Smart Recorder Audigy 4 not work

I've had an Audigy 4 pro for a couple of years now and had full use of the smart recorder. When I updated to windows Vista I lost the use of this. Last week I decided to buy the Xfi and I had full use of smart recorder again but I didn't like the new software that came with xfi. On the audigy model I was able to select auditorium etc in the EAX but with the xfi it gives me 22 dials of reverb to mess around with - yeah right
!!! Owing to this I decided to go back to my Audigy 4. What I don't understand is why Smart Recorder will work in Vista with Xfi but it won't with Audigy?
Am I doing something wrong? I've disabled my onboard sound and I've tried to run smart recorder in windows xp compatibiltiy. When that didn't work I uninstalled and reinstalled using XP compatibility to be told I didn't have a supported device.
Why can't Creative just update the hardware and leave the software nice and simple lol - the whole sound of Xfi recording just wasn't in the same league as the Audigy 4 so that was a waste of ?220
If noone has an answer to this then can you let me know if there is a good recording software out there that has recording settings of mono or stereo and bitrate settings. I don't want to edit my stuff I just want it to sound good with the initial recording and Xfi just didn't!
Thanks for your help

i still have a audigy 4 non pro and this stupid digi in/out racket. I still try to get my xbox work together with my SB at the digi in coax port. I only hear stereo sound in the menu but i just get a "crack"w hen digi output "Reciever supports AC3" is turn on and the dvd has a AC3 stream. DTS though. Can somebody help me?

Similar Messages

FORM RUNTIME record=collect is not working.

Hi
FORM RUNTIME record=collect is not working which is set to user level.what to do?
rgrds

Pl post details of OS and EBS versions, along with the complete steps you took to enable this profile option. What does "not working" mean ?
MOS Doc 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications
HTH
Srini

New Smart Playlist Keyboard Shortcut Not Working

Using iTunes 7.5/Leopard 10.5.1
The shortcut for creating a new smart playlist (optcmdN) is not working. However, I can use the keyboard shortcuts for creating a new folder or a new playlist. Any of you have the same problem?
Thanks!

OK...this might be too simple to possibly be the answer...but is the number lock key down on your keyboard?
EDIT: Well... no, that can't be it...or the new folder and new playlist keys wouldn't work either. Have you downloaded any widgets or third-party apps recently?
Message was edited by: Diane Wordsmith

My HP photo smart C6280 printer does not work with CS6. Any Help?

My HP photo smart C6280 printer does not work with CS6. Any Help?

How does it "not work"?
What OS version are you using?

Smart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"

LSmart Recorder - Audigy 2 ZS - Win 7 - "no audio device available"nI've got Windows 7 Ultimate 64 bit and a Creative Audigy 2 ZS. They've worked fine together, but I recently tried to install the programs that come on the CD and I can't get Smart Recorder to work.
It has a message saying "There is no audio device available on the system. The application will now close."? I checked my control panel and it definitely shows a my Audigy 2.
I found an old post that suggested using the CTZAPXX.EXE on the CD, but it didn't do anything. I watched the CPU go to 50% usage, but nothing happened for minutes. (http://forums.creative.com/t5/Sound-Blaster/Speaker-settings/m-p/40229)
How can I fix this problem with Smart Recorder?
Thanks,
Mike

Is it time to upgrade to X-Fi or another brand?

Dynamic rooting (User Record) setting is not working in Nakisa OrgChart SP3

Dear All
The Dynamic rooting setting is not working in the Nakisa OrgChart SP3.
It is giving an error message - "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date."
We followed the same steps as given in the Admin guide of SP3 (P.no. 109 - shown below)
In Orgchart --> General Settings:
* Select the Org chart root value source.
User Record: Retrieves the record specified in the next step from the employee data element.
*Do one of the following to define the org chart root:
If User Record was selected in the previous step, select the field containing the ID of the required organizational object in the employee data element from the User record field drop-down list. For example, if you wish to root the org chart at the org unit of the logged-in user, select the field containing the org unit ID. Hence, we have selected the Org unit ID.
Note:
We had enabled single sign-on with logon tickets
Retained the standard settings in Security Settings --> Employee Source
Had provided full authorization to the roles
If we use the "OrgChart Root" option available in 'Orgchart root value source', the org structure gets displayed correctly from the root object defined.
As this is an standard functionality, Kindly guide us in resolving the issue.
Regards
Ravindra

