Smart Forms Basics

Hi Folks,
I am new to smartforms, just i am learning.
I had an issue , if anybody provides me guide lines i would b gr8ful.
I started by converting a script to smart form to know the flow of Sform.
i had used in one of the window a global variablewhich was available in corresponding driver program.
& itab-v1&.
But i am getting error when i want to activate the newly created ( which is migrated from script) like
FIELD &itab-v1& is unknown..
How to rectify the error..even i created an output type for this sform.
please advise.
Thanks
Raja.

Hi Raja,
I suppose your requirement goes like this.
Your are selecting the values from Z-table into an int.table itab and using a structure to display the values in smartforms.
In that case, this is how you have to proceed.
In the tables tab of Form Interface ,
define
ITAB TYPE Z-table.
In the Global data tab of Global definitions,
define
GTAB type z-table .
Now a work area is created.
Now you can create a loop from ITAB to GTAB.
Now you can make the text elements as GTAB-value.
Hope your query is solved.
Regards,
Sylendra.

Similar Messages

Smart Form basics

Does anyone have a basic and I mean extremly, step by step, Smart Forms tutorial?
I have been reading several posts, finding that this Smart Forms tool its awsome, but im still dont get it.
Thank you!

Hi Art,
This is not a training forum, so please google for the tutorials and you can also go through the e-learning and blogs parts in SDN for the basics of smartforms.
thanks
Somu

Text element not gettin refreshed in smart form

Hi
Text element does not get refreshed in the smart form preview.
I have a selection screen on which i have a few selection parameters and three application
toolbar buttons. "Save" , "Preview" and "Print". At the end of selection screen I have a
button "text" which when clicked takes me to the text element editor(FM 'TEXT_EDIT' )
I have to enter a project number on the selection screen, enter all other details and
then click on the "Text" button. I would then change /edit some text etc and come back
to sel screen. Now i click on preview , the smart form shows up and the text gets dispalyed
with the modified text.
I am passing the text name by appending "sometext" + project number to the TEXT_EDIT
and while eiditing and as a parameter to the smart form. In the smart form i have given the variable in the "include text".
Now Herez the problem.
I am still in selection screen and clik on the "text" button and it takes me to the
text editor. Now i add more lines, save and come back. Now i clik on preview
button and it displays the old text data.
When i come out of the transaction and renter , clik on the preview it displays data
correctly. Now if i repeat the steps
1.edit text button , add a few lines
2.preview button, shows data as entered in step 1.
3.edit text button, add few more lines
4.preview button .. the text displays is from step 1 and not 3.
I am not sure if this is lot of info for anybody to write an answer straight away but
if u need more info i can provide. I can do a read_text in the smart form but its toooooo
much of a pain for the data i need to display. million adjustments to be taken care of.
What could be the problem ? I have given all the basic settings like save parameter
in edit_text fm , checked all the print preview options in sdn.
Here are my questions
1. Why is the text element not getting refreshed.
2. After a form is displayed for preview , will it store anywhere in the buffer ? if yes
is there any method to clear it ?

Hi,
The problem is not with text elements, it might be your size of window which you are using to display the text elements. Check your window size and modify that accordingly.
Cheers,
Bujji

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

Creating a Purchase Order Smart Form (Form Interface)

After reading up on all the posts about making a PO smart form I know this:
- An SAP script "medruck" is the current output
- A smartform exists for PO's named "/SMB40/MMPO_L" or "/SMB40/MMPO_A"
- You need to install an update to get those smartforms if you are using ECC 6.0
So my dilemma is that the SAP administrator is on vacation for a week, so I can't install the update to our system. I'm trying to just create it from scratch using the medruck SAP script as a reference, but I am a little confused.
Basically all I need to know is what form interface parameters do I pass in? Meaning how do I find out what structures and tables are imported into the function module when print preview is called from t-code ME22N? Can you please provide proper syntax for form interface solution or instructions on how to determine imported variables into the smartform?

