Smart groups in iCloud not working!?

smart groups are great but totally useless if they won't appear on your iphones / iPad , ...
any hints / workarounds out there?

I just found a 99 cent app called Smart Groups. Requires that you create a new group and assign your rules again but then picks up your key words or others reference. A quick test seemed to work. It appears that you have to compose the email from the app, so I expect it may be limiting but better than nothing for my applications. I certainly hope apple intends t o fix this!

Similar Messages

  • Iphone 6 backup to iCloud not working

    Initially I had the issue where my phone was restoring from iCloud for 2 weeks and never finished. I was unable to do the upgrade to 8.1 because of this, so I canceled the restore and tried to do a backup to iCloud. I let it run (Estimating time remaining...) for a long time, like 30 minutes or something. Each time I tried this it would error off saying it couldn't finish the operation. One time it said it was going to take 2 days to complete the backup, but then it errors off as just mentioned. So I did a google search for "iPhone 6 backup to iCloud not working" and found a link to the forums for the incessant restore issue, it said to do a manual backup through iTunes, then immediately do a restore, then do the upgrade to 8.1.
    However, I still have the issue of the backup taking forever.
    Anyone encounter this issue and find a fix?
    Many thanks.

    I suggest you contact Apple Support.

  • My "Group" feature is not working in Pages 5.0.1. Any help here?

    My "Group" feature is not working in Pages 5.0.1. Any help here?

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about th eamount of folks affected!

    request to post Icloud not working locations. for 2 days almost from Ventura CA. I think they are not being truthful about the percentage of folks affected!
    and what's with the minimalist response? We're working on it for 2 days? You can do beter than that for exsisting loyal customers can't you?

    I just spoke to a Support person with Apple.  I got the same answer, "We Don't Know", "but they are working on it...Blah, Blah.  I too live in Ventura, and have been without email since yesterday approx. 3:00 pm.
    The guy said, it's the same if you brought your computer into the shop.  We have to determine if it's hardware, or software, then fix the problem.
    Well, What about a BACK UP SERVER?  No real answer to that one.  Just, "Thanks, for your Patience."
    This really blows!!!

  • New Smart Playlist Keyboard Shortcut Not Working

    Using iTunes 7.5/Leopard 10.5.1
    The shortcut for creating a new smart playlist (optcmdN) is not working. However, I can use the keyboard shortcuts for creating a new folder or a new playlist. Any of you have the same problem?
    Thanks!

    OK...this might be too simple to possibly be the answer...but is the number lock key down on your keyboard?
    EDIT: Well... no, that can't be it...or the new folder and new playlist keys wouldn't work either. Have you downloaded any widgets or third-party apps recently?
    Message was edited by: Diane Wordsmith

  • Project Server 2010 - Project Permissions - Users and Groups filter is not working

    Hi,
    While giving permissions from project center ribbon on a project - Users and Groups filter is not working, we are not able to filter any user.
    I am not sure why this error is occurring  i tried giving permissions by opening the project  but still the same filtering is not happening. Below is the screen shot
    We have installed Service Pack 2 and June 2014 CU recently will this effect ?
    Can any one throw some light on this??
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    Hi Geetha,
    Which IE version are you using? First I'd try to add the URL to the compatibility mode sites, then to the trusted sites (if it is not done already). Then I'd try to set the default browser as IE8 or 9 (pressing F12, developer tool).
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Why is my iCloud not working.

    Why is my iCloud not working.when I try and update apps,it doesn't load.i recently got an iphone5 a few days ago,so I transferred everything from my old iPhone to my new one.please,someone help

    Your question is a bit confusing. iCloud doesn't have anything to do with updating your apps. What is not working with your iCloud? What are you trying to do? What happens when you try? What error messages are you getting?
    How are you attempting to update your apps? What happens when you try? What error messages are you getting?
    Best of luck.

