Smart Form convert to Pdf and send to email
hi,
ive dev the smart for me21n. its working fine. Standard programme is SAPLMEGUI.
now new requirement is , convert the smart form to pdf and then sending the pdf through email to customer.
Can any plz tell me is there any stadard programme or else need to custmise the print programme?
Regards
Kirans belong to convert the smart form to pdf.
there is standard programme RSTXPDFT4
but after convert the form to pdf. i need to send it thorough mail.
iam checking other link one which is send by mr.naresh..
thank you
Regards
Similar Messages
-
ME23N Script convert to PDF and send thru mail to the user created by
Hi,
I have created a custom PO SAP scirpt for the tcode ME23N and configured the same in tcode NACE Application 'EF' , output type 'NEU'
But the client requirement is to send this SAP Scipt PO converted to pdf & then send thru email to the user who created PO (ME23N)?
How do u get this functionality please let me know?
Regards,
AnilHello,
that is easy, you only need to keep the steps to do in mind:
1) find a suitable point to place in your code to do all this for you
2) create a FM that will convert your form into PDF (search a little, this has been done like zillion times here)
3) create a FM that will send the PDF stream (hex data which is accepted by the BCS class as the attachment data)
4) check the email customizing in your system
5) run and enjoy
All the parts has been done here many times, shouldn´t be a problem.
Otto -
Reg: HRforms converted to PDF and send email to individual employee
Hi Experts,
The requirement is convert the HR form output to pdf and send email to respective employee in standard transaction. I copied RPCEDTX0 to ZRPCEDTX0 and include RPCEDS09 to ZRPCEDS09, the changes need to be done for individual PERNR, I have modified the include as shown below.
CALL FUNCTION 'HRPY_PROCESS_SET_PERNR_STATUS' after this, i have written my code
* start of changes ARAFIQUE
DATA: formname TYPE tdsfname VALUE 'HR_ESS_PAYSLIP_TO_PDF',
fm_name TYPE rs38l_fnam,
pinfo LIKE pc407 OCCURS 0 WITH HEADER LINE,
pform type tt_pc408,
pform_l like pc408 OCCURS 0 WITH HEADER LINE.
IF xform[] IS NOT INITIAL.
pform_l = xform.
APPEND pform_1 TO pform.
pinfo-molga = '99'.
pinfo-forml = 'ZACC'.
APPEND pinfo.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = formname
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
pinfo =
pform = xform[]
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
* end of changes ARAFIQUE
I found out in internet that the smartform 'HR_ESS_PAYSLIP_TO_PDF' will convert to PDF and then i can send email to PERNRS.Hi Experts,
I have written the below code, the payslip is getting converted to PDF and it is getting saved in presentation server. I need to pick this file and mail, I created a customized function module for sending mail. I'm not able to send email to external addresses.
Please find my code below. I will post the function module later.
* start of changes ARAFIQUE
DATA: "formname TYPE tdsfname VALUE 'HR_ESS_PAYSLIP_TO_PDF',
"fm_name TYPE rs38l_fnam,
p_info LIKE pc407 OCCURS 0 WITH HEADER LINE,
"pform type tt_pc408,
p_form LIKE pc408 OCCURS 0 WITH HEADER LINE,
pdf_content TYPE xstring,
pdf_fsize TYPE i,
lv_output_length TYPE i,
lt_binary_data TYPE STANDARD TABLE OF sdokcntbin,
it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
it_message LIKE solisti1 OCCURS 0 WITH HEADER LINE.
IF xform[] IS NOT INITIAL.
p_form[] = xform[].
p_info-molga = '99'.
p_info-forml = 'ZACC'.
p_info-pcols = 1.
p_info-psize = 1.
APPEND p_info.
CALL FUNCTION 'CONVERT_PAYSLIP_TO_PDF'
EXPORTING
p_info = p_info
IMPORTING
pdf_content = pdf_content
pdf_fsize = pdf_fsize
TABLES
p_form = p_form[]
EXCEPTIONS
empty_form = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = pdf_content
IMPORTING
output_length = lv_output_length
TABLES
binary_tab = lt_binary_data.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\Test\Testing.pdf'
filetype = 'BIN'
TABLES
data_tab = lt_binary_data
* FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
it_receivers-receiver = 'gmailid'.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
APPEND it_receivers .
it_message-line = 'Test for sending email'.
APPEND it_message.
CALL FUNCTION 'ZSEND_MAIL_ATTACHMENT'
EXPORTING
v_file_path = 'C:\Test\Testing.pdf'
v_subject = 'Test Mail'
TABLES
it_receivers = it_receivers[]
it_message = it_message[].
IF sy-subrc EQ 0.
COMMIT WORK.
* Push mail out from SAP outbox
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF. -
Smart forms convert to pdf binary data
Dear All,
I'm working on smart forms integrations with .net and I need to send the smart forms PDF binary data though custom rfc .
For that i'm converting smart forms otf data to pdf in and pass this data through rfc but this idata is is not wokring on .net guys when they are converting this on pdf..
so is there any need of decoded smart forms otf data before passing through or i'm missing some basic step?
Please guide me?
