SMART FORM AND PIE CHART
thanks for ur reply ,
my req. to get a picture of pie chart in Smart Form .
am doing
1) write a pie chat program using the dynamic data .
2) convert into bmp and upload into se78
3) read the pic in smart form .
is there any other better way
can u mention the class n method
its urgent
Am getting short dump
DATA : D TYPE GFW_EXP_DATA,
R TYPE SYMSGNO.
DATA: S TYPE STRING,
N TYPE I, gp_inst type ref to cl_gui_gp_pres.
CALL METHOD GP_INST->IF_GRAPHIC_PROXY~EXPORT
EXPORTING
FORMAT =
IF_GRAPHIC_PROXY=>co_format_bmp
WIDTH = 50
HEIGHT = 200
NAME =
IMPORTING
CONTENT_TYPE = S
CONTENT_LENGTH = N
CONTENT = D
RETVAL = R
A RAISE statement in the program "SAPLCNDP " raised the exception
condition "DP_ERROR_GET_DATA".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
cheers
senthil
Hi Kai,
Thanks a lot for your reply. The note 584593 has already been implemented.
Program is calling the following statement.
elseif format = if_graphic_proxy=>co_format_bmp.
call method adapt_classref->call_method
exporting method = 'SaveImage'
p1 = 1 " save as bmp
p2 = name
p_count = 2.
endif.
But it's not creating the file.
I would really appreciate your help. Let me know if you have any suggestions.
Thanks.
B. Shah
Similar Messages
-
How to get the PO no in the smart form and in the print program from ME23N
hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa -
Difference between Smart Forms and Adobe Form
Hi all,
What are disadvantages of Smart form in SAP ,
What is difference between Smart Forms and Adobe interactive Form.
I heard from someone that in future Adobe interactive Form will repalce smart forms. Is it true or not
Best Regards
SrikanthHi,
Companies depend on formal documents that reflect their corporate identities and contain critical business information from live systems. SAP and Adobe partnered for automating and streamlining forms-based communication to support customers who create reusable forms for their business processes.
SAP Interactive Forms by Adobe will be used more and more as a way of simplifying and automating manual processes.
There are various advantages of Adobe forms.
SAP Interactive Forms by Adobe provides all the features and functions you need to create form-based output, such as order confirmations, invoices, or pay slips. You can either print such documents or send them by email or FAX.
<b>Online Interactive Forms</b>
A user logs on to the company intranet to fill in a form required by the HR department (for example, a Non-Disclosure Agreement to be signed by a new employee). The form is displayed in the browser.
As the user is logged on in the background to the company's HR system, his master data is displayed in the form. The user enters the required information in the fillable fields of the interactive form, and sends the data back to the system by pushing a button. The system extracts the data from the form and saves it in the database.
<b>Offline Interactive Forms</b>
The purchasing department of a company creates a bid in its Enterprise Resource Planning (ERP) system and selects the potential vendors. Based upon this data, the system automatically creates interactive bidding forms with specific vendor information, such as the address or contact person.
The forms are transmitted to the vendors by email. The vendors can fill out the forms offline (without being connected to the system that created the forms) and transmit them back to the company. The company then processes the forms automatically, and the data provided by the vendors is written to the ERP system. The purchasing department uses the data to evaluate the quotation and then issues an order.
<b>With the integration of Adobe PDF technology into its solutions, SAP will be able to further extend its offerings of end-to-end business solutions by:</b>
Providing for the first time the capabilities of Adobe's interactive PDF-based forms.
Integrating PDF documents into business processes that are driven by SAP applications.
Automating the process of moving XML data from SAP applications into interactive forms and vice versa.
Reducing time to design, manage, and maintain extended forms-based processes through easy-to-use forms design and deployment tools.
Offering its customers enhanced printing capabilities, in particular for interactive Web applications.
The focus of new forms technology from SAP is interactive PDF-based forms that can be created in SAP systems as a result of the <b>integration of Adobe technology with Web Dynpro and the SAP NetWeaver Developer Studio.</b> This integration means that adobe is the future technology.
