Smart Object drag-n-drop displacement. Photoshop CC

For some reason I observe Smart Object displacement by 4 px on both axis during drag and drop files from OS into Photoshop document (Photoshop CC, Windows). I believe such behavior did not occur in previous versions. Maybe I do something wrong?
P.s. Document size is the same.

Document size is the same.
Size and resolution?
I’m on a Mac, so not being able to reproduce it probably has no bearing on the issue for you.
Consider this a bump, though.
If the issue is consistent you may want to report it over at
http://feedback.photoshop.com/photoshop_family/
if you haven’t already.

Similar Messages

Edit a smart object by a deformation in photoshop

Edit a smart object by a deformation in photoshop
Hello
I'd like to know if it is possible to edit a smart object by deformation (type rotation..) (in
A dynamic layer above another layer (a round for example) when I apply a rotation of the round cela applique on the picture of the underside, of non-destructively
Thank you

Edit a smart object by a deformation in photoshop
Hello
I'd like to know if it is possible to edit a smart object by deformation (type rotation..) (in
A dynamic layer above another layer (a round for example) when I apply a rotation of the round cela applique on the picture of the underside, of non-destructively
Thank you

Drag and Drop into Photoshop layer without resizing the source image

Hello,
I am using Photoshop CS5, 64bit, in Windows 7.
I went through following steps and getting result that I do not want:
1. Open an existing photopshop file.
2. From the explorer window of my folder, select 100 png files and drag into the graphics area of the open photoshop image.
Result: Photoshop resizes the png file and place it as a layer. It also asks me to commit the resizing for each individual file that I dragged and drop. Sometimes, it takes it as 100% scale, sometimes, 98%, sometimes 102%. If I change it to 100%, then it is not the original size. The image become larger and blurry.
Expected Result: Place 200 png files as separate layer of the open photopshop without resizing it.
My png files are icons that don't need resizing. I cannot tweak 200 images just to get this to the original dimension!
Other things I tried:
I turned off the "Preference->General->Resize Image During Place". I also turned off "Place or Drag Raster Images as Smart Objects".
I still get the same result. I need nothing smart here. Just let me place images without any smart stuff!
I also went to help and googled. I could not find what I need.
Thank you!

That works!!
Thank you!

Cannot Drag 'n Drop in Photoshop CS3 on Mac

Very frustrating.
I cannot drag 'n drop any image file from Bridge CS3 or from Mac's Finder onto a Photoshop CS3 canvas. In older versions, I've been able to easily drag/drop images, but I am perplexed on how to solve this. I've read about having an "Adobe Unit Types" in a ScriptingAdditions folder of Library. I have a file there called, "Adobe Unit Types.osax", so not sure that is an answer.
Any advise is helpful.
My setup:
MacBook Pro
OSX 10.5.6
2GB
Adobe CS3 Extended Suite (Photoshop 10.0.1)
Any advise is helpful.
thx. Craig

I am not sure if this is a feature, since you say it worked on other versions. Has it ever worked with your current setup? If it has, I would suggest resetting your prefs.
If it hasn't, you might want to import using the Smart Object feature. Also, I believe that when I am in Bridge, I can right-click on an image and send it to PS.

Vector Smart Object fades when pasted into Photoshop

I have a group of vector objects in Illustrator. I am trying to copy and paste them into Photoshop just as I have done many times before. This time, however, everytime I paste them, regardless of if I choose Smart Object of Pixels, the image appears on the Photoshop document but then fades to what appears to be less than 40% opacity as soon as I hit return or deselect. The opacity still remains 100% and there aren't any other layers on top of the new one.
Does anyone know why this may be happening? I'm running both Illustrator CS5 and Photoshop CS5.

The left side is Illustrator, the right is what happens in Photoshop.

Why was drag and drop to PHOTOSHOP eliminated/

With IPhoto it was possible to drag and drop to Adobe PHOTOSHOP. Now you cannot. When you export you lose the DPI of the camera and it goes to 72 DPI. This *****. Can it be fixed?