  • Iphone 4 icloud not working

    icloud not working on my iphone 4, the moblie me app is still on phone, so i dont thank that icloud is working

    If you migrated your MobileMe account to iCloud you can continue to use your MobileMe Apple ID/login for iCloud.  Also, I assume by "MobileMe app" you are referring to iDisk.  If so, you can continue to use iDisk, and the iDisk app through June 30th.  If you are having trouble getting iCloud to work, try deleting the account from your phone and adding it back.

  • My HP photo smart  C6280 printer does not work with CS6.  Any Help?

    My HP photo smart  C6280 printer does not work with CS6.  Any Help?

    How does it "not work"?
    What OS version are you using?

  • Policies assigned to groups - membership changes not working

    I have a single ZESM IR8 server setup.
    All security throughout my environment, ZESM and otherwise, is based on group membership.
    If I change a user from one group to another group this change does not reflect in their policy assignment.
    Scenario: GroupA = standard user policy, GroupB = power user policy.
    UserA was first in Group A and therefore got the standard user policy.
    UserA now requires the power user policy.
    Remove UserA from GroupA and add UserA to GroupB (in iManager).
    UserA does NOT get the "power user" policy that is assigned to GroupB
    Am aware that I can assign the policy at a user level but this is NOT an option in my environment. All security assignments MUST happen at a group level.

    What you observed is the expected behavior.
    ZESM doesn't updates group membership in real time once a policy has been published. I've described this behavior on previous posts.
    What the MC does behind the scenes when you click "Publish" on a container or group object is to assign the policy individually to each member/user. For groups, it resolves membership at the time the policy is published then the MC iterates among each member assigning the policy to each of them. That's why you don't see updates once the policy is published.
    Try Updating the published policy to see if that works. From the docs:
    Updating a Published Policy
    Once a policy has been published to the user(s) or computer(s), simple updates can be maintained by editing the components in a policy, and re-publishing. For example, if the ZENworks Endpoint Security Management Administrator needs to change the WEP key for an access point, the adminstrator only needs to edit the key, save the policy, and click Publish. The affected end-users and computers receive the updated policy (and the new key) at their next check-in.
    >>>
    From: laurabuckley<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 12/15/2009 7:16 AM
    Subject: Policies assigned to groups - membership changes not working
    I have a single ZESM IR8 server setup.
    All security throughout my environment, ZESM and otherwise, is based on
    group membership.
    If I change a user from one group to another group this change does not
    reflect in their policy assignment.
    Scenario: GroupA = standard user policy, GroupB = power user policy.
    UserA was first in Group A and therefore got the standard user policy.
    UserA now requires the power user policy.
    Remove UserA from GroupA and add UserA to GroupB (in iManager).
    UserA does NOT get the "power user" policy that is assigned to GroupB
    Am aware that I can assign the policy at a user level but this is NOT
    an option in my environment. All security assignments MUST happen at a
    group level.
    laurabuckley
    laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
    View this thread: http://forums.novell.com/showthread.php?t=395870

  • Smart groups in iCloud but not on Mac

    I'm not sure exactly how to word the subject, but here's what hapenned:
    Upgraded from Snow Leopard to Mountain Lion.  I activated iCloud for that Mac aftwards
    All seemed fine for a while until the first time I tried to send mail to Smart Groups that I had previously had set up from other address groups in Snow Leopard.  That caused mail to crash repeatedly upon opening until I figured how to delete the outgoing message before it crashed.
    Those Smart Groups no longer seem to be populated in my Contacts list.  Neither do the groups under "On My Mac" in Contacts.  They still appear but have no addresses within them.
    Yet when I go to iCloud.com or select the groups within the iCloud section of Contacts, they do appear.
    How do I get my Smart Groups repopu on my Mac?

    Both Eric Root and Csound1 helped me with restoring the contacts into those "On My Mac" groups.  I exported from the iCloud list and imported back into the "On My Mac" groups (creating new ones as needed.
    I'm still having problems when I try to mail using the smart groups that draw from those groups.  When I type in the To block the name of the smart group they apper in bold, but when I try to send they crash mail.  Do I have to remove the name of the smart group from my previous recipents window to get them to grab the right address.