Rg
Anujhi,
Have a look on this wiki:
[http://wiki.sdn.sap.com/wiki/display/Snippets/SmartformoutputtoPDFformat]
And maybe this one could also interest you:
[|http://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment]
regards
mickael -
Reg: Converting Standard Payslip (PC00_M99_CEDT) to PDF and send via email
Dear Experts,
Please provide me a solution to convert the standard Pay slip (PC00_M99_CEDT) Remuneration statement to PDF and send it via email to individual employee by fetching the email ids through the info types.
I checked the forum, few answers our complete but they have not given the solution.
Thanks in advance
Abdur
Moderator message: moved to requirements forum (points-free!)
Edited by: Thomas Zloch on Feb 7, 2011 11:53 AM
Moderator message: moved back to ABAP General.
Edited by: Thomas Zloch on Feb 9, 2011 1:03 PMDear Experts,
As suggested, I have written the below code.
REPORT ztest_period.
DATA : td_listobject LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA: txtlines(1024) TYPE c OCCURS 0 WITH HEADER LINE.
DATA: list_tab TYPE TABLE OF abaplist,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE.
SUBMIT rpcedtx0 VIA SELECTION-SCREEN EXPORTING LIST TO MEMORY AND RETURN.
CLEAR td_listobject. REFRESH td_listobject.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = td_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CHECK sy-subrc = 0.
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = td_listobject
out = lt_objbin
EXCEPTIONS
compress_error = 1
OTHERS = 2.
&code&
I'm getting the raw data from FM 'LIST_FROM_MEMORY' Please tell me how should i convert it to normal data.
Once i get the data, I need to send an email for individual personnel number for the respective month.
Please advice me the next step.
Thanks and Regards,
Abdur Rafique
Edited by: abdur rafique on Feb 21, 2011 11:39 AM -
Convert spool to PDF and send as email attachment
When i try to convert SAP spool to PDF and send it as email attachment, size of PDF document becomes large as compared to size of the PDF cocument i download using the same spool.
I am using following FMs.
CONVERT_ABAPSPOOLJOB_2_PDF to convert spool to PDF
and
SO_NEW_DOCUMENT_ATT_SEND_API1 to send email with attchment.
some times size of attchment exceeds 2MB and email results in error in SAP connect (SOST).
Any idea on how to compress the PDF attchment??
ThanksHi Venkat,
Can you plesae assist me.
I have a requirement to convert spool to pdf
send an email to users
issue is that attachement is big cant go through
I have used compress, but when I open the pdf file error that file was not correclty decoded
please assist, anyone -
Smartform (otf) as pdf and sending as email-attachment
Hello everybody,
when trying to convert a smartform to pdf and sending it with the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' i get an error when opening the pdf-file. It says ' a non identified Token w62.10 was found' and the pdf is all empty.
The problem seems to be somewhere between getting the pdf output data from the FM 'convert_otf' and trying to create a bin-object for the attachment.
Here is the code:
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
* max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
* Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
* Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
******* Create Message Body
**** Title and Description
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
* wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt ).
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment
* (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
* Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = ( v_lines_bin - 1 ) * 255 + strlen( i_objbin ).
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = receiver.
i_reclist-rec_type = RECEIVER_TYPE.
append i_reclist.
if not receiver is initial.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.Hi,
I just observed the following.
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132 IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
I just tried with your coding and then changed to the below coding.Now I am able to open the PDF in mail.
* Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
* Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
* Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
* Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
* Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
* Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
******* Create Message Body
**** Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text
* wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment
* (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
* Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
If your problem is solved,kindly close the thread and reward points.If you need clarifications,get back. -
Script to merge data from Numbers into Pages document, export as PDF and send via email
Hi,
I am wondering if it would be possible to achieve the following with an applescript:
1. Merge Names from Numbers into a multi-page Pages document.
2. Export each page of the resulting document as a PDF
3. Attach each of these PDFs to an email with specific text in the body of the email, setting the subject, the 'from' email address, as well as the 'to' email address from a field in the Numbers document.
4. Optionally send the emails automatically.
I would be glad to know if this is possible before I embark on trying to write such a script, and for any advice/script that would help me on my way.
Thanks,
NickThanks Bernard. Sorry if my original post wasn't that clear. I think you've pretty much got it in your paragraph starting "So, I think you're asking for", but will explain more in the hope that it will be clearer:
I have a Numbers table with 2 columns: Name and Email. I have say 50 people in this table and I need to email each person a version of a one page Pages document which would be identical except for their name.
The Name field is the only field that needs to be merged into the Pages document (one time only).
Once the merging has taken place the versions of the one page Pages document need to be exported as a PDF and attached to emails, one email from each person in the table in the Numbers document, with each email going to the email address corresponding to the name in the Numbers document.
The text in the email would be identical except for the name again. The text for the email body, subject as well as the 'from' field would be contained in the script (i.e. generated by the script).
It would also be good to have the option of sending the emails automatically or manually, so that I could check that the emails that are generated are correct before sending.
I hope that's clearer!
Nick -
Converting Smartform to PDF and send as email attachment
Hi
I want to send the Smartform to mail as PDF attachment.
I found the program in code gallery., it name was 'ZTEST_NREDDY_PDF_MAIL' .
I used this program and it send the Smartform to mail as PDF attachment but when open the pdf file it gave me error.
error : 'An unrecognized token Qq was found'.
Please help me out.