Ravindra.
You don't have to and shouldn't always include the username and password parameters for the SAP Connection string. When you omit them it will use the user's login credentials.
Remember though that:
The SAPRoleMappingConnection will need them included in order to get the details for the user in the first place.
Without the username and password specified in a connection string you can't click the option to test the connection and result in a successful connection. Remember unable to connect does not necessarily equate to wrongly configured.
I've filtered the log file for errors and the following entries were flagged up:
26 Jun 2012 10:00:06 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:13:52 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:43:49 ERROR com.nakisa.Logger - java.lang.reflect.InvocationTargetException
26 Jun 2012 13:55:09 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 14:32:03 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:48 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
At the very least it looks like SAPPositionVacancyDataElement is missing and whilst the other errors around it are unfamiliar I wonder if it might be a good first step to see if you can track down the reference to and existence of this data element? That being said it looks like your last test occurred well over an hour after this (so you may have already resolved it) and resulted in nothing but information messages. If that is the case it might be worth "rolling" your log file or manually trimming it to the right time frame when posting it? Otherwise it can be misleading as people could flag up issues you have already resolved.
So assuming you haven't tried Luke's suggestion (which should only take a couple of minutes to do) I think you should go back and do so right away .
Regards,
Stephen.

Hp smart web printing does not work on firefox. HP says this is not their problem and to contact Mozilla. Is there a plug in available?

I just bought a new hp printer. the software has a feature called HP web smart printing. The feature works on explorer but not on Firefox. HP says this is not their problem and suggested I contact Mozilla. Is an add on available and if not will one be made available.
I am using v. 3.6.13. and the printer is HP Officejet 4500.

HP smart web printing is an application that only works with IE. In spite of what HP have told you, if they want their application to work with Firefox they will need to make a version for Firefox. It is not down to Mozilla to make a version of the HP software for Firefox.

LSMW Recording method is not working for transaction code FBL5N

Hi Experts,
I am trying to prepare LSMW to create dispute cases for customer line items through LSMW Recording method. When i was trying to do through SHDB Recording its working properly through Program. But its not working through LSMW Recording method means its not executing to next screen, immediately its displaying session completed screen.
Please do let me know any soution for this.
thanks,
Sriram.

Hi Sriram,
If my memory serves me correctly, a BDC will not work correctly with a list. This is mentioned somewhere in the SAP help pages.
Now I am not familiar on how to create dispute cases but using FBL5N does not sound to me the way to go. I assume that you use FBL5N in order to determine to which documents to link the dispute to, however you should be able to get the requested info from the BSID/BSAD tables.
Also in case you want to change the customer line item in the accounting document, check the data transfer workbench (SXDA) as SAP delivers a standard program for this.
Kind regards,
Robert
Edited by: RJ. Schamhart on Jan 14, 2011 12:35 AM
Edited by: RJ. Schamhart on Jan 14, 2011 12:43 AM

Audigy partly not working in XP - now "disappear

I have an Audigy in an AMD64 PC.
Dual boot - Linux (suse) no problems
XP - no wave sound, midi OK.
Mixer and speaker test in Creating HQ fail to start.
Driver update - no hardware detected.
Diagnostics - hardware OK, midi OK, wav fail, mixer fail.
Tried a repair from CD, no joy.
Uninstalled and cleaned registry. Deleted all files in Creative area.
Now CD won't run - no hardware detected.
Still to try a clean sweep or XP clean boot but it's very odd.
Nothing new installed bar some XP and AV patches.
UPDATE
Tried clean sweep etc no joy. Windows finds the card as PCI input and game controller and uses own drivers to get sounds.
Audigy CD - not see card.
Audigy drivers manually installed - no sound.
Audigy diags - H/W OK.
Mixer fails to start.
OK in Linux on same machine.Message Edited by rjbragg on 03-09-200608:35 PM
I've now reinstalled XP, card seems fine. All patches still OK, Norton AV etc, all OK, webcam OK, gamepad OK.
Rebooted PC - OK.
Cold start - OK.
Leave overnight - no card seen.
Works OK in linux still.
Very puzzlingMessage Edited by rjbragg on 03-25-200609:03 AM

