Smart Phone Apps

Is anyone succesfully developing code for smart phones? I have a fairly large application that I've been using on PPC03 and WM05 I'd like to use on a SP with WM05 and WM06.
Thanks!

Something you could try is to use the 'Connectivity>>PDA Button Input VIs' to read the button info of the phone and programmatically decide if a button has been pressed. This would allow you to map functions to whatever button you like.
Message Edited by DiscoBob on 02-07-2008 01:33 PM
Attachments:
Button Info VIs.PNG ‏13 KB

Similar Messages

Pdf not listed in smart phone app

I am having adobe reader app in my smart phone. It is not listing some of the pdf files from the SD card even though i had chosen all pdfs in document view pane

For both 'Folder View' as well as 'All PDFs' view, all non hidden PDF files on the external SD Card as well as internal storage are listed by Adobe Reader. Are these files on a specific location(like a certain folder) on your SD Card? Are you able to access these files from outside Reader(i.e. File Manager or some other application)? If yes, when you open them, do you see their entry in Recents?
Thanks,
Adobe Reader Team

S4 mini is my first smart phone. How do I delete useless built in apps?

S4 mini is my first smart phone. How do I delete useless built in apps?

You can disable them, but you can't delete them.

How to I start smart dialing in the phone app

Hello.
I have set my company number in the smart dialing menu. But i can dial a "x" in the phone app. Which letter, number or sign I have to use as a prefix to start smart dialling?
My configuration:
Device: Blackberry Q5
OS: 10.2.1.2102
Thanks a lot for your assistence.
Best regards
Ralph

meierra wrote:
Hello.
I have set my company number in the smart dialing menu. But i can dial a "x" in the phone app. Which letter, number or sign I have to use as a prefix to start smart dialling?
Please explain... "to start smart dialing"?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

"Haze" filter on new Photoshop express app for smart phone not working

"haze" filter option on new photoshop express app for smart phone is not working !

Please install the new update for PS Express. It has the filter working

I have a Droid Bionice, my 1st Smart phone. An install kept coming up ,I did it and everything has changed. I don't knpw what to do...Help...smart phone...dumb person

I bought a Droid Bionic Smart Phone. I loved it so very much. When I was on it and install kept coming up, over & over. I Don't know what it was called but I did look and it didn't say Verizon anywhere but I assumed w/my Lookout security app it wouldn't let anything bad in. But I downloaded it now my icons are different and on my manage apps I use to have only maybe 20 settings now I have a bunch. and the lil icon looks like a blue square app w/the lil cog looking symbol in it. Everytime I try to delete one thinking it will go back to the way it was it says it will cause problems w/all other settings. And also after the icom it says com.motorola.android.deep it says that on about 20 or 25 after the icon.It won't let me disable any of them.
The very 1st icon on my Apps on ,y Apps setting is the blue symbol that looks like a cog, and it has 32.00KB if I try to disable that because I figure it's the mother of all of them it says in a pop up...Disable built -in app-----If you disable a built in app, other apps may misbehave.? That doesn't sound very professional to me.One even says key chain for the app. I don't know what to do. I did look at it and I assumed when it popped up it was a legit thing. I didnt know you had to beware of something that was a pop up on the page.
I don't know if it's a Gingerbread or Ice Cream thing, I just know when I go to my settings it has overtaken 3/4th of my apps. And on most of them it doesny even offer me the chance or choice to disable it. Please somebody help me. I am so new to this. I loved my phone before now it's taken Over everything. I am scared if I run some of the things I see it says on my settings app it runs my phone,it says for instance:
Permission
This App can access the following on your phone
*YOUR LOCATION
coarse (network-based) location,fine (GPS) location
*SYSTEM TOOLS
modify global system settings
STORAGE
SYNC SERVICE
I dont know what any of this is and it says if I stop of close any of it , it will cause the app to fail.
How can I tell what I have downloaded as far as this whole montrosity....SO I can study it and read up what to do. I do't want to lodr my pictures or my pictures on my gallery/ I am afraid I have really screwed it up good!!!!!!!!!!!!!!!
I THANK ANYBODY THAT CAN HELP ME IN ADVANCE....