Thanks
AninaHi,
Following is the code logic:
Tables for OTF to PDF Conversion
DATA: g_t_docs TYPE STANDARD TABLE OF docs, " Table for Stored Document
g_t_lines TYPE STANDARD TABLE OF tline. " Table for Text lines
Objects to send mail.
DATA: g_t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE, " SAPoffice: Description of Imported Object Components
g_t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
g_t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
g_t_contout LIKE solisti1 OCCURS 0 WITH HEADER LINE,
g_t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE. " SAPoffice: Structure of the API Recipient List
Addresses (Business Address Services)
DATA: g_t_adrc LIKE adrc OCCURS 0,
g_t_adrc2 LIKE adrc OCCURS 0,
g_t_adrc3 LIKE adrc OCCURS 0,
g_t_adrc_wa TYPE adrc,
g_t_adrc2_wa TYPE adrc,
g_t_adrc3_wa TYPE adrc.
Sales Document: Partner
DATA: g_t_vbpa_wa TYPE vbpa.
E-Mail Addresses (Business Address Services)
DATA: g_t_adr6 LIKE adr6 OCCURS 0,
g_t_adr6_2 LIKE adr6 OCCURS 0,
g_t_adr6_wa TYPE adr6,
g_t_adr6_2_wa TYPE adr6.
DATA:
Work Area declarations
g_wa_objhead TYPE soli_tab, " Work Area for Objcont and Objhead as Table Type
g_wa_doc_chng TYPE sodocchgi1, " Work Area - Data of an object which can be changed
Variables declarations
g_lines_txt TYPE i,
g_lines_bin TYPE i,
g_email_id(40) VALUE '', " E-mail Address
PDF related data declarations
g_wa_job_output_info TYPE ssfcrescl, " Smart Forms: Return value at end of form printing
g_wa_control_parameters TYPE ssfctrlop,"#EC NEEDED " Smart Forms: Control structure
g_name TYPE string,
g_path TYPE string,
g_fullpath TYPE string,
g_filename TYPE string,
g_filter TYPE string,
g_bin_filesize TYPE i,
g_uact TYPE i,
g_guiobj TYPE REF TO cl_gui_frontend_services.
PERFORM f0100_download_pdf.
PERFORM f200_convert_to_pdf.
PERFORM f300_attach_and_mail_pdf.
*& Form f0100_download_pdf
To Download the PDF Format of SmartForm on
Presentation Server
FORM f0100_download_pdf. "#EC CALLED
Downloading PDF File
CREATE OBJECT g_guiobj.
CALL METHOD g_guiobj->file_save_dialog
EXPORTING
default_extension = 'pdf'
default_file_name = g_name
file_filter = g_filter
CHANGING
filename = g_name
path = g_path
fullpath = g_fullpath
user_action = g_uact.
IF g_uact = g_guiobj->action_cancel.
EXIT.
ENDIF.
MOVE g_fullpath TO g_filename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = g_bin_filesize
filename = g_filename
filetype = 'BIN'
TABLES
data_tab = g_t_lines.
ENDFORM. "f0100_download_pdf
*& Form f0200_convert_to_pdf
To convert the SmartForm to PDF format
FORM f0200_convert_to_pdf . "#EC CALLED
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = g_bin_filesize
TABLES
otf = g_wa_job_output_info-otfdata
doctab_archive = g_t_docs
lines = g_t_lines.
CONCATENATE text-001 g_sales_order_no '.pdf' INTO g_name.
ENDFORM. " f0200_convert_to_pdf
*& Form f0300_attach_and_mail_pdf
To E-Mail the PDF form as an Attachment
FORM f0300_attach_and_mail_pdf . "#EC CALLED
Attachment
REFRESH: g_t_reclist,
g_t_objtxt,
g_t_objbin,
g_t_objpack.
CLEAR g_wa_objhead.
Create Message Body Title and Description
g_t_objtxt = g_name.
APPEND g_t_objtxt.
DESCRIBE TABLE g_t_objtxt LINES g_lines_txt.
READ TABLE g_t_objtxt INDEX g_lines_txt.
g_wa_doc_chng-obj_name = g_name.
g_wa_doc_chng-expiry_dat = sy-datum + 10.
g_wa_doc_chng-obj_descr = g_name.
g_wa_doc_chng-sensitivty = 'F'.
g_wa_doc_chng-doc_size = g_lines_txt * 255.
Main Text
CLEAR g_t_objpack-transf_bin.
g_t_objpack-head_start = 1.
g_t_objpack-head_num = 0.
g_t_objpack-body_start = 1.
g_t_objpack-body_num = g_lines_txt.
g_t_objpack-doc_type = 'RAW'.
APPEND g_t_objpack.
Attachment (PDF-Attachment)
g_t_objpack-transf_bin = 'X'.
g_t_objpack-head_start = 1.
g_t_objpack-head_num = 0.
g_t_objpack-body_start = 1.
Convert TLINE to SOLISTI1
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_src = 134
line_width_dst = 255
TABLES
content_in = g_t_lines
content_out = g_t_contout
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE s000(0k) WITH text-002.
EXIT.
ENDIF.
Create Message Attachment
APPEND LINES OF g_t_contout[] TO g_t_objbin[].
DESCRIBE TABLE g_t_objbin LINES g_lines_bin.
