Smart Mailboxes Aren't Working Correctly

Not all of the criteria I have designated for my smart (so-called) mailboxes seem to affect all of my mail. For example, if I set the word "order" to be a condition in the "From" category, not every email with the word "order" in the "From" column is listed in the smart mailbox. Are there a finite number of criteria that can be set? Are the preferences screwed up? If so, where do they reside? Thanks in advance for the help.
2GHz PowerPC G5 iMac   Mac OS X (10.4.4)  

Yes. I also confirm the same. Smart Connect doesn't make the phone quiet. Ideally it would be great if Smart Connect would learn to support all the newest sound tweaks that Sony brought with 5.1: silent with alarm, without alarm, with exceptions, without exceptions... But at least it should support "Silent" mode at all, of course.

Similar Messages

  • Smart Mailboxes don't work with the junk folder

    I've had a Smart Mailbox that worked for many years, but now it wont. This Smart Mailbox is set up like this:
    Contains messages that match all of the following conditions:
    Message is in Mailbox Junk
    Subject Does not contain *VL-JUNK*
    Subject Does not contain *SL-JUNK*
    And that's it. *SL-JUNK* is put into the subject lines of suspected emails by my email hosting company. The reason I have this smart mailbox is to double check emails that Mac Mail thinks are junk but aren't. It's a system that has worked great until recently.
    I've noticed that when I change the Smart Mailbox to this:
    Contains messages that match all of the following conditions:
    Message is in Mailbox Junk
    Nothing populates the mailbox. Are Smart Mailboxes no longer able to pull emails from the Junk folder?
    Thanks!

    go to mail preferences->general and make sure that the box "when searching mailboxes include results from Junk" is checked. if it's checked already uncheck and recheck it.

  • Apple Mail smart mailboxes no longer work

    Well, the subject says it all.
    I am running Mail 7.3 under Mac OS X 10.9.5 and have 8 smart mailboxes set up. However, as of this morning, none of them are displaying any emails, along with all the VIPs. However, all other folders etc are working normally.
    Any suggestions anyone?
    Joe.

