Smart object masks problem

Let's see if I can explain the problem I'm having...
1. I create a blank 12x12 320 dpi image.
2. I choose place from the file menu and choose an image to place on the 12x12 document as a smart object
3. I make a selection on the smart object (rectangle for example)
4. Press the mask button under the layers on the layers palette to apply the rectangular mask for the smart object.
5. Now select the smart object and try and re-size it with the layer handles.
The mask for the smart object gets all messed up. It's like it puts the mask at the bottom right of the smart object now. I can un-link the mask and object and move it back, but it seems it is behaving incorrectly.
Can anyone verify this?
Matt

The problem is your mask is not linked to the smart object, and therefore doesn't transform with it. The workaround in CS3 was to drop the smart object in a group and apply the mask to the group instead. I'm assuming by your post this is still necessary in CS4. You might try clicking between the mask and the smart object (in the layers panel) first and see if a link (chain) icon appears...

Similar Messages

  • Smart Object Masks resizing problems

    I have encountered a problem with the masks I use on smart object layers resizing so that they only extend to the bounds of the image they are masking in photoshop cc. The problem occurring is that many times the mask is 1px too small, and leaves a hairline border of the masked image visible. This seems to be happening when the smart object is saved/updated or resized. One work around is placing this smart object in a group and then masking that group, but this is not an ideal way to organize my files and is not always applicable. I am trying to see if leaving the mask unlinked stops this behavior, however this is still not an ideal fix. Is anyone else experiencing this or knows of a preferences setting/solution etc. to fix this issue?  Thanks.

    Can you post a file that exhibits the behavior? (Dropbox or another sharing site)

  • Ps CS6 Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask

    Ps CS6
    OSX 10.6.8
    Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
    I mean a Transform, including Free Transform, as found in the Edit menu.  A simple move by the Move Tool is OK.
    A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.
    However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
    In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.

    R_Kelly wrote:
    I don't think that's a bug since the implementation seems to be purposely done.
    It's been that way since photoshop cs3.
    If its been like that since CS3 then I think it's a bug which remains because nobody (or not enough people) has complained before.

  • Smart Objects Problem : Templates : CS3 : WIN

    Hello,
    I am trying to create some reusable templates in Photoshop CS3 using Smart
    Objects. Basically I want to layout the page with some place-holder photos
    that are smart objects and then when I need to create a page simply load the
    template PSD, right-click on the smart object layer in the layers palette
    and choose replace contents. This seems to be possible and even works
    sometimes. However, a lot of times the size of the smart object images
    change.
    For example I could set a smart object place-holder image to be 4 x 6 -
    inches at 300 dpi, replace the image with another image and the size will
    then jump to some odd size. I even had it once go to 2 x 10 inches. I
    thought the whole point of smart objects was that I could replace the
    contents and it would be sized, etc. the same. Well that is one point of
    smart objects.
    Is there a bug? Could the fact that I have layer styles and rotation and
    resize transformations applied to the smart object be creating the problem?
    Any way around this?
    This is Photoshop CS3, Windows Vista, Quad Core Processor, 4GB of RAM, 8 TB
    of hard drive space.

    Are you perhaps changing the layer order, grouping or some clipping masks? As usual I'm not working with these features a lot and probably shouldn't advise ;-), but I could imagine that this would affect rasterization and how PS may want to update info that no longer is in the place where it expects... I'd also check the "Temp" directory (Documents and Settings\Rachael\Local Settings\Temp). Perhaps it's simply full and the programs are not able to update the temporary files.
    Mylenium

  • Smart object with a layer mask.

    I'm using CS4 and I have run into a problem. When ever I create a smart object, photoshop applies a layer mask where is never did before. I can't figure out how to revert photoshop drawing the smart object without the layer mask.
    It's driving me insane. I can't do anything and when I remove the layer mask, the smart object fills the whole canvas. Not happy!

  • Why doesnt the smart filter mask move with the smart object?