READ TABLE g_t_objbin INDEX g_lines_bin.
g_t_objpack-doc_size = g_lines_bin * 255 .
g_t_objpack-body_num = g_lines_bin.
g_t_objpack-doc_type = 'PDF'.
g_t_objpack-obj_name = text-003.
g_t_objpack-obj_descr = text-004.
APPEND g_t_objpack.
CLEAR g_t_reclist.
g_t_reclist-receiver = g_email_id.
g_t_reclist-rec_type = 'U'.
APPEND g_t_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = g_wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = g_t_objpack
object_header = g_wa_objhead
contents_bin = g_t_objbin
contents_txt = g_t_objtxt
receivers = g_t_reclist.
ENDFORM. " f0300_attach_and_mail_pdf -
Convert spool to pdf and send in email sometimes attachment duplicated.
Hi all, I have a process that creates a spool, converts it to a pdf and then attaches it to an email. My problem is that sometimes, the same attachment is duplicated.
The process seems to work fine in debug mode (the attachment changes for each loop) but when I run it in the background, every few emails, it will duplicate an attachment.
I have noticed that the size of the pdf seems to change properly but that the content of the pdf does not match. So, it is like it gets the correct size of the pdf but not the body.
This is code that a consultant wrote and I am pretty new to abap/sap. I have changed some of the code because it was trying to handle an endless loop (I figured it should not have to handle (be in) an endless loop). I changed that code and it is working but this previous issue still exists. Thanks for your help.
*& Form PROCESS_EMPLOYEE
FORM process_employee .
* process appraisal only
IF it_final[] IS NOT INITIAL .
* READ DISTRIBUTION LIST *
REFRESH : it_email, it_idlient.
*Sort by supervisor
SORT it_final[] BY supervisor.
LOOP AT it_final INTO wa_final .
APPEND wa_final TO it_final1 .
AT END OF supervisor .
* Perform to create the PDF from the Output
report = 'zhr_pm_appemail'.
PERFORM create_pdf using report.
** Perform to email the PDF attachment
** to the supervisor and the Mailing list
subject = 'Performance Appraisals'.
PERFORM process_email using subject.
REFRESH it_final1 .
CLEAR it_final1 .
CLEAR wa_final .
FREE MEMORY ID 'MEM'.
ENDAT .
ENDLOOP.
ENDIF.
ENDFORM. " PROCESS_EMPLOYEE
*& Form CREATE_PDF
FORM create_pdf using report.
DATA: spoolno TYPE tsp01-rqident.
DATA : p_repid TYPE sy-repid .
DATA: v_len TYPE i , v_len1 TYPE i .
DATA: v_temp(8) TYPE c .
DATA: p_uname TYPE sy-uname .
DATA: it_tsp01 TYPE STANDARD TABLE OF tsp01 WITH HEADER LINE .
* DATA: it_pdf TYPE tline OCCURS 0 WITH HEADER LINE .
TABLES: tsp01.
DATA: var TYPE c .
*-- STRUCTURES
DATA:
lc_rq2name TYPE tsp01-rq2name.
DATA:
mstr_print_parms TYPE pri_params,
mc_valid(1) TYPE c,
mi_bytecount TYPE i,
mi_length TYPE i,
mi_rqident TYPE tsp01-rqident.
*-- INTERNAL TABLES
DATA:
mtab_pdf TYPE tline OCCURS 0 WITH HEADER LINE,
mc_filename TYPE rlgrap-filename.
*-- SELECTION SCREEN
DATA:
p_linsz TYPE sy-linsz VALUE 80, " Line size
p_paart TYPE sy-paart VALUE 'X_65_80'. " Paper Format
p_uname = sy-uname .
var = var + 1.
p_repid = report.
* START-OF-SELECTION .
concatenate p_repid+0(9)
p_uname+0(3)
into mc_filename
separated by '_'.
translate mc_filename to upper case.
*-- Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority = space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
new_list_id = 'X'
no_dialog = 'X'
user = sy-uname
IMPORTING
out_parameters = mstr_print_parms
valid = mc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc = 0 .
*--Make sure that a printer destination has been set up. If this is not done the PDF module abends.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
EXPORT it_final1 it_email p_email1 p_sender p_date vl_nmth
TO MEMORY ID 'MEM' .
IF report = 'zhr_pm_appandprogemail'.
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
IF report = 'zhr_pm_appemail'.
SUBMIT zhr_pm_appemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
ENDIF.
*Find out what the spool number is that was just created
perform get_spool_number using p_repid p_uname changing mi_rqident.
*converting the spool request into pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
IMPORTING
pdf_bytecount = mi_bytecount
TABLES
pdf = it_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
* call function 'DOWNLOAD'
* exporting
* bin_filesize = mi_bytecount
* filename = mc_filename
* filetype = 'BIN'
* importing
* act_filename = mc_filename
* tables
* data_tab = it_mess_att.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf INTO wa_pdf.
TRANSLATE wa_pdf USING ' ~'.
CONCATENATE v_gd_buffer wa_pdf INTO v_gd_buffer.
CLEAR wa_pdf .
ENDLOOP.
TRANSLATE v_gd_buffer USING '~ '.
DO.
it_mess_att = v_gd_buffer.