In Illustrator go File>Place and navigate to the image you want.

Smart Object import from Illustrator to Photoshop ( CS5 )

Hello !
Here's the thing:
I have an icon in Illustrator and I'm designing a website in Photoshop so I copy and paste that icon as a Smart Object in Photoshop and everything is perfect but when I resize that Smart Object is not perfect anymore.
*The document is 200 %
-The first icon is the original file I import from Illustrator and It's 100%
-I resize the second icon to 70%
Now look at those gray light lines around the second icon. Why is that happening ? How can I fix it ?
Thanks !
PS: Sorry for my English I just speak a little bit.

Hi, again, Sunniess.
Now look at those gray light lines around the second icon. Why is that happening ? How can I fix it ?
You may be sorry you asked. I didn't have time to bore you with the answer to that earlier.
The gray lines are being generated in Ps, so this should be of interest to anyone who works with small images in Ps.
When you export from Illy using the clipboard, Illy rounds to the nearest whole pixel. A rounded rectangle is created in Illy measuring 73x30 pixels. If you scale the rectangle 70% in Illy, the new rectangle measures 51.1 x 21 pixels. But it pastes into Ps as 51x21 pixels.
If you import the 73x30 pixel image into Ps and scale 70% , instead of 51x21 pixels, you will get either 52x21, 53x21, 52x23 or 53x23 pixels, depending on where the Reference point locator (highlighted below) is set in the Transform Toolbar. The gray lines are the extra pixels.
Why the extra pixels? The extra pixels are a form of dithering. When you scale the 73x30 imported image 70% in Ps, you get 51.1 x 21 pixels, same as in Illy. But Ps doesn't round to the nearest pixel. It creates fractional pixels. In the screenshot below, the rectangle is rendered 52x21. The lines at top and bottom are sharp because the pixel height is a whole integer, 21. But the width is 51.1. There's a decimal fraction. The gray vertical bar at right is how Ps represents fractional pixels. The .1 of 51.1. Ps can't actually make .1 of a pixel black. So instead it makes 1 pixel .1 black by assigning 10% opacity.
If the Reference point locater is set as below, you get a different result. Now the rectangle renders at 53x23 pixels. You now have gray rows of pixels at top and bottom, as well as both sides. The height is still really 21 pixels, but since it is transforming from the center and it's an odd number, Ps splits a pixel, assigning .5 black pixels at the top, and .5 black pixels at the bottom, which it represents with 2 rows of pixels at 50% opacity. Similar thing with the ends, except they are lower opacity because they represent smaller fractions of a pixel. This pretty much reproduces what your icon looks like.
Below is a closeup of the above rectangle over a blue background. The rows of pixels aren't actually gray. They are semi transparent black.
The point is, how the Reference point locator is set can have unexpected influence on the results, particularly when downsizing small images. And will be most noticable on straight vertical or horizontal edges.
As if that weren't enough, there are options in your General Preferences that affect the results of resizing images.
I copied and pasted your icon into Ps, then scaled it 70% at two different settings.
The top is Bicubic, the botttom is Nearest Neighbor.
A significant difference. And this interacts with the Transform Locator setting to further confuse the issue. But if you resize in Illy you avoid all this.
If you resize in Ps, it's good to be aware of this stuff. This all happens in Ps. It really has nothing to do with Illy. If you must scale in Ps and get noticable rows of fractional pixels, it's easy enough to select the rows and just delete them. Or fill them. That's essentially what Illy does when it copies to the clipboard.
Your English is fine. I hope mine makes as much sense.
Peace,
Lee

Drag and drop a photoshop layer into TextInput

I've been able to complete a drag and drog from a file to a TextInput in my CS Extension but what I really want to do is drag and drop a layer into a textinput or any other control so I can pick up what layer it is and apply actions on it.
Anyone got ideas of how I could achieve this in Extension Builder?

What app is this?

