Smart media slots no longer recognized in Pavilion d5200t. Any ideas?

None of the 4 camera memory slots are recognized. Running Vista Ultimate 64bit. They worked fine several months ago.

Similar Messages

Iphone4 when connected to itunes on comp is recognized as a camera any ideas how to fix it?

Iphone4 when connected to itunes is recognized as a camera, any ideas?

Windows http://support.apple.com/kb/TS1538
mac http://support.apple.com/kb/TS1591

Upgraded MAc pro to Lion now I no longer can open window office. any ideas?

upgraded Mac Pro to Lion, now no longer can use windows office. any ideas?

You need MS Office 2011 if you've installed Lion. Previous versions of Office don't work with Lion.

My G5 recently began to act strange. I could no longer print ton any printer. all of my Adobe software would crash on startup as did Safari. tried to reload the printer software and was denied as I was no longer recognized as the administrator. any fixes?

my G5 recently began to act strange. I could no longer print to any printer and all of my Adobe software and Safari would crash on startup. attempted to re-install my printer software, but was denied as the computer no longer recognized me as the administrator even though i am the only account on the computer. Performed a system install (w/ bakup of previous), this seemed to work for about two days and the problem has returned with other software (Excel) crashing on startup. does anyone have any suggestions? do i need to erase the harddrive and start over?

I suggest you backup you important data!
I suspect the harddrive is going bad.
Run disk utility. verify disk & verify permissions.
Run hardware diagnostics.
I not sure of a good way of telling if the harddrive is going bad. There is software to test harddrive. Don't know of free stuff for mac.
Considerng that the hd is 7 plus years old this isn't a surprise.
Suggest replacing hd.
If your not up to that, get an external hd.
You need an external Firewire drive to boot a PowerPC Mac computer [ a few G5's will boot from USB ].
I recommend you do a google search on any external harddrive you are looking at.
I bought a low cost external drive enclosure. When I started having trouble with it, I did a google search and found a lot of complaints about the drive enclosure. I ended up buying a new drive enclosure. On my second go around, I decided to buy a drive enclosure with a good history of working with Macs. The chip set seems to be the key ingredient. The Oxford line of chips seems to be good. I got the Oxford 911.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the cameras WIFI. Since I installed IOS7 the connection no longer works. Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7. The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

No luck importing from SonyHandycam DCR-DVD650? I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera. Any ideas what the issue could be?

I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book. I am using the USB connection. The macbook is not recognizing the camera. The macbook is running OSX 10.6.8. Any ideas on what the problem could be?

http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
According to this website the camera should be compatible with iMovie '11
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
So here's some steps to take to get the Mac to recognize your camera.
1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
No guarantees, but some things to try

SX280 HS no longer recognized as connected to any computer/ device

I purchased the brand new PowerShot SX280 HS three weeks ago. Being a person that actually reads directions and owners manuals, I followed the Getting Started booklet exactly as stated to connect the camera to my Win 7 (64-bit) PC, and it worked well to automatically transfer my photos to the computer via USB cord using CameraWindow.
Within a few days, I had also set up the camera's wifi connection to the same computer, and it worked fine to transfer selected photos to the computer. I *think* that I could still also connect to the computer via USB at that time. I also set up wifi connections to various email addresses and to Canon's iMAGE Gateway online. However, I was never able to connect via wifi to my tablet (Motorola XOOM, Android 4.1.2)
A few days later we took a week-long trip out of town for our dd's college graduation (the whole reason for the camera upgrade). Rather than waiting a week to download the photos to the home computer, we tried to connect the SX280 to our Win 7 (32-bit) laptop via USB, having previously installed the Canon software. However, the laptop would never recognize being connected to the camera. After trying the set-up several times, we finally succumbed to using ImageBrowser to import the pictures directly from the SD card inserted into the laptop.
Upon returning home, I wanted to download the pictures to the home PC, but now had the same problem as with the laptop: CameraWindow, ImageBrowser, and Windows Explorer all gave me the same error - no camera detected! Tried using ImageBrowser to import the pictures from the SD card inserted into the PC, but even that was not recognized by the computer! Finally got the computer to "see" the SD card when I put it into a USB card reader and connected that way. Whew!
Tried again today to connect the camera to the home PC, but still no recognition by the computer of there being a camera connected via USB. In an attempt to start over from the beginning to connect the camera to the computer, I resorted to removing that computer from the camera's wifi settings, deleted the camera profile from the computer's list of devices, and removed all the Canon software from the computer, Alas, during the software installation process, when the time came to connect the camera via USB to the computer, I received the same error - could not detect any camera as connected to the computer!
Did setting up the wifi connections somehow disable the ability to connect via USB?
What to do??? There is now a big Firmware Update available for this camera to correct a major glitch, but I fear I will not be able to install the update if the computer cannot detect the camera.