APPEND it_mess_att.
SHIFT v_gd_buffer LEFT BY 255 PLACES.
IF v_gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " CREATE_PDF
* FORM get_spool_nunber *
* Get the most recent spool created by user/report *
form get_spool_number using f_repid
f_uname changing f_rqident.
data:
lc_rq2name TYPE rlgrap-filename.
concatenate f_repid+0(6)
f_repid+7(3)
f_uname+0(3)
into lc_rq2name.
* separated by '_'.
translate lc_rq2name to upper case.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform. " get spool number
*& Form SEND_MAIL
FORM send_email USING p_email subject.
REFRESH it_mess_bod.
* Default subject matter
gd_subject = text-019 ."'Subject'.
gd_attachment_desc = text-020 ."'Performance Appraisal'.
IF subject = 'Performance Appraisals and Progression I'.
gd_attachment_desc = 'PerfAppAndProg'.
ENDIF.
IF subject = 'Performance Appraisals'.
gd_attachment_desc = 'PerfAppraisal'.
ENDIF.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .pdf
PERFORM send_file_as_email_attachment
TABLES it_mess_bod
it_mess_att
USING p_email
subject
'PDF'
gd_attachment_desc
gd_attachment_desc
p_sender
gd_sender_type
CHANGING gd_error
gd_reciever.
ENDFORM. " SEND_MAIL
* FORM process_email *
FORM process_email using subject.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1 subject.
* perform send_email using p_email2.
ENDFORM. "process_email
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment TABLES it_message
it_attach
USING p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
CHANGING p_error
p_reciever.
CLEAR : ld_email , ld_mtitle , ld_format , ld_attdescription ,
ld_attfilename , ld_sender_address , ld_sender_address_type ,
w_doc_data.
REFRESH: t_packing_list.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
LOOP AT it_email.
* Add the recipients email address
t_receivers-receiver = it_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
* CONTENTS_HEX = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
PERFORM update_infotype_0019 .
ENDIF.
* Populate zerror return code
* ld_error = sy-subrc.
** stop .
* READ TABLE t_receivers WITH KEY retrn_code = '0' .
* IF sy-subrc = 0 .
* v_update_flag = '1' .
* EXPORT v_update_flag TO MEMORY ID 'MEM2' .
* ENDIF .
** Populate zreceiver return code
* LOOP AT t_receivers.
* ld_receiver = t_receivers-retrn_code.
* ENDLOOP.
ENDFORM. "send_file_as_email_attachment
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 12:30 AMThank you for your response, this has allowed me to identify the problem. It is when I create the spool by using the code below. If I add a wait after this, the program works successfully. Is there another way to write the data to create a spool within my initial program rather than doing the submit? Could it be that it is putting data in memory?
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
*& Report ZHR_PM_APPANDPROGEMAIL
REPORT ZHR_PM_APPANDPROGEMAIL
NO STANDARD PAGE HEADING
LINE-SIZE 80
LINE-COUNT 65(8).
* MESSAGE-ID zhr.
* INTERNAL TABLES DECLARATION
DATA: it_pdf TYPE tline OCCURS 0 ." WITH HEADER LINE .
* WORK AEA DECLARATION
DATA: wa_pdf TYPE tline .
* Spool to PDF conversions
*DATA: "gd_spool_nr TYPE tsp01-rqident,
* gd_destination TYPE rlgrap-filename,
* gd_bytecount TYPE tst01-dsize,
DATA:v_update_flag TYPE c . "flag for updating infotype 41 last appraisal date
DATA: v_gd_buffer TYPE string.
DATA: BEGIN OF it_final1 OCCURS 0 ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
subgroup TYPE persk ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
darxx(5) TYPE c,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final1 .
DATA: t_packing_list TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers TYPE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header TYPE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data TYPE sodocchgi1 .
DATA: gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: v_flag TYPE c VALUE '1' .
DATA: BEGIN OF it_final OCCURS 0 ,
subgroup TYPE persk ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final .
DATA:it_t247 TYPE STANDARD TABLE OF t247 WITH HEADER LINE .
DATA: it_email TYPE STANDARD TABLE OF zemail WITH HEADER LINE.
*VARIABLE DECLARATION
DATA: p_date TYPE sy-datum , "excution date
vl_date TYPE sy-datum ,
p_email1 TYPE somlreci1-receiver , "receiver
p_sender TYPE somlreci1-receiver . "sender
DATA: w_recsize TYPE i.
DATA: gd_recsize TYPE i.
DATA : vl_nmth TYPE sy-datum.
DATA: v_month(2) TYPE n .
DATA: v_mon_text TYPE t247-ltx .
*START OF SELECTION
START-OF-SELECTION .
REFRESH t_receivers.
IMPORT it_final1 it_email p_email1 p_sender p_date vl_nmth FROM MEMORY ID 'MEM'.
PERFORM get_next_month .
LOOP AT it_final1 .
IF it_final1-progression IS NOT INITIAL.
MOVE-CORRESPONDING it_final1 TO it_final .
APPEND it_final .
CLEAR it_final .
* Add the recipients email address
t_receivers-receiver = it_final1-email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDIF.
ENDLOOP .
PERFORM write_output .
*END OF SELECTION
END-OF-SELECTION .