Regards,
Kate -
Bar and Pie chart display with values
Hi All...
I want implement the my swing application Bar and Pie chart functionality with vales, If both are disply same veues.
Thanx to Advance
Arjunwww.jfree.org
-
Plot line, bar and pie chart
Anyone can let me know where can i learn or tutorial on how to plot line, bar and pie chart by using java2D... (no third-party software)....
thanks in advance.Here's a pie chart app I made for an earlier question:
import java.awt.*;
import java.awt.font.*;
import java.awt.geom.*;
import javax.swing.*;
public class PieChart {
public static void main(String[] args) {
int[] data = {
18, 95, 102, 87
PieCharter pie = new PieCharter();
pie.enterData(data);
JFrame f = new JFrame("Pie Chart");
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(pie);
f.setSize(400,300);
f.setLocation(300,300);
f.setVisible(true);
class PieCharter extends JPanel {
int[] data, percents;
int dataTotal;
final int
PAD = 25,
R_PAD = 5;
public PieCharter() {
setBackground(Color.white);
public void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
Font font = new Font("lucida sans unicode", Font.PLAIN, 16);
g2.setFont(font);
FontRenderContext frc = g2.getFontRenderContext();
int width = getWidth();
int height = getHeight();
int cx = width/2;
int cy = height/2;
int dia = (int)Math.min(width, height) - 2*PAD;
g2.draw(new Ellipse2D.Double((width - dia)/2, (height - dia)/2, dia, dia));
// draw zero datum
double radians = 0;
int x = cx + (int)((dia/2) * Math.cos(radians));
int y = cy - (int)((dia/2) * Math.sin(radians));
g2.draw(new Line2D.Double(cx, cy, x, y));
String s;
int dataWidth, dataHeight, deltaR, rXInc, rYInc;
for(int i = 0; i < data.length; i++) {
radians += 2*Math.PI * data/dataTotal;
x = cx + (int)((dia/2) * Math.cos(radians));
y = cy - (int)((dia/2) * Math.sin(radians));
g2.draw(new Line2D.Double(cx, cy, x, y));
s = String.valueOf(percents[i]) + "%";
dataWidth = (int)font.getStringBounds(s, frc).getWidth();
dataHeight = (int)font.getLineMetrics(s, frc).getAscent();
deltaR = (int)Math.sqrt(dataWidth*dataWidth + dataHeight*dataHeight)/2 + R_PAD;
rXInc = (int)(deltaR * Math.cos(radians));
rYInc = (int)(deltaR * Math.sin(radians));
x += rXInc;
y -= rYInc;
x -= dataWidth/2;
y += dataHeight/2;
g2.drawString(s, x, y);
s = String.valueOf(data[i]);
dataWidth = (int)font.getStringBounds(s, frc).getWidth();
dataHeight = (int)font.getLineMetrics(s, frc).getAscent();
x = cx + (int)((dia/4) * Math.cos(radians - 2*Math.PI * data[i]/(2*dataTotal)));
y = cy - (int)((dia/4) * Math.sin(radians - 2*Math.PI * data[i]/(2*dataTotal)));
x -= dataWidth/2;
y += dataHeight/2;
g2.drawString(s, x, y);
private void prepareData() {
for(int i = 0; i < data.length; i++)
dataTotal += data[i];
percents = new int[data.length];
int dataPlus = 0;
for(int i = 0; i < data.length; i++) {
dataPlus += data[i];
percents[i] = Math.round(100 * dataPlus/dataTotal);
public void enterData(int[] data) {
this.data = data;
prepareData();
repaint(); -
Hi!
In My application i want to create few bar and pie chart.
If is there any code for generating bar and pie chart,
pl send me.
