Smart Form Very slow

Hi,
I have a problem when i printing a Invoice Smartform it is taking long time for output. Is the form execution is based on his Conditions?
How to speed up the output printing? Pls advise...

Thanks for your reply.
Smartform Intially it run very fast. Now it is getting Slow. This form is TAX Invoice Form. Is this because of data retrieval?
Pls advise...

Similar Messages

Smart collection very slow (performance)

I have a problem with the Smart Collection. They are very slow in 3.2
I did a little test and compared 2.7 with 3.2 with the same catalog.
In 2.7 catalog all the smart collections are very fast.
So I have the same catalog with the same smart collections. Often they take 5 - 10 seconds when clicked the first time.
Even a Smart collection yielding 2 images can take up to 5 - 10 seconds.
This is the Smart Collection
Name:              Testing
Match:             All
Field:               Filename
Expression:     contains
Value              ANH_20090331_4253.JPG,ANH_20090331_4254.JPG,
This should result in 2 image. The full names are given.
In LR 2.7 the results are there in a split of a second. In 3.2 the first time you click on it it takes 5 - 10 seconds. The processor goes to 50% all the time.
Even a normal collection (not smart collections) with 97 images takes more than 5 seconds when clicked. This is very slow.
The second time it is within a second. But clicking another "difficult smart collection" and returning, then again it takes 5 - 10 seconds.
For the record:
Lightroom version: 3.2 [692106]
Operating system: Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Version: 5.1 [2600]
Application architecture: x86
System architecture: x86
Physical processor count: 2
Processor speed: 2,9 GHz
Built-in memory: 2047,0 MB
Real memory available to Lightroom: 716,8 MB
Real memory used by Lightroom: 150,8 MB (21,0%)
Virtual memory used by Lightroom: 148,0 MB
Memory cache size: 62,4 MB
System DPI setting: 96 DPI
Displays: 1) 1280x1024
Serial Number: 116040017934919748523304
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.2
Library Path: D:\Lightroom\FotoDatabase\FotoDatabase-3.lrcat
Settings Folder: C:\Documents and Settings\Dick\Application Data\Adobe\Lightroom

Smart collections are really slow for me also.
It takes well over two minutes to populate the collection's images counts when first starting lightroom. I have approx 80 smart collections, some quite complex, but even so, this seems very slow. Once the inital counts have populated, showing the images is reasonably fast.
The rest of LR is pretty fast, SC's are the only thing that bothers me.
Using LR 3.3RC, high end PC:
     Win7x64
     i7/860
     16GB RAM
     SSD for boot
     SSD for LR
     45,000 images in catalogue
Mike

PS CS3 Smart Sharpen very slow for LCE

PS CS3 Smart Sharpen is very slow to create a preview and then be applied to the image, at least when using a low amount and high radius, eg 20, 50, for local contrast enhancement (LCE). I'm now running Vista 64, but I think it happened even under XP 32.
Is this a common issue or is there some way of speeding things up with Smart Sharpen?
Cheers, John

A solution!
It turns out the problem in my case was in fact Suitcase. Previously, I'd tried turning it off, but that didn't fix the problem, so this time, I uninstalled it completely and the problem disappeared. I then began re-adding it (installed 15.0.1, upgraded it, etc.) and the problem resurfaced with the addition of the Photoshop-specific plugin. Deleting that plugin solved the problem. So it seems that "disabling" Suitcase by stopping the TypeCore doesn't seem to actually disable all of the tentacles it sticks into your system.
You can find the plugin here: Applications / Adobe Photoshop CS6 / Plug-ins / Automate / ExtensisFontManagementPSCS6.plugin
(After a restart, I also had to delete the font cache, as described here http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html but your mileage may vary.)
Alternately, if you don't want to delete the plugin, disabling it from within Photoshop seems to work as well. To do that, go to File > Automate > Extensis, click Preferences..., then deselect Enable Suitcase Fusion 4 Auto-Activation.
Fortunately, the plugin doesn't seem necessary at all to use the the core functionality of Suitcase (enabling and disabling fonts) in Photoshop. I didn't even know what these app-specific plugins did until researching this problem, and I still don't quite understand the point of them. I guess they allow you to let the apps for which they're installed do a little bit more of their own management (enable a font via Suitcase that isn't enabled system-wide), but that seems like more control than I need--if I'm enabling a font, I want all my software to be able to use it.
Anyway, the problem seems to be completely solved on my system now, though I just did all this, so more testing over the next few days is required. I'll post here if any issues crop up. I'm interested in hearing if this solves it for anyone else as well.