*& Form WRITE_OUTPUT
FORM write_output .
DATA: l_date(14) TYPE c ,
l_date_temp(14) TYPE c ,
v_date(10) TYPE c ,
v_date1(20) TYPE c ,
v_date1_temp(20) TYPE c ,
f_date(10) TYPE c.
DATA: lv_stext TYPE t503t-ptext .
CLEAR : v_date, v_date1.
CONCATENATE p_date+4(02) p_date+6(02) p_date+0(04)'.' INTO v_date.
CONCATENATE v_mon_text p_date+0(4) INTO l_date_temp SEPARATED BY space.
CONCATENATE l_date_temp '.' INTO l_date.
CONCATENATE v_mon_text vl_nmth+6(2) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp ',' INTO v_date1_temp.
CONCATENATE v_date1_temp vl_nmth(4) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp '.' INTO v_date1.
CONDENSE l_date .
FORMAT INTENSIFIED ON.
SKIP 4.
WRITE:/(80) text-001 CENTERED . "'METROPOLITAN UTILITIES DISTRICT'.
WRITE:/(80) text-002 CENTERED . "'OMAHA NEBR.'.
SKIP 2.
WRITE:/(80) text-003 CENTERED . "'Inter-Departmental Communication'.
FORMAT INTENSIFIED OFF.
WRITE :/(80) v_date CENTERED using edit mask '__/__/____'. " v_date.
SKIP 2.
WRITE: /10 text-004. "'SUBJECT: Performance Appraisals and Progression Increase'.
SKIP 1.
WRITE: /10 text-005, it_final1-supervisor_desc. "'TO: Supervisor'.
SKIP 1.
WRITE: /10 text-006. "'FROM: Anne M. Undajon, Director of Compensation and Benefits'.
SKIP 2.
WRITE:/10 text-007 . "'Listed below are the employees in your area who are due a '.
WRITE:/10 text-008 ,l_date. "'Performance Appraisal during the month of ',l_date.'. "v_mon_text , P_date+0(4)
WRITE:/10 text-009 . "'These employees are also eligible for a progression increase.
WRITE:/10 text-010 . "' A performance appraisal form can be found on-line in the MUD '.
WRITE:/10 text-011 . "'template section. The Performance Appraisal is to be completed '
WRITE:/10 text-012 . "'and discussed with the employee by the immediate supervisor.'
SKIP 2.
WRITE:/10 text-013. "Signed forms should be returned to the Human Resource Department by '.
WRITE:/10 v_date1.
SKIP 2 .
SORT it_final[] BY subgroup .
LOOP AT it_final .
CLEAR: lv_stext .
lv_stext = it_final-stext.
AT NEW subgroup .
TRANSLATE lv_stext TO UPPER CASE .
WRITE:/(80) lv_stext CENTERED .
SKIP 2 .
WRITE: 10 text-014 . "'Employee name' .
WRITE: 32 text-015 . "'Job Date' .
WRITE :44 text-016 . "'Last Appraisal' .
WRITE :59 text-021 . "'Employee' .
WRITE :/10 '--------------------' , 32'----------', 44 '--------------', 59 '--------'.
ENDAT .
WRITE:/10 it_final-ename .
WRITE: 32 it_final-lastjob using edit mask '__/__/____'.
CONCATENATE it_final-lastapp+4(02) it_final-lastapp+6(02) it_final-lastapp+0(04) INTO f_date.
WRITE :44 f_date using edit mask '__/__/____'.
SHIFT it_final-pernr left deleting leading '0'.
WRITE : 59 it_final-pernr.
SKIP 2 .
ENDLOOP.
SKIP 4.
WRITE :10 text-017. "'Anne M. Undajon'.
FORMAT INTENSIFIED ON.
WRITE:/10 text-018. "'Director of Compensation & Benefits'.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_OUTPUT
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 4:07 PM -
CONVERT SCANNED FILE TO PDF AND SEND TO EMAIL!
I got many files that were scanned in (110) to be exact. I need to know how to convert the scanned files to pdf and then send them to an email. Thanks Marie
What is the format (file type) of these scanned docs?
-
Invoice to convert in PDF and send by E-Mail
I would like to Convert the OutPut of Invoice to PDF format and send it through E-Mail.
Is there any SAP standard programme available to this or what is the process?This is OK, but kindly let me know the what paramter I have to enter, I entered some parameter and some parameter I cant understand, marked as '?'.
Import parameters Value
FORMAT_SRC OTF
FORMAT_DST PDF
ADDR_TYPE 5
DEVTYPE ?
FUNCPARA ?
Changing parameters Value
TRANSFER_BIN ?
CONTENT_TXT 0 Entries
CONTENT_BIN 0 Entries
OBJHEAD 0 Entries
LEN ?
Thanks
Awadhesh -
Hi,
I am using CRM ONLINE 2013.
How to automate below process?
1. On Approval Of Quotation, Run Report.
2. Generate PDF.
3. Send an Email With PDF as attachment.
As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
So, What is the alternate way to do this..?
Thanks.This is my entire code mentioned below:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('ABM_Infotech_SalesQuote');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report1.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
+
reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html> -
Script- converting in PDF and sending by mail.
Hi.
I have a sap-script for account statement.Now the same needs to be sent to customers by mail.The file format i need is PDF.
