Smart forms print with EPSON LQ-2500

HI all,
I have a problem that my EPSON printer can not print all the lines of the table in Smart-forms. And always the same lines can not be printed. If I output the form with PDF Printer first, then, I print the PDF file with my printer, it would be quite well. So I think there should be sth. wrong with my programe or settings in SPAD. Is there someone can help me to solve this problem? Many thanks!

Hi Anji and Ravi,
thank you for your reply; in Quality and PRD the character format "H" exists
and in effect the format of text type A is correct.
Also the angular brackets are correct <\>.
Regards. Paolo
Message was edited by:
Paolo Cavallini

Similar Messages

SAP Vendor Master Communication Details for SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi Ravi,
I don't know about a function module, but the vendor master table LFA1 has a field ADRNR pointing to the general address table with the fields for e.g. language and to the tables ADR2 for phone numbers, ADR3 for fax numbers and ADR6 for e-mail addresses.
BR
Raf

Communication Details Vendor Master SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi,
class VMD_EI_API_EXTRACT with method GET_DATA could make it.
There are also some eSOA services that could make it fine. See services starting with Supplier*.
Otherwise, this is more complicated.
BR
Alain

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Regarding Smart Form Printing, Print Preview issues

Hi,
I have couple of issues regarding Smart Form Printing, Print Preview.
In my program i am passing below parameters to smart form function module:
t_control-device = c_printer.
t_control-no_dialog = space.
t_control-preview = space.
t_control-no_dialog = c_x.
t_output-tddest = g_spld.
t_output-tdimmed = c_x. " Print Immediately
t_output-tddelete = space. " Don't Release spool after output
g_user_settings = c_x.
Issue#1: Though i have set preview paramter to space, after executing program it is prompting for Preview Screen, There again i have to give printer name though i am passing printer name as above and i need to hit on print preview button to set Layout output.
Here how can i go directly to layout output without preview screen.
Issue#2: In some cases we need to Print the layout set output after executing program immediately without prompting for preview screen and then Layout set output should also be shown after printing the output.
How can i solve these issues!
Thanks in advance.
Thanks,
Deep.

Hi,
In the SAP menu screen goto <b>System->User Profile->Own data</b>
There in the defaults tab, for the output device give the value you had maintained for <b>g_spld.</b> This will not prompt you a dialog screen, and if you want to print immediately select the checkbox as well. Then try to execute the smartform. Hope this solves ur issue.
Tushar

Regarding Smart Form Printing

related to smart form printing :
I have to print the data using template , but i dont want to fix the line in template ,
i want to take the data in template , and how much data is accessed that much space
must be occupied on the page, i dont want to fix the area in template
Hope you have got me.
Edited by: rihano7 mansoori on Jul 13, 2011 2:48 PM
Edited by: rihano7 mansoori on Jul 13, 2011 2:49 PM
Moderator message: please choose more descriptive subject lines for your posts.
Edited by: Thomas Zloch on Jul 13, 2011 3:53 PM

Hi,
Do you intend to say , that template cell size should vary depending on your data.
I doubt that is possible.
You should look for a workaround.
Why dont you be more specific in your exact requirment, so that an alternate soln can be found.

Issue Regarding Chinese characters In Smart Form Print preview..

Hi All,
I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
Now the problem is even if I login using EN or ZH the below issue I am facing always.
In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
Please help..
Thanks in advance.
Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

Sap smart form printing error

hi!
I am trying to print one smart from through print program.
the name of smart form is ztestform.
and the name of the function module is /1BCDWB/SF00000099
I am writing following print program.
REPORT ZSMARTFORM.
data fname(30).
CALL FUNCTION '/1BCDWB/SF00000099'
EXPORTING
formname = 'ztestform'
IMPORTING
fm_name = fname.
call function fname.
and it returns with the error " function parameter form name is unknown"
so what should i do?
points will be awarded.
Cheers
Troy.

