Smart Form printing witout dialog box

Hi Experts,
I want to print the smart form when i execute the print program witout any dialogbox asking for printer name or other details.
I am using the following code. By using this i am not getting any dialog box, but its not printing anything.
DATA wa_outputoption TYPE ssfcompop.
DATA wa_controlparameters TYPE ssfctrlop.
wa_outputoption-tddest = 'INFO' .
wa_outputoption-tdnoprev = 'x'.
wa_outputoption-tdimmed = 'X' .
wa_controlparameters-no_dialog = 'X' .
wa_controlparameters-no_open = 'X'.
wa_controlparameters-no_close = 'X'.
wa_controlparameters-device   = 'PRINTER'.
CALL FUNCTION '/1BCDWB/SF00000116'
    EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
    control_parameters         = wa_controlparameters
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   output_options             = wa_outputoption
USER_SETTINGS              = 'X'
      v_whno                     = 'WN1'
      v_sttyp                    = 'ND1'
      v_plant                    = 'WN01'
      v_invrec                   = '1068'
      v_page                     = '3'
      v_invdt                    = sy-datlo
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
Please suggest a solution.

hi pankaj,
it looks fine, u r passing correct parameters only but just try..
just pass these parameters:
DATA: ST_CONTROL_PARAMETERS      TYPE SSFCTRLOP
st_control_parameters-device     = 'PRINTER'. "Output device
st_control_parameters-no_dialog = 'X'.       "SAP Smart Forms: General Indicator
I am using the same, it is working fine,
can u plese tell wht exactly happening.. is the dialogue is displaying or smethig else. r u calling this from only once or many time base on any conditions check once..r u passing right values..
call this FM before calling samrtform because u will face problems in PRD and Quality.. if u r already then ignore this.
c_formname = 'xxxx ut form name'.
v_fm_name is type rs38l_fnam.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = c_formname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
CALL FUNCTION v_fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
control_parameters = wa_controlparameters
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* output_options = wa_outputoption
* USER_SETTINGS = 'X'
v_whno = 'WN1'
v_sttyp = 'ND1'
v_plant = 'WN01'
v_invrec = '1068'
v_page = '3'
v_invdt = sy-datlo
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5

Similar Messages

Smart form printing without dialog box

Hi,
Thanks to eveyone for reading this post.
I want to print a form thru smartform. I am able to do that now by calling that smart form and passing the data. Now i wanted to print multiple docs using smartform so that the dialog box printer doesnt apppear and all printing is executed without any user intervention.
I tried to call smart form in the following way so that data is printed to the printer without any thing appearing on the screen (dialog box).
I did consult the forums here and when i try it I either see the dialog box or see other sy-subrc.
Code -
Data: w_ctrlop TYPE ssfctrlop,
         w_compop TYPE ssfcompop.
W_COMPOP-tdnewid   = 'X'.
W_COMPOP-tdFINAL   = 'X'.
W_COMPOP-tdimmed   = 'X'.
W_COMPOP-tddelete = 'X'.
W_COMPOP-tdcopies = 1 .
*W_COMPOP-TDNOPREV = 'X' .
W_COMPOP-TDDEST    = 'LP01'.
*W_COMPOP-tdnoprint = 'X'.
W_ctrlop-DEVICE    = 'PRINTER'.    " Here we dont give printer name 'KX-P3696'.
w_ctrlop-no_dialog = 'X'.
w_ctrlop-preview   = ''.
CALL FUNCTION '/1BCDWB/SF00000135'
*CALL FUNCTION v_form_name
EXPORTING
    control_parameters = w_ctrlop
    output_options      = w_compop
    user_settings       = 'X'
IMPORTING
    job_output_info    = w_return
EXCEPTIONS
    formatting_error   = 1
    internal_error     = 2
    send_error         = 3
    user_canceled      = 4
    OTHERS             = 5.
i would be glad if anyone can help me. I did a few RND in the code above to make it work but it dosent.
Moreover when the dialog box appears then there is a text in the bar below which says please maintain printer master data. (something like that). Is that creating a problem ?
Thanks,
JG

REPORT ZANNTEST.
Data Declarations
DATA : control TYPE ssfctrlop,"Smart Forms: Control structure
            output_options TYPE ssfcompop,"Smart Composer (transfer) options
             v_fm TYPE rs38l_fnam."Form Name
control-preview = 'X'."Preview the output of Smartform
control-no_dialog = 'X'."Don't show Dialog
output_options-tddest = 'LOCL'."Spool: Output device
output_options-tdnoprint = 'X'."No printing from print preview
Function Module to get Generated Fucntion module of Smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname                 = 'ZCONEXTNLETTER' " your created zform
IMPORTING
   fm_name                  = v_fm
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_fm
EXPORTING
   user_settings            = ' '                         " don't forget this option
   control_parameters       = control
   output_options           = output_options
    PR_PERNR                = '00001019'   " it wil come from ur form parameters
    PR_BEGDA                = '19940101'   " it will come from ut form parameters
EXCEPTIONS
   FORMATTING_ERROR         = 1
   INTERNAL_ERROR           = 2
   SEND_ERROR               = 3
   USER_CANCELED            = 4
   OTHERS                   = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is the best answer for ur requirement..
lets njyyyyyyyyyyy..

