Smart quotes got turned off?

Working in CS3. It appears that my smart quotes got turned off. Not sure where to turn them back on. Any advice?
Thank you!

It's in the Preferences. There is also a hotkey combo, but I always forget what it is -- you might have pressed it.

Similar Messages

  • Tip: Placing Straight Quotes without turning off Smart Quotes

    I thought I was alone in this dilemma until I read a recent thread from someone wishing to easily place straight quotes into a document. Prior to this, the quickest way for me to place straight quotes into a document was to copy/paste them from a text editor. Even when you try to add straight quotes using the ASCII code for them, Frame overrides this and replaces them with smart quotes.
    Last week when I was customizing the Frame 9 interface (because it is ungodly poor) I stumbled across the native command for inserting straight quotes regardless whether Smart Quotes is turned on or not. The native command is "CharStraightQuote", but you have a lot of options with how you want to implement it. Because there are so many different ways to implement this, I will describe only the default method.
    There is a flyout toolbar for special symbols. The content of this flyout is controlled from your "menus.cfg" file and is near the top of the file. I believe you can add the following line anywhere within the "menus.cfg" file, but you will find similar entries about 30 lines down from the top of the file.
       <Add CharStraightQuote                <Menu SpecialSymbols>>
    By the way, if you look through your "cmds.cfg" file, especially near this CharStraightQuote entry, you will find a whole bunch of similar entries that are useful and could also be added to your menus.

    To insert the straight quotes directly from the keyboard (overriding Smart Quotes): press Escape, then type quotes.
    (note: no need to hold down the Escape key)
    Shlomo Perets
    MicroType, http://www.microtype.com
    FrameMaker/TCS training & consulting * FM-to-Acrobat TimeSavers/Assistants
    "Improve your FrameMaker Skills" web-based training sessions

  • Check if mobile phone got turned off using j2me application

    hello
    Is there any way to know if the mobile phone got turned off from my j2me application.
    this is really urgent please help me out.

    alyaitani wrote:
    hello
    Is there any way to know if the mobile phone got turned off from my j2me application.No. Why do you think you need to detect this?
    this is really urgent please help me out.[http://catb.org/~esr/faqs/smart-questions.html#urgent]
    db

  • HT201412 after upgrading to newer iOS version 6 only my iphone 4 got turned off.

    hi ,
    after upgrading to newer iOS version 6 only my iphone 4 got turned off. it could not turned.. contacted apple store they tried all the option .. solution was replace with other iphone4 by paying £119, Which is really not the new one, its refurbished one..

    So what's your question?

  • AIPORT GOT TURNED OFF BY xfinity wifi - how do i turn it back on?

    I've had comcast infinity for a long time and it worked with my airport base station.l  this week comcast 'offered' creating a wifi hotspot.  I mistakenly let it be created and now my airport connection cannot even be found.  doesn't show up and I am using an unsecured wifi site in my own house.  HELP please. 
    equip: macbook pro - 13 inch retina mavericks
    my old mbp using leopard still shows airport and connects to it.

    I'd start by looking for information on how to turn off the Comcast hotspot.

  • Free Transform got turned off

    I accidentally hit something turning off my ctrl + t shortcut for free transform tool. This now will open and close my text tab. How do I get this back to free transform?

    CTRL T for transform is Photoshop for transform, Ctrl T in Illustrator brings up the text palette.
    In any Photoshop or Illustrator check your edit >> Keyboard shrtcuts, to see if the correct keyboard.
    The shortcut for switching documents is here. You may hear people refer to this as Ctrl Tilde, since the ~ shares the same key as `.

  • I just want to turn my spell checker back on, for it got turned off by mistake.

    Never mind, resolved the problem!

