Smart Groups using a combined negative condition don't seem to work

I have two manually created Groups. Let's call them 'All' and 'Some'. If I create a Smart Group so:
Contains cards which match all of the following conditions
Card is member of All
Card is not a member of Some
I would expect the result to give me all those cards in All that are not in Some.
It doesn't. It yields all the cards in All. In other words the negative condition "not a member of" is being ignored.
Anyone else found this?
Is there a workaround?
Thanks

I have had similar problems. If you are certain you have the appropriate criteria checked, The match "any" or match "all" on the top level which ever is right, then the rating "is" the criteria you want and scroll down to make sure nothing else is limiting your search, all obvious I know, and then you have checked to make sure in the browser search field "Showing all" is displayed and it still doesn't work, then I simply do this. Delete the smart album or web gallery and create a new one with the criteria you want. It doesn't make sense to me, but it has worked many times when my Smart albums get stupid. I have a similar unanswered question here.
http://discussions.apple.com/message.jspa?messageID=6613369#6613369
As far as the greyed out criteria, I don't think that has happened to me.
PS is this in Aperture2?

Similar Messages

How do I get all my fonts to work. I upgraded the OS and the old fonts don't seem to work.

How do I get all my fonts to work. I upgraded the OS and the old fonts don't seem to work.

If the fonts are installed on the OS they should be there already. If they were only available to CS5 they are probably in the fonts folder in the Adobe section of the Common files (location will be OS dependent), or they may be in ID's own fonts folder.

I've just changed from a PC to a mac and have a large number of downloaded WMA music files (not i-tunes purchases) which I just can't get into my i-tunes library. File converters don't seem to work either. Any ideas?

I've just changed from a PC to a mac and have a large number of downloaded WMA music files which I can't get into i-tunes. When the library was in Windows, i-tunes would convert the files automatically, but this doesn't happen now. I've downloaded a couple of file converters, but these don't seem to work either. Any ideas?

iTunes for Windows (but not iTunes for Mac) can import and convert unprotected WMA tracks. If the tracks are protected by DRM (Digital Rights Management) then it will not accept them.
One option would be to install iTunes on your PC, do the conversion, and then transfer the converted tracks from iTunes on your PC to iTunes on your Mac.

HT1379 My iMac won't start up and shows a grey screen with light blue bars Online instructions have been followed bur don't seem to work

Hello
Online instructions for rebooting don't seem to working
What next

Light blue bars is a new one.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
Genius Bar Reservation US

I am using an iphone 4s Emoticons don't seem to appear

I have been able to type in :-) and the emoticon would show. However, for some reason it doesn't now. I can select them from the keyboard but confused why its changed. can anyone help please.

I used it in text messages and imessages and it worked ok. Now for some reason it has stopped working and can only be selected from the emoticon keyboard.
It does work in other apps such as facebook no problem.
So I used to put :-) and it changed automatically to now it doesn't it stays as :-)

The Ctrl+Up and Ctrl+Down keyboard short cuts don't seem to work anymore. Can we get this back?

Until the latest update (I'm guessing v 34.x), the search bar's icon would show you the currently selected default search engine. I understand that Google is no longer paying to be the default... That I was expecting and isn't my issue....
I used to be able to use Ctrl+Up and Ctrl+Down to change the default search engine (maybe default isn't the right term... but it changed what was used when I hit <Enter> or <Alt+Enter>). Now, there's no support for this as far as I can tell.
This shortcut page (https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly) still references it, but it doesn't seem to work.
As a sort of side note: Where typically, middle clicking on anything opens stuff up in a new tab, that behavior does not seem to carry over when clicking one of the non-default options in the search context menu. I've always appreciated that Firefox was very consistent about respecting the middle click as "do this in a new tab" what seems EVERYWHERE.

If you start typing a search term then a drop-down list opens.
You can use the Tab key to select other search engines that show on the bottom bar.
If you want to restore the previously used standalone window to manage search engines then you can toggle this pref to false with a middle-click on the about:config page.
*about:config page: browser.search.showOneOffButtons = false
You need to close and restart Firefox to make this work properly.
See also:
*https://support.mozilla.org/kb/Search+bar

Hi..I have bose companion 2 speakers and they don't seem to work with my macbook pro anymore..

The bose companion 2 speakers used to work fine in the beginning when I bought it.
After some days, I stopped using them and kept it in the box.
A few days ago, I removed them from the box and tried connecting them to my macbook pro but it does not seem to work
I also tried connecting it to iphone and tablet, it works with that
I dunnot what seems to be the problem here.
It does not even show as an option in the sound output preferences.
If anyone could help me, it would be great.
Thanks..