Smart forms print control pop box (no required) when run report

Dear All Expert Guru,
         how to control printing pop box when execute transaction code ,Report are make in smart form format
         because while run our report then come printing pop box select out put device the will come report
                                         . but our user required no should be come printing pop box they are required when run report direct come report
   Pls help me any one.
Thanks & Regars.
Sudhir Srivsatava

Hi,
   Pass the parameter no_dialog = 'X' while calling the smartform.
data: wa_ctrlop type ssfctrlop.
   wa_ctrlop-no_dialog = 'X'.
CALL FUNCTION fm_name
EXPORTING
*   ARCHIVE_INDEX              = ARCHIVE_INDEX
*   ARCHIVE_INDEX_TAB          = ARCHIVE_INDEX_TAB
*   ARCHIVE_PARAMETERS         = ARCHIVE_PARAMETERS
    CONTROL_PARAMETERS         = wa_ctrlop
*   MAIL_APPL_OBJ              = MAIL_APPL_OBJ
*   MAIL_RECIPIENT             = MAIL_RECIPIENT
*   MAIL_SENDER                = MAIL_SENDER
*    OUTPUT_OPTIONS             = OUTPUT_OPTIONS
*    USER_SETTINGS              = 'X'
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
*   JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
*   JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
Regards,
Srini.

Regarding Smart Form Printing, Print Preview issues

Hi,
I have couple of issues regarding Smart Form Printing, Print Preview.
In my program i am passing below parameters to smart form function module:
t_control-device = c_printer.
t_control-no_dialog = space.
t_control-preview = space.
t_control-no_dialog = c_x.
t_output-tddest = g_spld.
t_output-tdimmed = c_x. " Print Immediately
t_output-tddelete = space. " Don't Release spool after output
g_user_settings = c_x.
Issue#1: Though i have set preview paramter to space, after executing program it is prompting for Preview Screen, There again i have to give printer name though i am passing printer name as above and i need to hit on print preview button to set Layout output.
Here how can i go directly to layout output without preview screen.
Issue#2: In some cases we need to Print the layout set output after executing program immediately without prompting for preview screen and then Layout set output should also be shown after printing the output.
How can i solve these issues!
Thanks in advance.
Thanks,
Deep.

Hi,
In the SAP menu screen goto <b>System->User Profile->Own data</b>
There in the defaults tab, for the output device give the value you had maintained for <b>g_spld.</b> This will not prompt you a dialog screen, and if you want to print immediately select the checkbox as well. Then try to execute the smartform. Hope this solves ur issue.
Tushar

Print Preferences Dialog Box

Hi,
I am user defined form (Dispatch Memo).
I have done coding for display crystal report
When i click on Print Preview, its showing me Print Preference Dialog box.
How should i hide this dialog box.
Thanx & Regards,
Pravin

HI PRAVINAUG17 ,
Please check first Printer is attach as default or not
and which sap version used ?
Regrads
kalpen

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

SAP Vendor Master Communication Details for SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi Ravi,
I don't know about a function module, but the vendor master table LFA1 has a field ADRNR pointing to the general address table with the fields for e.g. language and to the tables ADR2 for phone numbers, ADR3 for fax numbers and ADR6 for e-mail addresses.
BR
Raf

Communication Details Vendor Master SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi,
class VMD_EI_API_EXTRACT with method GET_DATA could make it.
There are also some eSOA services that could make it fine. See services starting with Supplier*.
Otherwise, this is more complicated.
BR
Alain

Print Configuration Dialog Box

Hello all,
I want to enable the print configuration dialog box pop up when a button is clicked in vi.
This is standard windows printer configuration dialog box which pops up when any file (xls,txt etc.)
is tried printing.Any suggestions please ?
Also i have attached the standard windows print dialog box, just incase.
Thanks in advance,
Nalin
Attachments:
print.JPG ‏33 KB

In general use a property node with nothing attached to it in LabVIEW with the property Printing >> Default Printer or Printing >> Avalaible Printers to return the printers configured with Windows. One of these string items can be wired into the printer input of the report generation Print Report VI to select a printer.
In regards to the Microsoft Common Dialog 6.0 ActiveX controls, the printer selection from the dialog seems to be determined by the hDC output, which stands for hardware device context. If you modify the demo posted above to send in the appropriate flag value, either an informational or a direct hardware device context handle is returned in the ICommon property hDC. Input the flag value 512 to the ICommonDialog property Flags to return an hardware device context handle from the hDC property, or 1024 to return an informational device context.
More information about how to extract any meaningful information from this I32 number can doubtlessly be found at msdn.com, but I'm not sure personally how to do it. Specifically, here are a few posts to start your search at:
Using the Print Dialog Box
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vbcon98/html/vbconusingprintdialogb...
Common DialogControl Constants
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cmdlg98/html/vbidxCommonDialogContr...
Alternatively, consider avoiding the Common Dialog Control calling a dll that will directly return the selected printer name from a dialog:
http://support.microsoft.com/default.aspx?scid=kb;en-us;322710
Hope this helps!
Jarrod S.
National Instruments

