Smart guitar chord bug with key change??

I think there is a bug in the smart guitar chord selection when changing the song key.
Could someone try this...
Song key set to C major.
Select smart guitar and strum the strings of the Em chord. Now hit the Em chord button to auto strum... sounds the same. So far so good.
Now change song key to C minor.
Do the same for the now Eb chord.. when strumming the strings it still sounds an Em. But notice hitting the chord button plays Eb.
Does anyone else hear this? (it's not only that chord that is wrong)

Thanks guys, I reported it to apple.
It's even more unpredictable though. It seems to me that on a key change the auto strum buttons play the correct chord (not being a musican I am not sure if this is even true, and now I certainly don't trust what it says).
It seems to me that it's the strings that don't get updated properly. Some do, some don't, some do after playing a different chord or playing the chord with the chord button.
Example, between the key of C major and C minor as. before you have a G and a Gm chord.
Play the chord and strum it in C major and it should sound the same.
Change to C minor and without playing any other note or chord, strum Gm... it's still playing G, wrong.
Now strum any other chord and then strum Gm again.,.Now it has suddenly corrected and does play Gm.
As a quick test I changed key to D (major or minor I can't remember) and practically every single strummed chord is wrong.
All I can say is Apples test procedures are woefully inadequate. This is an embarrassment.

Similar Messages

  • How do you add 7 chords to smart guitar chord patterns

    Trying to create a song with G7 chords.  How do you add the V7 chord in the chord patterns on the smart guitar in GB iPad?

    When you are in the smart guitar screen, tap on the wrench icon (top right). Choose "Edit Chords". Tap the chord on the guitar you want to edit and swipe the chord "wheels" to choose the tonality, etc.

  • Imovie '09 v8.0.5 bugs with speed change and titles

    OK so here is what I'm experiencing.
    I take a clip and change the speed. Then I add transition from the previous clip to this one and all of a sudden I cannot play the video again. I can't delete the slowed down clip even. I can play video that is in the events library, but not that in my project. When I do mouse over the beginning of my video and play I can hear the sound but it is like it is far off in the distance and the video is just solid gray. I have run into many other similar bugs when changing the speed of a clip but could always delete the clip, quit, relaunch, and try again. With this problem I added a transition and can't even delete the clip. Apple please address this issue. Thanks!

    I am having the exact same issue. Change the speed of a clip in the project, then the ongoing video screen no longer displays the project correctly (but does display when playing clips from the library). This happened recently as I've made several older projects on iMovie 09 using multiple speeds. Perhaps a bug with the 8.0.5 update.

  • Cange chord strips for smart guitar

    Hi, I am looking to change the selection of chords in the smart guitar, but idot know how. I would like to add an A Minor. Can anyone help me configure the chord strips?
    Thanks,
    Michael

    Thanks guys, I reported it to apple.
    It's even more unpredictable though. It seems to me that on a key change the auto strum buttons play the correct chord (not being a musican I am not sure if this is even true, and now I certainly don't trust what it says).
    It seems to me that it's the strings that don't get updated properly. Some do, some don't, some do after playing a different chord or playing the chord with the chord button.
    Example, between the key of C major and C minor as. before you have a G and a Gm chord.
    Play the chord and strum it in C major and it should sound the same.
    Change to C minor and without playing any other note or chord, strum Gm... it's still playing G, wrong.
    Now strum any other chord and then strum Gm again.,.Now it has suddenly corrected and does play Gm.
    As a quick test I changed key to D (major or minor I can't remember) and practically every single strummed chord is wrong.
    All I can say is Apples test procedures are woefully inadequate. This is an embarrassment.