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

How do i access iTunes store through firefox? RIght now it wants to use Interent Explore, but i don't have that working on my computer.

I have itunes on my computer and want to have it use Firefox to access iTunes store.

KalebsDad78 wrote:
Try going to settings and then iTunes and App Store and logging out and log back in. Make sure the music app is closed while doing this and then open it back up after logging back in and see if the icon has returned.
I'm not sure what you mean, precisely - I opened settings, then I opened "itunes store", then opened "app store", but not sure how to log out, and back in on the phone? I closed them all down again, but still no radio icon, and when I'm in the store and tap the prompt "go to itunes radio" it just brings me to my albums list on the phone. Strange.
Does this make sense? I mean, am I explaining things clearly?
I appreciate the help, this is a pain in the arse.

Time Machine and Time Capsule don't seem to work well together?

Reposted.
I get the feeling there are some serious problems with the combination of Time Machine and Time Capsule.
This is extremely disappointing, as the idea of a centralized backup device on the network (instead of disks attached to each and every computer we have running Leopard) seemed like such a good idea and a good way to supplement our tape-based backup that takes place with Retrospect.
In reality, it's a disaster on both Intel and PowerPC systems. All systems and the Time Capsule are fully up to date with software updates from Apple. I have two 1TB Time Capsule units. It goes something like this:
1. I have a few systems (mainly Intel) that work perfectly with the Time Capsule. There are no complaints and no issues at all. These systems just quietly run their backups as they should. They are the definite minority--maybe one or two have worked properly.
2. I have some systems that complain from time to time (mainly PowerPC) but will back up with a little encouragement. These too are the minority.
3. And finally, I have systems that are nothing but pain. These are both Intel and PowerPC systems. They are also the majority of the systems I have. The most common problem is sudden loss of the credentials needed to access the Time Capsule hardware--a user will be going along about their business when the Mac OS asks for the Time Capsule user name and password--after it's already been supplied and backups have been running. This should simply never ever happen.
Another charming behavior I've seen is corruption of the sparse disk image file that each computer creates on the Time Capsule. Time Machine will complain that it can't perform the backup, and examining the disk image file with Disk Utility shows it to be severely damaged. Turning off Time Machine, deleting the corrupted sparse image file, and starting over fixes it. For a while.
Finally, there are the machines (again, both Intel and PowerPC) that just can't seem to actually get through the first backup run. They either go so far and can't continue, or never actually manage to get started. I've checked the disks in these computers and found no problem with the hardware or file system. The installations are fresh and fully up to date.
Meanwhile, I have computers running Leopard with directly attached disks configured for use with Time Machine. One is a QuickSilver that isn't even officially supported by Leopard, with a Firewire attached disk. It doesn't skip a beat. The other is an Intel Mac mini being used with Mac OS X Server 10.5.4 and a USB external hard drive. These machines just do their thing, and I never have to babysit them.
These problems with the Time Capsule have been so severe that I've just given up on most of the computers and shut off Time Machine entirely. We have tape backups that run over the week, so it's not a huge loss. But that's not what really made me throw up my hands and say "enough"...no, that was the speed. Even with just one computer backing up to it, the Time Capsule seemed terribly slow. Watching the progress indicator was just painful.
I put in a word about all of this to my independent Apple dealer, and they say I'm definitely not the first to complain about some or all of these problems. In fact, they told me they were going to set up a test lab in their shop to see if they could duplicate these findings. I have no doubt that they can.
There are a total of seven computers backing up to one Time Capsule. They all store maybe ~40GB worth of data including the OS. There are about six computers on the other. Because of the way the network is laid out, the Time Capsule is connected to a Gigabit switch (and that is the only thing it's connected to). It cannot be used as the router, although I know Apple suggests this. The Airport section is disabled--I have no need or desire to use it. Some computers link up at 100 megabits, others at 1 gigabit. There are no network problems--we have no problems moving large amounts of data across the same network to our tape backup machine.
Is anyone else seeing these kinds of problems? Am I doing something wrong or expecting too much from Time Capsule?