Hi
If the smartform purchase order is not available in your system
means you can download the form IDES and you can upload the form in ur ecc 6.0 system.we faced a similar kind of problem in our system and we did as i said.
Once you uploaded the things you can easily view the form interface and rest of the things related to smartforms.
Thanks and Regards
Arun Joseph

Regarding smart forms

hi ,
i am new to smart forms.i know how to create now smart forms ie creating new windows and inserting logo and text.i mean i know the basic things in creating a smart forms.i need some help on how to create po or invoice in realtime scenerio.i have gone thorugh some std forms available in sap.but could not know the exact reason n purpose they r defining the variables.kindly if any one have screen shots or soem documents pls help me..thanx in advance..

hi rahul,
check these links...
http://help.sap.com/saphelp_nw04/helpdata/en/9b/e3b0d9c2a711d3b558006094192fe3/frameset.htm
http://cma.zdnet.com/book/abap/index.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
hope these help,
priya.

Table in smart form - BOLD

Hi ,
We are not able to make the texts displayed in the table inside the main Page of a smart form
in BOLD or italics..Basically none of the styles are getting applied. We are using Aerial font..
Any suggestions of how to make it work.
Thanks,
Sharadha

Hi Shradha,
For the window in which you are going to display the contents make a new smart style (tcode : smartstyles) in which select the font according to your requirements i.e. bold.
Hope this will help you.
Thanks,
Nitesh Jain

How to display Smart form in Multiple Languages ?

Hello,
Very Good evening!
How can I print the Smart Form in Multiple Languages like Korea, German and Japneese....
I got a requirement where I need to display the developed Smart form in these languages. As of now it is displayed only in the Language ENGLISH.
Any Suggestions will be appreciated!
Regards,
Kittu

Hello kittu....
I would recommend that you create a single Smart Form in the primary supported language (or the one which you're most comfortable maintaining forms). Embed all necessary logic in this form, and design it with the idea that it would need to be viewable in multiple languages .
Then use transaction SE63 to translate all necessary form components into each desired language -- one by one -- and they will all be bound together under the same form name. In my experience, a basic multi-column spreadsheet (put together with the guidance of professional translators) works well as a translation guide.
The advantages of a single, shared form include: consistent look and feel, avoiding dual maintenance for shared logic (or, in your case, up to 10x maintenance), and simplified output determination. On the other hand, a single form does constrain your design and can make for a more complex implementation.
Hope this is useful
Best of luck,
Bhumika

Printing Chinese Characters in Smart Forms

Hi,
Iu2019m trying to print Chinese characters via smart forms. However during print preview or print, all Chinese characters are showing as # symbols.
I have researched and implemented for some possible solutions posted in the forum like:
a.) Setting the regional language control panel.
b.) Activating the multi-byte function in I18N.
c.) Checked the output device is SWINCF.
d.) Control parameter language is ZH (Chinese).
Unfortunately it still doesnu2019t solve the problem. Any input is highly appreciated.
With regards,
Marc

Remark following basics:
Forms:
Language of the form must be: "ZH".
Due to a SAPNOTE only font family CN* (CNSONG etc.) is mapped.
For frontend print, you must install chinese true type on you local PC and print via "CNSAPWIN" .
For backend print, you must install neccesaary fonts in your printer to the resident fonts. You must use a printer like "CNHPL4" or so.
For PDF archiving, you must upload truetype fonts to application server -> basis guys.
Cascading Fonts:
If you mix different subfonts to unicode areas, you must use CNSAPWINCF.
Until now, only frontend printing is available.
Note:
Spool created for back end print with print preview is only a simulation of getting a picture of the output created with front end technology. So it can differ, when the printer does not have the resident fonts.
Regards,
Christian

Smart forms convert to pdf binary data

Dear All,
I'm working on smart forms integrations with .net and I need to send the smart forms PDF binary data though custom rfc .
For that i'm converting smart forms otf data to pdf in and pass this data through rfc but this idata is is not wokring on .net guys when they are converting this on pdf..
so is there any need of decoded smart forms otf data before passing through or i'm missing some basic step?
Please guide me?
Rg
Anuj

hi,
Have a look on this wiki:
[http://wiki.sdn.sap.com/wiki/display/Snippets/SmartformoutputtoPDFformat]
And maybe this one could also interest you:
[|http://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment]
regards
mickael