Form very slow to open

I have completed my dynamic, interactive form but it takes an inordinate amount of time for users to open with their Adobe Reader. I am using some Javascript in my form.
Is there any way to minimize the time it takes to open the form?
Thanks for any suggestions!
Suzanne

Hi Suzanne,
Based on the limited info, could be any number of things. Below are a few suggestions.
1. File size: How many pages is the form? If it's somewhere in the vicinity of 40 pages, then performance will take a hit.
2. Events. What events are the JavaScript placed in? Often the event may be firing off more than once, so I'd recommend that you look at the PDF event model to decide the best event in which to place your code.
3. Dynamics. When and when are you firing this?
Cheers,
Eric Lau

Documents with Smart Objects - Very slow to open and Save - CS6 Photoshop

When opening and saving documents with smart objects photoshop freezes the adobe PS loader (circle dots) is replaced and the system loader (multi colored wheel of death) spins for 30 seconds or more.
What I've tried so far based off looking at various posts.
Photoshop Preferenes
Save in Background off
Maximise PSD and PSB file compatability never
Cache Tile Size: 128k
Advanced Graphic Processor Settings: Basic & Normal
Layer Panel options: No Thumbnail
Observations and workthroughs to date
The file size and amount of smart objects effects the file expotentially i.e. The more smart objects you have the worse it gets
These files worked perfectly in PS CS5
It also happens on files natively created in PS CS6
The CPU is maxing out at 100% while PS loads
Closing or opening suitcase has no effect.
System:
iMac 27-inch, Mid 2011
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 1024 MB
Mac OS X Lion 10.7.5 (11G63)
Suitcase 4
Anyone got any ideas? This is making me go nuts!

A solution!
It turns out the problem in my case was in fact Suitcase. Previously, I'd tried turning it off, but that didn't fix the problem, so this time, I uninstalled it completely and the problem disappeared. I then began re-adding it (installed 15.0.1, upgraded it, etc.) and the problem resurfaced with the addition of the Photoshop-specific plugin. Deleting that plugin solved the problem. So it seems that "disabling" Suitcase by stopping the TypeCore doesn't seem to actually disable all of the tentacles it sticks into your system.
You can find the plugin here: Applications / Adobe Photoshop CS6 / Plug-ins / Automate / ExtensisFontManagementPSCS6.plugin
(After a restart, I also had to delete the font cache, as described here http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html but your mileage may vary.)
Alternately, if you don't want to delete the plugin, disabling it from within Photoshop seems to work as well. To do that, go to File > Automate > Extensis, click Preferences..., then deselect Enable Suitcase Fusion 4 Auto-Activation.
Fortunately, the plugin doesn't seem necessary at all to use the the core functionality of Suitcase (enabling and disabling fonts) in Photoshop. I didn't even know what these app-specific plugins did until researching this problem, and I still don't quite understand the point of them. I guess they allow you to let the apps for which they're installed do a little bit more of their own management (enable a font via Suitcase that isn't enabled system-wide), but that seems like more control than I need--if I'm enabling a font, I want all my software to be able to use it.
Anyway, the problem seems to be completely solved on my system now, though I just did all this, so more testing over the next few days is required. I'll post here if any issues crop up. I'm interested in hearing if this solves it for anyone else as well.

Smart forms - Very Urgent..............