    Ok, so I was right about the Combo updater - wouldn't install on my system.
    So I tried all your other suggestions (well, except for installing Yosemite) and no go, although I'm not sure that resetting my file and folder permissions worked properly (I waited 15 mins and still didn't get the 'reset' button back again, so I just continued on with the rest of the steps).
    Here is my Etrecheck results:
    EtreCheck version: 2.1.8 (121)
    Report generated 23 March 2015 9:59:21 pm AEST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,2
        1 3.06 GHz Intel Core i3 CPU: 2-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 4670 - VRAM: 256 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.9.5 (13F1066) - Time since boot: 0:12:30
    Disk Information: ℹ️
        ST3500418AS disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (190.97 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
        ASMedia AS2105 1 TB
            EFI (disk2s1) <not mounted> : 210 MB
            Digital Media (disk2s2) /Volumes/Digital Media : 999.86 GB (274.31 GB free)
        Samsung M3 Portable Samsung M3 Portable 2 TB
            EFI (disk1s1) <not mounted> : 210 MB
            iMac 2TB TM Backup (disk1s2) /Volumes/iMac 2TB TM Backup : 2.00 TB (753.92 GB free)
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
        INNO TECH USB to Serial
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Library/Application Support/VirtualBox
        [loaded]    org.virtualbox.kext.VBoxDrv (4.3.20) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.20) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.20) [Click for support]
        [loaded]    org.virtualbox.kext.VBoxUSB (4.3.20) [Click for support]
            /Library/Extensions
        [loaded]    com.usboverdrive.driver.hid (3.1 - SDK 10.8) [Click for support]
            /Library/Extensions/USBOverdrive.kext/Contents/PlugIns
        [loaded]    com.usboverdrive.driver.bt (3.1 - SDK 10.8) [Click for support]
        [not loaded]    com.usboverdrive.driver.hid.safe (3.1) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) [Click for support]
        [not loaded]    com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) [Click for support]
        [not loaded]    com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) [Click for support]
        [loaded]    com.orderedbytes.driver.ControllerMateFamily (4.6.0 - SDK 10.6) [Click for support]
        [loaded]    com.squirrels.airparrot.framebuffer (3 - SDK 10.7) [Click for support]
        [loaded]    com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) [Click for support]
        [loaded]    com.techsmith.TACC (1.0.2 - SDK 10.8) [Click for support]
        [not loaded]    com.ups.driver.UPSVendor (1.0.0d1) [Click for support]
            /System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
        [not loaded]    com.belcarra.iokit.netpart.panther (1.6.3) [Click for support]
            /System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
        [not loaded]    com.belcarra.iokit.usbpart.panther (1.6.3) [Click for support]
            /System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
        [not loaded]    com.RemoteControl.USBLAN.panther (1.6.2) [Click for support]
            /System/Library/Extensions/ControllerMate.kext/Contents/PlugIns
        [loaded]    com.orderedbytes.driver.CMUSBDevices (4.6.0 - SDK 10.6) [Click for support]
        [not loaded]    com.orderedbytes.driver.CMUSBKeyboard (4.6.0 - SDK 10.6) [Click for support]
        [not loaded]    com.orderedbytes.driver.CMUSBPointer (4.6.0 - SDK 10.6) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [running]    com.orderedbytes.ControllerMateHelper.plist [Click for support]
        [running]    com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [not loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.netputing.handyPrintSystemDaemon.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
        [loaded]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
        [loaded]    com.quark.quarkupdate.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
        [not loaded]    org.virtualbox.startup.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.acronis.monitor.plist [Click for support]
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.parallels.mobile.startgui.launchagent.plist [Click for support]
        [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        DVDAuthorizeHelper    Application  (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
        Wondershare Helper Compact    Application  (/Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app)
        USBOverdriveHelper    Application  (/Library/PreferencePanes/USB Overdrive.prefPane/Contents/Resources/USBOverdriveHelper.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 9.5.5 [Click for support]
        Default Browser: Version: 537 - SDK 10.9
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        1Password
        Open in Internet Explorer
        Video Converter
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Quark Update Preferences  [Click for support]
        USB Overdrive  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 499.25 GB Disk used: 308.27 GB
            Digital Media: Disk size: 999.86 GB Disk used: 725.55 GB
        Destinations:
            iMac 2TB TM Backup [Local]
            Total size: 2.00 TB
            Total number of backups: 36
            Oldest backup: 2015-03-11 08:48:55 +0000
            Last backup: 2015-03-23 10:17:51 +0000
            Size of backup disk: Too small
                Backup size 2.00 TB < (Disk used 1.03 TB X 3)
    Top Processes by CPU: ℹ️
             2%    WindowServer
             1%    fontd
             1%    hidd
             0%    AppleSpell
             0%    com.apple.WebKit.Networking
    Top Processes by Memory: ℹ️
        180 MB    com.apple.IconServicesAgent
        168 MB    Mail
        168 MB    Safari
        129 MB    com.apple.WebKit.WebContent
        90 MB    com.apple.WebKit.Networking
    Virtual Memory Information: ℹ️
        7.36 GB    Free RAM
        3.94 GB    Active RAM
        692 MB    Inactive RAM
        892 MB    Wired RAM
        421 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 23, 2015, 09:47:43 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-21 4743_[redacted].crash
        Mar 23, 2015, 09:47:31 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-21 4731_[redacted].crash
        Mar 23, 2015, 09:46:19 PM    Self test - passed
        Mar 23, 2015, 08:59:14 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-20 5914_[redacted].crash
        Mar 23, 2015, 06:06:37 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-06 0637_[redacted].crash
        Mar 23, 2015, 06:06:36 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-23-06 0636_[redacted].crash
        Mar 22, 2015, 07:18:59 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-19 1859_[redacted].crash
        Mar 22, 2015, 07:09:35 PM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-19 0935_[redacted].crash
        Mar 22, 2015, 08:32:46 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-08 3246_[redacted].crash
        Mar 22, 2015, 08:32:35 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-08 3235_[redacted].crash
        Mar 22, 2015, 07:33:06 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-07 3306_[redacted].crash
        Mar 22, 2015, 07:33:05 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-07 3305_[redacted].crash
        Mar 22, 2015, 07:32:55 AM    /Library/Logs/DiagnosticReports/com.netputing.handyPrintProDaemon_2015-03-22-07 3255_[redacted].crash
    Anyway, I'm gonna try the whole reset of my files and folders again and leave it a lot longer this time and see what happens.
    Joe.
    PS. Thanks again for all your help!

