Smart Mailboxes: Why don't they update in real time?

I have a Smart Mailbox that shows me any Unread messages i have. As i read these messages, they become Read messages, yet they remain in the Smart Mailbox. Is there any way to initiate a real time update to these so that I am not required to switch Smart Mailboxes to initiate the update.
Not very 'smart' are they…
Any solutions are welcome.d

sphereboy wrote:
That all sounds correct on paper. But in real life it just doesn't work out that way. Let's say I have 20 Unread messages in my Unread SmartMailbox. As I read each message they become Read messages. The messages do not automatically clear this mailbox. They stay there in a Read status inside the Unread Smart Mailbox. The only way I can update the mailbox is by switching over to another mailbox, any mailbox, and back to my Unread Smart Mailbox and then it properly shows only Unread messages.
And that is the correct action...the update trigger is when you move out of one and into another (acts as a confirmation that you're done).
Seems appropriate and a small price to pay. It would seem to be a burden if otherwise as it would always be working while you were trying to read....can't have everything at once

Similar Messages

Why don't they update this to 802.11n?

http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=AAE D0CA4&fnode=standard/home/shop_mac/software/apple&nplm=M8881LL/A

802.11n requires multiple antennas. The Macs compatible with the AirPort Extreme card do not have those antennas.

Why is Maps not updated in real time ?

I leave in Bordeaux, France. Despite my many feedback through the Maps app either on iOS or Mac no significant changes or improvment were made by Apple. The map of Bordeaux is wrong in many points. I always have to use Goggle maps or Waze for driving. Even a big bridge accross the river is missing. Some places names ames are wrong. Many POI are missing. As maps uses mostly the Yelp date base which is not very popular here in France, many palces are missing. Could Apple take this points seriously into account ? thx for reading

http://www.apple.com/feedback/macosx.html
Regards.

Why don't they put how much usage each update will take. I am on broadband and not sure if I have enough GBs left to do an update.

I have broadband and it just cost me $75 OVER my monthly bill to download Yosemite and the update for iphotos. NOW, I have notice that it needs two more updates. Why don't they tell us how much data will be used with an update so we can plan when and which updates to do now, and some later? The old system they had, they did tell and I was able to ration out which ones to update over the months.

It all depends on how much you'll use the iPhone for internet access. Personally, I use it frequently (work email, browsing with Safari, the Amazon.com app, etc.,) and I use 200-300 MB per month. My wife does not use her iPhone for much outside of email, weather, etc., occasional Internet browsing, and she uses 40-50 MB per month. So, you should be fine with 150 MB.
Hope that helps...

Why don't they add an update where there is a password recovery feature?

ive lost many of my apple tech and its gone to waste losing finding them because i forget my password. why don't they have a system to recover your password?

They do. If you forget your Apple ID password, you go to Manage your Apple ID and click on Reset Password and answer your Security Questions....
Is that what you are referring to?
GB

Why don`t you update your themes?

When you update firefox, at the same time why don`t you update themes?

Themes are developed by third-party developers, they need to update them. However, you are using a beta version of Firefox, alot of themes just don't support beta.

IS IT IMPOSSIBLE? My iTunes library says 4149 songs, my iPhone says 4148 songs, and my iPad says 4147 songs. Why don't they match?! How can I fix it???

My iTunes library says 4149 songs, my iPhone says 4148 songs, and my iPad says 4147 songs. Why don't they match?! How can I fix it???

Yes. I selected all songs and checked them (in case I missed a few) and synced. I have also tried uninstalling iTunes and reinstalling it. I tried selecting all songs and unchecking them, re-syncing my phone (which didn't get rid of the songs on my phone like i thought it would), then selected all songs again, checked them, and resynced again--nothing changed. I went to the iTunes store and selected "Check for all available downloads" and it gave me the message"All purchases have been downloaded for this account." I checked for duplicates, deleted a few and resynced. This reduced the number of songs, but it still doesn't match what the iTunes library says...I don't know what to try next...

My UI preferences are set to identical settings in Illustrator and InDesign, why don't they look the same?

My UI preferences are set to identical settings in Illustrator and InDesign ("scale to lower supported scale factor") and AI looks perfect, ID is too big. Why don't they look the same if the settings are the same? Driving me CRAZY. I have my windows scaling factor at 124% and it needs to stay enlarged, otherwise nothing else on my system will be readable. The inconsistency of the workspaces is so annoying.

Hello billwoodard11,
Thanks for the question. If your computer is not compatible with HD 1080p content, you should receive a prompt stating so - but should still be able to download the content for use on other devices. For more information, check out this resource:
Purchasing and viewing HD videos in iTunes - Apple Support
http://support.apple.com/en-us/HT201850
How to purchase, download, or view HD 1080p content
iTunes 10.6 by default is set to purchase, download, and playback HD content in 720p. You must change your local preference setting if you prefer to download, purchase, and playback HD content in 1080p. Depending on your computer's hardware configurations, you may be unable to purchase, rent, or playback content in 1080p. iTunes may display the following dialog:
On Mac or PC
Download the latest version of iTunes. You can download iTunes for free.
From the iTunes menu, choose iTunes > Preferences > Store (for PC, choose Edit > Preferences > Store).
Next to "When downloading High Definition videos, prefer:" set your preference to 1080p1.
Click OK. Now, when you purchase or download HD content, your computer will always download in 1080p, when available.
Depending on your computer's hardware limitations, you may be unable to purchase, rent, or view HD content from the iTunes Store. If you are trying to view HD video on an external display, the display must have a digital connection (DVI, DisplayPort, or HDMI) and support HDCP.
Check out the following resource for information on downloading past purchases, including information on playing purchases on Apple TV:
Download past purchases - Apple Support
http://support.apple.com/en-us/HT2519
Thanks,
Matt M.