  • Hardware key changed and license with error

    I need your help, it was switched card
    my network server and the time to start again
    machine does not take leave SAP. to review
    Because of this, is because the hardware key change, cree
    a new license key with the new hardware, but
    When I load it indicates that you can not validate.
    Someone can help me with this.
    thanks
    Manuel

    Dear Manuel Sandoval,
    Try loading the license from the operation system level using SAPLICENSE command also as said above delete the existing old license and install the new license.
    Regards,
    Sharath

  • Intersect bug with Smart Guides

    The December updated didn't fix the intersect bug with Smart Guides. Previously it would snap to the intersection of paths and show you the intersect point. With CC it does nothing. Just passes straight over. Would you please fix this. Having to use AI CS5 just so I can work on the maps I need to produce. Thanks.
    Anyone know how a work around/fix to this until we get it fixed by the AI guys?

    Never mind... a little more digging and found the solution in this thread:
    Add anchor point tool not snapping to intersection point

  • How do you change presets in plug-in guitar rig 5 with FCB 1010 within MainStage 3?

    How do you change presets in plug-in guitar rig 5 with FCB 1010 within MainStage 3?

    Hi
    Mainstage will not pass through Program Change messages to plugins. I have not succeded with (quick) attempts to get GR to respond to MIDI CC either.
    You might do better to simply make additional Patches (or combinations of Audio and Instrument Patches) rather than try to control GR5 directly.
    CCT

  • Need all the drivers and cannot change the brightness with keys

    my product name is hp 15-r250tu notebook i brought it a few days back all and the os i am useing is windows 7 ultimate all the drivers need to be installed but are not available on hp.com dont know why ? and i am not able to change the brightness with keys and cannot play games or videos video card off

    Hello,
    please have a look there: Adobe ID, sign in, and account help. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
    Good luck!
    Hans-Günter

  • Changing profile with # key

    I thought that pressing the # key changed from normal to silent profile - but that doesn't work on my new N95 8GB - any ideas how I can make this shortcut work?
    Thanks in advance,
    David

    It doesn't work on the N95-1 either.
    Press briefly the power button and scroll down 2 notches, then select. OK, it's not as quick as pressing a couple of seconds on the # key but it's certainly faster than navigating through the menu hierarchy.
    Message Edited by grschinon on 13-Apr-2008 06:21 PM
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • SyncBo Example - cannot find message associated with key

    Hi,
    I followed the tuturial to create a SmartSync Project.
    And when I run the project I've got a Servlet Exception:
    javax.servlet.ServletException: cannot find message appropriated with key: dispatcher.forwardException.
    What I need to change?
    Thanks a lot,
    Rachid

    Hi,
    this error comes up when the destination serlvet throws an exception other than ServletException!
    Its a standard tomcat bug!
    Rgds Thomas
    -->
    http://issues.apache.org/bugzilla/show_bug.cgi?id=19114
    -->From apache.org:
    When a forwarded servlet throws an exception other than ServletException or
    IOException, the thrown exception is lost. This is due to the line:
    throw new ServletException(sm.getString("dispatcher.forwardException", t));
    (found in org/apache/tomcat/facade/RequestDispatcherImpl.java:210)
    the earlier catched t is here not passed into the constructor of
    ServletException but into getString.
    To reproduce construct a servlet that throws an Exception (other than
    ServletException and IOException) and another servlet that forwards to it. You
    will get just a forwardException (if you have the proper locale strings
    installed!) but the originally thrown exception will get lost forever.

  • Terrible bug with Rescue & Recovery 4.5

    Hello all,
    Just a notice to all users, I had a terrible bug with Lenovo Rescue & Recovery. Everything went well, until the restore: I have one SSD for system and one micro sata for data. The system drive had two partitions (created by Lenovo at the origin, a system (C) partition and a Lenovo recovery partition). When I tried to restore a previous version of the system drive that I backuped with Lenovo R&R, it restored the system on C: and restored the recovery partition... on D:, erasing all my data! In addition, the MBR was missing on the system. And cherry on the cake, I could not use the backup a second time when I tried, because R&R did not find the backup again.
    I was particularly disappointed because as the backup went so smoothly, I did not do a data backup before restore, my previous backup being three days old, so I lost three days of work.
    I had previous bad experience with Windows backup & restore, windows software could not find the restore, but at least it did not erase data.
    Thierry