If third party software is available tell me the details of it.Sure, this functionality would be nice to have right
out of the box, but when you think about it: should
Sun be distributing a reporting SDK and promoting bad
practices anyhow? Implementing your reporting in
disparate and distributed manners is just plain messy
and definitely translates to a bad practice. Turning
to a centralized reporting mechanism, driven by a
reporting server that can handle the needs for 80% of
your requirements is a helluva lot more thoughtful and
mindful than implementing separate mini reporting
engines encapsulated within each and every application
that you deploy.Elegantly stated! On a practical point, my company built an Enterprised based reporting solution on top of Java technology within the windows environment (please be kind). Specifically we used Java, ASP and Javascript (no VBScript), and delivered the information using the Microsoft IE 4 and 5.
However, since Microsoft chose to elminate Java from it's current browser (IE6), we have to throw two years of coding away. We are now in the process of moving backward (technically speaking) to a desktop reporting model using Java (no browser technology) that accesses an Enterprise database, or embedded Java database. None of our customers are using Netscape, so that was never an option. Microsoft's and Sun's inablity to cooperate almost decimated our company's product line (and it still may).
So I agree with you that an Enterprise server based reporting solution is the best architecture, and yet here I am running away from it after a two year struggle with competing standards. Sometimes the best solution loses for reasons that are simply not technical in nature. -
Bar chart and pie chart in same screen at a time
hi experts,
I am trying to display the bar chart and pie chart in two separate containers in same screen .I wrote code for this in PBO of screen by using the function module GFW_PRES_SHOW , but it is showing one chart at a time which is lastly executed in the PBO.
I need to display two charts in two container at a time by calling the same function modules two times first time for bar chart second time for pie chart by changing the parameter
presentation_type = 1 for bar chart
presentation_type = 31 for pie chart.
please help me in this regard asap.
Thanks,
K.Rajesh.Hi..
Instead of using the FMs .. you should use the Object oriented approach for the same.
Brief steps:
You should have 2 control areas and 2 containers.
Define different instances of 2 controls and attach them to the 2 containers.
Call individual methods to display the controls in PBO.
This should show both at a time. It is really simple.
As an example you can go to SE38. From the (sap) menu go to Environment -> Examples -> Control Examples.
Here you will see lot of examples.
Regards,
Varun. -
Copying Graphs and Pie Charts generated in Analysis View to Email item using Excel VBA Macro Code
Hi
I am currently working on an exce VBA macro code that would help me take snapshots of the Graphs and Pie charts generated in QC for a particular application and copy the same to an email item using excel VBA macro code.
I was able to write the code to create an email item. But I have no clue of how i can take snapshot of the graphs in Analysis View using excel VBA
Any help would be highly appreciated.
Thanks in Advance
Regards
Amituseramit,
You are in the consumer end products forum. You will also want to ask your question over at the Enterprise Business Community.
Click the plus sign (+) next to Discussion Boards to drop down all the options for servers, networking and any other professionally related problems.
http://h30499.www3.hp.com/ -
Regarding Smart form and Script
Hi.
Can anybody send Full screen short of Smart Form And Script.
Thanks And Regards
Gulo.Hi Golu singh,
Pleasae check this link
Tutorials on SAP Script/Smart Forms
http://www.****************/Tutorials/Smartforms/SFMain.htm
SAP SmartForms explained step by step including Table display .
http://sap.niraj.tripod.com/id67.html
SMARTFORMS
[Step br Step Tutorial to create Smartform|http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html]
Best regards,
raam -
Am using a standard smart form and a corresponding program.
hi
i am using a standard smart form and a corresponding program. i did evry possible thing but it is not executing..where could be the error.?
can any1 suggestHi,
Dude..!
you told that you created form and corresponding print program also....!
but you didn't mentioned what it is..! in the sense to which module..!
are you changing any standard form or what..! be clear while raising issue..! so that you can get your issue cleared..
and you have to assign your form and corresponding print program in NACE transaction for the given output type.
Thanks & regards,
Sasi Kanth. -
hi,,
will u tell what is the difference between smart forms and scripts.hI
Sapscripts are client dependend and smartforms are client independet.