Now that iPad has multitasking gestures, why don't they just add a gesture for going back and forward in safari?

Now that iPad has multitasking gestures, why don't they just add a gesture for going back and forward in safari? Just like in a mac, with the multitouch gestures. The osx Lion got the launchpad idea from the ios, so why don't the ios gets something from osx?

Send them feedback and make the suggesion. We're just fellow users here, we have zero control over anything Apple does.
http://www.apple.com/feedback/

Why don't they have a 16gb 5g iPod touch?

Why don't they have a 16gb 5g iPod touch?

the reason is that people are using more and more memory so because the pictures are higher in resolution they use more memory with the retina display so they need the extra memory to store more photos/applications/movies and of course videos that you record.

Getting Scopes to update in real time....

So, I know I can set the Program monitor to scopes, but then I lose the program. I know I can set the reference monitor to scopes and leave the program in the program monitor, but then the scopes don't update in real time. Arrgghh!!!!
Any way to do this, or is this yet another feature request issue.....? I used this all the time in FCP and it's kinda lame not having it.

Really? I figured it was a memory issue, and that if you have a smokin fast machine that they would update in realtime. Guess not...

Edit in datasheet field is not updated in real time

Hello,
I have SharePoint 2007, a list viewed in Edit in DataSheet and a workflow attached to the list which updates a field FirstTitle in the list when the item is created.
The problem is that, while in Edit in Datasheet view, the field FirstTitle is not updated in real time so the workflow starts again and again because the field is still viewed as empty. The users keep receiving the error message "Your changes conflict
with those made concurrently by another user" (the other user being actually themselves). So they have to exit Edit in Datasheet and enter again in order to have FirstTitle field refreshed and that is annoying and totally unproductive.
I tried from SharePoint designer different checks, I used different actions like wait until item is changed and then stop but nothing worked. Is there any workaround to this ?
Thanks in advance,
Teddy
Able was I ere I saw Elba

Thanks for sharing the answer here, it is really helpful for others with the similar issue.
Qiao Wei
TechNet Community Support

Dynamic Update in real time with slider control

We have requirements to display complex data in a graphical format. So far this has gone well by leveraging ADF and DVT components (dvt:Map, dvt:gauge, dvt:bargraph, af:tables, af:inputNumberSlider, etc.); however, we recently have been asked to add real-time animation of these controls over time. In brief, the user requires the ability to control the on-screen visualization of data by sliding the control on an af:inputNumberSlider (or equivalent) that represents a multi-month time scale. While sliding this control, the user expects to see the data visualization controls dynamically update in real time, keeping up with the rate at which the user moves the slider control. Think of this like a flip book animation where the slider controls the page the user is looking at and they can flip through the pages forwards or backwards at any desired speed. The time slider increments are one hour.
Our current application architecture:
Oracle ADF Fusion Web Application (v 11.1.1.5)
EJB 3.0
Eclipselink
Oracle 11g
Any kind of help is highly appreciated.
Thanks,
Mehabub

Hi,
the af:inputNumberSlider does not provide this functionality. Your alternative is a custom component (or any component that raises a client JS event) and call an af:serverListener in a custom event to send the notification to the server.
Frank

Updating a Real-time Infocube

Hi All,
In one of the requirements in BPS planning.
We are using the Exit function for validating the data.
In our function module we are fetching the data and two of the fields in the cube needs to be modified in the cube after completion of the validations.
I would like to know if there is any existing functionality or Function module in BPS planning for this for updating the Real-time Info cube.
Thanks
Prathish

Try this link:
www.geocities.com/cynarad/reference_for_bps_programming.pdf
In the chapter where table xth_data is described more detailed this can be one possibility to validate your realtime IC.
Have fun,
Clemens

Smart mailboxes not working after latest update

My smart mailboxes are all showing empty, including one whose entire duty is to show unread mail.
How do I restore their functionality? I did the index build but from what I can tell that does not affect smart mailboxes.

Thanks for your suggestion, it has solved my difficulty. For informational purposes I will publish my post and the solution in hopes it will assist others.
I am running Final Cut Pro 6.0.5. My Sony SR12's drive is recognized during the Log And Transfer process. The problems continue. All of the thumbnails have a grayish/brown band going right through the middle of each one. I am able to play the clip in the Log and Transfer window but as soon as I attempt to drag the clip to the media box, FCP crashes. I had this same problem with iMovie 7 and found that updating to the latest version solved the problem. In this case however, FCP 6.0.5 is the latest version. I have the same problem with Final Cut Pro Express 4.0.1 but again, not with iMovie 7.1.4. I loaded Sony’s XDCAM software as well just in case but it did not do anything to help the situation.
When I trashed the Perian component along with QuickTime preferences it did the trick. I believe it was the old version of Perian causing the conflict with Final Cut Pro’s Log and Transfer option, not the Quick Time preferences. When I installed the newest version of Perian which is 1.1.3 there didn’t seem to be any conflict and the HD clips from my Sony SR12 imported fine with no further crashes.
MacBook Pro 17" 2.33 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Mac OS X 10.4.11
Final Cut Pro 6.0.5

Smart Mailboxes: Why don't they update in real time?

Similar Messages

Maybe you are looking for