  • Smart Mailboxes aren't smart

    I have set up a smart mailbox to pick up emails to and from a colleague. I have entered his name (from and to contains). Only 4 emails have been placed in the smart mailbox. How can I get the system to pick up the rest?
    (OS X 10.9.1)
    Many thanks,

    How funny. I stopped by looking for an answer to fix the problem I'm having with sync, random signatures, and Conflict Resolver, and then saw this thread and remembered I've got this same problem as well. I just figured it was because my computers can't/aren't running the same version of Mail. My G5 uses 2.1, while my MacBook Pro uses 2.1.1. The way I have Mail set up on my G5 has taken several years to get just right, with many smart boxes, rules, etc., and truthfully, it's just too much of a pain to deal with Mail on the MacBook Pro without all of my personalizations in place, so until sync really syncs everything between the two machines, I don't even turn on Mail on the MacBook Pro. I would like to be able to, so I'm hoping someone has a fix for this.
    Dual 2.7 G5 & MacBook Pro 2.33 Duo 2   Mac OS X (10.4.9)  

  • OSX 10.9.2 mail smart mailbox no longer work.

    I have 4 smartmailboxes, unread, Today, This Week & Last Week.
    They have been working fine until today. Now they remain empty no matter what.
    I have : deleted and recreated the smart mailboxes
                 deleted and recreated the email accounts - one by one (there is an iCloud account + an Exchnage account)
                  created a new user and setup both accounts individually, each time creating new smartmailboxes
                  deleted the accounts and tried an alternative iCloud account, again creating a new smartmailbox
    Nothing I do gets the smartmailboxes to function. They remain empty no matter what I do.
    OS X 10.9.2 (13C64)
    Mail Version 7.2 (1874)
    Mac Mini 5,2 8  i7 , 8 gig   Boot= 240gig SSD 103gig free  2nd drive = 480 gig SSD 300gig free

    Java SE Runtime Environment 7 1.7.0_51

  • Panel menus aren't working correctly on dual monitors

    Hi,
    I posted a question yesterday about this, but no one replied.  Maybe my subject didn't describe the problem so I am trying again.
    I use DW on a dual monitor Windows XP system.  The program is on the main monitor and I move some of the panels/palettes to the secondary monitor which is to the left of the main monitor.  The problem is that when I click the little menu icon in the upper right corner of the panels, the context menus open all the way over on the far right side of the main monitor.  Please see the attached image to see exactly what is happening.
    I have tried everything I can think of to make this work correctly, but no luck.  My Photoshop workspace is set up similarly and the PS palette menus open just as they should.
    Thank you.
    John

    Hi John,
    let your question there and wait, someone will answer to you. AND try to use Google with your appropriate keywords.
    http://groups.google.com/group/macromedia.dreamweaver/topics?hl=en&lnk
    http://groups.google.com/
    Kind regards and good luck
    Hans-G.

  • XL Reporter : Date critaries aren't working correctly

    Hi,
    yesterday I found a bug in my reports.  I wanted to show all transactions between two dates : 08/01/07 and 08/14/07 but the query retrieves records it shouldn't
    FACT JOU( RefDate >= @Date1 And RefDate <= @Date2 And TransTypeCode = "ARInvoice" Or TransTypeCode = "ARCreditMemo" Or TransTypeCode = "CashReceipt" )  Group By JOU.RefDate ,JOU.TransTypeCode ,FIG.OJDT_BaseRef ,FIG.OJDT_Ref1 ,FIG.OJDT_Ref2
    But when I do a similar SQL query using the cast as Datetime, it works perfectly.  Isn't there a way to do something like this with XL Reporter ?
    select RefDate,Memo from dbo.OJDT where RefDate >= cast('05/01/2007' as Datetime) and RefDate <= cast('08/14/2007' as Datetime) and TransId in (select TransId from OJDT where Memo like 'A/R I%' or Memo like 'A/R C%' or Memo like 'Inc%')
    Is anyone had the same kind of problems as me with dates ?  Do you have any solutions.