Regarding Smart Form Printing

related to smart form printing :
I have to print the data using template , but i dont want to fix the line in template ,
i want to take the data in template , and how much data is accessed that much space
must be occupied on the page, i dont want to fix the area in template
Hope you have got me.
Edited by: rihano7 mansoori on Jul 13, 2011 2:48 PM
Edited by: rihano7 mansoori on Jul 13, 2011 2:49 PM
Moderator message: please choose more descriptive subject lines for your posts.
Edited by: Thomas Zloch on Jul 13, 2011 3:53 PM

Hi,
Do you intend to say , that template cell size should vary depending on your data.
I doubt that is possible.
You should look for a workaround.
Why dont you be more specific in your exact requirment, so that an alternate soln can be found.

Print Progress Dialog box always stays on top

Since upgrading to InDesign CC I have noticed that all print progress dialog boxes stay on top of all windows, even after switching apps. I find this highly annoying and want it to go away. Is there a preference I can change to make it NOT be on top, especially when I've switched to a different application?

(I am OP, having account issues)
Trashing preferences wouldn't help if it is a default behavior, which I think this is since it's been happening since the beginning with CC. I was wondering if this was a behavior that I can change with a preference or if I'm just stuck with it.

Image looks great in PS- when I go to print it looks grainy in printer preview dialog box and prints blurry. Why?

Image looks great in PS- when I go to print, it looks grainy in printer preview dialog box and prints blurry. Why is this happening?

PS CC, Yosemite, Epson 3880 (called espson to make sure it wasn't something with that), saved as a tiff/psdjpg- all files behave the same way. When I open the raw file- and only crop the image- it behaves this way now- with grain and blur when printing. No other files do this in the same shoot. I worked on this image- could something have gotten corrupted along the way such that now even opening the raw file creates this problem. SInce upgrading my computer - a window pops up when I open PS that says I need to update my graphics card?? for 3D- I'm not using 3D- so I don't know if that means anything. I have to leave for about an hour- but greatly appreciate any feedback. I will be in touch. Thank you.

Printing directly to printer without Print setup dialog box

I am using Crystal Reports 2008 with VB.NET 2008. Using the CrystalReportViewer control, how can I print directly to the printer without having the Print setup dialog box popup every time?

Only way would be to create your own print button and use the report engine APIs. A good sample app is vbnet_win_printtoprinter in this sample download:
https://smpdl.sap-ag.de/~sapidp/012002523100006252822008E/net_win_smpl.exe
The developer help is a good place to have a look also;
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
https://boc.sdn.sap.com/developer/library
Additional resources:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208edbbf-671e-2b10-d7b5-9b57a832e427
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/702ab443-6a64-2b10-3683-88eb1c3744bc
Ludek

How to print a dialog box with all its components ?

Hi !
I've written an application.It has a dialog box [JDialog] containing following components:
1) 2 JLabels.
1) A JTextField.
3) A JTable with some values.
4) A JProgressBar.
5) A JButton.
6) An animated gif image.
I want to print the dialog box with all its components exactly as the are [ Except the button & animated gif ].
Would anybody please help me?
My Operating System: Windows XP

The article over at http://java.sun.com/developer/technicalArticles/Printing/Java2DPrinting/ has some helpful information on printing Swing components.
It suggests creating a subclass of the JComponent that you want to print, and have it implement Printable interface.
So, something like (note, uncompiled / untested code alert) :
import java.awt.Frame;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.HeadlessException;
import java.awt.print.PageFormat;
import java.awt.print.Printable;
import javax.swing.JDialog;
public class PrintableDialog extends JDialog implements Printable {
      * Or whichever constructor you need...
     public PrintableDialog(Frame owner, String title, boolean modal) throws HeadlessException {
          super(owner, title, modal);
      * Implementation of the Printable interface.
       public int print(Graphics g, PageFormat pf, int pageIndex) {
          if (pageIndex != 0) return NO_SUCH_PAGE;
          Graphics2D g2 = (Graphics2D) g;
          g2.translate(pf.getImageableX(), pf.getImageableY());
          getContentPane().paint(g2);
          return PAGE_EXISTS;
}Cheers,
John

Issue Regarding Chinese characters In Smart Form Print preview..

Hi All,
I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
Now the problem is even if I login using EN or ZH the below issue I am facing always.
In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
Please help..
Thanks in advance.
Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

Smart Form printing witout dialog box

Similar Messages

Maybe you are looking for