When using other imaging devices with your computer, the conflict between the two (or more) devices and software may corrupt the camera driver, which is provided by Windows.
You've already done some of this, so I apologize, in advance, but I'm going to ask you to go back to the Device Manager.
Before you go: If your computer is a desktop unit, is the USB cord plugged into the back of the computer? (Recommended) If it's a laptop, is your computer running on AC power? (recommended)
Now, on to the Device Manager:
1. Click on the Windows Icon (used to be the "Start" button.
2. Click on Computer.
3. Click on System Properties.
4. Click on Device Manager and expand "Portable Devices".
Now, while keeping an eye on the Device Manager, connect your camera and power it on in the playback mode.
If you see the camera driver appear, please right-click on it, then choose "Delete". Next, turn the camera off for a few seconds (10 or so), then turn the camera back on.
What happens?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

After setting up my brand new Airport Express 802.11n and accidentally using it to connect my iMac to the network...my iMac no longer connects through Ethernet? Any ideas...I have tried everything without success!!

I have been using Apple technology for about 10 years starting with 1st generation iPods and our house now includes a 5 year old iMac, all versions of iPods and touches, Apple TVs (both generations) and most recently an iPad 2. I have always told family and friends that Apple technology just works. Unfortunately that stopped today. I bought a new Airport Express 802.11n to use for AirTunes around my new pool. I set it up from my iMac and accidentally used it to connect my iMac to the network for a short time. Now I can no longer connect the iMac to the network using a hard wired Ethernet cable. I have tried resetting everything possible, from hubs to routers to the Mac itself and it just will not connect to the network through Ethernet any longer. I am now a very frustrated Apple user especially when the support site says I can't use the fast path support because my product was manufactured 5 years ago...I just bought it at BestBuy yesterday. All other computers and itechnology in the house are connecting via wifi and Ethernet without any issue except from my new iMac boat anchor. Anybody who can help me??? Thanks

John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts???

Changing date (and sequence) of events by changing dates of photos no longer seems to work. Any idea what to do?

I am scanning in old slides and negatives (from the 1960s and 70s), and I want to get the resulting "events" in sequence from when the photos were taken, rather than when they were scanned. So I have been changing the dates of the photos, and previously this resulted in the associated event moving to the proper sequence. This definitely worked a month or so ago, both with prints scanned in on a flat-bed scanner, and also with slides and negatives scanned with a Veho scanner. That was faulty, however, and so it has been replaced with a Plustek 7500i scanner, using SilverFast scanning software, and importing the resulting images into iPhoto. I have recently tried to change the dates of the resulting events, and it doesn't seem to work as it used to. There has been an update to iPhoto 9.1.3 since my earlier success.
Take for example one event, CS73A. Hovering over the event in the "All events" display gives dates of 1 Apr 2011 to 2 Apr 2011; these are the dates the slides were scanned in. If I open the event and choose the Info tab, it gives the event date as 02/03/1973 (which is the approximate date that I changed it to). I had done a batch change on the event this time, so the date and time on the first slide is 2 March 1973 09:30:48. Each successive slide is 1 minute later, and the last is 2 March 1973 10:08:48 (38 slides). I asked for the dates in the files to be changed as well.
I don't know what I'm doing that's different from before. The only things I can think of are (a) something has changed in the iPhoto update, or (b) the SilverFast software stores the scanning date in some part of the EXIF that iPhoto can read but not change. I don't have tools to examine the EXIF unfortunately.
What to do?