    It seems critaries doesn't work with dimension, I changed it for a light dimension and the report works correctly.  I don't understand why...

  • Sitemap generator(s) aren't working correctly (I think)

    Hello,
    I followed the lengthy link yesterday that started out as "meta and Google-ing" which then morphed somehow into "best sitemap generator." Following suggestions from Varkgirl, James Tseng and others, I got registered and verified by Google. Thank you for that. It went smoothly and quickly.
    I also followed the forum discussions about creating a Sitemap and, based on the recommendations, I tried two of them. First I tried http://www.sitemap.com/Default.aspx recommended by Varkgirl on 11/21/06. It seemed to work fine and downloaded a html page on my desktop in a matter of seconds. I dragged that onto Fetch and "Put" it to the server (ftp-dom.earthlink.net - with whom I have my primary email service. Getting a new website up on Earthlink was, happily, very easy.)
    What I got back from SitemapDoc SEEMED incomplete - just the Home page was shown. I fiddled with ""edit existing map" and nothing happened that I could see. (I'm open to the idea that it's me, not the software.) I dragged the icon from the Fetch webdocs window in to the trash.
    Then I tried another website generator that had been recommended by Rebecca as the super dooper one - xml-sitemaps.com. I did that because of her high praise and, also, because of a comment James Tseng has made in a 11/02.06 response to Tormance saying "...the sitemap.xml file. (Emphasis on the ".xml" file - thinking that maybe that xml was better.)
    While I've read the definitions of html and xml ,I don't know the difference except that they are both markup languages for websites.
    The xml-sitemaps.com sitemap page - downloaded to my desktop - showed the correct total number of web pages - 11. I should say that I chose to download the sitemap to the desktop and not to use iDisk. Perhaps that's part of the problem that ensued. I grabbed the sitemap.xml icon on the desktop and dropped it on to the Fetch webdocs page/window and clicked "Put." Fetch started to upload and all seemed to be fine. Initially I recognized page names, artwork names, Haiku lines from the new website. I got very nervous when it was still uploading after 25 minutes and I saw, among dozens of other files and folders, "Acobat Reader 5.0 sitz as Stuffit X Archive" (nothing on the website I created used compressed material), "Reader .pdf binary data," SVGA GMG carbon raster lib.sitx as Stuffit X archive," and, most scary, the beginning download of a file titled "passwords...." It looked to me as though it was uploading my entire hard drive - like something from a great 60s or early 70s movie, "Collosus the Forbin Project." I stop the Put at that point and trashed the sitemap.xml file.
    Your suggestions are most welcome and appreciated.
    John
    PowerMac G4 and MacBook Pro   Mac OS X (10.4.9)   MacBook Pro laptop 2.16 GHz, 2 GB 667 MHz DDR2 SDRAM, G4 runs OS 9.2.2 & 10.4.9