I have an Audigy in an AMD64 PC.
Dual boot - Linux (suse) no problems
XP - no wave sound, midi OK.
Mixer and speaker test in Creating HQ fail to start.
Driver update - no hardware detected.
Diagnostics - hardware OK, midi OK, wav fail, mixer fail.
Tried a repair from CD, no joy.
Uninstalled and cleaned registry. Deleted all files in Creative area.
Now CD won't run - no hardware detected.
Still to try a clean sweep or XP clean boot but it's very odd.
Nothing new installed bar some XP and AV patches.
UPDATE
Tried clean sweep etc no joy. Windows finds the card as PCI input and game controller and uses own drivers to get sounds.
Audigy CD - not see card.
Audigy drivers manually installed - no sound.
Audigy diags - H/W OK.
Mixer fails to start.
OK in Linux on same machine.Message Edited by rjbragg on 03-09-200608:35 PM
I've now reinstalled XP, card seems fine. All patches still OK, Norton AV etc, all OK, webcam OK, gamepad OK.
Rebooted PC - OK.
Cold start - OK.
Leave overnight - no card seen.
Works OK in linux still.
Very puzzlingMessage Edited by rjbragg on 03-25-200609:03 AM

My iMovie voice recording is suddenly not working. As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured.

As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured. HELP!!!!

As far as I can see, it's random. Everything. Nothing makes any sense!
A the moment, the iPhone is playing music with the SIM card, but without anything plugged into it, but it's occasionally fading in and out.
Oh, and I doubt this is related, but about two months ago the iPhone failed to show that the battery was draining - it was stuck at 100%. This went on for a few days, it wouldn't even warn me at the 20% mark, it would just shut off. This happened for at least three full charges - I remember at one point it suddenly started working again at about the 70% mark, I'm not sure if it was alright after that or if it went glitchy on the next charge... but in any case, the problem mysteriously never reappeared after those few days.
Message was edited by: Shiranai

Purchasing Info record screen layout not working for ME11

Dear All Experts,
I got requirement where GR Based IV and GR should be required for one vendor. So htought to create PIR from where I can make these two fields DEFAULT. So I went to table T162 from where I can make these two fields mandatory for ME11.
I followed the path : SPRO - Materials Management - Purchasing - Prcahsing Info Record - Define Screen Layout for making fields mandatory for ME11.
It is not working at all, as well I can see rest irrelevant fields which are not of my use are required. Have I missed any piece of configuration somewhere in MM ?
Experts guidance from forum will be very much appreciable.
Regards,
Revati Joshi.

HI,
as you know we can create purchasing info record manually as well as automatic at time of Po creation
If you mark it in ME11 manually it will be helpful to you
or you can mark its required field in Vendor master record as well for your vendor account group in following path.
Logistic general - Bunisess partner -vendors > control > define accont groups and field selection > select your account goups and click on details and double click on purchase data and check for "GR based invoice verification" and mark required field
Regards
kailas ugale

Recording feature is not working

Hello all!
I have a problem with the LCCS session recording feature - it works but only sometimes (average - 1 time out of every 10 tries). I am using the latest version of the SDK - Version 2.2.0 (Nov 10, 2011). I also tried Player 10.1 and 10.3 client APIs.
I have a registered WebDAV repository with a Server API - AccountManager.RegisterRepository(...), I also checked to be sure this repository is registered with API method AccountManager.getRepositoryInfo() - all seems ok, the repository is registered and remembered by the LCCS server.
I then got a sample recording application which was provided with the SDK (com.adobe.lccs\sampleApps\Recording\Recording.mxml) and set my roomURL, userName and password - application seems to work as required. I click the Record button in my application to record, unclick the Record button, close the application, then wait for a long period of time but nothing is uploaded to the WebDAV storage in most cases ... only sometimes does it work and I have not found any pattern or logic difference when it works.
I also tried to start recording by server API - AccountManager.startRecording(...) - but it is also not working as expected. I reviewed the LCCS code and detected that this method should publish the item into the following collection and node:
RoomManager->roomState->recordingState. This method works ok, and the LCCS servers response is OK, but when I get room information with the server API AccountManager.getNodes(roomName, "/") I cannot find any information by returned XML.
By the way I checked the WebDAV server logs - there is only info about putting a file into storage by LCCS servers for success cases, not any error info about unsuccessfully putting files - so it would appear that LCCS did not even try to upload the files for the unsuccesful recording.
Any tips that you can think of which might explain what could be wrong here? It seems there is an error on the LCCS side - maybe they forgot to update their API/sample files to something that works?
I am losing my mind trying to solve this issue, please help me!
Thank you in advance!