Hi Troy,
           Use FM SSF_FUNCTION_MODULE_NAME.
pass smartform name . it will give u SF function name. u call that fm.
Please refer this code :
data : p_form type TDSFNAME.
       CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      FORMNAME                 = P_FORM
VARIANT                  = ' '
DIRECT_CALL              = ' '
   IMPORTING
     FM_NAME                  = P_FUNCTION
   EXCEPTIONS
     NO_FORM                  = 1
     NO_FUNCTION_MODULE       = 2
     OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION P_FUNCTION
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
    TABLES
      D_VBRK                     = IT_VBRK
      D_VBRP                     = IT_VBRP
      D_LIKP                     = IT_LIKP
   EXCEPTIONS
     FORMATTING_ERROR           = 1
     INTERNAL_ERROR             = 2
     SEND_ERROR                 = 3
     USER_CANCELED              = 4
     OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if helpful.
Regards,
Hemant

Smart form printing without dialog box

Hi,
Thanks to eveyone for reading this post.
I want to print a form thru smartform. I am able to do that now by calling that smart form and passing the data. Now i wanted to print multiple docs using smartform so that the dialog box printer doesnt apppear and all printing is executed without any user intervention.
I tried to call smart form in the following way so that data is printed to the printer without any thing appearing on the screen (dialog box).
I did consult the forums here and when i try it I either see the dialog box or see other sy-subrc.
Code -
Data: w_ctrlop TYPE ssfctrlop,
         w_compop TYPE ssfcompop.
W_COMPOP-tdnewid   = 'X'.
W_COMPOP-tdFINAL   = 'X'.
W_COMPOP-tdimmed   = 'X'.
W_COMPOP-tddelete = 'X'.
W_COMPOP-tdcopies = 1 .
*W_COMPOP-TDNOPREV = 'X' .
W_COMPOP-TDDEST    = 'LP01'.
*W_COMPOP-tdnoprint = 'X'.
W_ctrlop-DEVICE    = 'PRINTER'.    " Here we dont give printer name 'KX-P3696'.
w_ctrlop-no_dialog = 'X'.
w_ctrlop-preview   = ''.
CALL FUNCTION '/1BCDWB/SF00000135'
*CALL FUNCTION v_form_name
EXPORTING
    control_parameters = w_ctrlop
    output_options      = w_compop
    user_settings       = 'X'
IMPORTING
    job_output_info    = w_return
EXCEPTIONS
    formatting_error   = 1
    internal_error     = 2
    send_error         = 3
    user_canceled      = 4
    OTHERS             = 5.
i would be glad if anyone can help me. I did a few RND in the code above to make it work but it dosent.
Moreover when the dialog box appears then there is a text in the bar below which says please maintain printer master data. (something like that). Is that creating a problem ?
Thanks,
JG

REPORT ZANNTEST.
Data Declarations
DATA : control TYPE ssfctrlop,"Smart Forms: Control structure
            output_options TYPE ssfcompop,"Smart Composer (transfer) options
             v_fm TYPE rs38l_fnam."Form Name
control-preview = 'X'."Preview the output of Smartform
control-no_dialog = 'X'."Don't show Dialog
output_options-tddest = 'LOCL'."Spool: Output device
output_options-tdnoprint = 'X'."No printing from print preview
Function Module to get Generated Fucntion module of Smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname                 = 'ZCONEXTNLETTER' " your created zform
IMPORTING
   fm_name                  = v_fm
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_fm
EXPORTING
   user_settings            = ' '                         " don't forget this option
   control_parameters       = control
   output_options           = output_options
    PR_PERNR                = '00001019'   " it wil come from ur form parameters
    PR_BEGDA                = '19940101'   " it will come from ut form parameters
EXCEPTIONS
   FORMATTING_ERROR         = 1
   INTERNAL_ERROR           = 2
   SEND_ERROR               = 3
   USER_CANCELED            = 4
   OTHERS                   = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is the best answer for ur requirement..
lets njyyyyyyyyyyy..

Printing with epson r1900 and cc photoshop

I have just purchased a new windows 8 computer and have cc photoshop installed. when trying to print with my epson r1900, the only print options available are landscape or portrait and paper size letter or a4. has anyone else had this problem and if so, how did you solve it.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=94511&infoType=Downloads&plat form=OSF_W_8-32

Smart form problem with multiple pages & table problem

Hi experts,
I have a problem with my smart form with multiple pages
Situation: I have a smart form that ALWAYS has at least 2 pages. In one page the quotation, in the second page (basically this is the 3rd page as the 2nd page is optional) the terms and conditions. Sometimes however, when there are many items in the quotation more than 1 page is needed for the quotation.
The (optional) second page of a quotation has a different header than the first page of a quotation. So I made a second page with 2 secondary windows (where the header texts are in). The main window is after the secondary windows and has to finish the quotation.
The problem is that my headers of the second page are never printed, it stays a blank space. The table however does continue and is printed.
Another problem I have is that I have a table (with the quotations) with 6 columns. The first 2 columns are displayed correctly but once the 3rd column the columns are shown on a lign below.
Regards,
PJ