    Related to my original question (below),
    Is there a technical reason - other than the practical reasons of backup and storage - to use iDisk to house my website? I currently have it in a desktop folder. In my original post I asked if not storing the website on iDisk might be part of the problem in not being able to create a sitemap.
    Thanks.
    Hello,
    I followed the lengthy link yesterday that started
    out as "meta and Google-ing" which then morphed
    somehow into "best sitemap generator." Following
    suggestions from Varkgirl, James Tseng and others, I
    got registered and verified by Google. Thank you for
    that. It went smoothly and quickly.
    I also followed the forum discussions about creating
    a Sitemap and, based on the recommendations, I tried
    two of them. First I tried
    http://www.sitemap.com/Default.aspx recommended by
    Varkgirl on 11/21/06. It seemed to work fine and
    downloaded a html page on my desktop in a matter of
    seconds. I dragged that onto Fetch and "Put" it to
    the server (ftp-dom.earthlink.net - with whom I have
    my primary email service. Getting a new website up on
    Earthlink was, happily, very easy.)
    What I got back from SitemapDoc SEEMED incomplete -
    just the Home page was shown. I fiddled with ""edit
    existing map" and nothing happened that I could see.
    (I'm open to the idea that it's me, not the
    software.) I dragged the icon from the Fetch webdocs
    window in to the trash.
    Then I tried another website generator that had been
    recommended by Rebecca as the super dooper one -
    xml-sitemaps.com. I did that because of her high
    praise and, also, because of a comment James Tseng
    has made in a 11/02.06 response to Tormance saying
    "...the sitemap.xml file. (Emphasis on the ".xml"
    file - thinking that maybe that xml was better.)
    While I've read the definitions of html and xml ,I
    don't know the difference except that they are both
    markup languages for websites.
    The xml-sitemaps.com sitemap page - downloaded to my
    desktop - showed the correct total number of web
    pages - 11. I should say that I chose to download the
    sitemap to the desktop and not to use iDisk. Perhaps
    that's part of the problem that ensued. I grabbed the
    sitemap.xml icon on the desktop and dropped it on to
    the Fetch webdocs page/window and clicked "Put."
    Fetch started to upload and all seemed to be fine.
    Initially I recognized page names, artwork names,
    Haiku lines from the new website. I got very nervous
    when it was still uploading after 25 minutes and I
    saw, among dozens of other files and folders, "Acobat
    Reader 5.0 sitz as Stuffit X Archive" (nothing on the
    website I created used compressed material), "Reader
    .pdf binary data," SVGA GMG carbon raster lib.sitx as
    Stuffit X archive," and, most scary, the beginning
    download of a file titled "passwords...." It looked
    to me as though it was uploading my entire hard drive
    - like something from a great 60s or early 70s movie,
    "Collosus the Forbin Project." I stop the Put at that
    point and trashed the sitemap.xml file.
    Your suggestions are most welcome and appreciated.
    John
    PowerMac G4 and MacBook Pro   Mac OS X (10.4.9)  
    MacBook Pro laptop 2.16 GHz, 2 GB 667 MHz DDR2 SDRAM,
    G4 runs OS 9.2.2 & 10.4.9

  • All user mailbox search not working correctly

    I have just started a job at a new company as their exchange admin. One of the tasks they want me to do is delete a few
    spam emails that went out to many users. I planned on using the search-mailbox cmd to find them and then delete the email messages. However I cannot seem to get this to work right for me. 
    The commands I've tried are 
    Get-Mailbox -server server01 | Search-Mailbox -SearchQuery 'Subject:"Alert:Somebody has run a back*"' -TargetMailbox "mymailbox" -TargetFolder "test" -LogOnly -LogLevel Full
    Get-Mailbox -database database1 | Search-Mailbox -SearchQuery 'Subject:"Alert:Somebody has run a back*"' -TargetMailbox "mymailbox" -TargetFolder "test" -LogOnly -LogLevel Full
    Get-Mailbox -resultsize unlimited | Search-Mailbox -SearchQuery 'Subject:"Alert:Somebody has run a back*"' -TargetMailbox "mymailbox" -TargetFolder "test" -LogOnly -LogLevel Full
    These all run normally, however the results message in outlook that I get is "The search has Failed." Says errors:
    None. Searched 173 mailboxes. 
    If I change the command to this: 
    Get-Mailbox -identity user1 | Search-Mailbox -SearchQuery 'Subject:"Alert:Somebody has run a back*"' -TargetMailbox "mymailbox" -TargetFolder "test" -LogOnly -LogLevel Full
    The search comes back and I get the email i'm looking for. So it works as expected with only one user selected. 
    Does anyone have any ideas on what could cause the multi-mailbox search to not function as expected?