    10 minutes of footage is normally about 2GB, so you must be doing something that adds a lot of content. Copying and Pasting clips within the same project does NOT add significantly to the size of the project. It simply adds another thumbnail that points to the same Media file. (When you empty the iMovie trash, that Media file is discarded only when ALL the clips that point to that file are discarded.)
    If you are Copying and Pasting clips from OTHER projects then Yes, the entire Media file of the clip will be copied to the destination project. When doing that, it's important to Copy and Paste all the clips that share the same source file at the same time to avoid iMovie copying the same source file more than once.
    If the project size is a problem for you, there are other threads here discussing how to reduce the size. Search for words like "iMovie trash", "non-destructive editing", and "bloated".
    It's unlikely Apple will change this feature for non-destructive editing has huge advantages, including the elimination of project corruption, a problem in all versions of iMovie up to iMovie HD 5.
    The solution is to buy a big external drive, which fortunately is cheap. If you want to edit video, it's almost a requirement. If your system can't comfortably handle a 17GB project, it sounds like you may need that regardless.
    Karl

  • My i pod 3rd generation the free apps i got turn off as soon as they open

    I have a 3rd generation i pod touch for some reason when i use an app it closes right after opening and its really annoying can someone help me please

    If that does not work, try here:
    iOS: Troubleshooting applications purchased from the App Store
    Downloading/installing a new app frequenlty helps.

  • BT Router turns off wifi with radio app

    Hi everyone.  I have had BT broadband for a year with no problems.  In the last two weeks when I try to listen to TuneIn radio app any Apple device, the wifi router immediately turns off.  Wifi works perfectly for all other apps and stays connected when computers, iPads, iTouches, iPhones are in use.  I can't work out what has suddenly happened for internet radio to cut out the wifi immediately I press the play arrow.  Any thoughts would be gratefully appreciated.  THANK YOU.

    If you have done a full factory reset, then things would be back to where they were when you first got the home hub.
    Its not likely to be a broadband issue, but its possible that TuneIn radio is overloading the wireless network somehow.
    Its worth trying these thing first.
    Try giving the 2.4Ghz and 5Ghz frequencies different SSids (names). Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
    http://bt.custhelp.com/app/answers/detail/a_id/447​98/~/i-have-problems-connecting-5ghz-and-dual-band​...
    Also make sure that you have "smart set up" turned off. See link how to do that.
    http://bt.custhelp.com/app/answers/detail/a_id/443​28/~/switching-smart-setup-on-and-off-on-the-bt-ho​...
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Audio limiter was turned off!?! How do I fix it?

    When taping a reception this last week, my audio limiter got turned off and the sound is blasting.  Is there a way to fix this in soundbooth? Obviously, this is something I cannot just re-tape.  Any ideas are appreciated!!

    http://support.apple.com/kb/HT2090 How to Troubleshoot iSight
    how do I make it work on skype?
    Post on the Mac Skype forums and read their tech support articles.

  • Turning off the charging LED?

    Dear Sony,Appologies if this is already covered, searching just finds old issues with LED and stamina.I'd like to disable the charging LED. I've started using a dock at night and I can't hide it by butting the phone face down. I've solved the issue of notifications when I'm asleep with the Smart Connect SW turning off all data so I can't get them but the charge light is annoying. Should this not be an option in Smart Connect to disable LED and then use the between hours to activate? The only option I can find anywhere is the 'pulse notification light' that seems to do nothing. I'm running the Aus unbranded .253 software.Thanks

    Ok there is a way around it - HURRAH!  not fully tested it but it seems to work so far.   Download lightflow This method is based around the logic of if you can't stop it flashing, at least we can make it so dark/dull (and static if you prefer) that you won't even notice it. You will need to create notifications for both charged battery and charging battery.So... take Charging battery:Under Notification tab:- put a tick in Enable notification- exclude from sleep modeUnder Light tab:- Put a tick in Enable ligh- Select Notification colour- Go for Custom Colour- select bottom right - the blackest / purple-ist you can find!- hit ok-Select Light duration - here either chose always on or very slow depending on how sensitive you are - I found always on less distracting than waiting for it to flash, no matter how the dark the light is.- change light duration to either do not automatically switch off if you NEVER want to see the charging light, even in the day, or say Stop after 8 hours instead.- If opting for flashing rather than a static light, change LED flash rate to Custom LED Flash rate and fiddle with the milliseconds - extend the off part by many zeros! Repeat for Charged battery option. That's it - good luck and happy sleeping. Melanie

  • SAP Livecache automatic log backup turning off

    Hi,
    We have set automatic log backup ON for our livecache. Recently, it got turned off automatically.
    We found that our filesystem to which the archive files were getting generated during log backups had got full.
    My question is, if the filesystem where log backups are archived gets full does the setting of automatic log backup gets turned
    OFF automatically? Please suggest,
    Rg,
    Sandeep.

