Smart Groups not working after Maverick update

I can not send a message with my SMART group after I updated the Maverick. Someone help!!!

I have found that I can use Outlook 2011 if I boot my macbook up in safe mode (hold shift key down when restarting). Outlook then works, but does not have all functionality - for example I cannot search my emails, though I can sort them.
This lets me get by for now, but it means of course that in safe mode there are many other things that the machine is not able to do so is only of use for checking emails.

Similar Messages

Boot Camp not working after Mavericks update

Hello, I'm new in the communitie. I have a 2011 17" MacBook Pro, I was using MacOS X 10.7 and boot camp with Windows 7. I have updated to Mavericks and after the update my boot camp no longer works. When I hold the option key "Windows" is not showing. Please I need help, at least I need to recover my data.
Please some help!

does it show as windows in disk utils in osx?
personally I have gon from lion to mtn lion to Mavericks and never have it effect the windows partition in any way as it's read only for osx and non of the osx upgrades have changed the bootloader as far as I know

Mail not working after Maverick update!

I'm having a similar problem with Mail since the Maverick update.
I can open mail but most of my mailboxes are missing and it won't let me click on any of the remaining ones.
You can bring up any of the drop down menus and use as if it's working perfectly... but the mail window itself cannot be used?
I have brought the Mail window up and then clicked on enter time machine but no back ups appear... i endlessly float through the background?!
Everything else works on my Mac?
Can anyone help or maybe seen a thread that would apply to my circumstances?
Any thoughts are greatly appreciated.

I have installed Mavericks, but my mail, Version 7 (1822), will no longer get new mail from the server.
I have to do it manually.
Any suggestions will be most appreciated.
Henry.
iMac 5.1

PhotoBooth flash not working after Mavericks update

Hey,
I have a mid-2010 13'' MBP and everything was fine up until last week when I updated to Mavericks from Lion. I try to take pictures on Photobooth (flash enabled), the screen flashes but the photo still comes out very dark and nothing happens, no matter if I'm in a dark room or not.
I've reinstalled the OS, restarted, changed permissions and all that but nothing works.
And this isn't the only application I've been having problems with - Dashboard sometimes doesn't open after sleep or it freezes a lot. I also think the computer is generally much slower. Really regretting this update.

The same happened to me, I don't know what is going on but my photo booth worked good until I updated to mavericks, pictures now are very dark with or without flash.

Smart mailboxes not working after latest update

My smart mailboxes are all showing empty, including one whose entire duty is to show unread mail.
How do I restore their functionality? I did the index build but from what I can tell that does not affect smart mailboxes.

Thanks for your suggestion, it has solved my difficulty. For informational purposes I will publish my post and the solution in hopes it will assist others.
I am running Final Cut Pro 6.0.5. My Sony SR12's drive is recognized during the Log And Transfer process. The problems continue. All of the thumbnails have a grayish/brown band going right through the middle of each one. I am able to play the clip in the Log and Transfer window but as soon as I attempt to drag the clip to the media box, FCP crashes. I had this same problem with iMovie 7 and found that updating to the latest version solved the problem. In this case however, FCP 6.0.5 is the latest version. I have the same problem with Final Cut Pro Express 4.0.1 but again, not with iMovie 7.1.4. I loaded Sony’s XDCAM software as well just in case but it did not do anything to help the situation.
When I trashed the Perian component along with QuickTime preferences it did the trick. I believe it was the old version of Perian causing the conflict with Final Cut Pro’s Log and Transfer option, not the Quick Time preferences. When I installed the newest version of Perian which is 1.1.3 there didn’t seem to be any conflict and the HD clips from my Sony SR12 imported fine with no further crashes.
MacBook Pro 17" 2.33 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Mac OS X 10.4.11
Final Cut Pro 6.0.5

Preview, Fontbook, Maps not working after Mavericks update

Updated to Mavericks and discovered that a bunch of my mac apps have decided to stop working. I click on them, see a flash and the app just dissapers. Anyone having the same issue? Any solutuons?
Running the first-gen Macbookpro Retina.

Boot up holding command-r keys into your Recovery Volume.
First run Disk Utility > Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X. This will be an install "in place" and shouldn't effect any of your own data or settings.
That said, you should always have a backup as anything can happen at any time.

Logitech Smart Hub not working after Yosemite update

I do like what I have explored of Yosemite thus far. That being said, my Mac Mini - XBMC entertainment center is less than perfect now. After the Yosemite upgrade, the Smart Hub will not operate correctly in XBMC. This is likely a specific issue in regards to the IR component of the Mac Mini. I understand that Apple has decided to nix the IR ports on their newest OS. That's ok by me, but I want to re-enable this capability for more than a few reasons. I am certainly no techie, but I am willing to enter a simple command line to remedy the situation. I do not know where to begin. It'd be very nice if this could be done via Automater if possible, or even Applescript. This breakage is much like hiring a skilled elephant to paint the house. The painting he does is second to none - but he wrecks everything else. This is what Yosemite has done here, unintentionally damaging my media environment. Can anyone with some skill minus the elephant analogy help me out here?

Same issue here with my iMac, want to use it also for XBMC and the Apple Remote.

HP DeskJet 990c duplex not working after Maverick update

Try the
Deskjet 3520 All-in-One Printer Series driver
I used this with my moms old deskjet 990c printer and now she can print duplex in Maverick.
You can go to layout and enable double sided printing.
Good luck!!!
These updates are frustrating, when you don't care about wireless printing, they should just tell you which driver still supports the old basics.

Hello darrenfromsolihull,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're unable to add a printer, please follow the steps outlined below.
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Troubleshooting printer issues in OS X - Apple Support
Take care,
Alex H.

Hover not working after Mavericks update

Just updated the OS on my Macbook Pro this morning. I'm a web designer/developer and the navigation of the site i'm working on changes background color when you hover over the link. Prior to the update the action worked. Now it doesn't (checked in Firefox, Safari and Chrome). I checked on another Mac pre-update and the hover action works there.
Any thoughts?

This is actually a bug that has been happening since the latest 2 iterations of OS X. Every now and then, it will start working again. There is nothing wrong with the mouse, just the OS.
I acutally posted a thread about it almost 1 year ago. No surprise, Apple has made no attempt to even acknowledge the issue:
https://discussions.apple.com/message/21522392#21522392
The only solution that has worked for me is a 3rd party app called SteerMouse. Try out the 30-day trial and see if it helps:
http://plentycom.jp/en/steermouse/download.php

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Hey there sarunelis,
It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
Thank you for using Apple Support Communities.
Regards,
Sterling

Phone not working after OS update, phone not working after OS update

phone not working after OS update, phone not working after OS update

I do have a questiion. I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen. It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!! I have tried holding down the home key and power button several times and the same message continues to appear.

My facetime on iphone 4 is not working after the update to IOS7

Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working after The update to IOS7 Thanks xxx

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

Videofunction on iphone 4 is not working after the update to IOS7

Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
Anyone else experiencing the same problem?
Anyone with solutions?
Thanks!

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

Smart Groups not working after Maverick update

Similar Messages

Maybe you are looking for