Pixelated Smart Object import from Illustrator to Photoshop ( CS3 )

For years everything was glorious when I imported graphics from Illustrator to Photoshop.... And now all of a sudden, every time I import/paste into photoshop it is horribly pixelated. The only way I can solve this problem is to save in illustrator as an eps and then open the document in photoshop (boo).
Have I changed some preference on accident?
Thanks for your time with this, and if this has already been answered I apologize I searched prior to posting,
sg

Hello,
Same problem - what do you mean when you say 'trashing' does anyone have the correct settings for AI & PS on this please
Many thanks
elles.x

Why does the quality reduce when dragging and dropping from photoshop?

Hi there
Basically ive got a layout in keynote and when i drag layers into keynote, they appear on the keynote layout however the quality goes all crappy....is there no way of sorting this out, or is it just how it works? when doing layouts do most people save the individual layers out as png files and then import individually into keynote and align them with the original layout? i do this currently but it is slightly time consuming.
thanks alot in advance
dan

Hi there
Basically ive got a layout in keynote and when i drag layers into keynote, they appear on the keynote layout however the quality goes all crappy....is there no way of sorting this out, or is it just how it works? when doing layouts do most people save the individual layers out as png files and then import individually into keynote and align them with the original layout? i do this currently but it is slightly time consuming.
thanks alot in advance
dan

Open as Smart Object as Layers in Photoshop?

I apologize if this has been addressed already, but I am looking for a way to open Smart Objects as LAYERS. I do compositing work and would like to retain as much information as possible by using Smart Objects PRIOR to going into Photoshop. My current workflow is to highlight the photos in Lightroom CC > Open as Smart Object in Photoshop CC > Manually Drag layers from each open file in Photoshop to main PSD.
Edit - Opening as Layers in Photoshop then applying the Camera Raw Filter is not a good work around, information is lost.

davepinminn wrote:
I must still be doing something wrong here..............
You have the wrong expectation—namely because you don't grasp the concept. A smart object is not a linked file. It's a new file all on its own (in PSB format) with no connection to the original file at all.
davepinminn wrote:
…I can open my raw (.dng) into Photoshop as a smart object. And in PS, I can open the smart object into ACR. Works fine. And I can change stuff. For example, if I change the exposure from -.25 to +.20, it changes perfectly in PS, as I'd expect. But, I'm still not getting the changes back to the original raw (.dng) file…
There is no reason why the changes made to a Smart Object oject should be refleftef to a totally unrelated file.
davepinminn wrote:
…Do I need to do something different to get the changes back to the original file…
Yes. you have to go back to that original file and apply the changes directly to it. In a previous post, Jeff Schewe told you of a shortcut to achieve that:
Jeff Schewe wrote:
When you are in the Camera Raw SO with ACR open, go to the main flyout menu and select Export settings to XMP. This will write the new image settings from the SO to the xmp metadata. Then in Lightroom, select Read metadata from file in the main Metadata menu. That will bring in all the settings of the raw SO back into Lightroom. So, while not automatic, it's not as bad as writing down the settings and entering them by hand.

Multiple Smart Objects into existing photoshop file

I need to somehow get bridge to---
Import multiple files into an existing photoshop file (with a predetermined size ) as smart object layers in photoshop.
The options that Bridge currently offers falls short in 2 area
Load Files into Photoshop Layers-- does not import smart objects and creates a new photoshop file that ends up being as large as the largest imported file
Place into Photoshop--only lets you do one at a time
I need "Place into Photoshop" with multiple files
Is there a way to do this?
Thanks!!

I don't think it is possible, but to be sure drop this question also in the
PS forum if you already have not done so.
Is there a way to do this?
Thanks!!