Can anyone suggest the steps I need to takeHelloo!
You first need to get the OTF code from the sapscript.
Then you should pass this to the email-function module.
REPORT Zscript_mail.
Here is a sample program.
DATA: ITCPO LIKE ITCPO,
TAB_LINES LIKE SY-TABIX.
Variables for EMAIL functionality
DATA: MAILDATA LIKE SODOCCHGI1.
DATA: MAILPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: MAILHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: MAILBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: SOLISTI1 LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
PERFORM SEND_FORM_VIA_EMAIL.
FORM SEND_FORM_VIA_EMAIL *
FORM SEND_FORM_VIA_EMAIL.
CLEAR: MAILDATA, MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
REFRESH: MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
Creation of the document to be sent File Name
MAILDATA-OBJ_NAME = 'TEST'.
Mail Subject
MAILDATA-OBJ_DESCR = 'Subject'.
Mail Contents
MAILTXT-LINE = 'Here is your file'.
APPEND MAILTXT.
Prepare Packing List
PERFORM PREPARE_PACKING_LIST.
Set recipient - email address here!!!
MAILREC-RECEIVER = '[email protected]'.
MAILREC-REC_TYPE = 'U'.
APPEND MAILREC.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = MAILDATA
PUT_IN_OUTBOX = ' '
TABLES
PACKING_LIST = MAILPACK
OBJECT_HEADER = MAILHEAD
CONTENTS_BIN = MAILBIN
CONTENTS_TXT = MAILTXT
RECEIVERS = MAILREC
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM PREPARE_PACKING_LIST.
CLEAR: MAILPACK, MAILBIN, MAILHEAD.
REFRESH: MAILPACK, MAILBIN, MAILHEAD.
DESCRIBE TABLE MAILTXT LINES TAB_LINES.
READ TABLE MAILTXT INDEX TAB_LINES.
MAILDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( MAILTXT ).
Creation of the entry for the compressed document
CLEAR MAILPACK-TRANSF_BIN.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 0.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'RAW'.
APPEND MAILPACK.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM GET_OTF_CODE.
LOOP AT SOLISTI1.
MOVE-CORRESPONDING SOLISTI1 TO MAILBIN.
APPEND MAILBIN.
ENDLOOP.
DESCRIBE TABLE MAILBIN LINES TAB_LINES.
MAILHEAD = 'TEST.OTF'.
APPEND MAILHEAD.
Creation of the entry for the compressed attachment
MAILPACK-TRANSF_BIN = 'X'.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 1.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'OTF'.
MAILPACK-OBJ_NAME = 'TEST'.
MAILPACK-OBJ_DESCR = 'Subject'.
MAILPACK-DOC_SIZE = TAB_LINES * 255.
APPEND MAILPACK.
ENDFORM.
Form GET_OTF_CODE
FORM GET_OTF_CODE.
DATA: BEGIN OF OTF OCCURS 0.
INCLUDE STRUCTURE ITCOO .
DATA: END OF OTF.
DATA: ITCPO LIKE ITCPO.
DATA: ITCPP LIKE ITCPP.
CLEAR ITCPO.
ITCPO-TDGETOTF = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'ZTEST_FORM'
LANGUAGE = SY-LANGU
OPTIONS = ITCPO
DIALOG = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
ERROR_MESSAGE = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
WINDOW = 'MAIN'
EXCEPTIONS
ERROR_MESSAGE = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
ERROR_MESSAGE = 01
OTHERS = 02.
MOVE-CORRESPONDING ITCPO TO ITCPP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = ITCPP
TABLES
OTFDATA = OTF
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR SOLISTI1. REFRESH SOLISTI1.
LOOP AT OTF.
SOLISTI1-LINE = OTF.
APPEND SOLISTI1.
ENDLOOP.
ENDFORM.
Thanks,
Susmitha -
Error - While converting Smartform to PDF and send in Email
HI all,
I am getting error while opening the PDF file. i searched in SDN but I am not able to figure out what is the correct issues.
Please find the piece of code.
* Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = ls_jobout_info-otfdata[].
* Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
** max_linewidth = 134
max_linewidth = 132
IMPORTING
** bin_file = ts_file
bin_filesize = gv_bin_filesize
TABLES
otf = gt_otf
lines = gt_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
* Passing the SAP Script text lines to SAPoffice: Single List with Column Length 255 table
DATA:
* gv_bin_filesize TYPE i, " Store the file size
gv_pos TYPE i,
gv_len TYPE i,
gv_tab_lines TYPE i.
CLEAR : gs_objbin, gs_pdf_tab.
LOOP AT gt_pdf_tab INTO gs_pdf_tab.
gv_pos = 255 - gv_len.
IF gv_pos > 134. "length of pdf_table
gv_pos = 134.
ENDIF.
gs_objbin+gv_len = gs_pdf_tab(gv_pos).
gv_len = gv_len + gv_pos.
IF gv_len = 255. "length of out (contents_bin)
APPEND gs_objbin TO gt_objbin.
CLEAR: gs_objbin, gv_len.
IF gv_pos < 134.
gs_objbin = gs_pdf_tab+gv_pos.
gv_len = 134 - gv_pos.
ENDIF.
ENDIF.
ENDLOOP.