Follow this link for the Bionic ICS user guide; if you have issues/questions, you may want to do a search on this forum as there are already several threads/remedies. If a search doesn't answer your question, submit a post.
https://community.verizonwireless.com/message/893011#893011

Can I transfer Tungsten E2 data to a new Palm Pre 2 smart phone?

I'm looking to upgrade from a Palm Tungsten E2 + an old cell phone to one device - a new smart phone. I have Verizon, and they offer the Palm Pre 2. The question is whether I will be able to transfer my address book and calendar (and a few other items) from my Tungsten E2 onto the new phone. I also have a 3rd party cookbook and a shopping list application that I would love to transfer too. Not holding out much hope for those though.
If anybody has any reviews of the Palm Pre 2 phone I'd love to hear those too!
Thanks!
Post relates to: Tungsten E2

No, I don't use Outlook to synch. I've always synched with the Palm desktop s/w. I've considered synching to Outlook, but I wasn't sure if my E2 could synch the memos and to do apps as well. Thanks. My Palm desktop s/w ver is 4.1.4.
Post relates to: Tungsten E2

Can't access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser no

When I try to access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser not supported at this time". This happened to me while using my IPhone 5, a friend that uses an IPhone 6, and another friend that uses a Samsung Galaxy S5. I just need for my employees to be able to access, complete and submit work orders created in formscentral from their phones. I would like to use the data collection feature in formscentral but at this point any suggestions on how to accomplish this are welcomed. Thank you

Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support.

*611 not working on pay-as-you-go, non-smart phone

I have a basic, non-smart phone with the pay-as-you-go plan (pay $100, good for one year, all calls 25 cents a minute.) It is an older Audiovox 8615 CDMA phone that is mobile-web enabled, but it will not handle apps such as MyVerizon. Incoming and outgoing calls work fine. Voicemail works fine. Text works fine. I have had this account for two years and have been very happy with the service.
Problem: I can no longer reach *611 (add money, check balance), or #225 (check balance). I get an "All circuits are busy, please try your call again later" message. I first noticed this several days ago and have reported it and have a repair ticket in, but was wondering if anyone knows what might be going on here? I have internet service and a laptop, so can still use the Verizon Wireless web site to manage my account. However, I believe I should still be able to check my balance or add funds using the phone itself, as I have in the past. Thoughts?

Just got off the phone with Verizon Prepaid customer service rep who called to report on my trouble ticket. The problem is most likely my phone and not the network. She suggested doing a factory reset on the phone and if that does not resolve the problem, I'll need to get a newer phone. Just posting this follow-up in case others have a similar problem.

I have a Nokia N97. I'm looking for a smartphone that is Blue tick approved for reception in rural Australia, which means only Telstra Next G. I would appreciate hearing about any smart phone with gd rural reception, and esp new versions of Android

There are reports of some 3G, or NextG ph's without a blue tick, with as good a reception as the blue ticks. This may include iphone, HTC Desire, and a new to Telstra shop Motorola Defy, that has a blue tick. Telstra staff are not able to give any information re upcoming models of smart phone + good rural reception