Photoshop CS4 smart object template just overwrote a raw file - HELP

So. I've been working in Photoshop extensively for about 6 years now and I am well aware that nothing we do in Photoshop or Lightroom is supposed to overwrite a raw file. I'm not talking about changing it to something a little lighter or darker, I'm talking about replacing a picture of one baseball player with another one - and the original? Gone.
Here's what happened: I have a poster template that contains several layers, 7 of which are smart objects. I change the pictures in the template by right-clicking the smart object layer and selecting "replace smart object," browsing to the new image, selecting, and here is what SHOULD happen: the target picture opens in Adobe camera raw, I make some small edits, click done or okay or something similar, and that new image has replaced the old one in the template. What DID happen was this: I followed the procedure above and selected my target raw file, the picture that was already in the template (the one I was trying to replace with my target file) opened in Adobe camera raw. I thought - Hey, that's wierd! Closed the ACR dialog and tried again. Same thing happened. I opened lightroom and saw - to my HORROR - that the target file had been changed to the same image that was in the template.
If it clarifies: pictures of player A (who played in 2009) is in all of the smart object layers in my template. I want to make that poster be of player B (who played in 2012) so I begin replacing all the smart objects. When I get to the 3rd image in the poster template, Photoshop overwrites my raw file of player B with the smart object photo of Player A. There were no photos of player A on the network drive that the picture of Player B was on. But there's one now. My raw file shows that it was modified about 10 minutes ago.
We tried undoing in Photoshop. That did nothing. We tried deleting the xmp file. That did nothing. We removed it from the lightroom catalog and reimported it. It is now a picture of Player A from 2009 and my picture of Player B from 2012 is just gone.
Anybody have any idea what this could be and how we could avoid it in the future?
Best,
Jamey

mojoimagery wrote:
Now - JJ - when you say "overlay files" - what do you mean? Because that feels like a good description for what happened.
We performed no save operation at any point during the sequence of events that ended with the image in one raw file being replaced by the image in the smart object.
As I wrote Smart Object layers embedded object is a copy of the original and if you replace it you replace it with a copy of some other object. Embedded object are copies and independent from the original. If after creating a smart Object layer who's embedded object is a copy of a raw file and its conversion settings. You change the original RAW files RAW conversion settings the smart object layer raw conversion setting are not changes for its a copy with independent raw conversion settings. When you replace a smart object layers contents you will replace the embedded object and you should replace it with an object the has the same pixel size and orientation. Because there is an associated transform for the object in the layer that is not replaced. The replacement is also a copy. If the original smart object was created using File Open where you choose a RAW file ACR would open with the RAW files current conversion settings. In ACR you can changes the setting then hold down the shift key to change the open image button to an Open Object button. Using that button ACR will open a smart object layer in Photoshop the contents of the embedded object is a copy of the RAW file and the current ACR settings. No File is written Photoshop is not a File Editor its a Document editor that has many data structures for different layer types. When you replace the contents of a smart object you will be put into a "Place" file selection dialog if you choose a raw file it should have the same orientation as the image being replaced because of the associated transform. When you choose a RAW file ACR will open and you can change the conversion settings however there will be no Open Image button instead there will be an OK button. There is also a save image button and you can save a RAW file that is a DNG file not a CR2 file. Like the DNG converter. If you click the OK button the embedded object in the smart object layer will be replaced with a copy of the selected RAW file and the current ACR settings. Again there is no file written Photoshop is not a File editor just the embedded smart object data is replaced in Photoshop smart object layer's data structure.
I do not think the use of smart objects in you process caused what you are experiencing and because it only happens once an a while I feel its more likely caused by some human error made during the processing in those cases. I would look elsewhere for what causing the overlay. In the place file selection dialog it is possible to rename files perhaps even by accident. Programs like LR and Bridge can rename and copy files perhaps overlay other files.

Photoshop CS6 - Pasting Smart Objects from InDesign CS6 look awful

Since upgrading from CS5 I'm having a huge problem using Smart Objects.
What:
Smart Objects pasted from InDesign into Photoshop are pixelated and corny beyond belief. Originating material placed in InDesign is hi-res (e.g. 600ppi) but when pasted in PS it looks crappy.
How:
Selecting an image in InDesign and pasting it in PS in a 72ppi file.
Typically I need to copy elements from previous art in ID and re-compose and use for web.
Why:
Can't seem to fix it. Have tried with Anti-Aliasing both on and off to no avail. None of the Image Interpolation settings affect this either.
Only solution is to scale the placed Smart Object to something like 400% where it suddenly looks nice again, rasterize and then scale it back down.
Theory:
Smart Object scaling is flawed in PS CS6.
Note: All scaled images in InDesign already look gritty and awful. Even with Display Performance: High Quality set (using default settings). Seems to me like CS6 scaling is b a d.
Anyone else seeing this?
Thanks
Image 1: Smart Object rasterized at same size as placed. (ouch. awful.)
Image 2: Smart Object Scaled to 400%, rasterized and then scaled back to original size (yum yum, like it used to be without up-rasterize-down-scaling)