    I agree with the TERRIBLE bug comment.
    It amounts to:
    (1) restore Q partition
    (2) C drive.
    I will repeat my other posts. I ordered pc, with 320 GB and 160 Gb Hdd.  From factory, C went to 320MB.  Factory install goes to 1st HDD it finds, in my case 320 GB.
    So you have discovered a new, how does it work?
    1 HDD (c), 1 sata (for data).  It used factory recovery items, and waxed the sata( and made it bootable). Then got smarter, and restored C to HDD, unbootable.
    Did someone not test this? Dont expect a new version of RNR. not supported on win 8. Acronis, $$ well spent. 
    Dumb.
    Next time, unplug the loved sata before a FULL HDD restore. (not a c drive restore). Sad.   unplug loved! 
    ==
    Did not find backup 2nd time around. Discussed in other posts from myself.  What is your windows platform RNR backup location set to?  If local, change it to USB or where ever you think they are at.

  • When trying to edit a photo, it disappears (black screen) or screen is full of lines. Is this a bug with the latest software update?

    After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help: As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • What are the notes of the Smart Guitar?

    When I open iOS GarageBand's Smart Guitar on Key C-Major, what are the notes I'm seeing? For instance, what are the notes when I tap the C chord string from 1 (bottom) to 6 (up)?
    My actual goal is to record all string tap sounds, cut them into respective pieces in Audacity, then save them as e.g. "C.wav", for further use in another context. I like how GarageBand lays out the chords so my small (noncommercial) program aims to copy this, albeit I'm not a professional musician (as you can see from my question, I'm sure!).
    Thanks!

    1. Keeping track of the individual conversations taking place between applications on the source and destinations on the source and destination hosts. 2. Segmenting data and adding a header to identify and manage each segment. 3. Using the header information to reassemble the segments into applications data. 4. Passing the assembled data to the correct applications.

  • Playback of a Smart guitar recording track skips some notes.

    I recorded a track using the Smart guitar in Garageband on my iPad2 and recorded a track of 130 bars. The recording was smooth and I could hear all chords and strings play well. However, when i play my recording, it skips several notes in between and I only hear broken audio. When I slide the track bar behind on the piece of track which skipped the notes, and play again, the recorded notes sound correct. Am I doing something wrong or is this an issue?

    I have GarageBand on my iPad 2 and there are no latency problems with Smart Guitar during recording. I've encountered the problem only on the iPhone 4s. If I'm not mistaken, the iPad 2 and iPhone 4s have identical RAM amounts and identical processors, so I'm not sure what the problem is. Perhaps the software is not adequately optimized for the iPhone. I hope the GarageBand engineers are monitoring these forums....

  • Garageband electric guitar chord display

    so i plug my guitar into the the computer and i open up garageband and i can play straight through the computer no problems, i go to the how to play and the tuner and i tune my guitar. then i go to a new electric guitar project, i turn it on with clean combo and i practice my chords (im only a beginner)
    and i practice chords like f which i find to be one of the most difficult chords to play due to the positiong of your fingers, but when i play i can never get the chord display thing at the bottom to come yup with an f chord, it comes up with e, b major, a. this is the same with c minor and some of the major and minor and seventh chords. also sometimes when i play a basic b major chord it says im playing an e chord when i have my finger position perfect. is the note display accurate ornot, cause it could be really messing up my learning if it isnt.
    also ive had some problems sometimes when i've had garageband open for a while, i dont know if i tripped something by pressing a hot key, but every guitar gets massive delay on it (even when i havent got any delay pedal or effect on the guitar), i close it down and its normal again, has this happened to anybody

    Chords work only with software instruments - GB isn't able to single out the notes in a real guitar chord. So what you're getting is just the reading of the tuner that tries to identify a single clean tone and is confused if you play several at a time.

Maybe you are looking for