I was just having a look back at this post on the Q + A Session and had two thoughts:
- Did Nokia ever address the questions that they deferred by saying they will get back to them later?
- On Q9 the answer from the engineers that it was not an easy task to get Virtual RAM is a cop-out.
They admitted that the c: drive has memory paging and that this make apps run faster and smoother. That implies that apps installed on the mass memory won't run as fast or smoothly. I suspect that a lot of problems with apps are caused by being installed on the mass memory.
So where does that leave N97 owners, Nokia are very unlikely (like a snowballs chance in...) to recall N97s to have more memory fitted, so it goes without saying that Nokia should work on Virtual RAM from the Mass Memory as long as this can be accessed as fast as the c: drive (I don't know if this is even technically possible).
The decision to put such a small c: drive on the N97 was a terrible one, especially when you consider the position of this flagship device in relation to Nokia's move towards service with the Ovi Store and the additional overhead of the homescreen with widgets. Nokia all but acknowledged this by increasing the c: drive in the N97 mini. All I can hope is that Nokia have learnt from the bad publicity that this penny pinching exercise has caused and that whoever made the decision has either lost their job or been demoted to the most junior position in the company.
Frustrated N97 owner.
Nokia N97 (RM-507) v 22
iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

Java Micro Edition and Smart Phone Programming

I have successfully installed Java 2 Micro Edition 8.1 on my computer, and the Micro EditionNnetbeans plugin in.
I am programming with netbeans. In order to create a new project, I need to have the
Java ME Embedded Emulator (Oracle) going on a near-enough virtual mobile phone. I can either
virtualise my phone entirely, or used a real phone plugged in.
-Is there a command line tool that comes with my version of micro edition java
which can generate a JAD file from a completed, manifest-written executable
.Jar file?
-Can someone tell me what to do with the emulator to get it running in either mode,
given that I know all the manufacturing details about my particular Smart Phone?

It depends on how advanced the midlet will be. If standard components are used, the app should work everywhere, otherwise it need to be tested (it need to be tested always). If You need to write a midlet with Location API You first need to find a device that has this api implemented to test your application and the start writing. One importatnt thing, if a device in it's specification has written that it support Location API it doesn't have to mean that it's supported fully, some functions may not be implemented. As You can see here for instance. If You are not familiar with midlets start with a tutorial for beginners and after finishing try using more advanced APIs.

Unable to display Crystal Reports 2008 PDF output on smart phones

Hi Folks,
I'm not sure if this is the proper forum, but here goes. I am just finishing a large ASP.NET web app which makes extensive use of Crystal Reports 2008 and a CrystalReportViewer control. My users routinely e-mail the reports in PDF format. This works great, except now they tell me that when the recipient of the e-mail tries to open the PDF on an iPhone or Blackberry, it will not open. The PDF's open fine on desktop computers.
Here is the code which generates the PDF and attaches it to the e-mail msg.
// export to PDF, then mail that
SmtpClient client = new SmtpClient();
MailAddress from = new MailAddress(ConfigurationManager.AppSettings["ReportMailFrom"].ToString());
MailMessage message = new MailMessage();
message.From = from;
message.SubjectEncoding = System.Text.Encoding.UTF8;
message.Subject = "E-mail BackOffice report: " + strReportName;
MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
Attachment data = new Attachment(memStream, MediaTypeNames.Application.Pdf);
ContentDisposition disposition = data.ContentDisposition;
disposition.CreationDate = DateTime.Now;
disposition.ModificationDate = DateTime.Now;
disposition.FileName = strReportName + ".pdf";
disposition.DispositionType = DispositionTypeNames.Attachment;
message.Attachments.Add(data);
client.Send(message);
Any ideas on what is happening here and how to make these PDF's visible to smart phones?
Thanks.
Dan

Hi Dan,
What happens if you export from Crystal Reports designer?
I just tried if and BlackBerry tells me I am about to download a file that cannot be viewed on the phone. It doesn't say why though.
Going through the Platforms file it doesn't mention smart phones so it would indicate we don't support them in that format.
HTML worked but not pretty. You'll have to see what Blackberry does support. I found this one kbase article from them:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11245&sliceId=SAL_Public&dialogID=206744335&stateId=1%200%20206742756
I'm testing more but I believe this is a blackberry limit and not CR.
Seems they do support it but very limited.
Thank you
Don

Can I have Email Recipients of a PDF Form Complete via Smart Phone Email?