SAPscript are CLient Dependent, SmartForms are Client Independent. The reason why SmartForms are client independent is because when you activate a SMartForm, SAP actually generates a Function Module (which as you know is client independent). The Print Program (or as SAP likes to refer to them these days - Application Program) calls your generated FM.
In the "smartforms" transaction, when you are viewing a smartform, you can go to the Environment->Function Module Name menu path to see the FM name.
Look at the "Application Program" for the Invoice SmartForm (RLB_INVOICE):
determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = lf_formname
variant = ' '
direct_call = ' '
IMPORTING fm_name = lf_fm_name
EXCEPTIONS no_form = 1
no_function_module = 2
OTHERS = 3.
call smartform invoice
CALL FUNCTION lf_fm_name
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_appl_obj =
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = space
is_bil_invoice = ls_bil_invoice
is_nast = nast
is_repeat = repeat
importing document_output_info =
job_output_info =
job_output_options =
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
<b>Difference with SMARTFORMS vs. SapScript (SE71)</b>
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated.
Contributed by : SAP ABAP/4 Programming, Basis Administration, Configuration Hints and Tips
f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format. In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment.
In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to create a Transport and then FTP down to your local harddisk. When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
i) The main difference is that SAP script is client-dependant, while smartform is independent. Also there are some advanced and intreractive features available in smartforms.
You can use an External subroutine-call in sapscript editor like:
/: perform <form_name> in program <program_name>
/: using <var1>
/: using <var2>
/: changing <return1>
/: changing <return2>
/:endperform -
Crating bar graphs and pie charts
hi every body
in my application there is a need of bar graphs and pie charts can any body help me how to draw themtry http://www.jfree.org/jfreechart/
-
What is the difference between smart forms and scripts.?
what is the difference between smart forms and scripts.?
Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful. -
Purchase order smart forms and scripts
i need to create a smart form and script in simple purchase order there is no requirements has given to me, can any one tell me in detail how i need to do and what are the procedures i need to follow, example code will be usefull and steps to build it.
Hi,
Go through the links mentioned below.
http://www.****************/Tutorials/Smartforms/SFMain.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
http://www.sapmaterial.com/smartform_example.html
Re: Hands on SAP Smart Forms
smartforms
A Simple Smartform Tutorial
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Additional Fonts for your SMARTFORMS
You can create additional fonts and style with transaction SMARTSTYLES
This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form.
The character formats includes effects such as superscript, subscript, barcode and font attributes.
Also, you can refer to the below link for the explanation:
http://help.sap.com/saphelp_46c/helpdata/en/4b/83fb42df8f11d3969700a0c930660b/frameset.htm
Reward if helpful.
Regards,
Harini.S -
Hi Friends.
How r u?
This is Ravinder.
what r the problems does I get when we generating the layout for checks using smart forms and scripts(also)? There is standard programs r there plz tell me? Plz give an exampleHi Friends.
How r u?
This is Ravinder.
what r the problems does I get when we generating the layout for checks using smart forms and scripts(also)? There is standard programs r there plz tell me? Plz give an example
Maybe you are looking for
-
Default value of quality inspection
Hi all when you enter a goods receipt against a purchase order. and a Quality Inspection is suggested as the stock type. Where does this default value come from? Thanks
-
How To display Project Information In Infopath Form Field On Form Load Base on Project Id.
Hello, I have a Requirment that I want to Display Project Name and their Client Name in Info Path Form Field as I Open the Form. I do have uploaded InfoPath form in Forms Library in Project of Project server 2010. is there any simple way to do this
-
Scratch on replacement iphone 5
Hey folks, My black iPhone 5's speaker suddenly stopped working. I went to the apple store and they replaced it for me. However, I noticed a small scratch on the replacement iPhones screen Should I take this back? Would apple entertain a replacement.
-
Get me nth largest salary without using where having sub query inline query Thanks.
-
Is there some way we can make suggestions to Apple?
That's my question. Have an idea or two regarding the current ios. Would love to submit to Apple for their consideration.