Smart Phones with Proxy enabled....

hi,
i have an issue with one of our customer , they have a wireless network were users are using laptops and smart phones as well to access the network. to get internet access users have to enable proxy.
using laptops they will connect through wifi and they can access all internal network resources like emails and other internal applications, but they need to enable proxy to get access to internet. this case users who enabled proxy will also do exclude proxy for internal ip range.
but unfortunately smart phones normally doesnot have an option to exclude proxy for some ip ranges.... so smart phone users while they enable proxy they are able to access internet but internal resources will not be able to use as all the traffice from smart phone will be forwarded to proxy and proxy can forward its traffic only to its gateway.
how narmaly you guys fix this probelm ..i belive this probelm faced many of us before.
proxy is BLUECOTE
thanks,
Anvar

Hi,
You can use dhcp option 252 (automatic proxy discovery).
Inside the script that you will create you can define exclusions for internal subnets similar to web browser.

Similar Messages

Okay i want to go to smart phone with 2 year contract. i am wavoring between the 2g to 4g plan. verizon has decided not to chat with me for the moment. because i'm annoying. my question is, can i alter the G factor as i go if i need more need less and lea

okay i want to go to smart phone with 2 year contract. i am wavoring between the 2g to 4g plan. verizon has decided not to chat with me for the moment. because i'm annoying. my question is, can i alter the G factor as i go if i need more need less and leave everything else the same?

you can start out low and increase your data allowance as you need throughout the month, backdating it to the beginning of the billing cycle so you don't have overages; however, I found out the hard way that you cannot decrease your data allowance during the month and backdate it so you don't overpay for unused data.
what I do now is reset my data allowance to 2GB at the beginning of every bill cycle and then increase it if I get warnings that I'm going to go over... and I check it 3 days before my bill cycle ends to see if I think I might need to bump it up before the end of the bill cycle
it's annoying, but otherwise I end up paying thru the nose for overages or overpaying for data I don't use
BTW, I'm on the More Everything plan, which is the same plan you'll get unless you go Edge (where you pay the full price for the phone but don't get the 2-year commitment to it)

Win7 with FF 31, Android 4.2 smart phone with FF letest ver. using same account with 1 email. But phone is not get any pass, Bokmr, etc.

Brother,
We r using win7 with Mozila 31, Android 4.2 smart phone with Mozila latest ver. from google app store on 04/10/0214. Using same account with same email. But phone is not get any new information from win7 with Mozila 31. Pl z give helpful information.

Hi w3ur_team,
Thank you for your question. I understand that there are two devices that are logged into the Sync account. However the Android is not syncing.
There are two places we can check:
# In the Android Settings, under accounts is the attached account Firefox Sync or Firefox Sync (deprecated)?
# Do the login credentials work on accounts.firefox.com on the mobile device and are there any error messages on the Sync menu from Settings > Sync?
Please also see [[Firefox Sync troubleshooting and tips]] for more troubleshooting steps.

"CellSet" in my airplane that integrates smart phones with the avionics so I can use my phone during flight.

I have a BB 9000 issue.
My issue is that I use a "CellSet" in my airplane that integrates smart phones with the avionics so I can use my phone during flight. I do not listen to music while flying, so I have no audible indication at all that I'm receiving a call. The RF output by BLackberry's is so bad, that I have to mount it on the other side of the cockpit to avoid the RF interference thus making the vibrate notification no good. My older Blackberry's channeled the phone-ring through the earphone jack just fine. Who knows what BB/RIM was thinking, or the lack there of by not designing this option into their phones!

hello,
I don't see any question in your message ?
anyway, oneway of having a better situation is to use a car mount like the one from BlackBerry or a Parrot one :
http://us.blackberry.com/smartphones/accessories/visor_mount.jsp
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I have a Nokia N97. I'm looking for a smartphone that is Blue tick approved for reception in rural Australia, which means only Telstra Next G. I would appreciate hearing about any smart phone with gd rural reception, and esp new versions of Android

There are reports of some 3G, or NextG ph's without a blue tick, with as good a reception as the blue ticks. This may include iphone, HTC Desire, and a new to Telstra shop Motorola Defy, that has a blue tick. Telstra staff are not able to give any information re upcoming models of smart phone + good rural reception

