SMART SWITCHES BOOT UP TIME

it take 20 - 30 sec for linksys smart switches powe LED to come up.  any reason why is it this way ?

I was Facing the same problem which is fixed by the help of Linksys Support Team.  You just need to update the Boodcode through TFTP server.  Find below the link to download latest bootcode for LGS308 & LGS308P Switches and  Image showing how to do that.
Guide:
http://comlines.com.sa/Linksys/bootcode.png
Bootcode Image:
http://comlines.com.sa/Linksys/linksys_smart_boot-1005.rfb

Similar Messages

  • Smart switch app problem

    I have been trying to use the Samsung app, Smart Switch Mobil to transfer a lot of contacts, photos etc from my Galaxy S3 to my new Galaxy S5.  I have the app on both phones and have followed the directions exactly.  The files begin to transfer, but with a few minutes I get a message that the phones are disconnected because the wireless signal is too weak.  This is ridiculos because I am in my house with a very strong wifi signal always.  Also, I have the phones within inches of each other.  No reason for this stupid message saying the signal is weak.  Anybody know what the real solution might be?

    I tried using Smart Switch and it kept hanging in the middle of the transfer. I tried transferring one item at a time (text messages only, for example). Didn't work. After wasting too much time searching for workarounds, I just connected my new phone to Akruto (an app I was already using to sync Outlook with my devices) and it worked. Didn't even need Smart Switch. Here's info about Akruto: www.akruto.com.
    Hope this helps someone.

  • Why doesn't the SLM2024 Smart Switch 10/100/1000 support 10M?

    Hi,
    Since a couple of weeks I have installed 5 SLM2024 Gig Smart Switches. Now we have a new Time Attendance System that tries to communicate to the Cisco with 10M. The Cisco identifies it correctly but will not parse any info to the Device. Why is that?
    Test it with a D-Link 10/100 Switch -> OK
    Test with a Cisco 10/100 Switch -> OK
    Test with noname 10/100/1000 Switch -> OK
    Test with SLM2024 -> Failed.
    I would love for someone to explain this to me. What does the Cisco do? I would gather that if a Switch is 10/100/1000 it can communicate over anyone.
    Anybody?
    Regards,
    Richard

    Hi Richard,
    I would definitely expect to be receiving broadcast packets, maybe ARP packets  from the time attendance advice.
    Yep that is a problem.
    But, why are you not receiving broadcast packets on the port that is connected to the time attendance device.hmm that my question that I am mulling in the back of my mind.  Your switch port statistics showed an issue.
    Packet capture
    A wireshark or packet trace would be most useful , so mirroring the time attendance switch  port to your PC's switch port would be useful.  This would allow us to see what is coming in and out of that switch port.
    Pretty easy to setup on this managed switch, see my screen capture below as an example.
    Wireshark is a wonderful freeware 'sniffer' software  that would allow us to see the ethernet frames coming in and out of the switch port in question.
    to grab wireshark try the following URL;   http://www.wireshark.org/download.html
    Don't need much data just a 30 second capture and remember to undo the mirroring and save changes  after the capture is taken.
    MAC address Table
    Be interesting to see the dynamic MAC address table to see the MAC address of the time attendance device.
    Might be most intersting to add a static arp entry for the time attendance device, MAP it's MAC address to a switch port.
    (This is only necessary if there isn't a dynamic ARP entry, MAC address of the time attendance device on the switch port.)
    see my screen capture below, you will also note, that underneath the static address is a option to look at the dynamic address.
    Switch port Status and Error log
    But could be most useful to see the setting for that switch port similar to the two following screen captures.
    lastly the log is informative as it might indicate what or where the error is.
    David

  • Sudden increase in boot-up time (OSX Lion, MacBook Pro)

    Hi all,
    I have a 2010 MacBook Pro, with the following specs;
    OSX Lion
    Intel i7 2.8GHz (dual core)
    8GB RAM
    256GB SSD HDD
    Intel HD graphics
    The issue that I have been having is a sudden, unexplained increase in boot-up time. Yesterday and for the past two years, my MBP took circa 15 seconds to boot up, but today it has been taking approximately 5 minutes. I have the latest software update.
    My hard drive space is running low; I only have 4GB of space left, could this be a contributing factor?
    When I switch on the laptop, it get to the picture of the Apple logo, without the spinning gear below, hangs there for approximately 4 minutes, and then eventually continues to the user log-in screen.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Do the same with kernel.log.
    Step 3
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • Boot From Time Capsule

    Is it possible to boot from Time Capsule? I don't see any FireWire Ports.

    I think that if Apple's smart, they'll configure it to work like NetBoot/NetInstall. In other words, as long as you're on the same subnet, just hold down Option (or N) while booting, and you'll see the Time Capsule option.
    Maybe at the very least, you'll have to boot to the Leopard DVD, and you'll have the option to restore from Time Capsule.