Chris, I have run into the same problem.
Try this:
Open an event with more than one photo in it.
Adjust the date of one or more photos. The event date does not update.
Delete any one photo. The event date now updates to match the above date change.
Undo the delete photo. The event date stays matching.
Change the date of any photo again. The event date updates now every time.
If you close the event and reopen it, you have to start over with the delete one photo thing.
I don't understand it but it works here.
I also have had the problem of events not sorting themselves in order of the dates when VIEW, SORT, BY DATE is selected. This seems to affect only the events were photo date changes had been made. Using the delete thing seems to keep the events in order.
Another funny thing: When I put photos into iMovie the times in iMovie show as 7 hours off the photo time.
I think Apple owes us an update to iLife!

After using as modem, can no longer send/receive email. Any ideas why?

My IT department recently upgraded the service to include use of Blackberry as a modem. That works fine...the problem is each time I connect to the computer, it somehow wipes out my setting on the once I unplug, I'm on an Enterprise Server so each time this occurs, my IT folks have to reset my password.
Sprint had me erase the "Service Books" on the phone and then gave me a new one but that did not work.
Thanks in advacne!

I suggest backing up your device, then preforming a clean application load of the device software. To do this see the article below:
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for Windows - KB11320
http://www.blackberry.com/btsc/KB11320
Hope this helps.

Ipod nano 3rd Gen no longer shows in iTunes devices, any ideas?

This ipod operates fine but when I connected it to iTunes (latest version) on my iMac it doesn't register as a device so I can't sync etc. Connecting an iPad DOES show up in iTunes devices.
The above problem appeared in Ox Snow Leopard and in just installed Mountain Lion.
Any help would be much appreciated

The latest version of iTunes may hide the sidebar. To show the sidebar, from the menu bar, under View, select Show Sidebar.
With the sidebar visible, does your iPod appear in the sidebar, under DEVICES?

HT1430 i have a pc and when i hook up my ipod or iphone it no longer takes me to itunes, ANy ideas?

i had an iphone 4 and just got an iphone 5c. last week before i upgraded, my ipod and iphone stopped connecting directly to itunes. how do i reset my pc for this to work

WIndows is asking you to reformat the iPod's hard disk because it's probably in the Mac OS X Extended Journaled file system format which the Windows OS can neither read or write to. Reformatting will erase all content from the device and rebuild the filesystem as FAT32 unless you specify it as NTFS (which you shouldn't do).
If you want to be able to use your iPod to copy music from your Mac to your PC, you'll need to either pre-format it as FAT32 using Disk Utility on your Mac and then copy everything over to your PC, or use third party software such as XPlay that allows a Windows PC to read and write to a Mac formatted iPod.
Perhaps you could take a look at this article for other ways to copy your iTunes library and files from your Mac to the PC.
iTunes: How to move your music to a new computer
B-rock

When I plug my iPad into my MacBook Pro, neither device is recognizing the other. Any ideas?

The iPad shows it's charging, and the MacBook says "No Camera Found," but NOTHING else is happening. UGH!

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Replaced Podcast. Works on feed, but iTunes hasn't recognized it...Any ideas?

Hello,
I'm having a problem and would appreciate any help. I accidentally exported an MP3 podcast file with one of the audio tracks turned off and uploaded it to my wordpress site without realizing it. I use Feedburner to create my feed that iTunes reads to get my podcasts and it worked out fine and put up my latest podcast. My friend let me know that I was missing something, so I fixed it and uploaded a new one with the same name and everything. It works fine in the feed, but the podcast has disappeared in iTunes. I assumed that it would and would eventually re-appear, but it has not. Any ideas?

Sure.
Here is the URL to my feed:
http://feeds.feedburner.com/BOEG-EvilGeeksPodcasts
And here is the URL to my itunes store page:
https://itunes.apple.com/us/podcast/brotherhood-evil-geeks-transmissions/id59179 5202
What's even weirder is that my laptop is subscribed to the podcast and when I launched iTunes today it downloaded the new one with the updated audio, but it is not visable online or in the store itself. Its really odd?
Thanks for your help Roger!

My IPad no longer sends outgoing emails. Any ideas?

I have an IPad that suddenly stopped sending messages. It places all messages in my outgoing box and says it does not allow relay from the server. Any ideas ?

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Smart media slots no longer recognized in Pavilion d5200t. Any ideas?

Similar Messages

Maybe you are looking for