Smart Form Language and text style

Hello Experts,
I'm creating an Arabic SmartForm and I have 2 issues:
1- when I create my own style and assign it to my form text, the font family has no effect, whatever font family I set in the style, the same text is display when running the smartform which means the font family I set has no effect and the system is taking a default font family which ddoes not fit requirements.
2- when text is printed the characters spacing is taking most of the form space, I need to control the characters spacing within a single word, how can I do that? because if I decrease the font size, the text became not clear, if I increase the font size then I have no space enough.
Please help me in these points as it seems SAP SmartForm tools are not very helpful when it comes to complex designed forms.
Thanks in advance.

> 1- when I create my own style and assign it to my form text, the font family has no effect, whatever font family I set in the style, the same text is display when running the smartform which means the font family I set has no effect and the system is taking a default font family which ddoes not fit requirements.
you must tell SAP which fonts (family, size, style) are available on the printer, using SE73 transaction (system and printer fonts). You may use Font conversion button in SE73 to check the font is not converted to another family or another size.
> 2- when text is printed the characters spacing is taking most of the form space, I need to control the characters spacing within a single word, how can I do that? because if I decrease the font size, the text became not clear, if I increase the font size then I have no space enough.
If your printer font is a TrueType font, you can define a 7.5 points font instead of 8 for example, in SE73. Don't forget that SE73 unit of measure is decipoint, so it should be entered 075 (instead of 7.5).

Similar Messages

How to restore the languages in the input sources under 'Language and Text'

Dear all,
Recently, I am trying to free up my disk space on my macbook and I downloaded this software call Monolingual. Basically, it removes languages that you do not use to free up the disk space.
However, I accidentally remove the language that I use which is Japanese and now it seems like I cannot find it anywhere under the input sources of language and text.
Does anybody know how I can restore everything back to normal?
Thanks in advance.
Cheers,
Alfred

I think you will have to reinstall your OS. If you are running Yosemite, see
OS X Yosemite: Reinstall OS X
Best to avoid Monolingual and simlar "cleaning" utilties if possible, it is too easy to make mistakes that destroy parts of you system.
Your problem has nothing to do with your hardware, so in the futue it would be best to use the software forums for similar questions:
Mac OS & System Software

My system preferences have suddenly disappeared! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??

I went to my system preferences today and they are all gone except for my language and text icon! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??

Double click on the picture of the HD on your desktop, then look at the bottom of the window that opens.
First check the S.M.A.R.T. status on your HD: Applications > Utilities > Disk Utility > in the panel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insert disc > restart > immediately hold down c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > open Disk Utility > select your HD in the panel on the left side > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
ps: i'm hopeless.

So what you want is for it to say Lebanon (English)? If so, see if this helps:
http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

In system preferences - languages and text - the formatting of numbers does not respond, In system preferences - languages and text - the formatting of numbers does not respond

When in system preferences, under languages and text, and within it in regions, there is a place where you can format numbers - or currencies by indicating that you want a dot in decimals and comma in thousands, for instance. This is in order to format numbers in calculating sheets, either in numbers of excell.
Since I have moved to Mountain Lion, this does not work. However, with an apple advisor, we were able to determine that it is not a global problem, it seems to be a problem in my computer. We found this out when we created a new administrator user as a test, and the formatting mentioned above works like a charm.
Then we tried separating all my preferencies into a untitled folder restarted and got a set of new prefernces for my own user, and the formatting required did not work.
Now I am - as you can see - quite stumped, the advisor told me it might be in the home folder, but I lost touch with him, and I am hoping that I can find SOMEONE that can help me with this issue.
Thank you

Hi there! Just reading that paragraph I hurt all over
But I got it solved and I would like to share it with you. I actually called Apple and they created a user roots, and from the library in the HD replaced the preferences. After that it worked like a charm.... But that is not all, then excel did not work, even if preferences did, so I went and uninstalled microsoft office, and reinstalled so that was that...
I use safari... I love it, but thanks for all your offers. If I even do need something, I will let you know. and PLEASE let me know if what I wrote above makes sense.... but it works
Take care

Can't open "Formats" in "Language and Text"

