Smart Guitar help...

Wondering if it's possible to get different guitar pedals/FX for Smart Guitar in GB app for iPad
The only reason I ask is because I saw a couple youtube videos where people were playing familiar tunes and riffs on SG (AC/DC, GnR...) and they sounded almost spot-on to the actual guitar sounds that are naturally in the riffs. 
Naturally, they may have had the iPad output going through an external unit for the modulation, but nonetheless it would seem possible to add "in-app" purchases for such pedals and I'm wondering if this exists.

This is the limitation in GarageBand for iPad. You can use (import) different effects, regardelss if there are stompboxes, amps or synth. You only can work with the parameters of the provded effects and sounds.
If you think about how difficult it is just to get audio files and Apple Loops into the iPad, imagine dealing with external plugins. May in the future with  iOS12.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Similar Messages

  • Cange chord strips for smart guitar

    Hi, I am looking to change the selection of chords in the smart guitar, but idot know how. I would like to add an A Minor. Can anyone help me configure the chord strips?
    Thanks,
    Michael

    Thanks guys, I reported it to apple.
    It's even more unpredictable though. It seems to me that on a key change the auto strum buttons play the correct chord (not being a musican I am not sure if this is even true, and now I certainly don't trust what it says).
    It seems to me that it's the strings that don't get updated properly. Some do, some don't, some do after playing a different chord or playing the chord with the chord button.
    Example, between the key of C major and C minor as. before you have a G and a Gm chord.
    Play the chord and strum it in C major and it should sound the same.
    Change to C minor and without playing any other note or chord, strum Gm... it's still playing G, wrong.
    Now strum any other chord and then strum Gm again.,.Now it has suddenly corrected and does play Gm.
    As a quick test I changed key to D (major or minor I can't remember) and practically every single strummed chord is wrong.
    All I can say is Apples test procedures are woefully inadequate. This is an embarrassment.

  • Issue with Smart View Help Contents using v11.1.2.0.01

    Hi there,
    I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
    Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
    I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
    1. Has anyone ever encountered this issue?
    2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
    Thanks in advance,
    JBM

    Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
    "For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
    This question is now answered.
    JBM

  • How do you add 7 chords to smart guitar chord patterns

    Trying to create a song with G7 chords.  How do you add the V7 chord in the chord patterns on the smart guitar in GB iPad?

    When you are in the smart guitar screen, tap on the wrench icon (top right). Choose "Edit Chords". Tap the chord on the guitar you want to edit and swipe the chord "wheels" to choose the tonality, etc.

  • Smart value help autocomplete doesn't work

    Hello,
    We are using CRM 7.0. We want to provide an autocomplete option for some customer input field.
    We decided to implement it with smart value help (F4) functionality. This customer field belongs to the customer Z view.
    When we use this Z view in the Z component, autocomplete wotks fine but when we use it in the standard component, F4 popup help works but autocomplete (smart value help) doesn't work.
    We would appreciate any help on this issue.
    Thanks in advance,
    Sergey

    Your .zshrc is only read when you start a new shell: https://wiki.archlinux.org/index.php/Zs … tion_files

  • Smart Album Help

    Smart Album help, please! While converting old slides to digital, I am importing to iPhoto in small batches. I have created a "smart album" for the converted slides expecting successive imports would automatically install into that "converted slides" titled smart album. It's not happening. ? ? ? I titled the 2nd imported batch "converted slides". This 2nd import is sitting in "Last Roll" rather than automatically moving to the smart album. How do I move this 2nd batch of 242 photos from "Last Roll" into its designated album? I tried "drag n drop" the whole roll, perusing iPhoto help menu, to no avail. HELP!
    Neophyte NaNa

    On further review of the iPhoto Help menu, it seems that an "Album" is much more flexible than the smart album. Can I change a smart album into a regular album? Or, I've created a "folder" for the smart album. Now, if I "Trash" the smart album, will the folder of slides remain? My right shoulder aches from too many hours on this project, that now I'm afraid to try anything for fear of loosing all that work. SHEEESH.
    NN

  • What are the notes of the Smart Guitar?