IF gv_len > 0.
APPEND gs_objbin TO gt_objbin.
ENDIF.
* Filling the details in SAPoffice: Description of Imported Object Components table
DESCRIBE TABLE gt_objbin LINES gv_tab_lines.
CLEAR gs_objbin.
READ TABLE gt_objbin INTO gs_objbin INDEX gv_tab_lines.
IF sy-subrc = 0.
gs_objpack-doc_size = ( gv_tab_lines - 1 ) * 255 + STRLEN( gs_objbin ).
gs_objpack-transf_bin = 'X'.
gs_objpack-head_start = 1.
gs_objpack-head_num = 0.
gs_objpack-body_start = 1.
gs_objpack-body_num = gv_tab_lines.
gs_objpack-doc_type = 'PDF'.
gs_objpack-obj_name = l_title.
gs_objpack-obj_descr = w_output-tdtitle.
APPEND gs_objpack TO gt_objpack.
ENDIF.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = p_doc_chng
put_in_outbox = 'X'
sender_address = p_w_sender
sender_address_type = 'INT'
TABLES
packing_list = p_objpack
** object_header = p_objhead
contents_bin = p_objbin
** contents_txt = p_objtxt
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
receivers = p_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
kindly help...email is coming but when i tried to open the PDF file, error saying, " There is error opening a file. thie file is damages and cannot be opened'
thanksHI all,
I am getting error while opening the PDF file. i searched in SDN but I am not able to figure out what is the correct issues.
Please find the piece of code.
* Assigning the OTFDATA to OTF Structure table
CLEAR gt_otf.
gt_otf[] = ls_jobout_info-otfdata[].
* Convert the OTF DATA to SAP Script Text lines
CLEAR gt_pdf_tab.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
** max_linewidth = 134
max_linewidth = 132
IMPORTING
** bin_file = ts_file
bin_filesize = gv_bin_filesize
TABLES
otf = gt_otf
lines = gt_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
* Passing the SAP Script text lines to SAPoffice: Single List with Column Length 255 table
DATA:
* gv_bin_filesize TYPE i, " Store the file size
gv_pos TYPE i,
gv_len TYPE i,
gv_tab_lines TYPE i.
CLEAR : gs_objbin, gs_pdf_tab.
LOOP AT gt_pdf_tab INTO gs_pdf_tab.
gv_pos = 255 - gv_len.
IF gv_pos > 134. "length of pdf_table
gv_pos = 134.
ENDIF.
gs_objbin+gv_len = gs_pdf_tab(gv_pos).
gv_len = gv_len + gv_pos.
IF gv_len = 255. "length of out (contents_bin)
APPEND gs_objbin TO gt_objbin.
CLEAR: gs_objbin, gv_len.
IF gv_pos < 134.
gs_objbin = gs_pdf_tab+gv_pos.
gv_len = 134 - gv_pos.
ENDIF.
ENDIF.
ENDLOOP.
IF gv_len > 0.
APPEND gs_objbin TO gt_objbin.
ENDIF.
* Filling the details in SAPoffice: Description of Imported Object Components table
DESCRIBE TABLE gt_objbin LINES gv_tab_lines.
CLEAR gs_objbin.
READ TABLE gt_objbin INTO gs_objbin INDEX gv_tab_lines.
IF sy-subrc = 0.
gs_objpack-doc_size = ( gv_tab_lines - 1 ) * 255 + STRLEN( gs_objbin ).
gs_objpack-transf_bin = 'X'.
gs_objpack-head_start = 1.
gs_objpack-head_num = 0.
gs_objpack-body_start = 1.
gs_objpack-body_num = gv_tab_lines.
gs_objpack-doc_type = 'PDF'.
gs_objpack-obj_name = l_title.
gs_objpack-obj_descr = w_output-tdtitle.
APPEND gs_objpack TO gt_objpack.
ENDIF.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = p_doc_chng
put_in_outbox = 'X'
sender_address = p_w_sender
sender_address_type = 'INT'
TABLES
packing_list = p_objpack
** object_header = p_objhead
contents_bin = p_objbin
** contents_txt = p_objtxt
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
receivers = p_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
kindly help...email is coming but when i tried to open the PDF file, error saying, " There is error opening a file. thie file is damages and cannot be opened'
thanks
Maybe you are looking for
-
A few off things been happening recently with permission on my hard-drives and various mounted items. I've noticed this happen on and off for a good year, but gotten far worse last few days. When I right click on one of my four internal hard-drives (
-
Checkbox macros not working in Microsoft Word 2003
Using Visual Basic Editor, I made an Employee Performance Review form that automatically calculates an employee's total score as check boxes are checked. Everything worked perfectly when I made it, but since saving and closing the program, the check
-
I have an HP Pavilion dv7 1273cl laptop. I would like to upgrade the memory. The software it came with was Windows Vista but I have since upgraded that to Windows 8.1. I have read that memory upgrade depends on the installed Windows software (Xp,
-
Prints on Windows connected printer...but printer keeps saying "Printing"
I have an HP PSC Photosmart 2401 connected to my XP computer, which is wirelessly networked to my iMac. I just finally got the printing to work (it was very hard to find a helpful site that told me to install the component in Windows allowing printin
-
How would I be able to launch .EXE files in a Java application?