Smart Learning Interaction Buttons
On some of the Smart Learning Interactions, you can add buttons to the interface. Two questions:
It seems there's a limit of 5 on these, is that correct?
Is there a way to remove the existing or added buttons?
Thanks!
Hello,
Maximum is 5 indeed.
When you select a button a minus sign appears that allows you to delete the 'button'
Lilybiri
Similar Messages
-
Adobe Captivate Help | Smart learning interactions
This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/smart-learning-interactions.html
Is the Scrolling List interaction just a fancy way of displaying content versus a traditional text caption? Thank you.
-
I know that Adobe has a service where you can watch past webinars, where can I go to find out about past webinars on smart learning interactions also I would like to know which smart interactions work with HTML 5 and which do not I'm using Captivate 7
Not sure there were a lot of webinars on interactions. I talked about them at DevLearn in October in a presentation, have also an overview in a table somewhere (not yet public).
All interactions are normally HTML5 compatible (contrary to widgets), but I think there is still a problem with the Jeopardy game? Hope someone from staff will confirm. It has been a while I didn't test that one on HTML5.
Lilybiri -
Customizing smart learning interactions
I have tried over and over to customize a smart learning interaction (text size, color, etc.) but when I publish it reverts back to the default settings. How do I get it to save and publish my customizations?
I have that version. I can also check that for you. Which interaction are you referring to? What kind of changes did you make?
Hope you are aware that you can make apply only one type of formatting for the entire interaction. For example, you can have "This is the text in the interaction." and not "This is the text in the interaction."
Sreekanth -
Problem with Button in Learning Interaction
I have created a Flash file with 4 "Fill in the Blank" questions (from the Learning Interactions continued within Flash CS3) at the end. I'm then using the swf file in two different ways. One way simply loads the swf file onto a 'stand-alone' page on my website and it works perfectly.
The other way I want to use it is integrated into a more complicated website where I have a Flash File into which various swf files are loaded when needed. In this version the "Control Button" doesn't change to "Check Answer" and "Reset" as it should and the whole question doesn't work.
The working version is at http://web.me.com/ginneswatsonkelso/New_Chemical_Resources/Name_Isomers_Alkanes.html
Select "4 For You to Try" to go directly to Quiz Questions.
The non-working version is at http://web.me.com/ginneswatsonkelso/New_Reaction_Pathways/New_Reaction_Pathways.html
Go to "Extras" in Menu and select Naming Alkane Isomers, then "4 For You to Try" again.
I'm using ActionScript2 and set for Player 9.Yes, my original technique was to upload the Parent SWF to a folder and then the HTML widget on my webpage would load the file from that location. As you say, all the daughter swf's had to be uploaded into the folder created for that webpage when iWeb uploads my website to MobileMe. This has worked fine for all my other daughter swf's but (I'm presuming) there is something about the Learning Interaction that doesn't let it work this way.
The other disadvantage of doing it that way is that anytime I tweak the original webpage and iWeb uploads the changes, it recreates the page folder minus all my daughter swf's and I have to upload them manually again.
What I've now done is uploaded all the daughter swf's to the same folder as the Parent and added a full web address to this folder in all my loadMovie commands in the Parent swf. Done this way, the swf with the Learning Interaction works as intended.
Many thanks for taking the time and interest to help. -
Learning interactions help - no buttons
Hi
I have a button that goes to Scene 9. I have told this on
release button to:
gotoAndStop("Scene 9",1);
On the first frame of scene 9 I have put in a learning
interaction. When I run it there are white blank spaces where the
check answers should be and the reset button.
If I have a new .fla and only 1 scene and 1 frame it works
fine.
I have no idea what is wrong - please help.
Davedon't use the goto functions and don't use scene info for
navigation: use the goto methods and frame labels or numbers:
_root.gotoAndStop("scene9 frame1"); // <-be sure to label
this frame. -
How Can I Remove Tabs That I Added in a Learning Interaction Widget?
Hello, I inserted a "Tabs" Learning Interaction widget into a Captivate 8 project I'm working on. Adding tabs is easy enough by simply hitting the plus button. But when I want to remove a tab, I can't for the life of me determine how. Any help would be greatly appreciated! Thanks
When you double-click on a Tab button in the Interaction Properties, you'll see a minus sign that will allow you to delete that tab. Beware: you need a minimum of at least 2 tabs, maximum is 5 tabs.
-
I have recently received a copy of the Adobe eLearning suite, in particular I hope to use Flash for the majority of my elearning projects.