Hi....
i want to display changed po details in smartforms...
here the sample report prg... se 38.. its working fine..
but i want to display the changed details like qty, date, etc..
Atleast one field i want to display in smartforms...
if possible pls help me........
se 38.... sample code..
REPORT ZPOCHANGE LINE-SIZE 132 NO STANDARD PAGE HEADING
LINE-COUNT 065(001)
MESSAGE-ID VR.
TABLES: DD04T,
CDHDR,
CDPOS,
DD03L,
DD41V,
T685T,
VBPA,
TPART,
KONVC,
EKKO.
SELECT-OPTIONS: XUDATE FOR CDHDR-UDATE,
XNAME FOR CDHDR-USERNAME,
XEBELN FOR EKKO-EBELN,
XLIFNR FOR EKKO-LIFNR.
SELECTION-SCREEN SKIP.
TEXT-001 - Sorting Sequence
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS: SUDATE RADIOBUTTON GROUP R1,
SNAME RADIOBUTTON GROUP R1,
SOBID RADIOBUTTON GROUP R1.
SELECTION-SCREEN END OF BLOCK BLK1.
DATA: WFLAG,
WCHANGENR LIKE CDHDR-CHANGENR.
DATA: INDTEXT(60) TYPE C.
DATA: BEGIN OF ICDHDR OCCURS 50.
INCLUDE STRUCTURE CDHDR.
DATA: END OF ICDHDR.
DATA: BEGIN OF ICDSHW OCCURS 50.
INCLUDE STRUCTURE CDSHW.
DATA: END OF ICDSHW.
DATA: BEGIN OF EKKEY,
EBELN LIKE EKET-EBELN,
EBELP LIKE EKET-EBELP,
ETENR LIKE EKET-ETENR,
END OF EKKEY.
DATA: BEGIN OF ITAB OCCURS 50,
BEGIN OF EKKEY,
EBELN LIKE EKET-EBELN,
EBELP LIKE EKET-EBELP,
ETENR LIKE EKET-ETENR,
END OF EKKEY,
CHANGENR LIKE CDHDR-CHANGENR,
UDATE LIKE CDHDR-UDATE,
UTIME LIKE CDHDR-UTIME,
USERNAME LIKE CDHDR-USERNAME,
CHNGIND LIKE CDSHW-CHNGIND,
FTEXT LIKE CDSHW-FTEXT,
OUTLEN LIKE CDSHW-OUTLEN,
F_OLD LIKE CDSHW-F_OLD,
F_NEW LIKE CDSHW-F_NEW,
END OF ITAB.
DATA: OLD_OBJECTID LIKE CDHDR-OBJECTID.
FIELD-SYMBOLS: <F_OLD>, <F_NEW>.
SELECT * FROM EKKO WHERE EBELN IN XEBELN AND
LIFNR IN XLIFNR.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID = EKKO-EBELN.
PERFORM GETCHGDOCS.
ENDSELECT.
IF SUDATE = 'X'.
SORT ITAB BY UDATE EKKEY-EBELN CHANGENR EKKEY-EBELP
EKKEY-ETENR.
ELSEIF SNAME = 'X'.
SORT ITAB BY USERNAME EKKEY-EBELN CHANGENR EKKEY-EBELP
EKKEY-ETENR.
ELSE.
SORT ITAB BY EKKEY-EBELN CHANGENR EKKEY-EBELP EKKEY-ETENR.
ENDIF.
LOOP AT ITAB.
CLEAR: INDTEXT, EKKEY.
CASE ITAB-CHNGIND.
WHEN 'U'.
INDTEXT(50) = ITAB-FTEXT.
INDTEXT+51 = TEXT-020.
CONDENSE INDTEXT.
WHEN 'D'.
INDTEXT = TEXT-021.
WHEN 'E'.
INDTEXT(5) = ITAB-FTEXT.
INDTEXT+51 = TEXT-021.
CONDENSE INDTEXT.
WHEN 'I'.
INDTEXT = TEXT-022.
ENDCASE.
RESERVE 4 LINES.
IF WCHANGENR NE ITAB-CHANGENR.
WCHANGENR = ITAB-CHANGENR.
EKKEY = ITAB-EKKEY.
WRITE:/ ITAB-UDATE UNDER 'Change Date',
ITAB-UTIME UNDER 'Time',
ITAB-USERNAME UNDER 'User Name',
ITAB-EKKEY-EBELN UNDER 'PO No',
ITAB-EKKEY-EBELP UNDER 'Item',
ITAB-EKKEY-ETENR UNDER 'Sch No',
INDTEXT UNDER 'Changes'.
ELSEIF ITAB-EKKEY NE EKKEY.
WRITE:/ ITAB-EKKEY-EBELP UNDER 'Item',
ITAB-EKKEY-ETENR UNDER 'Sch No',
INDTEXT UNDER 'Changes'.
ENDIF.
CASE ITAB-CHNGIND.
WHEN 'U'.
ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
ASSIGN ITAB-F_NEW(ITAB-OUTLEN) TO <F_NEW>.
WRITE: / TEXT-023 UNDER 'Changes',
<F_OLD>.
WRITE: / TEXT-024 UNDER 'Changes',
<F_NEW>.
WHEN 'E'.
ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
WRITE: TEXT-023 UNDER 'Changes',
<F_OLD>.
ENDCASE.
SKIP.
ENDLOOP.
TOP-OF-PAGE.
WRITE:/ SY-DATUM,SY-UZEIT,
50 'P U R C H A S E O R D E R H I S T O R Y',
120 'Page', SY-PAGNO.
WRITE: / SY-REPID,
60 'Purchase Orders Changes'.
SKIP.
ULINE.
IF SUDATE = 'X'.
WRITE:/001 'Change Date',
014 'Time',
024 'User Name',
038 'PO No',
050 'Item',
057 'Sch No',
065 'Changes'.
ELSEIF SOBID = 'X'.
WRITE:/001 'PO No',
013 'Item',
020 'Sch No',
028 'Change Date',
041 'Time',
051 'User Name',
065 'Changes'.
ELSE.
WRITE:/001 'User Name',
015 'Change Date',
028 'Time',
038 'PO No',
050 'Item',
057 'Sch No',
065 'Changes'.
ENDIF.
ULINE.
FORM GETCHGDOCS.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
DATE_OF_CHANGE = CDHDR-UDATE
OBJECTCLASS = CDHDR-OBJECTCLAS
OBJECTID = CDHDR-OBJECTID
TIME_OF_CHANGE = CDHDR-UTIME
USERNAME = CDHDR-USERNAME
TABLES
I_CDHDR = ICDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
OTHERS = 2.
CHECK SY-SUBRC EQ 0.
DELETE ICDHDR WHERE CHANGE_IND EQ 'I'.
CHECK NOT ICDHDR[] IS INITIAL.
LOOP AT ICDHDR.
CHECK ICDHDR-UDATE IN XUDATE.
CHECK ICDHDR-USERNAME IN XNAME.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING CHANGENUMBER = ICDHDR-CHANGENR
IMPORTING HEADER = CDHDR
TABLES EDITPOS = ICDSHW
EXCEPTIONS NO_POSITION_FOUND = 1
OTHERS = 2.
CHECK SY-SUBRC EQ 0.
LOOP AT ICDSHW.
CHECK ICDSHW-TEXT_CASE EQ SPACE.
MOVE-CORRESPONDING ICDSHW TO ITAB.
MOVE-CORRESPONDING ICDHDR TO ITAB.
MOVE ICDSHW-TABKEY+3 TO ITAB-EKKEY.
APPEND ITAB.
ENDLOOP.
ENDLOOP.
ENDFORM.