That does not resolve the anti-aliasing issue in CS6 - it still looks rather bad.
The anti-aliasing sampling method applied to smart vector objects is just extremely bad looking. And it is not merely an issue in Photoshop: exporting artwork from Illustrator at web/screen resolution using the web export is absolutely abysmal looking (not other word applies here, unfortunately).
I explain more about this issue here: http://forums.adobe.com/message/6002543#6002543
The best option is to blow up the artwork, rasterize, and then scale down with bicubic or bicubic automatic, depending. But even then you will not achieve the same quality that can be attained with other tools that, for example, support catmul rom and mitchellnetravali for downsampling.
Anyway, Adobe applications are very weak when it comes to proper downsampling and file size optimization for web and screen graphics. You're better off looking someplace else.

Place smart object into pre-existing Photoshop file

There's not a way to do this in Bridge, but maybe there is a way to script it?
I've never used a Bridge Script but would love to how to implement them, if I can get a script to do this...
I need to Import multiple files into an existing photoshop file (with a predetermined size ) as smart object layers in photoshop.
The options that Bridge currently offers falls short in 2 area
Load Files into Photoshop Layers-- does not import smart objects and creates a new photoshop file that ends up being as large as the largest imported file
Place into Photoshop--only lets you do one at a time
I need "Place into Photoshop" with multiple files
Is there a way to do this?
Thanks!!

Please try this version, I've tested this in CS4...
#target bridge
if( BridgeTalk.appName == "bridge" ) {
PlaceFiles = new MenuElement("command", "Place Files In Photoshop",
                               "at the end of Thumbnail");
PlaceFiles.onSelect = function () {
    placeFilesInPhotoshop();
function placeFilesInPhotoshop(){
    var sels = app.document.selections;
    for (i = 0; i < sels.length; i++) {
var t = new Thumbnail(sels[i]);
      sendPicToPhotoshop(sels[i].path);
function sendPicToPhotoshop(fileName) {
    function _placeFile(fileName) {
      if (!app.documents.length) return;
      var id35 = charIDToTypeID( 'Plc ' ) ;
      var desc8 = new ActionDescriptor();
      var id36 = charIDToTypeID( 'null' );
      desc8.putPath( id36, new File(fileName));
      var id37 = charIDToTypeID( 'FTcs' );
      var id38 = charIDToTypeID( 'QCSt' );
      var id39 = charIDToTypeID( 'Qcsa' );
      desc8.putEnumerated( id37, id38, id39 );
      var id40 = charIDToTypeID( 'Ofst' );
      var desc9 = new ActionDescriptor();
      var id41 = charIDToTypeID( 'Hrzn' );
      var id42 = charIDToTypeID( '#Pxl' );
      desc9.putUnitDouble( id41, id42, 0.000000 );
      var id43 = charIDToTypeID( 'Vrtc' );
      var id44 = charIDToTypeID( '#Pxl' );
      desc9.putUnitDouble( id43, id44, 0.000000 );
      var id45 = charIDToTypeID( 'Ofst' );
      desc8.putObject( id40, id45, desc9 );
      executeAction( id35, desc8, DialogModes.NO );
    var bt = new BridgeTalk;
    bt.target = "photoshop";
    var myScript = ("var _ftn = " + _placeFile.toSource() + "; _ftn(" +
                    fileName.toSource() +");");
    bt.body = myScript;
    bt.send();

Smart Object drag-n-drop displacement. Photoshop CC

Similar Messages

Maybe you are looking for