In System Preferences > Language and Text, if I click the Formats tab, nothing happens. The other tabs work.
This is a problem as I messed up my date format the last time I was in there.
I tried safe booting, but it made no difference.
Any suggestions?
--Henri

Quit System Preferences.
Go to your Finder "Go" menu hold the option key to choose "Library"
and delete these files/folders:
/Preferences/com.apple.system preferences .plist
/Preferences/By Host/com.apple.systempreferences.xxx.plist of them)
and com.apple.PrefPane.Network.xxx.plist (the X's will be numbers)
Also,/Caches/com.apple.systempreferences

How can i solve "could not load language and text preference "

how can i solve " could not load language and text preference ".. help everyone...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Creating a pop window in smart forms runtime with text entry

Dear Experts,
I Need to Create a pop window ( in run time of smart forms ) in which the user can enter some text and that text needs to be populated in the smart forms ouput.
i know that I can write code inside smart forms to do it.
I dont know when where and what to done to achieve this functionality.
Can any of you help me out in this scenario.
WIth Thanks and Regards
Ravishankar Vembu.

HI
Where u want to call this POPUP.
u can call the popup in INITIALIZATION tab and in PROGRAM LINES also.
eg.. create program lines--> call the FM
data: V_SVAL type sy-ucomm.
CALL FUNCTION 'ACE_POPUP_WITH_4_OPTIONS'
IMPORTING
ANSWER = V_SVAL.
when u call the smatform the popup will be displayed automatically
Please Close this thread.. when u r problem is solved. Reward if Helpful
Regards
Naresh Reddy K

Smart Form Language Print Problem

Hi ,
i want to ask that in PO smart form if i am taking print preview. then vendor & Shipping Address are not coming in print preview...another fields are coming like tele & Fax No these are store in numeric value but these name1 and street store in taiwan Lang..
then data fetch from ARDC table but ARDC-name1 and ADRC-street store data in taiwan lang..so these two fields data is not displaying in taiwan lang during print preview but some other format is displaying like squrae shape.....
so plz send me solution...ASAP...
Thanks
Amit Nigam

Hi,
Pick up the Address using user log on language instead of adrc-spras Or the language which user wants to display on the form.
Alternatively u can also code the driver program in such a way so that, if the the sy-langu is EN pick the address in EN or pick the address in Taiwan language.
ADRC-Nation is set in such case.
Another solution is the master data for the vendor has to be first maintained in English and then international versions have to be maintained in various languages.
Thanks,
Rashmi

Newly placed images not showing up and Text Styles not previewing correctly

I was playing around with defining new text styles and they
looked OK in Dreamweaver but when previewed in browser everything
was in Times. I deleted all the pre-set styles trying to fix the
problem out why when I realized now newly placed images don't show
up in preview, but old images will. I can copy and paste an
existing image and it will show, but not if I place it new. When
trying to Manage Site, I kept getting a "Home page is not on
this...." message. Please help me figure out what I have
done!!!

>Home page is not on this...
Several possibilities spring to mind the first of which is
you haven't
defined your site properly or at all
>previewed in browser everything was in Times
a link to your stylesheet has an incorrect path
>realized now newly placed images don't show up in
preview,
they should, defined site again?
If you have a URL we could see the code?
If not can you post the code here, otherwise these are all
guesses
Jo
"chas0616" <[email protected]> wrote in
message
news:esa2uh$h4d$[email protected]..
>I was playing around with defining new text styles and
they looked OK in
> Dreamweaver but when previewed in browser everything was
in Times. I
> deleted
> all the pre-set styles trying to fix the problem out why
when I realized
> now
> newly placed images don't show up in preview, but old
images will. I can
> copy
> and paste an existing image and it will show, but not if
I place it new.
> When
> trying to Manage Site, I kept getting a "Home page is
not on this...."
> message.
> Please help me figure out what I have done!!!
>

Smart Form Generate and Activate

Hi Experts!
Can anyone explain me wat's the difference between Generate and activate in Smart forms?
Thanks!

Hi,
firstly you are creating smart form is nothing but generate. after syntax check complete u wll activate the smartform. whenever if you activate the smartform it wll create a one function module it(function module) encapsulate all the attributes of that particular form. this is nothing but activation.
thanks.
sriram.