Hi Himanshu,
I think You r right. let me explain you the problem in brief to you.
In Window I have three thing's
       Header
       Main Area
       Footer.
Inside main area I have define a Row. Inside row there are 3 cell let cell1, cell2 and cell3.
In the cell1 i have created on Code statment. in which I am taking data in one Internal table.
After code there is a loop statment. In which I have assign internal table to a work area.
after loop statment there is a TEXT statment. In which I preinting the data with work area.
Same process is running for 3 data. But only the last data is being printed.
I have checked internal table , internal table contain 2 records.
Please provide me the proper guidence to sort out the issue.

Slow down printing speed for Smart Forms

Hi,
Is there any command (etc.) to slow down the printing speed of an Hp laserjet when printing a smart forms?
I need that because when I print that smart form to fast I run into print out quality problems.
Many Thanks

hi,
take print out in a dot matrix printer instead of your laser printer without changing any settings.
Coz i tried this once, i was successfull. But, the printout will be very slow.
regards,
kool.

Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.

Hi All, I have a master detail form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
for rec in (select wrrh_col
                  wpbh_col_lvd,
                   wpbh_col_doc_no
      from wh_col,
           wkpl_col,
           wh_col
     where wrrh_col_no = :block.wreh_wrrh_col_no
       and wrrh_col_no = wreh_wrrh_col_no
         and wrrh_col_no = wpbh_col_no
       and wrrh_col_proj    = wpbh_col_proj
       and wrrh_proj_no     = wpbh_proj_no) loop
   if fun_name(rec.wpbh_col_lvd) = 'Y' then
    do something,
   end if;
end loop;
The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
Please advise.
Thanks.

Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.