I was just having a look back at this post on the Q + A Session and had two thoughts:
- Did Nokia ever address the questions that they deferred by saying they will get back to them later?
- On Q9 the answer from the engineers that it was not an easy task to get Virtual RAM is a cop-out.
They admitted that the c: drive has memory paging and that this make apps run faster and smoother. That implies that apps installed on the mass memory won't run as fast or smoothly. I suspect that a lot of problems with apps are caused by being installed on the mass memory.
So where does that leave N97 owners, Nokia are very unlikely (like a snowballs chance in...) to recall N97s to have more memory fitted, so it goes without saying that Nokia should work on Virtual RAM from the Mass Memory as long as this can be accessed as fast as the c: drive (I don't know if this is even technically possible).
The decision to put such a small c: drive on the N97 was a terrible one, especially when you consider the position of this flagship device in relation to Nokia's move towards service with the Ovi Store and the additional overhead of the homescreen with widgets. Nokia all but acknowledged this by increasing the c: drive in the N97 mini. All I can hope is that Nokia have learnt from the bad publicity that this penny pinching exercise has caused and that whoever made the decision has either lost their job or been demoted to the most junior position in the company.
Frustrated N97 owner.
Nokia N97 (RM-507) v 22
iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

Setting up email on smart phone with folders on An...

Hi
I am having trouble settiing up emai on my smart phone. I can set it up ok but cannot get all my folders.
I have followed the guides as listed (even though some is contradictory) using Imap or Pop3 with and without SSL.
Please can someone give me a step by step guide (dont refer me to the links please as some say use IMAP and some say since you have changed from yahoo use pop3) i have done both - neither work!
I dont know what to do!!
Thanks in advance

To see the folders that are on the BT servers you will need to set your phone email up as an IMAP account. You can use the onboard app or download an email app. I use the Aquamail App and find it very good and was easy to set up.
If you use the onboard app make sure you set it up manually and select IMAP. The Aquamail App more or less sets itself up but if needed youuse the same settings.
The settings you need are:
Incoming:
Username : [email protected]
Password: xxxxxxxx
IMAP Server: mail.btinternet.com
Security: None
Port:993
Outgoing:
SMTP Server: mail.btinternet.com
Security type: None
Port: 465
Require Sign in (Tick box)
User Name: [email protected]
Password:xxxxxxx
Email check frequency: your choice
Sync Email: Tick box
Notify: your choice

Upgrade to smart phone with discount.

Hello, first time poster here!
I have a Samsung myshot A, and I have an upgrade available that allows me to have discounted prices. (I am not sure how to know if it is an annual or contract related upgrade)
Anyways, I'm looking at a couple Droids and the iPhone. Do I have a discount there at all? Can I see what my discount is getting me?
Also, I have $40 to put into a phone for a monthly payment. The droid and iPhone require data packs. I would also want unlimited texts. What is the cheapest texting service that provides unlimited texting to Verizon? Is it the same for both iPhone and other smartphones?
Lastly, I've been searching the forums and see that there is an option to purchase a smartphone, then replace the data plan, with a data block? (cheaper supposedly). Is there truth to that? Is there something illegitimate about it?
Thanks!

HATRIX wrote:
Hello, first time poster here! Welcome!
I have a Samsung myshot A, and I have an upgrade available that allows me to have discounted prices. (I am not sure how to know if it is an annual or contract related upgrade) Anytime you upgrade at a discounted price, you sign a new contract; in other words, all discounts are contract related...
Anyways, I'm looking at a couple Droids and the iPhone. Do I have a discount there at all? Can I see what my discount is getting me? If you log on to your account, and click on "upgrade", you will be shown prices for 2 yr, 1 yr, and no contract. Based on the length of the contract you sign, the discounts vary. For the iPhone you will pay $199 (16GB) or $299 (32 GB) on a 2 yr contract. You can go to the phone listings and check the various Droids for their upgrade prices.
Also, I have $40 to put into a phone for a monthly payment. That will cover the data plan for a Droid or the iPhone, plus your shared line if you are on a family plan. If you are looking for an individual plan, $40 isn't going to get you more than a simple basic phone with 450 minutes of call time, and no texting. The droid and iPhone require data packs. I would also want unlimited texts. What is the cheapest texting service that provides unlimited texting to Verizon? Is it the same for both iPhone and other smartphones? Texting bundles give you limited texts to other carriers, with bundles of $10 or more giving you unlimited Verizon to Verizon texts. Add $30 to your voice plan for unlimited texts to all carriers. The same texting plan can be added to any phone.
Lastly, I've been searching the forums and see that there is an option to purchase a smartphone, then replace the data plan, with a data block? (cheaper supposedly). Is there truth to that? No - a smartphone requires the unlimited data plan. There were a few select phones that you could do that with, but it was a limited data plan for $9.99 (25 MB) and it only applied to specific phones. Is there something illegitimate about it? Not illegitimate, just not an option for most.
Thanks!
To sum up, a Doid or iPhone is going to cost you up to $200 or more, discounted (the full retails prices are $500 or more) and your monthly plan, with unlimited texting, is going to run you $100 or so, if you are on an individual plan. On a family plan, you can be an add-a-line for $9.99, add a texting bundle for $10 or $20, (unless the family plan is Talk & Text and already has the unlimited texting on all phones), and add your data plan for $29.99. That;s the only way I see you getting this for $40.
Hope this has been helpful....