    Is the account you are using a member of the domain admins group?
    I think there is a Full Access = Deny permission that might come into play.
    By default, domain admins cannot access mailboxes (even though, of course, they could change permissions to make that possible).
    EDIT - I do see it worked on  one mailbox - I'm not sure how the permissions may have been configured.
    This is the cmdlet I used to see permissions. Domain Admins *do* have full ADPermissions
    Get-Mailbox user1 | Get-MailboxPermission
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Actions aren't working correctly in Photoshop CC 2014

    Hey guys,
    I hope someone can shed some light on this. I have several actions for Photoshop, that have been working fine in CC 2014. But today when I tried to use one, it would load up fine, though the end result would look wrong.
    I got 2 friends at work to try the same action and it worked fine for them. Not sure what's going on. I tried the action in the original version of CC and it worked fine, which is weird.
    I hope someone can help.
    Thanks
    L

    At this moment, I have tried : Reset the "Adobe Photoshop Settings File" (When you open Photoshop, push "option + command + shift" for Apple).
    Not ok.
    See here.

  • ITunes and iPod aren't working correctly

    So, I go and buy my new laptop today, with hopes of loading all my music that I backed up onto 4 DVDs. I go to load my music from the DVDs and they don't work. Whatever. So I go and follow Apple's instructions on how to backup my library on my iPod, then transfer it over to my computer. I followed their instructions, but to no avail. Nothing worked. I can run iTunes by itself flawlessly, but when I plug in my iPod, it automatically freezes my iTunes. I can't do anything with it now. I need some advice, because Google keeps leading me to dead ends. My iPod works fine, but not with the laptop/iTunes. I'm using the latest version of iTunes for 64 bit Vista.

    hi y'all!
    hmmm. sounds like it's worth checking up on this possibility:
    iPod: What to do if Windows displays an "itunes.exe - Corrupt File" message
    love, b

  • My iPhone 4 text messages to none iPhone phones aren't working correctly

    When I send a text to my friends with Droid phones the text character count doesn't seem to matter. I can send a text which in my iPhone is 320 characters which is in most phones had been two text... 160 characters had seemed to be commonly one text message on many phones for a long time. Now with the Droid smart phones the 320 or 160 character count doesn't seem to matter. My texts get broken up into three or four on their phones. Also picture texts files from my phone to theres seems to large for them to view quickly if at all. Many of them use an App for texting called Handcent. I looked into this but it appears to use this on my Apple phone I have to hijack my phone if you will otherwise its incompatable. I'm the only Apple user in my crowd if you could help me find a solution so when I text my friends its fun and easy for them to recieve my texts again that would be great!
    BTW, I do have my MMS turned on in my phone already.
    Thanks!!!

    Do you have the "send as SMS" setting turned on maybe that's the problem you might just have turned on your iMessage setting instead

  • Illustator CS6, my quotation marks aren't working correctly?

    Illustator CS6, my quotation marks are coming up either pointing in the wrong direction, or sitting on the baseline. I've restarted. I've changed the font. Tried pasting from another program.

    Are you getting the normal 66, 99 quotes? Can you post a screen shot? You can also go into Menu>Type>Glyphs with the type selected to see the charactors or glyphs in the font you are using.

  • All my purchases aren't working correctly

    I just spent the last hour and a half reading all the problems people are having with the latest iTunes update. I hope all your problems are solved. However, no one seems to be having the problem I am. I upgraded to 8.1.1 two days ago and now all of the songs that I purchased from the iTunes store have weird digital pops and clicks while being played. They also sound as if the song is playing too fast and it is trying to keep up. This also includes all free downloads I have from the free section. Furthermore, when I go to the iTunes store and listen to a 30 second sample I am having the same problem. All songs that I personally put in the library via CD or other method play just fine. Normally I would have just assumed this was a bug and it would be fixed but when I couldn't find anyone else with the same problem, I got a little worried. Anyone????

    You can think of iTunes as a content manager "front end" for QuickTime. It's QuickTime that is actually doing all the media playback functions.
    Forgive what might be a dumb question on my part, but you've tried restarting your computer? If so, you might look for any third-party QuickTime plugins (DivX, 3ivX, etc.) or iTunes additions and if there are any try removing them and see if that has any effect on the issue.
    Hope this helps.

  • Smart feed not working correctly

    hello,
    the smart feed are not working correctly in this course page :
    https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
    Modified=01ca6e794f33e660
    I don't understand why...

    C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
    It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

Maybe you are looking for