  • Group contacts did not work correctly since IOS 6

    Hi Guys,
    since update from IOS 5.1.1 to IOS 6.0 it isn't possible to show groups in Contact seperatly.
    Neither on my IPHONE 4 and now on my IPHONE 5.
    In IOS 5.x.x it was possible to list seperate groups.
    I tried this with my ICLOUD Account and also with my GMAIL Account.
    I need to have different group lists for my work - e.g "Private", "Work", ...
    In IOS 5.x.x it was possible to list the contact folder, than  click on "groups" and there it was possible to select the group i wanted.
    Than I've only seen the contacts from the selected group.
    Now since update to IOS 6 it doesen't work like this. There is only the opportunity to mark or unmark a contact group to list it seperately.
    Can You explain how this is going to work on IOS6 ??
    Or do You know an application to group contacts seperatly.
    I set up my GMAIL Account as "Exchange Account" to see the contact groups.
    It's nessecary that it syncronises correctly with my GMAIL Account, because I also use an IPAD.
    I've over 250 contacts, so it has to work correctly.
    I can't understand, why apple removed this feature in IOS 6.
    I hope you know what I mean.
    Very nice greetings
    Roland

    Do you really have them all? I created a group I wanted and synced the phone. Now my phone contacts has 2 groups, all contacts and phone contacts. However, when I scroll to the bottom of the contacts list, both show the same 164 contacts, not all the 470 contacts in my address book. I have just the contacts I wanted, but it is confusing by having the "all contacts" list on the phone. They are really just the same lists.

  • Hp smart web printing does not work on firefox. HP says this is not their problem and to contact Mozilla. Is there a plug in available?

    I just bought a new hp printer. the software has a feature called HP web smart printing. The feature works on explorer but not on Firefox. HP says this is not their problem and suggested I contact Mozilla. Is an add on available and if not will one be made available.
    I am using v. 3.6.13. and the printer is HP Officejet 4500.

    HP smart web printing is an application that only works with IE. In spite of what HP have told you, if they want their application to work with Firefox they will need to make a version for Firefox. It is not down to Mozilla to make a version of the HP software for Firefox.

  • ICloud not working on 3gs, please help!

    Hi, i've just updated my iPhone 3gs to iOS5. All seems to be working fine, apart from iCloud. The Wi-Fi sync and everything else is great.
    However, on the settings option, iCloud, Photo Stream, and Twitter are greyed out. The option is still available, but i can't access it. I don't know why, and because of this, any new purchases are not uploaded to iCloud/my computer without syncing. iCloud is installed and working fine on my PC (windows 7), but for some reason it is not working on my 3gs.
    Any suggestions on what i can do would be great, thanks.

    I've already allowed automatic downlods on both my phone and windows machine. This is what i see, and the same happens with photo stream under the photos setting.

  • Maxl statement (display user in group all;) is not working.

    Hello,
    Hyperion version 9.3.1 upgraded to 9.3.3. Not sure the below issue is because of this
    I have an interesting issue with a maxl statement : "display user in group all;". When I execute this statement through command prompt doing essmsh, it does give out any records and also doesn't end. I will have to end it with ctrl+c.
    When I execute it through EAS console, then EAS console just hangs.
    But, if I try to retrieve the users from groups individually ( I mean "display user in group 'examplegrp';"), then its working fine and throwing out the records.
    It is giving me a hard time and my dumb mind not able to figure it out.
    Any ideas please?
    Thanks

    Hi CL, Yes I ran it on the Essbase Server. We actually set it up through a scheduled batch script which was perfectly fine till last month (I guess). We noticed this just a week ago. The only change we had in our environment is that we upgraded 9.3.1 to 9.3.3 recently. Not sure whether it is making any difference.
    Thanks,
    KK

Maybe you are looking for