  • Slow boot up time on new Macbook Air

    I just got the new Macbook Air a day ago and have already experienced significantly slow boot up time. It takes about 3-5 minutes to get to the log in screen. I know when it was released, it was boasted that it only took seconds to start up after being turned off. Any idea on what I could do to change this or what the issue is?
    Also, I just switched from a PC so have very limited knowledge on the Macbooks.

    Try Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Series 200 Smart Switch not communicating, DHCP blocked

    I have a small, simple small business network.  There are 2 switches - an 8-port switch connected to my main Windows server (which is the DHCP provider for the network), and a 24-port switch which is plugged into the 8-port switch.
    I replaced these switches (Dell unmanaged switches) with the Cisco 200 series smart switches (the 8-port and 26-port models).  When I plug the 26-port switch into the 8-port switch, it is unable to get its DHCP address from the Windows server.  Also, any device plugged into the 26-port switch cannot communicate with any other device, and all of the ethernet port lights flash at the same time at the same frequency - quite a light show!
    If I plug the Windows server DIRECTLY into the 26-port switch it receives a DHCP address.
    I have tried a 2nd Cisco 26-port swtich and it does the same thing, so I assume it is not a hardware issue.
    What is the solution to this problem?

    Louis,
    Try this, go into the first 200 series switch that is connected to the server and go to the spanning tree tab. 
    Under the spanning tree tab properties, set the bridge priority to 0.  This makes this switch the spanning tree root.
    Try this and see if the second switch passes traffic and receives and ip address.

  • How do I use both a GUI switch and a timer to control an output?

    Hi, I have no trouble setting up either a gui switch or a timer to switch a hardware output. However, now I am trying to use both to control the same output. That is, the latest change of either the timer or gui switch changes the output. I can do this by setting the gui switch output and the timer output into a software latch and connecting the latch to the hardware. The problem is that now the gui switch does not reflect the state of the hardware output (if the timer changed the state). One solution I can see is that there is both a push button 'change state' as well as an indicator at the gui but I would rather have all the functionality in the 1 switch. Any suggestions welcome!

    It looks like you should be using a flip-flop object. This object changes state each time your input transitions from false to true. Also you would probably be better off using a push button rather tham a switch.
    You can tie "your timer OR your pushbutton" to the input of your flip-flop. Then if you display the flip-flop on top of the push button you can easily see which state you are in. Then of course just tie your flip-flop to your output.
    **This will work fine as long as you are NOT running multiple client applications. If you are running multiple clients, then it has to be done completely different. If this is the case please let me know and I will explain.
    Hope this helps

  • I have read the various threads regarding slow boot up times, on my 2009 MBP it takes 1 minute to get a usable interface but without doing anything else the HD is active for a further minute, is this reasonable ?

    My MBP after the Lion upgrade takes 1 minute to put something usable on screen and without doing anything else the HD is active for another minute.
    I have visited the Genius bar where they went through some maintenance routines and permissions repaired etc but the boot up time remains the same.
    I have cleared the cache as suggested in other threads but is this the best I can expect as with SL the computer booted up in about 30 seconds ?
    I recall reading there may be unwanted  programs loading at boot up time but I do not know where to look in the system to check.

    Thanks for the reply, I have followed your suggestion but unfortunately it has not improved the boot time, do you have any further advice you could offer me ?
    I use my MBP for working on and storing my photographic images following my Photoshop adjustments, these individual image files are between 50 to 60Mb, I was reading about OSX self defragmenting files below 20Mb, these files are not intended as start up items but do you think storing approx 200Gb of these files could be having so effect ? I am a fromt end user so my limited knowledge is restricted to repairing permissions etc. I am probably clutching at straws but it be better to store these images on an external HD in addition to my backups on other HD's.
    Thanks.

  • 1) How to reduce MacBook boot up time?  2) Should I upgrade my 2008 MacBook to Lion?  3) How long will a 2008 MacBook last (after 4 years)?  Thanks!

    I have three quick questions to ask:
    1.  My MacBook (bought in late 2008,  2.4 GHz Intel Core 2 Duo, 2GB RAM,  160 GB HD, running Leopard/10.5.8) boots up quite slow.  It can take a while to boot up and shut down.
    Question:  What should I do to reduce the boot up time?  
    I haven't done a clean up for a while, and am a MacBook newbie (after 4 years, still) for the tools.  I think I need to remove some applications but don't know exactly how. Also I am looking for stuff like System Defragment / Compression (tools available for Windows OS) to tune the hard disk performance, if possible.
    2.  Sort of related to this slow boot-up time - should I bother to upgrade to Snow Leopard (pay $ 29.00) and then upgrade to Lion (another $ 29 ?) for some 250 new features that I am not exactly sure if I will need it (or my 2008 MacBook can handle it well)?
    My friend has a 2011 MacPro which he let me use it for a while, so I think I am already using Lion,  but frankly I can't tell much difference from the user experience (am just a very average Mac user!).
    Question:  Should I bother the money and the time (I heard the downloading and installation time for Lion is very long) if all I care is boot-up time?
    3.  One last question - How long can my MacBook last?   Is there a way to find out the battery life?  Any indication that my MacBook might be on the edge of its life cycle anytime soon? 
    I heard that typically the life for a laptop (PC or Mac) is 2 years. I am not a heavy user, and I guess that's why my MacBook is still alive after 4 years.  But should I expect that to be failing any time soon?
    Thank you!