    OMG Why doesnt the smart filter mask move with the smart object?  Yikes Way PITA

    If you look at the other tread about transform Again and smart Object layers you will find I found there seems to be two flavors of Transform and some bazar behaviors when it come to smart object layers. http://forums.adobe.com/message/4611500#4611500
    However for this problem here I think I can not show you how to do it.
    First target the smart filters Mask.  In fact so you can see what is happening Alt+Click on it so Photoshop displays the mask rather then the the composit image.  Then  use Ctrl+T free transform then just for a test hold down the Ctrl and the Alt keys and drag in a cornor to constrain and srink the Mask thee release the keys and press enter to commit the transform.
    Next target the smart object layer then use the short cut Ctrl+Shift+T (Transform Again) on a PC the smart object layer will be transformed to match the filter mask transform.

  • Open as smart object problems

    Hello,
    Im having some problems with Lightroom 4 when using "Edit In" -> "Open As Smart Object in photoshop..."
    Image open fine in CS6, i can make my edits & save. But when i close the image, an dialog box pops up with the following;
    Error 2: photoshop is undefined.
    Line: 1
    ->  photoshop.notifyLightroomDocClosed ('lightroom-2.0', '49071FF0-A8C4-4F2F-B0BB-B28B76F494E6', '');
    The image is saved to the correct place, link to lightroom is not. Need to manully syncronize the folder to get the image in the catalog.
    Running Lightroom 4.4, CS6 (13.0.4) on OS X (10.8.3)
    Anyone know whats wrong?

    This hack: http://kb2.adobe.com/cps/401/kb401629.html?
    Is Edit in Photoshop CS5 enabled?

  • Problems launching Bridge from Photoshop and opening files as smart objects in Photoshop from Lightr

    I am running Photoshop CC (up to date as of today) and Lightroom 5.2.  I  am hitting 2 major problems.  In Photoshop if I select File/Browse in Bridge I get the following message
    "Could not complete the Browse in Bridge command because Photoshop was unable to find the JavaScript plug-in".
    However if I simply launch Bridge as an application it works ok (now I have reset the default application for all the appropriate file extentions to Photoshop CC rather than Photoshop in Bridge preferences) and opens the file in Camera Raw 8.2 in Photoshop when a Raw file is double clicked.
    The second problem is associated with opening raw files in Lightroom 5.2, editing and then trying to "photo/edit in/Open as smart object in Photoshop" .  In this case Photoshop opens with a blank screen and nothing happens  Eventually about a minute later this message appears in Lightroom 5.2
    "The file could not be edited because Adobe Photoshop CC could not be launched."
    Rather strange message as the first thing that happened was that Photoshop CC opened!!
    Same thing happens if try "photo/Edit in/Edit in Adobe Photoshop CC" except that having shut down photoshop I see a message from Lightroom 5.2 saying
    Lightoom was unable to prepare the selected file at ..... for editing.  It will not be opened.
    When I click the OK button on this message low and behold the tif version of the RAW file opens in Photoshop. ready for futher editing with all the Lightroom edits applied.
    Can anyone help me in sorting out this problem please
    Operating system is Windows 8 64 bit and I am running the 64 bit Adobe applications.

    Solved the problems by uninstalling Bridge and Photoshop then going into Creative Cloud App and re-installing both.

  • Smart object problems, from AI to PS = pixelated

    Hello and greetings,
    I am new here and looking forward to getting some help, and hopefully giving advice. How is everyone today?
    Ok my problem is:
    I am designing a website is Illustrator and finalizing it in photoshop (as this is the file the web developer asked for) I have the main design done, buttons and panels etc -
    so I copy the object I want from Ai to PS as a smart object. The web doc in PS is set to 72dpi, which is fine - it looks 'clean' at 100%. However when I do this process on the works PC the result is fine and good eg - looks 'clean' at 100% -
    I took my work home to finish on my Mac and when I did the same process it was really pixelated beyond beleif! This is not good! NOT GOOD!! I have compaired one of the buttons from the doc at work to one of the buttons on the same doc dome on my Mac and the difference is terrible.
    HELP - Are there some settings I am over looking? I have checked the 'clipboard' settings in Illustrator to recomended to what I could find on the web and nothing has changed? Do I have to close the program for the preferences to work? Please please help
    Many thanks Elles.x x
    ps: I am running CS4 at work on a PC and at home CS3 Mac

    Thanks Ozzwoman for your advice , it seems to be the thing to do as I have read on here to sort this issue - shall I be doing the same for Illustrator? Or do you know the settings for AI clipboard prefs?
    Nice pooch by the way, does he have a name?
    elles.x x
    ps: will try 'Operation deleting prefs' when I get home, bout an hour or so, I will let you know how is goes!