Flow of smart form

Hi all
We are using print program , functional module , include pgms in a smart forms. can any one explain how is the flow..?
Thanks
vivek

Vivekkv,
    The function module SSF_FUNCTION_MODULE_NAME basically takes the nice friendly name of your smartform (I.E. Z_Invoice_Smartform) and returns the name of the function module which actually is your form (I.E. /1AFEWB/SF00000055 ).
This value will be returned in a parameter from SSF_FUNCTION_MODULE NAME (say LV_FORM_FM). You will then call that variable like CALL FUNCTION LV_FORM_FM along with the parameters that the form will require.
   Now, understanding that, the exact process will likely be
Print Program->More than likely an Include->
CALL FUNCTION SSF_FUNCTION_MODULE_NAME
Exporting
formname =   'Z_INVOICE_SMARTORM'
Importing
   fm_name = LV_FORM_FM.
-> CALL FUNCTION LV_FORM_FM
IMPORTING
EXPORTING
Hope this helps. That's basically the exact process, but it will differ slightly here an there depending on the print program you are working with or what you decide to write...

Convert Adobe form to smart form

Hi,
I have created adobe form. Is it possible to convert that now as smart form? I have seen the migration options for smartforms to adobe form. But please confirm if the reverse is possible and how?
Regards,
Bhuvana

Howdy,
They are basically asking you to rewrite the form from scratch - better off waiting until the basis issue is resolved.
It's possible that the issue would still exist when you view the PDF spool of your Smartform too.
Cheers
Alex

Regarding smart forms (really urgent)

hi,
i am new to smartforms and i got report to make changes in the smart forms,plzz help me out as i know nothing about the smart forms by providing me it in easiest & simplest form.
if find useful help will be deifnately rewarded.
Edited by: ric .s on Mar 6, 2008 5:16 AM