How to read the keyboard of a smart phone with labview mobile?

The subject about says it all. I have an HTC phone with keyboard that is running WM 6.1. Using key events I can catch the left and righ soft keys and the left-right-up-down cursor movements, but it doesn't see the keyboard.
Mike...
PS: as a side note... given that Microsoft has signalled that it is pretty much abandoning the WM platform due tio lack of acceptance, I wonder what NI is going to do for mobile applications?
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Hello, Are you using the PDA Button VIs? Take a look at the Button Input VIs- Windows Mobile.lvproj example in the example finder and let me know if you have tried this. Or the Key Events - Windows Mobiel.lvproj example.
National Instruments

If i get 2 smart phones with a contract and decide to end the contract in a year how much would it cost to get out of the contract?

.

@sosalamron,
A new phone is definitely an exciting time! I'm sure that once you get you new smartphone with VZW you will not want to leave.
However, if you were to cancel after a year you would be billed a cancellation. The cancellation fee is $350.00 for each smartphone, but is lower $10.00 every month you complete of your agreement. So if you have the service for 12 months, that will lower the cancellation fee by $120.00 bring it down to $230.00.
JohnB_VZW
Follow us on Twitter @VZWSupport

*611 not working on pay-as-you-go, non-smart phone

I have a basic, non-smart phone with the pay-as-you-go plan (pay $100, good for one year, all calls 25 cents a minute.) It is an older Audiovox 8615 CDMA phone that is mobile-web enabled, but it will not handle apps such as MyVerizon. Incoming and outgoing calls work fine. Voicemail works fine. Text works fine. I have had this account for two years and have been very happy with the service.
Problem: I can no longer reach *611 (add money, check balance), or #225 (check balance). I get an "All circuits are busy, please try your call again later" message. I first noticed this several days ago and have reported it and have a repair ticket in, but was wondering if anyone knows what might be going on here? I have internet service and a laptop, so can still use the Verizon Wireless web site to manage my account. However, I believe I should still be able to check my balance or add funds using the phone itself, as I have in the past. Thoughts?

Just got off the phone with Verizon Prepaid customer service rep who called to report on my trouble ticket. The problem is most likely my phone and not the network. She suggested doing a factory reset on the phone and if that does not resolve the problem, I'll need to get a newer phone. Just posting this follow-up in case others have a similar problem.

Sending data during the call with java enabled mobile devices

hi every one ,
this is the problem :
i have 2 mobile phone with java enabled os , i want to call (dial) from phone1 to phone2 with java code , (this will be done by platformRequest("tell:123456"))
AND then i want to for example press key '1' in phone1 during the call some program send this key to phone2 and in phone2 i want to switch this key and understand that was key '1' ...
how can i send this data for example a key pressed event to another phone with J2ME ???
i am developing it with netbeans Mobile Application by the way ...
could you please tell me your opinion and help me in this ,
Thanks a lot ,
Omid