  • Copy in illustrator, paste in photoshop as smart object problem

    Hello. I am posting this here hoping that this message might be seen by someone more experienced who knows the answer. I have already tried to find a solution on my own, but to no avail, and I already lost a whole day just  with this problem.
    I'm trying to build an example website, in anticipation for a real one that I want to build later on. I've done the wireframing and design (some of it) in illustrator, and now I want to copy to photoshop what I did in illustrator. I need to copy it as a smart object. The problem is that when I copy to photoshop, even though I choose the same dimensions, the file is not the same size. I have inserted some images to try to explain this more clear.
    These are some settings in illustrator.
    These are the dimensions in illustrator.
    I select the whole content from illustrator, copy it
    And after that I go to photoshop. I choose to create a new file
    Even though when I created a new file in photoshop I selected the same dimensions that were in illustrator (960 px 1810px), the copied object does not match the canvas when I press enter.
    I've searched online for people that had the same problem and I found something somewhat similar, but not helpful. The problem for them was that the anti-alias was not selected. However, as can be seen in the images, in my case the anti-alias is selected. The difference I noticed is that for them the W and H are both directly 100% when the object is pasted into photoshop, but for me this never happens, it is always something different. In the images here it is w 99.99% H 99.94%, and I created another layout before this that had even worse dimensions, something like W 97.68%  H 98%. I tried to fix this by putting manually 100% for each before I press enter, I even selected the "maintain aspect ration" icon (situated between W and H) but after that the image gets distorted.
    I should also mention that I created different other smart objects with these files and they have the same problem - I selected the header for example, made it a smart object, and every time they are introduced to photoshop they are not W 100% H 100%  but are 9X % 9X% or something.
    I also tried, when creating a new document in photoshop, to put instead of 72pixels/inch  - 300pixels/inch and its the same problem..
    I also looked at the illustrator file so that there are no strokes on the edges of the document.
    So, please, if there is someone who know how to fix this, to paste it so that I will have the same dimensions (W 100% H 100% automatically) so that the documents will match how it is normal, I would really apreciate the help. If there are any other details and setting one might need, I will look for them and mention them after that. Thank you!

    Use
    file >> export > psd instead
    Your resizing problem is coming from what is in your clipboard is not 960 x 1810, but larger (960.078 x 1810.048 as seen in your 3rd screenshot), and Photoshop is resizing trying to fit.
    To fix this yourself, make a new document, your clipboard size will automaticallly be used if you make a new .psd doucment, then paste, than drag over to your 960 x 1810 .psd document and reposition.

  • Smart Objects...changing canvas size problem

    When changing the canvas size of a smart object, the layer on the original document will distort visually since it doesn't update the size of the smart object.
    Is there a solution to this, or an easy way to quickly update every instance of the smart object on the original doc?
    To clarify: I know that you can change the dimensions of the smart object on the original doc and it'll fix it, my question is if there's a way to automatically have that happen and have the original doc smart objects respect your canvas size changes on the smart object doc.
    Reproduce:
    1) Draw a circle
    2) Turn it into a smart object
    3) Go into the smart object, change the canvas size by increasing the height of the canvas. The smart object should now have a circle with blank space above/below it.
    4) Save the smart object
    5) The circle on the original document will now be squished.
    I'm using Photoshop CS5

    xg3 wrote:
    When changing the canvas size of a smart object, the layer on the original document will distort visually since it doesn't update the size of the smart object.
    When you change the canvas size of a document the only layer that will change is a backgroung layer for it does not support transparency so its pixels will be changed.  However a background layer should not distort it may be cropped  and have canvas added in which case the color of the empty canvas can be set in the canvas size dialog.  All other layer including Smart Object layer should not chang at all.  Layer positioning in relationship to the canvas  and the new canvas size is set during the canvas size change.  Layers can be any size and have any aspect ratio. Their sizes can be smaller, the same or larger then the canvas size. Even layer that can fit  within a documents canvas size may be positioned so that all, some or none of the layer is over the documents canvas.
    I do not know what you mean when you write the original document chages. A smart object layer has an embedded copy of an object. The original document is not touched. You can open the smart object layer embedded object in  Photoshop by double clicking on the smart object icon in the layers palette smart object layer and change it size. And distort it f you wish. When you use Photoshop save. Photoshop will change the enbedded object in the smart object layer. You can also leave the embedded smaro object as is and change the smart object layer size and distort it using transform on the smart object layer itsself.
    I think what you did was to open the smart object in photoshop change its canvas saze then save it. The updated smart object is realy round but you dont see that it is becaue it is being transformec ti fit the original documents canvas. If you do a Canvas size on the codument you will see the original docyment canvas size is not change and thet your now squaching a now changed taller object into a shorter canvas.  With each Smart Obkect layer there is as associated transform.
    No I was wrong I just tried that and it looks like the transform was not the problem as yo can see I dir a Ctrl+T so you can see the size of the smart object layer is now biger then the original document and is positioned centered canvas is still 300x300 white area in image