Hi,
This Smartform Information I read, really helped me out.
I think it would be of some good help to you too..
What is SAP Smart Forms?
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
Advantages of SAP Smart Forms
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
A Simple Smartform Tutorial
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
          Pages and windows
     First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
     Main windows -> TABLE -> DATA
     In the Loop section, tick Internal table and fill in
     ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
           Global settings :
           Form interface
           Variable name    Type assignment   Reference type
           ITAB1               TYPE                  Table Structure
           Global definitions
           Variable name    Type assignment   Reference type
           ITAB2               TYPE                  Table Structure
4. To display the data in the form
    Make used of the Table Painter and declare the Line Type in Tabstrips Table
     e.g. HD_GEN for printing header details,
             IT_GEN for printing data details.
     You have to specify the Line Type in your Text elements in the Tabstrips Output options.
      Tick the New Line and specify the Line Type for outputting the data.
      Declare your output fields in Text elements
      Tabstrips - Output Options
      For different fonts use this Style : IDWTCERTSTYLE
      For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
                    http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
   MOVE-CORRESPONDING MKPF TO INT_MKPF.
   APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSMARTFORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    GS_MKPF                    = INT_MKPF
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5.
if sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Additional Fonts for your SMARTFORMS
You can create additional fonts and style with transaction SMARTSTYLES
This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form.
The character formats includes effects such as superscript, subscript, barcode and font attributes.
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated.
f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format. In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment.
In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to create a Transport and then FTP down to your local harddisk.   When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
FAQ on Migrating SAPscript to SmartForms
Is it possible to migrate a SAPscript form to a Smart Form?
Smart Forms provides a migration tool for this purpose which migrates layout and texts of a SAPscript form to a Smart Form. It does not migrate SAPscript form logic of the print program. Using Smart Forms, this logic is described by the tree structure of the Form Builder. The effort involved in migrating it depends on the complexity of the print program.
Which Basis Release do I need to use SAP Smart Forms?
SAP Smart Forms is available as of R/3 Basis Release 4.6C.
I have heard that Smart Forms replaces SAPscript. What does "replace" mean?
It does not mean that SAPscript is removed from the Basis shipment. Even as of Basis Release 4.6C, SAPscript remains part of the SAP standard and there are no plans to remove it. Since Smart Forms is currently, and will continue to be, the tool for form maintenance for mySAP.com solutions, our further development efforts will focus on Smart Forms, not on SAPscript.
Do we have to migrate all SAPscript forms to Smart Forms?
There is no point in migrating all SAPscript forms already in use. Since SAPscript can still be used and will be available in the future, there is no need to. If you plan to migrate a SAPscript form, it is recommended that you check whether benefit is worth the effort involved
Conversion of SAPSCRIPT to SMARTFORMS
SAP provides a conversion for SAPscript documents to SMARTforms.
This is basically a function module, called FB_MIGRATE_FORM. You can start this function module by hand (via SE37), or create a small ABAP which migrates all SAPscript forms automatically.
You can also do this one-by-one in transaction SMARTFORMS, under
Utilities -> Migrate SAPscript form.
You could also write a small batch program calling transaction SMARTFORMS and running the migration tool.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Smart forms Frequently Asked Questions
Forcing a page break within table loop
Create a loop around the table. Put a Command node before the table in the loop that forces a NEWPAGE on whatever condition you want. Then only loop through a subset of the internal table (based on the conditions in the Command node) of the elements in the Table node.
Font style and Font size
Goto Transaction SMARTSTYLES.
There you can create Paragraph formats etc just like in sapscript.
Then in your window under OUTPUT OPTIONS you include this SMARTSTYLE and use the Paragraph and character formats.
Line in Smartform
Either you can use a window that takes up the width of your page and only has a height of 1 mm.
Then you put a frame around it (in window output options).
Thus you have drawn a box but it looks like a line.
Or you can just draw "__" accross the page and play with the fonts so that it joins each UNDER_SCORE.
Difference between 'forminterface' and 'global definitions' in global settings of smart forms
The Difference is as follows.
To put it very simply:
Form Interface is where you declare what must be passed in and out of the smartform (in from the print program to the smartform and out from the smartform to the print program).
Global defs. is where you declare data to be used within the smartform on a global scope.
ie: anything you declare here can be used in any other node in the form.
Smartforms function module name
Once you have activated the smartform, go to the environment -> function module name. There you can get the name of funtion module name.
The key thing is the program that calls it. for instance, the invoice SMARTFORM LB_BIL_INVOICE is ran by the program RLB_INVOICE.
This program uses another FM to determine the name of the FM to use itself. The key thing is that when it calls this FM (using a variable to store the actual name), that the parameters match the paramters in your smartform.
Another thing to note is that the FM name will change wherever the SF is transported to.
So you need to use the FM to determine the name of the SF.
Here is the code that can be use to determine the internal name of the function module:
Code:
    if sf_label(1) <> '/'.    " need to resolve by name
      move sf_label to externalname.
      call function 'SSF_FUNCTION_MODULE_NAME'
           exporting
                formname           = externalname
           importing
                fm_name            = internalname
           exceptions
                no_form            = 1
                no_function_module = 2
                others             = 3.
      if sy-subrc <> 0.
        message 'e427'.
      endif.
      move internalname to sf_label.
    endif.
It checks to see if the sf_label starts with a '/', which is how the internal names start. if it does, the name has already been converted. If not, it calls the FM and converts the name.
You would then CALL FUNCTION sf_label.
Smartforms FAQ Part Two
Smartforms output difference
Problem with Smartforms: in a certain form for two differently configured printers, there seem to be a difference in the output of characters per inch (the distance between characters which gives a layout problem - text in two lines instead of one.                                      It happens when the two printers having different Printer Controls' if you go to SPAD Menu (Spool Administrator Menu) you can see the difference in the Printer Control and if you make the Printer control setting for both the printers as same. then it will be ok. and also u have to check what is the device type used for both the output devices.
SmartForms Output to PDF
There is a way to download smartform in PDF format.
Please do the following:
1. Print the smartform to the spool.
2. Note the spool number.
3. Download a PDF file (Acrobat Reader) version of the spool by running Program RSTXPDFT4 and entering the noted spool number.
SmartForm Doublesided printing question Your customer wants your PO SmartForm to be able to print "Terms and Conditinos" on the back side of each page. They don't want to purchase pre-printed forms with the company's logo on the front and terms & conditions on the back. Now this presents an interesting problem.
Has anyone else ever had a request like this? If for example there was a 3 page PO to be printed, they want 3 pieces of paper, the front side of each to containe the PO information (page 1, 2, and 3) and the back side of each piece of paper to containg the static "Terms & Conditions" information.
Anyone have a clue how to force this out?
Easy - page FRONT lists page CONTACTS as next page and CONTACTS lists FRONT as next page. Since CONTACTS does not contain a MAIN window, it will print the contacts info and then continue on to FRONT for the rest of the main items. Additionally, set print mode on FRONT to D (duplex) and set CONTACTS to 'blank' (for both resource name and print mode - this is the only way to get to the back of the page).
Transport Smart Forms
How does one transport SMARTFORM? SE01?
How do you make sure that both, the SMARTFORM & it's function module gets transported? Or does the FM with same name gets generated automatically in the transported client?
A smartform is transported no differently than any other object. if it is assigned to a development class that is atteched to a transport layer, it will be transported.
The definition is transported, and when called, the function module is regenerated.
This leads to an interetsing situation. On the new machine, it is very likely the function module name will be different than the name on the source system. Make sure, before you call the function module, you resolve the external name to the internal name using the 'SSF_FUNCTION_MODULE_NAME' function module.
Typically, generate the SF, then use the pattern to being in the interface. Then change the call function to use the name you get back from the above function module.
Smartforms: protect lines in main window.
How to protect lines in the main window from splitting between pages?
It was easy with SAPscript, but how to do it with SF's.   For 4.7 version if you are using tables, there are two options for protection against line break:
- You can protect a line type against page break.
- You can protect several table lines against page break for output in the main area.
Protection against page break for line types
- Double-click on your table node and choose the Table tab page.
- Switch to the detail view by choosing the Details pushbutton.
- Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option.   All table lines that are in the file with the Page Protection option set are output on one page.
Regards,
Rohini.