Hi Kanagaraja L,
Thanks for you response.
No I haven't created Created RFC Destination , this RFC destination will be of my JAVA system ???.
I have tried creating the partner logical system in WE20 and dine the following steps:
1. Partner No.   IDES800     Ides 800 System - Sender System
    Partn.Type    LS          Logical system
2. The tab Post processing : permitted agent is filled with default parameters.
3. Then in the outbound parameter table control I have pressed the add record button and got a new screen in
    which I have made the following entry :-
Partner No.           IDES800        Ides 800 System - Sender System
Partn.Type            LS             Logical system
Partner Role          LS             Logical system
    Message Type      SYNCH                            ALE:Dummy Message Type for De
    Message code
    Message function
Under tab Outbound options :
Receiver Port = A000000008 (This I have selected from F4 help)
Basic type = SYNCHRON
Saved it with the above data.
Now I am not able to understand how to do the things you have mentioned in 3rd step in your reply.
What are all the things I have to do kindly tell , as I am very new to Idocs so don't have much knowledge.
Edited by: Rachit Khanna on Dec 7, 2009 1:49 PM

Send data during dialing with java enabled mobile devices

hi every one ,
this is the problem :
i have 2 mobile phone with java enabled os , i want to call (dial) from phone1 to phone2 with java code , (this will be done by platformRequest("tell:123456"))
AND then i want to for example press key '1' in phone1 during the call some program send this key to phone2 and in phone2 i want to switch this key and understand that was key '1' ...
how can i send this data for example a key pressed event to another phone with J2ME ???
i am developing it with netbeans Mobile Application by the way ...
could you please tell me your opinion and help me in this ,
Thanks a lot ,
Omid

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Why have I lost my gmail email address twice since syncing my Nokia C3-01 phone with Firefox?

I originally had a btinternet email address which was apparently my primary Google email address. I had great difficulty obtaining a Google gmail address which eventually became my primary email address. My original btinternet email address became my 'recovery email address'. Since 'syncing' my new Smart phone with Firefox I have lost the use of my gmail address and Google now refers to the btinternet address as my primary email address - which I don't want!! I have already 'recovered' my gmail address once - only for it to disappear again subsequent to using my mobile phone. Please help!

I read a few more discussions on this problem elsewhere on-line with the suggestion that I had a bug on my computer that hijacked my email account to send emails elsewhere (not that I had any clue on how to discover that on my computer).
I followed the suggestion to access my email account on-line and change my password and make it stronger. I did that and was able to get my emails downloaded to my computer and other devices.
I'm pretty sure that my original problem started when I unsubscribed from the Calorie Counter on-line newsletter by pressing a link at the bottom of the email I received from them. A screen came up that said I was unsubscribed and then disappeared in a flash.The experience seemed odd and weird compared to other times when I've unsubscribed from something.
As a test I resubscribed to the newsletter and then unsubscribed. I was directed to one of CCounter's internal web pages and went through a couple of steps in order to finish the process... all very professional and obviously on the newsletter's website.
So the lesson I learned was have a strong password for my email and change it occasionally. And do the same for other accounts that are password protected.

Replacing an phone - not a smart phone

I currently have a plan on which I have 3 smart phone with unlimited data. I have 2 non-smart phones. One of the non-smart phones is broken and I want to replace it with one I bought on e-bay. If I replace this phone will it effect my unlimited data on my smart phones?

PHL, no worries, I can address your equipment change concerns. Your Unlimited data plan will not be affected or removed if you activate a device that you acquired from a third party.
If you upgrade to a new device with promotional pricing, the Unlimited data plan will be removed and you will be moved to a current data plan offered or the Share Everything plan. Have you seen our new Share Everything plans yet? Our new plans may work best for you. Check them out. Click http://bit.ly/xdDajD ^LH

Upgrading a basic phone to smart phone without 'Share Everything'

I have older Family Share Plan containing basic phones, as well as smart phones (with tiered 2GB/$30 monthly data). When they are eligible for upgrade, will any new smart phones added to the plan be able to receive the same 2GB/$30 data that other phones currently on my plan receive?
The more unreasonable options seem to be requiring every single person on the plan to switch into Share Everything, or booting the person looking to get a smartphone out of the plan. Neither of these are a viable option.
Thanks for any help clearing this up!

The $30 per month is for 2 GB of data, in addition to whatever you are paying per month for voice/text/insurance/taxes, etc. When you do switch, if you aren't aware of it, do it on the first day of your billing cycle so that you don't run into proration.
And some people are reporting that some Corporate stores try to convince people that they'll save money on the Share Everything plan. Some will save money, some won't. Just do your homework, know what plan you want, and read your new contract before signing!

Smart Phones with Proxy enabled....

Similar Messages

Maybe you are looking for