I may be on to something. The Time Capsules I have live in a telephone equipment room that is indoors but not directly air conditioned or heated. It doesn't ever get too hot to be comfortable in there--the highest I've ever seen the temperature was 80 degrees (F). Most of the time the temperature is between 60-78 degrees.
I happened to touch one of them the other day while it was in use, and I noticed that the casing was hot to the touch...not dangerously so I suppose, but much hotter than I would have expected.
So I turned a small fan on both Time Capsules and have left it running. And I've noticed that not only do backups seem to complete more quickly, the reliability is also better. I am going to try some of my most troublesome computers once again just to see what happens.
I know there is a fan pointed at the hard drive in the Time Capsule, but I can't see how it does much in the way of cooling things down. In my opinion, it's just surrounded by too many heat producing devices to do much good...after all, not only is there a 7200 RPM hard disk in there, but also a 500MHz Marvell processor and radio set.

Color profiles don't seem to work since 2.1 update

I have a Powerbook G4 1.67 (last of the motorola chips) running 10.4.11.
I have used aperture for a year and love it... When I upgraded to aperture 2.1 and security update at the end of March my print profiles for my Canon IP5200 seemed to stop working and my once wonderful prints where no longer true to my on screen image. I have not been able to verify if it is aperture's problem or something I am doing wrong. I have not seen any recent printing/color managements issues in this discussion group and wonder if anyone else is having the same problem.
I wonder if upgrading to Mac OS 10.5 would fix the problem. Thanks for any help.

Okay Rich, I hope I can help.
The main difference with the Pro9000 and the other Canon printers I use (iP8500, 6700d) is that to get the best prints I turn off "Black Point Compensation" when printing from Aperture. With it on, the colors are slightly washed out, but with it off they're spot on.
So, say I'm printing a 4 x 6 on Canon's Photo Paper Plus Glossy paper, my settings would be as follows:
_Aperture Print Dialogue Box_
Printer: Canon Pro9000 (I have the latest driver installed which was posted 4/10/2008 & the 10.1 CUPS driver)
Paper Size: 4 x 6 Borderless
Orientation: I don't use "Best Fit", I specify landscape or portrait
ColorSync Profile: with this paper I use "Canon Pro9000 SP1"
Black Point Compensation: Off (again, this is turned on in Photoshop & when I print to my other Canon printers. The Pro9000 handles the blacks without issue, so turn it off.)
Gamma: 1.00 (same on iP8500, 1.05 with 6700d)
_Print Settings_
Quality & Media: Photo Paper Plus Glossy, Detailed Setting, Slider all the way to the right (Fine)
Color Options: Brightness is the only option available, I leave it as "Normal"
Borderless Printing: Amount of Extension all the way to the left at "Min"
With those settings, and a good calibration on my main display, I'm getting great, accurate prints. I just went through the process today of profiling my system using an Eye-One Display 2, and things are looking even better than before. If you head over to http://www.gballard.net/nca.html you can get a great test image near the bottom of the page to calibrate with (a good site on color mangement, although I get better results with the ColorSync workflow in Photoshop).
I hope that helps with your Pro9000 issues Rich, best of luck!

"Film Safe" and "Mark repeated frames" don't seem to work?

Hi guys!
I'm new to this forum and new to FCP Pro - though I'm not at all new to non-linear editing (Media100, Avid, etc.).
A friend of mine is editing a feature film on a brand new G5 (dual) using a newly installed Final Cut Studio. Everything is working just fine except the marking of repeated frames in the sequence. I did my best to find the answers in the pile of books that came with the s/w, then tried to consult with editors around here - to no effect, alas! FCP is not very popular in Bulgaria (it's really a shame!) and the other two film projects that make use of it also have similar problems.
Can any of you, guys, help?
The problem in more detail:
FCP Pro 5 does not mark "on the fly" the repeated frames in a sequence. To be more precise, sometimes it does and sometimes it doesn't - and in a single sequence. If that wasn't enough, I'm not able to make FCP mark those dreaded "couple of frames" needed for negative cutting (inless the corresponding dupes are produced, that is!).
I have really tried to solve the problem on my own using the books and consulting people and have done a lot of testing and trying, so please bear in mind:
- "Mark repeated frames" is checked in "Preferences"
- I am using one and the same project and sequence for these tests
- the computer is G5, dual processor, 1 month old
- the software is Final Cut Studio, latest version
- I'm a bit pressed for time, as the editing must be completed by the end of Jan.'06
I will greatly appreciate your help!
G5 Mac OS X (10.4.4)

GUYS, I NEED HELP !
ANYONE?

Updates don't seem to work...