    I'll try to make it short but with your questios, might be impossible.
    I own both late 2008 MB Uni with 2Ghz and a brand new late 2011 MBP 13 inch.
    I have lion running on both Macbooks with no slow down or issues.
    The late 2008 I upgraded to 8GB Crucial DDR3 Memory and 320GB Seagate Hard Drive. Total cost to me? $140 CDN ( i live in Canada ).
    My MB Uni's battery has 1047 cycle count and I still get 3-1/2 - 4 hours of battery life depending on what applications I'm using.
    As for typical life of a PC or MAC ( I own both ).  The PC's life is shorter than a MB.  I have a 4 year old Dell Vostro that I had to do a RAM upgrade so Windows 7 would run properly.
    My late 08 MB had 4GB of RAM when I upgraded to Lion with no issues.  i just decided to go 8GB because it was cheap.
    A 2GB MB will boot up and run faster than a 4GB PC with windows 7.
    Nothing is obsolete if you can still do your stuff on your MB.
    To make it boot up faster, see what's loading on startup and take them off if you don't need them.

  • Switching off the Time Capsule: risk of damage?

    Hello everyone. If I switch off my time capsule (1TB, recently bought) when not in use, for example at night (I think to connect it to a power strip), could I damage it? Or maybe only if the TC hard drive is running?
    Thanks

    Welcome to the discussions!
    This topic has been pretty much beat to death on the forums as there has been and will remain different schools of thought on this.
    One school maintains that there is a very good reason that Apple chose not to even put a power switch on the device, and that is that it was designed to run 24/7. Powering off the TC causes it to lose its connection with the local network and internet. When the device is powered back up, these connections must be re-established. Also, when any electronic device is powered up from an off state, the components within the device are subjected to a sudden rush of current. The school thinking on this is that the device will last longer if the unit is left on and subjected to less stress.
    The other school says power it down when not in use to save a bit of electricity. They don't buy the theory that a sudden rush of current has any long term effect on the device and claim that the device may actually last longer because the electronic components are subjected to less heat this way over time.
    Choose your school, or maybe a middle ground that would have the TC powered off for long weekends, vacations or other extended periods when the device is not needed for backups.

  • Link srw2048 and linksys 8 port gigabit smart switch linking together

    Hi all,
    I would like to link my srw2048 in the my celler to the linksys 8port switch i have in the living room so my son can have lan parties. how would i configure this and will i need to make a crossover cable?
    Thanks in advance for any advice

    I don't see the need of configuring your SRW2048 switch for you to be able to connect your  8 port gigabit switch. Since these switches were both smart switch you can use either crossover or straight through cable for them to communicate with each other.

  • I've noticed a delay to boot up time on my 2011MBP SSD after power outage but bookmark tests show same performance

    I shoul add that the MBPS was plugged into surge protector at the time but there is a noticeable seven seconds added to the normal boot up time and the grey wheel does not appear when booting up.

    as to why it happens - could be any number or reasons - got changed by mistake if you booted holding the options key, could be just a simple bug or when you restarted your macbook when it locked up on you or it could've been that power outage you mentioned when your SSD was busy doing something...
    it doesn't happen often and when it does - now you know where to go...
    good luck and hopefully all is good and it wouldn't happen to you again...
    have a good day

  • I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....

    I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....

    Hi there SraZamora,
    The troubouleshooting steps in the article below can be helpful when troubleshooting unresponsive devices.
    iOS: Not responding or does not turn on
    -Griff W.

  • Boot up time of MacBook Pro 13" 2.5GHz i5 vs MacBook Pro 13" with Retina display with 2.4GHz i5

    Hello
    Does anyone know
    "the boot up time of MacBook Pro 13" 2.5GHz i5 vs MacBook Pro 13" with Retina display with 2.4GHz i5?"
    Thanks

    A bit simplifying :
    there are two parts in boot process - one-before spinning thing, other - spinning thing to desktop.
    First part is hardware inits, you can not speed it up. It is for sure longer for your MBP than for her - its normal, more hardware and it is more sophisticated so longer init.
    Second part depends on HD (SSD) speed.
    Say so - I have M4 SSD and second part is 1 to 2 spins until login window. Should be more or less same for you.
    If it is not so - probably something is not good with filesystem and some config files, most probably due to cloning instead of install. Reboot from recovery, repair drive (first - drive as a whole, second - boot partition), then reboot permissions. reboot two times as normal. see what'll happen with timing.

Maybe you are looking for