How do I set a default title and text style on Quick?

On Adobe Premiere Essentials 13 video editing, if I use Quick is it possible to set a default style for titles and text? I see instructions for setting a default style in Expert, but that doesn't seem to work in Quick. Thanks.

aperture14
What is this Premiere Elements Essentials 13? I know the program only as Adobe Premiere Elements 13 for Windows or Adobe Premiere Elements 13 for Mac. On what computer operating system is it running and is it a pre-installed program from the computer manufacturer?
So, if you have some modified version of Premiere Elements 13 Windows or Mac, I cannot give you a yes or no answer to
if I use Quick is it possible to set a default style for titles and text?
In Adobe Premiere Elements 13 Windows (assumed Mac also), there should be no problem in creating a text title in the Quick workspace and saving a particular text style and setting that created text style to the default. Are you OK with doing that in the Expert workspace if not the Quick workspace?
Please give us more details of your situation so that we can customize a reply for you.
Thank you.
ATR

SMART FORM: HOW TO IMPORT STYLES IN SMART FORM

Hi Experts,
im working in verion 6.0 . how to import styles in my smart form.
in 6.0 im not finding the label styles were we import the styles. so plz experts help me in this.
plz show me the path step by step.
Thnaks & regards
Sunita.

Hi Arpit,
Thnx for ur early reply .here in 6.0 i cant find the styles option .yeah in 4.6 or 4.7 we find in the output options.but in 6.0 im unable to find so plz help me.
Thnaks & regards
Sunita

Working with forms, buttons and text files

please am new to java am working on the project. please see sample below, can anyone tell me how i can get the button in form1 to open form2 and also how the information entered in the textfield can be written to a text file. THANKS
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class Form1 extends JFrame
     static JFrame frame;
     static JPanel panel;
JLabel label;
     JTextField text;
     JButton btn;
     GridBagLayout g;
GridBagConstraints gbc;
     public Form1()
          label = new JLabel ("Label");
          gbc.gridx = 0;
gbc.gridy = 1;
g.setConstraints(label, gbc);
panel.add(label);
          text = new JTextField();
gbc.gridx= 1;
gbc.gridy = 1;
g.setConstraints(text, gbc);
panel.add(text);
          btn = new JButton ("CONTINUE");
          gbc.gridx = 0;
          gbc.gridy = 2;
          g.setConstraints(btn, gbc);
          panel.add(btn);
import java.awt.event.*;
public class Form2 extends JFrame
     static JFrame frame;
     static JPanel panel;
JLabel label;
     JTextField text;
     JButton btn;
     GridBagLayout g;
GridBagConstraints gbc;
     public Form2()
          label = new JLabel ("Label2");
          gbc.gridx = 0;
gbc.gridy = 1;
g.setConstraints(label2, gbc);
panel.add(label2);
          text2 = new JTextField();
gbc.gridx= 1;
gbc.gridy = 1;
g.setConstraints(text2, gbc);
panel.add(text2);
}

please am new to java am working on the project.
please see sample below, can anyone tell me how i can
get the button in form1 to open form2 For opening form2 from form1 you can add a actionListener to the button.When the button is pressed instantiate the other class and render it visible which i leave it to you to implement.
and also how
the information entered in the textfield can be
written to a text file. THANKSUse getText ( ) method of JTextField to retrieve the text from it and then it's ordinary file io operations for which i guide you to the tutorials here
http://java.sun.com/docs/books/tutorial/essential/io/index.html

Smart form upload and download functionality

Hi,
I have a requirement where i have to download a form from sandbox system and then upload it to development system.
I have download the form zhello from Sandbox system and I tried to upload the same form Zhello in development system. I am getting an error message that the file already exist.
I have a doubt whether I have to go and delete the Zhello from development server and then start trying to upload the Zhello which has been downloaded from sandbox server
let me know your thoughts
Regards
Yamini.A

First of all is your sandbox and development are on the same server or not if they are on same server then you dont need to download or upload it as it will be available in all the clients then.
If they are on different servers then you have to delete the zhello name from development server to use again or use any other Zname instead.
Regards,
Amit
Reward all helpful replies.

Smart Form Language and text style

Similar Messages

Maybe you are looking for