I have been having trouble using the learning interactions that come ready to use with Flash. For example, I placed the drag and drop interaction onto the stage area, but when pressing F12 to preview and use this feature it would not work (could not drag the movie objects), the same goes for all the other features I can select radio buttons etc but when pressing the 'cheack answer' button nothing happens.
Even though these interactions come with instructions which i have followed, it still does not seem to work. I do not wish for them to be scored, I just want the user to receive correct or incorrect feedback.
Has anyone used this before and have any idea what I am refering to? Am I suppose to add actionscript to this aswell (even though these interactions have been pre-setup)?
Would really appreciate any help!I am having the same issue!
-
Learning interactions and Flash player
I am trying to place a standalone multiple choice learning
interaction on my timeline. I can place it on the stage and see
everything in the component inspector, (only broke apart once!) but
when I test it, it appears that I cannot see any of the UI
components such as the checkbox or radio buttons. Searching this
forum, someone suggested previously that I had to be running Flash
Player 65? I installed Flash Player 9 from this site to ensure I
had the latest and it still does not work. I tried it at work,
where we are running Flash Player 7 and it seems to work fine. Is
it still my Flash Player? Do these interactions ONLY work with a
specific player? If so I need to know so that I can specify that in
the delivery. Thanks.open the fla in flash and see if there's an flvplayback component on stage. if there is change its size to match your flv. if not, search for .source (as3) or .contentPath (as2). that will lead you to the object that plays the flv and you can assign its size using actioscript .
-
Modify Learning Interactions properties panel
Hi there,
I was wondering if I can modify the parameter panel of a
Learning Interaction component to make it more user-friendly for a
Flash author? For example, I would like to change a single line
textfield to a multi-line textarea. Has anybody tried that and
could provide me with some direction and help?
Thanks,
DanAre you trying to assign the value from the array:
SessionArray[0].interaction_ID to your variable qresult?
If so, you're using the wrong operator symbol. "==" is a
comparison operator (it tests to see if something is equal to
something else and returns a "true" or "false")
To assign the value you'd do this: qresult =
SessionArray[0].interaction_ID; (note the single "=")
Then you can load the value of qresult into your text field
in a separate function called from your button event
handler. -
CS3 Learning Interaction & Plateau LMS
I created a Flash CS3 Learning Interaction and published it
as AICC to be launched through a Plateau LMS. The quiz launches
correctly but does not pass the score or completion status. Does
anyone know what the Activity ID and Activity Name should be for a
Plateau LMS? I tried it using the Item ID and the Content Object ID
already.
Thanks!So you are trying to return the value of the text field
qresult?
vcheck.onRelease = function (){
trace (qresult.text);
Dan Smith > adobe community expert
Flash Helps >
http://www.smithmediafusion.com/blog/?cat=11
http://www.dsmith.tv
"Mike@MTS" <[email protected]> wrote in
message
news:g409j5$st8$[email protected]..
> I've reposted this hoping someone can help.
>
> I'm using learning interactions components to create
question and answer
> session at the end of a lesson.
> I need to get at the interaction tracking values for
each Q&A which will
> be
> used elsewhere.
>
> I have found some Macromedia documentation :
>
> "Tracking properties available in the SessionArray
> The property names references standard interaction
tracking values for
> both
> AICC and SCORM LMS. You can retrieve an interaction?s
properties by
> referencing
> its location in the following command:
> SessionArray[n].[property_name]
>
> For example, to reference the interaction_ID value for
interaction #1, you
> would use this command:
> SessionArray[0].interaction_ID
>
> To reference the result value for interaction #2, you
would use this
> command:
> SessionArray[1].result."
>
>
> I am not great with actionscript so can anyone help. I
need to get the
> information to be passed into a text field.
>
>
> Attach Code
>
> stop();
> var qresult:String;
> var vcheck:Button;
>
> qresult="";
>
> vcheck.onRelease = function (){
> trace (SessionArray[0].interaction_ID);
> SessionArray[0].interaction_ID=qresult;
> }
>
>
> All I get is in the qresult text field is 'undefined'.
>
> Can anyone help please.
> -
Unable to load any Learning Interaction
When attempting to go to the Learning Interactions menu choice from the Interactions top menu, the window that appears loads blank at first, then some of the learning interactions choices appear, but the window does not scroll down to see more samples, and when I click the insert button attempting to insert any of the choices that finally appear in the window, another small window appears saying "Not a valid widget". I have restarted captivate 8.1 on my Mac O.S. 10.9.5. several times, as well as tried this on a number of projects. Please help!
