Yahoo POP account. The only way I can get messages from this account to show is by expanding the junk mail folder, clicking on a different sub-account, then clicking on my Yahoo account. This will show the messages in its junk folder, and if I click on the combined junk folder they will show up inside it. This will work until I click away from junk - say, to my inbox - at which point the procedure will need to be repeated if I wish to see my Yahoo junk mail.
    I've only noticed it very recently, but I'm not sure how long it's been going on. Unbelievably annoying. I deleted the junk folder, no luck. I toggled the account off/on - this seemed to work for a day, but the behaviour's back and I can't make this work again. I rebuilt the mailbox... Even deleted and added the account again, but it still did the same thing.
    Has anyone else experienced this? Is it just a bug in Leopard Mail? Something specifically with POP accounts, perhaps? (My 5 IMAP accounts seem fine). If anyone has any further suggestions I'd be really, really grateful.

    Ok, so, something in way of an update: Normal behaviour appears to be restored after Mail detects a piece of junk mail and puts it in the junk folder for this account (manual marking of junk doesn't do the trick). Then it works ok until I quit Mail.

  • Chromium "Show in folder" option doesn't work in most cases

    I have a stupid issue in Chromium for a while (it hasn't been there for always). I use Openbox as a standalone WM without any DE, and I Thunar as FM. When I start Chromium from the OB menu or by typing Alt-F2 with gm-run, I'm unable to open the containing folder after a download. No warnings. But, on the other hand, when I type chromium from the console, "Show in folder" works like a charm.
    Anybody can offer som help, or at least tell me how can I debug the program so I can find the error?
    Thanks!

    It might be a XDG issue.  This is how I fixed it:
    $ which xdg-open
    /usr/bin/xdg-open
    $ sudo nano /usr/bin/xdg-open
    Go down towards the bottom and change this section,
    generic)
    open_generic "$url"
    to look like this,
    generic)
    thunar "$url"
    Keep in mind that this probably not the appropriate way of correcting this issue, but it works.  You might want to backup /usr/bin/xdg-open before modifying it.
    Last edited by archyblue (2011-02-03 13:47:15)

  • Mail shows no folder location in the All Mail list

    This is a Classic View for Mail - All Mail
    You see to the right the Mailbox column. It shows All Mail instead of showing the folder location of the mails
    How can I make Mail to show folder location ?

    All Mail isn't a Mail mailbox. It is a Gmail Label/folder/mailbox. It has nothing to do with Mail.
    You haven't seemed to comprehend what we have been telling you and what is stated in the multitude of links we have provided.
    If you want an "All Mail" folder in Mail, Create a Smart Mailbox which has the criteria:
    Date Received is after <some date well before all of your email>
    Check the boxes to include Sent and Trash if that is what you want to include.
    Ok, now hold on because you brain is about to explode.
    A Smart Mailbox does not move any emails. It does a search of all your messages and lists the ones that meet the criteria you set. Again, NONE of the email is MOVED or COPIED.

  • I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ? or can you run both versions on OS10.9.5 ?

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ?
    thanks,

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • On start up my mac is showing a folder and flashing question mark sign?

    On start up my mac shows a folder sign & flashing question mark?? Help and Why??

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Bug with "Show Constant Folding" in LV 8.2

    The attached picture shows where the problem is : LV thinks that the inside nested loop generates a constant.
    The vi must be run twice to generate a proper result. The first run always generates an array with a column number corresponding to the previous value of Numeric
    Workaround : carefull with the new show option () and wait for the next version...
    Message Edité par chilly charly le 09-01-2006 10:19 PM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Bug Show Constant Folding.png ‏20 KB

    From what I can tell, you cannot disable constant folding. You can only decide to either show or hide the hash marks that indicate folding.
    Some observations:
    The result is correct of you replace the control with a diagram constant.
    The behavior is correct if you wire both N to the control instead of relaying throught the outer N (Image top).
    The only real use to wire from inside the N is in cases where the outer loop count is determined by autoindexing only. In this scenario the bug shows again (image bottom).
    Message Edited by altenbach on 09-01-2006 06:20 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    FoldingBug.png ‏8 KB

Maybe you are looking for