  • Opening a Photoshop smart object file in Illustrator looks horrible (antialiasing problem)

    Hello all,
    This problem is killing me and I really wish I had done this logo in Illustrator, but I didn't now I have to suffer. Help!
    I am doing a freeland job for a friend so I am not all that and a bag of chips with Illustrator. I am better at Photoshop but I need the vector, so I did my logo in photoshop and created a smart object out of it. I saved a version as a tiff and one as a jpg. My friend is creating his own leaflet in Word and the logo works beautifully there. I am creating a flyer for him in Illustrator and the logo is aliased in Photoshop but when I put it in Illustrator it looks antialiased and bad. He also has a little cheapy yahoo sitebuilder website until I create a website for him and the same logo(jpg) will not open in the yahoo site for him. I work and go to school so I don't have the time to recreated the logo in illustrator. It looks really good the way it is until I put it in Illustrator. Any ideas? please?
    Thanks to anyone that answers this question, and kudos for taking time out of your busy day to calm my angst( or add to it)please don't add to it...

    Hello Noel and c,
    I created the logo in photoshop
    ( to make vector in photoshop, I need the scalability, I made the logo a smart object)
    I then saved a copy as a jpg(for web) and a tif for print. I am creating a flyer in Illustrator, so I have to bring the logo into illustrator, when I do it looks like an aliasing problem. I had that aliasing problem in photoshop, but I still had text.... so I could antialias the text. In Illustrator the logo is just a tif, or jpg(I have tried both) It is not a text, but an image and it looks antialiased. In some programs the logo looks good, in some programs the logo looks bad.  The only layer I have in the good photoshop file that I saved  as a jpg, and as a tif is one layer that has text and the logo on it- this is a smart object. I have additional work files that have multiple layers, but I do not want multiple layers on my final print, web file. When I open up my laptop, I will save a screenshot.
    Thanks so much

  • Linking smart objects with it's layer mask

    ther must be a way to link smart objects with it's layer mask without having to rasterize....isn't there?

    You're pre-CS4 right?
    1) Upgrade to CS4
    2) Put SO in a group, link mask to group
    3) ...
    4) Profit!

  • Problem when extracting Smart Objects

    I am having a problem when extracting Smart Objects.
    I work for a small pre-press company. We are working on several computers using one Job Server. Some of these computers have different versions of OS.
    For one of our clients the company uses Smart Objects as a precaution for moire issues. The child file stays a certain size, while the parent file is sized down for print. Our client has started to request the larger Child size image for their use. For the volume of images requested, I have made an action out of Photoshop to open the smart object and save out a flat tif of the larger child file image. Here is the problem...
    At times the smart objects child file does not retain the name of the smart object layer as its being extracted. What could be causing the lost connection between the parent file name to the child file name, and is there a way to prevent it in the future?
    Thanks for your help:)
    DVan

    Hello,
    I have noticed that. The true problem is that the child files name starts out as the parent layer name, but then somewhere down the line it turns wonkie, starting to be named things like 12.psd etc. Please see attached. Your can't re-save the name of the child file either because all that does is save out a named temp file that does not get linked back to the parent file....so what is making the name change?

  • • Link the mask to a "smart object"

    Hello -
    I searched already for a while now, and I was wondering if there is a way to link a smart object and its mask (directly)?
    Not via a folder, or some others trick/tip, but simply directly.
    Thank you, have a nice day…
    - Dimitri

    Hi guys -
    Thanks anyways for your replies…
    - Dimitri      http://www.thebend.be/notlookingforsuchpicturesrightnow/

Maybe you are looking for