Hands on SAP Smart Forms

Hi Frendz,
Can you pls give me any exercise on Smart forms ? i am learning sap smart forms.
Points for sure
Vijaya

Check This...
www.sap-press.com/downloads/h955_preview.pdf
help.sap.com/bp_presmartformsv1500/html/EXAMP.HTM
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name    Type assignment   Reference type
ITAB1               TYPE                  Table Structure
Global definitions
Variable name    Type assignment   Reference type
ITAB2               TYPE                  Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
        IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
                    http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
   MOVE-CORRESPONDING MKPF TO INT_MKPF.
   APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSMARTFORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    GS_MKPF                    = INT_MKPF
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5.
if sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Additional Fonts for your SMARTFORMS
You can create additional fonts and style with transaction SMARTSTYLES
This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form.
The character formats includes effects such as superscript, subscript, barcode and font attributes.

Smart form development steps

pls send me how to developed a smart forms with one example .

hi,
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name    Type assignment   Reference type
ITAB1               TYPE                  Table Structure
Global definitions
Variable name    Type assignment   Reference type
ITAB2               TYPE                  Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
        IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
                    http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
   MOVE-CORRESPONDING MKPF TO INT_MKPF.
   APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSMARTFORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    GS_MKPF                    = INT_MKPF
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5.
if sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name    Type assignment   Reference type
ITAB1               TYPE                  Table Structure
Global definitions
Variable name    Type assignment   Reference type
ITAB2               TYPE                  Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
        IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
                    http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
   MOVE-CORRESPONDING MKPF TO INT_MKPF.
   APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSMARTFORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    GS_MKPF                    = INT_MKPF
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5.
if sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
regards,
sreelakshmi

Smart Forms Basics

Similar Messages

Maybe you are looking for