Hello Adobe PDF Forum,
Is it possible to have email recipients of my PDF form complete via their smart phone email platform? If so, could you step me through the 'how to' process in making this possible for my recipients?
Thank you! Have a great afternoon.
Eric

Hi Eric,
Your recipients can use the free Adobe Reader mobile app for iOS or Android to fill out PDF forms via their smart phones. They can download the Reader mobile app from Features | Adobe Reader mobile app. Then, when they receive an email from you with your form attached, they can open it directly from the email client into the Reader mobile app and fill it out. Easy!
Please let us know if you have additional questions.
Best,
Sara

Video quality difficulties with Vimeo and Youtube sites and with smart phone

Ever since the Vimeo and Youtube sites have changed, it has been pretty difficult to get the video quality I had before. I'm using Final Cut Express to edit, Quicktime Player to resize the video to 640x480 (is too wide when saving FCE project as Quicktime movie), and Jes Deinterlacer to remove all of the jaggies that the original deinterlacing on FCE doesn't fully do (skateboarding video). I'm aware Final Cut Express 4 is a discontinued product, and Apple support over the phone can't help me. The quality is TERRIBLE on my smart phone, and used to be really good before the site changed. The Vimeo app played my videos very clear. I'm using a MyTouch smart phone. I want to know if the quality being bad on mobile is because of the sites being changed, and if there is anything I can do to get the quality I want. I've worked on this the past three weeks, and this is my final option, so any help would be greatly appreciated. Thanks. Here are the steps I'm using to export (still trying more export options in Jes Deinterlacer).
Step 1: In FCE, click "File", "Export", "Quicktime Movie". In "Include:", choose "Audio and Video", "All Markers" for "Markers:", and check box "Make Movie Self-Contained".
Step 2: Open file in QT Player. Click "Window" (at the top between "View" and "Help"), and choose "Show Movie Properties". Click "Video Track", and click "Visual Settings". Change the dimensions (which are supposed to be 720x480 4:3 but the video is stretched). Enter "640 x 480" for "Scaled Size:", then same with "Offset:" Keep "Preserve Aspect Ratio" unchecked, then when finished entering numbers check it (doesn't let you uncheck it which would be best). Check the "High Quality" box if it hasn't already been checked. Close the window, and click "File", and then "Save".
Step 3: Open file in Jes Deinterlacer. In "Input", check box "Reinterlace Chroma", choose "Video range", and check "Remove Jaggies". For "Project", choose "Deinterlace" and "Use Bottom Field". Check "Adaptive", "Local", and "Filter Chroma". In "Output", choose "Video range". Choose "Export", and "Mpeg-4". For "File Format:" choose "MP4", for "Video Format:" choose "H.264", and for "Data Rate:" enter "2000" for "kbits/sec". Leave "Optimized for:" "Download" as is. Choose "640x480 VGA" for "Image Size:", and "Current" for "Frame Rate:". For "Key Frame:" choose "Every", and enter "24" for "frames". Click "Video Options". Leave the "Main" box checked, and check "Baseline" for "Restrict Profile(s) to:". Choose "Best Quality (Multi-pass)" for "Encoding Mode:". Click "Ok". Click "Audio" (since done with "Video"). For "Audio Format:" choose "AAC-LC (Music), for "Data Rate:" choose "320 kbps", for "Channels:" leave as "Stereo", for "Output Sample Rate:" choose "44.100 kHz", and for "Encoding Quality:" choose "Best". Click "Ok" (leave "Streaming" alone).

First, I would do a Search on this forum for "FRAPS." There are several articles with comments on the best workflow and also settings for Import and for Export.
Next, YouTube is trobulesome. First, they re-encode everything and their specs seem to change weekly. It's tough to find out what they want on any given day. I'd go to their site and get the very latest instructions and attempt to duplicate those perfectly, knowing that they might be different tomorrow.
Good luck with this one, and good luck with the FRAPS footage.
Hunt

Smart Phone Apps

Similar Messages

Maybe you are looking for