    When I open iOS GarageBand's Smart Guitar on Key C-Major, what are the notes I'm seeing? For instance, what are the notes when I tap the C chord string from 1 (bottom) to 6 (up)?
    My actual goal is to record all string tap sounds, cut them into respective pieces in Audacity, then save them as e.g. "C.wav", for further use in another context. I like how GarageBand lays out the chords so my small (noncommercial) program aims to copy this, albeit I'm not a professional musician (as you can see from my question, I'm sure!).
    Thanks!

    1. Keeping track of the individual conversations taking place between applications on the source and destinations on the source and destination hosts. 2. Segmenting data and adding a header to identify and manage each segment. 3. Using the header information to reassemble the segments into applications data. 4. Passing the assembled data to the correct applications.

  • Playback of a Smart guitar recording track skips some notes.

    I recorded a track using the Smart guitar in Garageband on my iPad2 and recorded a track of 130 bars. The recording was smooth and I could hear all chords and strings play well. However, when i play my recording, it skips several notes in between and I only hear broken audio. When I slide the track bar behind on the piece of track which skipped the notes, and play again, the recorded notes sound correct. Am I doing something wrong or is this an issue?

    I have GarageBand on my iPad 2 and there are no latency problems with Smart Guitar during recording. I've encountered the problem only on the iPhone 4s. If I'm not mistaken, the iPad 2 and iPhone 4s have identical RAM amounts and identical processors, so I'm not sure what the problem is. Perhaps the software is not adequately optimized for the iPhone. I hope the GarageBand engineers are monitoring these forums....

  • Smart guitar chord bug with key change??

    I think there is a bug in the smart guitar chord selection when changing the song key.
    Could someone try this...
    Song key set to C major.
    Select smart guitar and strum the strings of the Em chord. Now hit the Em chord button to auto strum... sounds the same. So far so good.
    Now change song key to C minor.
    Do the same for the now Eb chord.. when strumming the strings it still sounds an Em. But notice hitting the chord button plays Eb.
    Does anyone else hear this? (it's not only that chord that is wrong)

    Thanks guys, I reported it to apple.
    It's even more unpredictable though. It seems to me that on a key change the auto strum buttons play the correct chord (not being a musican I am not sure if this is even true, and now I certainly don't trust what it says).
    It seems to me that it's the strings that don't get updated properly. Some do, some don't, some do after playing a different chord or playing the chord with the chord button.
    Example, between the key of C major and C minor as. before you have a G and a Gm chord.
    Play the chord and strum it in C major and it should sound the same.
    Change to C minor and without playing any other note or chord, strum Gm... it's still playing G, wrong.
    Now strum any other chord and then strum Gm again.,.Now it has suddenly corrected and does play Gm.
    As a quick test I changed key to D (major or minor I can't remember) and practically every single strummed chord is wrong.
    All I can say is Apples test procedures are woefully inadequate. This is an embarrassment.

  • Smart Guitar as a controller

    Guys, I wanna use my smart guitar on my iPad as a controller to my Logic Pro over wi fi/ bluetooth. Is that possible? Thanks.

    Yes, I do. The Godin will play Logics synths well, but it is not much use as a MIDI controller. Not entirely the fault of the guitar or the GI-20, but the way Logic works.
    You will almost definitely find a small MIDI controller such as the Evolution UE-33 useful. Lots of faders, knobs & buttons.
    If you want to use the Godin as a guitar, you will need an audio interface as well. Any decent Firewire will do. I use an Edirol, but many people here prefer the Apogee Duet.

  • Why only 9 frets available on GarageBand smart guitar?

    Why only 9 frets available on GarageBand smart guitar?

    Because that's all they put in.
    Seriously, we're all just users here like yourself - no-one here knows the reasons why Apple chooses to do anything.