10g forms applet very slow

I've just converted a couple of 6i client server forms to 10g.
I'm using the Developer suite 10gR2, with its own built-in oc4j server.
It all works fine, after some fiddling to get icons loaded etc.
But the form is 10 times slower than in client-server. This is a total show-stopper for us. A form that took 2-3 seconds to load before can now take nearly a minute to come up.
Even our very simple login form is slow, many seconds instead of a fraction of a second.
I've tested on the workstation thats running the OC4J, This is a Dual-Xeon 2.4Ghz with 2G of memory, so its NOT the hardware. Its running XP-Pro.
Then I tested on a workstation, using a dummy html page to launch Jinitiator and get the form up. JInitiator installed itself perfectly, but erformance is exactly the same even though its a P-III-800 with only 256M of memory.
The strange thing that we notice is that the performance monitor on the oc4j server machine shows it as almost idle (3% cpu, almost no network traffic and idle disk).
But on the workstation the cpu is at 80-90% all the time, even when the form is just sat there waiting for user input!
So we think we have some sort of applet mismatch or configuration problem. Is there a newer (or older?) applet version thats quicker, or doesn't nail the cpu this way?
My next step is to download just the forms-and-reports services for linux and put that up on a second identical box that has Redhat-ES.
Has anyone else seen this sort of applet behaviour? if so any suggestions would be a great help because we're stumped at the moment.

Good feedback folks, but I still don't see any explanations of whats happening, or why it should be slow.
I'll agree that putting the icons in a single file, one jar archive per form, is definitely more efficient. Putting all your icons in one file strikes me as silly since then you have to download all the icons, even if you never bring up forms that use some of them.
BUT gentlemen, it does not explain why we had the problem I described. I see no reason to suspect that the jar file would fix my problem, (of course I'll try anyway).
The point here is that the form was slow to start, OK, maybe that was because it was individually fetching 15 or 20 icon files.
BUT WHY SHOULD IT THEN BE SLOW AFTER THAT!
Sorry to shout but no-one seems to be hearing what I'm saying here:
1) the applet has the CPU locked-up at over 90% all the time
2) the cpu is at 90% when the form is idle waiting for input.
3) the form has completed painting the user interface just fine, I can see everying,
including all the icons, it all works right, its just slow.
4) its not surprising that its slow since the applet has the cpu pegged
5) we get the same pattern of behaviour on a form that has exactly one icon,
for a download of one file, a total of 232 bytes.
Now there is no way you can claim that a jar archive is significantly faster
than a single gif file download, they are both cached and the sizes are both so small that any difference is insignificant.
It looks to me like a bug in the applet, or some sort of configuration or set-up error on my part. But I can't find any documentation on how to control that. The applet itself appears to be very much a black-box with no visibility into whats going on inside it. No trace file, no log file, no debug options.
I mean debugging the applet itself here, not the form that the applet is presenting to the user.
I'm going to work on bringing it up on Linux today, for now I'll just run without icons while I get the forms/reports integration running. Then I'll come back to the icon issue next week. Maybe if I switch to jpegs the problem'll go away. SO I'll post a follow-up sometime next week.

10g Form - first execute query - very slow

I have the following issue:
Enter an application
open a form in enter query mode
first time execute query is very slow (several minutes)
every other time it's quick (couple seconds or less)
I can leave the form, use other forms within the app, come back and query is still quick. It's only the first time after initially launching the app.
Any ideas what might be causing this?

We have the same application running in 6i client/server DB-9i in production. We are testing the upgraded application that is 10g forms on OAS DB-10g. We don't have the issue in the current production client/server app.

Oracle Forms Performance very slow on the internet

Hi ,
We have developed a form application with forms Developer 10g and deployed it on a ORACLE 10g AS. If the user runs our application over intranet there is no any network problem or not any performance decrease occurs. However if we deploy our application over WAN or internet, the startup time of the forms become Very Slow.
What we can use to make it faster , is there any other tools we have to learn like APEX or JDeveloper , what is the best solution , should we forget the Developer for ever and starting with other tools with fast performance on the internet , if so , what we have to learn , please help us , its common problem .
any help please ,