I would suggest another approach to this problem.
Use just one page. For the headers on the first page, use a secondary window and on the conditions tab, choose the additional event - Only on First Page.
For the different header on the second page, create another secondary window on the same page (probably even overlapping the first header on your layout). But in this one, on the conditions tab, choose the additional event - Not on First Page.
The table should flow as you would be using the Main window for this one.
As for columns, if they are too wide and wont fit in the same line, it would move to the next line. So you would have to re-adjust the line width and test.
Hope this resolves your problem.
Regards,
Ancy
Edited by: abapfreak on Oct 4, 2010 11:52 AM

Export Documents - Smart Forms - Print program

Hello,
I searched the sap notes to find standard print programs from SAP for the export documents with message type:
FECO
FETR
FEEU
The smart forms are easy to find.
They are FT_COM_FEEU, FT_COM_FETR, FT_COM_FECO.
But I don´t find the print programs belonging to the forms.
Greetings
Mark

If you look at the SMARTFORMS they are all blank.
I would create your own SMARTFORMS and call them in a similiar way as the example programs listed below :
SF_EXAMPLE_01
SF_EXAMPLE_02
SF_EXAMPLE_03
Hope this helps.
Cheers
Colin.

HP smart web printing with vista home premium and IE7

hello,
>my computer is HP pavillion slimline s7700n , printer AiO C4340, OS vista home premium 32 bit, IE is 7
>i just install HP smart web printing....this software work good when i am at my netzero main page (icon,clip, edit and print)
>
>i try to change browser (google chrome...found the icon...send it to IE toolbar...it work a couple of times...then died)
>
>HP/SWP icon is there on IE toolbar...clip book is there....alll clips are there....BUT editor show blank page only, so are prints.
>i can not understand why . i hope somebody can help.
>thanks

Driver_Found wrote:
I have installed Windows Vista 64-bit on a new computer (HP of course) and want to be able to use HP's "Smart Web Printing" software. I have used it quite a bit on a Windows XP machine and love it. Looking at the download page, it appears that the Smart Web Printing software is not compatible with Vista 64-bit. Is this correct? Will a new version be coming out that will be compatible?
Have you tried installing it anyways and see what happens?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Smart Form printing issue in repeate page

Hi,
We have one smartfforms printing some notification details in which Only one page layout is use and it is repeated again at one block Upper margin is 18.23 and Height is 9.60 CM on first page it is printing properly but on second page it is stating at Upper margin is 18.23 properly but not printing total height it is printing only two rows on second line.
how to solve it
the block is a interbal table and it is printing material and qty. of that table if material is more means there are more than 8 material then it is printing only upto 11 rows remaining rows it is not printing.
regards,
zafar

Hi zafar,
I searched SAP.COM for you:
[Smart Form Trace|http://help.sap.com/saphelp_nw70/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm]
Transaction Smart Form Trace, switch on, level 60 Fields. Process smartform. Analyze.
What is the remaining question?
Regards,
Clemens

Creating a pop window in smart forms runtime with text entry

Dear Experts,
I Need to Create a pop window ( in run time of smart forms ) in which the user can enter some text and that text needs to be populated in the smart forms ouput.
i know that I can write code inside smart forms to do it.
I dont know when where and what to done to achieve this functionality.
Can any of you help me out in this scenario.
WIth Thanks and Regards
Ravishankar Vembu.

HI
Where u want to call this POPUP.
u can call the popup in INITIALIZATION tab and in PROGRAM LINES also.
eg.. create program lines--> call the FM
data: V_SVAL type sy-ucomm.
CALL FUNCTION 'ACE_POPUP_WITH_4_OPTIONS'
IMPORTING
ANSWER = V_SVAL.
when u call the smatform the popup will be displayed automatically
Please Close this thread.. when u r problem is solved. Reward if Helpful
Regards
Naresh Reddy K

Smart forms print with EPSON LQ-2500

Similar Messages

Maybe you are looking for