Thanks,Which version do you use? Is CP installed on your system, not on a network drive, and are the folders pointing to your CP-files and cache both on your system as well? Are you connected to the WWW, because there are regular updates and your system will try to download them? Do you run Captivate as administrator? Can you find the interactions, they should normally be copied to a Public folder, under 'Adobe\eLearningAssets' but I don't know where it is on Mac (using PC myself).
-
Tracking Learning Interactions
Hello.
I want to be able to track if the users are completing the learning interactions. Is there a way to track these, like adding them to a quiz or tracking their clicks like buttons?
Thanks.That is a screenshot of all interactions... I know there is almost no documentation about the interactions. I have been presenting about them on conferences and have created a table where I put them in categories. Maybe I should once compile all the references tables and sell them.
Like the widgets there could be normally three types of interactions, but for the moment there are only two of them: static interactions and interactive interactions. With the widget panel in former versions this was a very clear difference, you could even filter on type but that is (sadly) no longer the case for the interactions. Some interactions have associated variables, others do not.
A static interaction can be compared with a static object like an image, text container: they do not have the possibility to be scored at all. They will not appear as a scored object in the Advanced Interactions panel (F9).
An interactive interaction can be compared with an interactive object like a button, a TEB, a shape button, a click box. They can have a score and will then appear in the Advanced Interactions panel. Score can be added to the Total score of a quiz and will then be included in quiz system variables.
The game category has interactive interactions: Jeopardy, Millionaire... but not WordSearch which is a static interaction. They can be included in the Quiz score, can be tracked but beware: the score for the moment will only be a fixed number that is attributed when the game has been played, has nothing to do with the result of the game.
Most other interactions are static: dropdown, Scrolling Text, Tabs, Timeline are some examples. Some of them have a variable associated and with some advanced actions and real interactive objects you could create a score. Enough free teaching for today.
Lilybiri -
Modifying Learning interactions
Hi Everyone
I m working on an flash quiz done by learning interactions
included in flash 8 pro. But i have an extra feature that i want to
add to the quiz. Current setup of the quiz is if the user answers
right question "next" button pops up than user proceeds to next
question, if user answers it wrong 2 times than it automatically
goes on to next question what i m trying to at this point is to
give the right answer to the user if 2 attempts to get the right
answer fails. I m new in both flash and AS so i appreciate the
help.anyoneeee?>
quote:
Originally posted by:
shaytac
Hi Everyone
I m working on an flash quiz done by learning interactions
included in flash 8 pro. But i have an extra feature that i want to
add to the quiz. Current setup of the quiz is if the user answers
right question "next" button pops up than user proceeds to next
question, if user answers it wrong 2 times than it automatically
goes on to next question what i m trying to at this point is to
give the right answer to the user if 2 attempts to get the right
answer fails. I m new in both flash and AS so i appreciate the
help. -
How I can see my interactive button on a tablet or smartphone?
Hey folks - sry for my english...
How I can see my interactive button, created in InDesign CC on a tablet or smartphone. It runs well on the computer but on tablet or smartphone i can't see the button. I save the InDesign file as Interactive PDF but it seems, there must be other things to know. Would be great you guys could help me :-)
Greets!Moving this discussion to Reader IOS
Regards,
Ajlan Huda.
Maybe you are looking for
-
Goods Receipt (MIGO) outside PO and/or Contract Validity Period ?
Hi Gurus, Within our PO process, I created a PO which references a contract. Both have a Validy Period Start and End set up in customizing and filled in. But my problem is that I can still enter a Goods Receipt in MIGO to that PO, after validity has
-
Help! I updated to 07 and now my ipad is asking me for a password! I have never had a password ~ help ~ and my apple id is not working
-
I recently installed Adobe Acrobat 8 Professional and every time I open a PDF file that is stored on my computer, I get a pop-up that asks "Do you want to allow the following program to make changes to this computer?". How do I get rid of this? I d
-
Help: Interesting Problem
I need help. If any compationate soul is willing to help, I would appreciate it greatly!!! Please reply here or send the code to [email protected] Problem: A palindrome problem Study the following interesting fact: (1)Take any number N, (2) reverse i
-
Hi, I have set up kerberos authentication for my application, but I allways get 401 - Unauthorized. I've done all steps from http://e-docs.bea.com/wls/docs92/secmanage/sso.html - Single Sign-On with Microsoft Clients: Main Steps. C:\jaas.conf: com.su