Interesting thread....
You asked whether "Forms" is the right product for the job. Well, the answer to that question will depend entirely on exactly what functionality you need and your skill-set. One advantage of using Forms over other Oracle products is that, in my opinion, Forms allows you to create simple or complex applications very quickly, with limited development experience. The downside to using Forms however, is that it does use a fairly thick client making startup slower than other applications. Generally, Forms is not very well suited for Internet deployments although it can and has been done. If your goal is to use a product which is easy to work with and is appropriate for Internet deployment, you may want to consider Apex. The downside to Apex is that unlike Forms, Apex generates what I like to call static html pages. Meaning once a page is displayed for the end-user, the data on it remains the same until the user forces interaction with the server again, but in this case the entire page would be refreshed in order to realize the changes. In the case of Forms, any content displayed to the end-user can be change without completely refreshing their view. I like to refer to Forms as a living application because unlike Apex, it can easily respond to most user inputs and/or server side changes almost in real-time. If you want this "live" experience, Forms might be the way to go, although at the cost of some startup performance. Alternatively, Oracle ADF can also give you a similar live-like experience. However, ADF will require a broader skill-set (pl/sql, java, html, etc), whereas with Forms you could get away with only knowing pl/sql although java knowledge would be helpful.
The views expressed in this thread are my own and do not necessarily reflect the views of Oracle.

Code of conduct application form opening very slow

Dear Friends,
we have enable code of conduct application by implementing zform so when i click on code of conduct service in portal it is opening very slowly .
My client is complaining that is is opening very slow how can i make the form to appear quickly .
What can be the reason for the form to open very slow it is takign almost 3 min . How can i reduce this time.
Kindly suggest .
Best Regards

Hi Siddharth,
This is the problem with everuser and after some time it is showing the error as 500 internal server error with exception:java.net.Sockettimesout.Exception:Timedout
We have even taken the trace from OS level the following is the details of default trace file:
#1.#0021282821A600B8000000000000588F0004B80B81935B7A#1328259464911#com.adobe.document.PDFManipulation#com.adobe/AdobeDocumentServices#com.adobe.document.PDFManipulation#J2EE_GUEST#0##n/a##2342b5f04e4511e1946a0021282821a6#Thread[PDFManipulation.exe Error Reader,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###Service PDFManipulation: Native process (PID=24370) /usr/sap/TTD/DVEBMGS00/j2ee/os_libs/adssap/PDFManipulation/bin/PDFManipulation.exe terminated abnormally with error code 2#
Can you please let me know what could be the problem.
In the last week atleast we are able to open the form eventhough it is opened slowly not it is showing the error instead of form.
Regards.

Filling out form in FedEx Ship Manager is very slow...

All of a sudden trying to fill out a shipping doc in FedEx Ship Manager is very slow. Each letter typed ends up with athe spinning beach ball for 5 or 6 seconds. Safari version Version 6.1 (8537.71). Never had an Safari issue before with this site and Firefox works fine. (Ended up using FF to get the shipment done)
Any ideas what is going on?

Same here, I create many, many Fedex labels on a daily basis for work. In Mountin Lion things were working excellent, just upgraded to Mavericks and Fedex is unusable. Firefox (even in its latest version 25) works perfect with Fedex and on Mavericks too. This is definitely a problem caused by Mavericks and has nothing to do with FedEx. I think it is related to how security for JavaScript has been changed, or how Sandboxing in tabs and JavaScript relate to each other in the new version of Safari. No updates to the latest Java will fix it, because the fields on the FedEx form are populated through JavsScript coding and in this case Java is not being invoked at all. Thats why you may have different versions of Java installed, or not even have it installed, yet in Safari 7.0 those forms from FedEx and evidently form some other sites will beachball. So the only solution currently is to use another browser, which is really a lame solution. If Apple wants to make us use Safari more often, step up to the plate and show an improvement in the browser, not regressions. Mind you this is a huge regression! I have been creating labels in Fedex for some 7-8 years now and there has never been an update to Safari that would cause such a disaster. And by the way, I use Webkit nightlies. Granted the developers there tend to break things, but are very responsive and provide a fix usually within day or two. Those are the same guys that develop the new versions of Safari core and rendering, so I'm curious as to who would be voicing support here in the discussion. One thing is clear, even todays nightly of Webkit is also beachballing, so the problem is not directly related to Webkit.

Opening ADOBE forms is very slow.

Lately, once I enter my username and password, opening ADOBE forms is very slow.

Hi,
try on the icon of SAP on desktop go to properties and on the compatibility check disable desktop composition.
hope it helps
Petr

Opening of form is very slow

Hello,
I've installed SAP 2005A on a Vista computer.
My problem is the opening of the forms is very slow.
Does anyone knows the reason of that.
Thanks.

Hi,
try on the icon of SAP on desktop go to properties and on the compatibility check disable desktop composition.
hope it helps
Petr

Smart Form Very slow

Similar Messages

Maybe you are looking for