Hello Raff,
Thank you for your initial advices, but looks like they wil not help us to resolve issue. Let me explain my experiments more detailed:
1. Server API
It is what I am planning to use for implementing recording feature, and looks like it does not work at all by some reasons at LCCS side. I used C# version of API which is going with SDK - com.adobe.lccs\serverIntegration\csharp\LCCS.cs, and I used this method:
AccountManager.startRecording(string room, string archiveId, bool guestsAllowed)
with following parameters:
AccountManager.startRecording("ang12345", archiveID, true)
For archiveID I tied different values:
null
sv-1
sv-2
sv-...hh-mm-ss
Looks like that API not works properly, because I have not had success with staring recording from server side. I reviewed code of LCCS.cs file and found that startRecording method just publish specific item to room XML RoomManager->roomState->recordingState with value "{fullSession:true, archiveID:sv-1, guestsAllowed:True}". LCCS API returns OK on publish this item, but when I call server API method AccountManager.getNodes("ang12345", "/") - I can't find this item in room XML, although by my opinion it should exist here.
Unfortunately LCCS specification does not have any information about XML schema for rooms and about specific features like recording, so I can't check what is wrong here with server API. By my opinion there can be following errors with server API:
recordingState item can't be published to roomState node due to some reasons. Could you check it?
roomState node is wrong place for recordingState item. Can you check it with XML schema defenition?
item value have some problems. As I understand it uses JSON notation, but there may be following problems:
Name of archiveID is not quoted - see underlined.
Bool value for guestsAllowed is started from capital letter - see underlined.
2. Client API
I do not have plans to use client API, but I tried it too to understand what is changed in room XML, and to fix errors myself in code of library for server API.Unfortunately I also was not succeed here, because client API initiate recordings only sometimes and I do not know by which reasons, because I have not changed code at all except renaming archiveID. So I was not be able to check room XML to understand which item should be published to start recording.
For testing client API I used following names for archiveID:
not specified - for that case I have a lot of tries and once it was succeed - one recording was done, and record was uploaded to my server, so I had record ang12345/__defaultArchive, but I deleted it - by this reason now I have only one success record.
test-1 - no success
...etc(different names) - no success
cl-1 - this trying was succesfull (but I have not checked room XML at this moment )
cl-2 - no success
cl-3 - no success
cl-4 - no success
cl-5 - no success
cl-6 - no success
... etc
As you can understand I had a lot of tries with/without setting value for archiveID - but looks like that's not a reason of a problem. Also let me know please what you meant under recordingID -
Your investigation of this problem will be very much appreciated.
Cheers,
Nikita

Pause key during recording Video demo not work

Hello everybody, I dont know why, but Pause key during recording Video demo project not work. I tried all others keys what I see in the Preferences dialog box and all works corectly, only Pause key not. Can somebody help me? Win 7, Captivate 6.
Yarik

Hi there and thank you for reaching Adobe Community.
Unfortunately, this feature is not there in Captivate 6 Video demo.
Thanks!

Samsung Smart TV FiOS App not working

I have a new Samsung Smart TV with the Verizon FiOS app installed, and its not working. When i attempt to start the app, i get the error "unable to fetch data, please exit the application and relanch". Exiting and relanching the app does no good. I have uninstalled and reinstalled the app 3 times, and it is stil not fixed I updated the TV's software, then uninstalled and reinstalled the app, and its still not working. I contacted Samsung customer service, and they could not get the app to work either. if anyone has any suggestions, please let me know. Thanks
Solved!
Go to Solution.

Need to try shutting off TV and starting again.
And you may be low on memory on your Samsung. Samsung doesn't make it easy to manage the memory other than by deleting some unused apps.

Audigy SE not working...NEED HELP BAD!

I have been really frustrated over the past week trying to fix this "no sound" problem. There is no sound coming from speakers and yes, I already checked if it was my speakers and they work perfectly fine. For some reason whenever I play a music file from either iTunes or Windows Media Player it says its playing and no sound is coming out. I checked all drivers in device manager and they are all updated, all enabled, and all working. I already checked if it was on mute and if the volume was on. I need desperate help with this extremely difficult problem because im really, REALLY frustrated with this issue. Thanks and please HELP!! =(

Hi folks,?Initially my audigy 2 nx was not working. But after installing the drivers for vista it started to work. But unfortunately, the other application from creative media source is not working. When I press EAX it says '[color="#000099">the application with the device not found'. But the sound card is working fine.[color="#000099">?[color="#000099">I have even mailed creative with the details. They have sent me a mail with the drivers and an application driver. I have installed the application driver too, but still no luck.[color="#000099">?[color="#000099">Kind regards,[color="#000099">Jwell[color="#000099">?

Smart Recorder Audigy 4 not work

Similar Messages

Maybe you are looking for