    >  We have set automatic log backup ON for our livecache. Recently, it got turned off automatically.
    >  We found that our filesystem to which the archive files were getting generated during log backups had got full.
    >  My question is, if the filesystem where log backups are archived gets full does the setting of automatic log backup gets turned
    > OFF automatically? Please suggest,
    Yes, that is expected behaviour. If the database can't back up logs to a directory it gets turned off. You'll have to release space and turn it on manually.
    Markus

  • Need a digit to turn off machine

    after suffering from the dreaded overclocking lockout and recovering my machine using MSI's marvelous jumper - Thought i'd fried the thing until I read the manual.
    Obviously, the bios was then cleared
    The problem I now have is that when I close down my machine, it does'nt automatically turn off but brings up the windows  XP 'its now safe to turn off your machine' screen. A button press on the case and it goes off.
    Is there something in the bios that will shut the machine down automatically as before?

    has apic got turned off in advanced bios features

  • Turning off Smart quotes?

    Does anyone know how to turn off smart quotes in RHX5? I've
    posted other questions related to the issue I'm having currently
    with double quotes and the copyright sign showing up as ? in the
    help files once they been included in a build. No one in my company
    seems to know the right solution, so now I'm seeing if I can just
    turn off the smart quotes.

    Hi Paul,
    I think Peter's method is indeed the way to go. For future
    reference you can tidy up the word source via the instructions on
    this page:
    http://support.microsoft.com/kb/206165
    Cheers
    Craig

  • Smart Quotes will not turn off

    I have Smart Quotes turned off in Smart Punctuation, but they are still curly! I need them straight, how do I get then straight? AI CS5.5, OSX 10.8.2.

    I only have CS3 in front of me right now.
    Straight quotes and curly quotes are different characters residing in different slots of the font. Toggling on/off the Use Typographer's Quotes setting in Document Setup does not retro-actively update text already set on the page. Try changing the setting and then re-typing the existing characters.
    Type>Smart Punctuation is basically a pre-packaged find/replace command. It replaces straight quotes with curly quotes when you tell it to (for either the whole document or just the current selection), but it does not do the opposite. So if you are trying to replace existing curly quotes with straight quotes, you'' need to do your own Find/Replace.
    Whichever kind you have the document set to consider default (controlled by the Tyographer's quote setting in Document Setup) is the one that will be keyed into the Find/Replace dialog if you key it in. So you'll need to copy the other kind so that you can paste it into the Find/Replace dialog.
    JET

Maybe you are looking for

  • Mac stuck in safe mode start up loop

    Hi everyone, it seems I have run into a problem and can't find answers online. First off I have a MacBook intel core duo on the latest snow leopard and mac software is up to date. It all started when I had to restore my iPhone and it had some problem

  • NX 6125 too much time to complete POST. USB error

    I have been having some issues over the last week or two NX 6125 takes too much time to boot. I'm dual booting it , Windows XP and Linux Mint. It takes more time to complete the POST, during POST, LEDs on all the USB devices attached to it will go ON

  • Reconciliation account

    Hi gurus, user wants to eliminate the reconciliation acccount Asset in Control data of GL Master. He wants to post directly to that GL account so that he is asking to eliminate the reconciliation account from the GL master. What will be the impact on

  • ITunes wouldn't accept my solo card, then took out money from my account.

    I recently switched from a switch card to a solo card for my purchases on the store, and whenever I entered my details it said that they were wrong and kept asking me for details which weren't required for my solo card, e.g. Issue number. Well I trie

  • VO Auto Refresh error - Unsupported query for Continuous Query Notification

    I created a read only view object and set the auto refresh property to true. According to the documentation that was all that need to be done in order to enable auto-refresh for a view instance of a shared application module (which I am using to retr