I've been using FF8 beta for almost a month. For the last few weeks there's been an "update available" type popup in the notification area (I'm using Vista) but then the update doesn't load or something.
1) The "connecting to update server" bar keeps moving, but apparently no connection is made. After a while I close it or minimize it then check later, but no update is ever done.
2) When I check Help>About it shows just v8.0. So I can't tell if I have a newer build than what I first installed.
Thanks for any info.

My current Bridge CC version is 6.0.1.6
Current Extension Manager CC version is 7.1.1.32
Current Photoshop CC version is 14.1.2 x 64
Current Camera Raw CC version is 8.3.0.141
I updated all the above again today. The version numbers were identical, ie unchanged, before and after the "update."
I see that others seem to be experiencing the same problem.

Using Dynamic Tabs in 11gR2 doesn't seem to work.

Hi there,
I'm trying to use the Dynamic Tabs Template in an ADF 11.1.2.3 application using JHeadstart 11.1.2.1.28.
According to the developerguide section 9.3.1. (Enabling Dynamic Tabs) it should be rather easy to do this.
Set PageTemplate to : /common/pageTemplates/JhsDynamicTabsPageTemplate
Set datacontrolscope to : Isolated
Set Default group Usage to : Region with Page Fragments.
Set Default group Region Access to : Common UI Shell Page.
I use facelets as viewtechnology.
Generating the application works fine.
Running the application results in an error at startup :
Error 500--Internal Server Error
java.io.FileNotFoundException: /common/regions/DynamicTabs.jsff Not Found in ExternalContext as a Resource
The pagetemplate can't find the reference. The file is nowhere near /common/regions/DynamicTabs.jsff. I actually cannot find it at all.
I can reproduce this behavior on two different workstations.
All of the above works smoothly in 11gR1.
I think it's a bug, at least it looks like it.
What do you think ?
Regards Luc

Hi Steven,
it is time for "Ripley's believe it or not" I guess....
I am definitely able to reproduce the behavior.
1) Create new ADF fusion webapp
2) Create new ADF BC.
2a) Connection = HR.
2b) create EO, VO for Employees and Departments and also create default AM.
No adjustments, everything default.
3) Refresh Datacontrol palette to have new DC available
4) Enable JHeadstart on ViewController project
5) Create new Service Definition. Accept all the defaults.
6) Go to application Definition and make the following adjustments
6a) Set PageTemplate to : /common/pageTemplates/JhsDynamicTabsPageTemplate
6b) Set datacontrolscope to : Isolated
7) Apply, Save all and generate.
During generation the /common/regions/DynamicTabs.jsff is not added to the project.
Running the new application results in
Error 500--Internal Server Error
java.io.FileNotFoundException: /common/regions/DynamicTabs.jsff Not Found in ExternalContext as a Resource
Versions :
ADF 11.1.2.3
JHeadstart 11.1.2.1.28
Windows 7 64bit
And I also have the OraFormsFaces extension installed. Could that be causing the problem ??
I do not use it in this project, but the fact that it is there and that it is available as in the New gallery ....--> JHeadstart --> JHeadstart OFF Generator indicates that OFF does influence JHS in some way ?
Regards
Luc
Edited by: lucbors on Jan 18, 2013 7:17 PM

How do I delete a "consecutive group" of emails? Shift click doesn't seem to work.

upgrades computer to win 7 and from outlook express to thunderbird. 500 emails in inbox. outlook express allowed me to select the first email and then shift click the last email in a group of emails to be deleted all at the same time. thunderbird doesn't seem to allow me to do this. or am I doing something wrong. I don't want to sit for hours deleting 500 emails one at a time.
thank you

You're doing something wrong. Thunderbird works the same way.

M4P files don't seem to work in Imovie HD

I am having trouble using M4P songs I purchased on Itunes in Imovie. They cause the Ken Burns effect to be shaky. I do not have the same problem when I use music I imported from CD's. Has anyone else had this issue?

I guess I was sleepy... it's [11.0.10] not 10.0.10
At any rate, the key path I used mentioned @ http://www.adobe.com/devnet-docs/acrobatetk/tools/QuickKeys/EnhancedSecurityQuickKeyAll.pd f (for reader 11.x) is
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown]; I noticed they also show up in the equivalent key under Wow6432Node.
I even restarted these PC's after ensuring the registry values were all there - but it was the same situation after reboot.
I don't know how it would matter, but some additional details that may help:
All the values all being applied from the SYSTEM user, as I'm deploying these as a Compliance Baseline from Configuration Manager.
it might be possible that all affected installations were installed with an .mst

Smart Groups using a combined negative condition don't seem to work

Similar Messages

Maybe you are looking for