  • Smart-tabbing help

    i am trying to implement a smart tabbing feature: when the user hits enter the smartTab function is called. textPane is a JTextPane.
           private void smartTab() {
                System.out.println("smartTab()");
                        //finds the last line
                          int carPos = textPane.getCaretPosition();
                          String str = textPane.getText().substring(0,carPos);
                          StringTokenizer st = new StringTokenizer(str,"\n");
                          String line = null;
                          for(int i=0; i<st.countTokens(); i++) {
                               if(!st.hasMoreElements()) break;
                               if(i==st.countTokens()-1) {
                                    line = st.nextToken();
                                    break;
                               } else {
                                    st.nextToken();
                          int tabs = 0;
                          if(line==null) return;
                          for(int i=0; i<line.length(); i++) {
                               if(line.charAt(i)!='\t') break;
                               else tabs=i+1;
                          System.out.println("tabs calculated: "+tabs);
                          if(tabs==0) return;
                          String t = "";
                          for(int i=1; i<tabs; i++)
                               t = t+"\t";
                               try {
                                    textPane.getDocument().insertString(carPos,t,null);
                               } catch(Exception e) {  }
                          System.out.println("tabs set");
                return;
           }sometimes it works, sometimes it doesn't.
    Any help is greatly appreciated.
    TravenE

    I overrode the insertString(..) method of a Document to insert a matching brace "}" when a starting brace "{" is entered. Check out the code here if your interested:
    www.discoverteenergy.com/files/SyntaxDocument.java
    The concept for the "\n" character would be the same. Don't worry about the size of the class, most of the code is for syntax highlighting, the code you are interested in is only 10-15 lines.

  • GUIDE TO SMART FORM- HELP NED

    HELLO FRIENDS - I M TRYING TO MAKE SMARTFORM FOR FIRST TIME BUT I AM NOT ABLE TO DEVELOP THEM , PLS HELP ME OUT WITH SOME SIMPLE PROCEDURE

    Hi,
    1. Go to transaction Smartforms
    2. Enter a name against form zzz_form.Click create.
    3. Create a text element by right clicking the main window.In the right hand side window,write
    'Heelo Smartform'.
    4.Click activate button(ctrl +f3).Then execute it by pressing f8.Then you will get a function module.Then press f8.Then again f8 will give you the output.
    This is the small example.You will do good programming if you started observing sf_example_01 and sf_example_02 standard smartforms.
    These links will help you.
    http://www.sap-basis-abap.com/sapsf001.htm
    http://www.sap-press.com/downloads/h955_preview.pdf
    http://www.ossincorp.com/Black_Box/Black_Box_2.htm
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    http://www.sap-img.com/smartforms/smartform-tutorial.htm
    http://www.sapgenie.com/abap/smartforms.htm
    Kindly reward points by clicking the star on the left of reply,if it helps.

  • Smart Album help - pictures without Keywords

    How can I create a Smart Album for pictures that don't have a Keyword attached to them? I'm trying to put Keywords to all my pictures and would like to be able to use a Smart Album to help me get through this project.
    Thanks.
    Chip

    Thanks. I had it on "contains" and there isn't a pulldown menu for that. Never even thought to change it to the other choices to see what that offered.

  • Smart playlists - help!

    Hi Everyone I have a few smart playlist questions. This is a bit long so bear with me.
    1. Lets say there is an artist Joe Smith. Joe used to record as Joey Smith. Joe also recorded a Christmas album. How do I create a playlist that includes Joe, Joey, no Christmas songs and with that cridera use the option play songs not played in 1 day?
    2. My next question which is somewhat similar - can I do the above with two or more artist on one smart playlist?
    3. With the above two questions, tHe only option I could think of was to create various smart playlists and a third one merging both together. Now if I do that will that cause problems? For example if I say on each playlist play songs that haven't been played in 1 day, then I do the same thing on the third playlist will that cause "wires to cross" and I'll end up with nothing in the playlist?
    4. Last but not least... is there a way to just add one particular song to a smart playlist? I could not figure out how to do it. I could only find albums.
    It seems like when I say match all criteria with these questions I can solve one issue another one arrises. Any help would be appreciated. I am new to using smart playlists, ipods in general (just bought mine a few months ago) and am somewhat lost in the process. Thanks for your help, Christina

    1. You have to use multiple playlists like you mentione in your #3. This is becuase smart playlists can "match all" or "match any", but can't use "match x OR y".
    Genre is not Holiday
    Last played is not in the last 1 days
    2. Yes
    3. Not a problem, I've done it....but sometimes I make mistakes and have to tweak the various playlists.
    4. Name is what iTunes uses for track name.

Maybe you are looking for