Smart tag ABAP work

Hi,
I am was trying to see technically how smart tag can be implemented in SAP. Request in case if anybody has worked in this area to share the technical challenges and solution on this.
Appreciate your help in this regard.
Best regards

hi,
Go to this link...hope it will help you
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/30c1d215-871e-2b10-e1bc-944509316612?quicklink=index&overridelayout=true
Shri..

Similar Messages

  • Can't detect Smart Tags on my Xperia P

    Hi, I bought my Xperia P 3 weeks ago along with a couple of Smart Tags but when I turn on NFC and held it next to the tags nothing happened. I have tried turning the phone off and on again and turning the NFC off and on again but still nothing happens. Thinking this was a firmware issue I waited for an update and now I am on 6.0.B.3.184 but with no luck. I did a 'Phone Software Restore' on Sony Bridge for Mac to get the new firmware, as updating the regular way always faild for some reason and tried NFC before installing any apps but still it didn't work.
    Is anyone else having the same issue? can anyone help? my tags are just sitting there on my desk with no use.

    If NFC is enabled and you put your tag over the sensor (under the camera lens) and nothing happens I suggest that you contact your local support team to have your phone examined at an repair center to get it fixed.
    http://www.sonymobile.com/global-en/support/contact-us/contact-info/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Smart tags

    I really like the Smart Tags app for BB 10, but one feature I am expecting to use the most is missing. The app can not write a tag which would start hotspot. As long as it seems taht users can not add reviews in the app world I am writing here. So please consider updating the up with the turn on/off hotspot option.

    Have you tried:
    Edit > Select All
    And then right-click to delete selected tags?  It is worth a try but don't know if it is going to work.

  • Acoustic feedback in Smart Tag (NFC App)

    Hello,
    is there a way to get a acoustic feedback in the Smart Tag (native NFC app)? I have programmed some well working actions (BT off, WiFi off and so on), but I get no feedback if the action was sucessfully. It would be nice, if someone could tell me a idea or a workaround.
    Best regards, Axel

    Hello,
    is there a way to get a acoustic feedback in the Smart Tag (native NFC app)? I have programmed some well working actions (BT off, WiFi off and so on), but I get no feedback if the action was sucessfully. It would be nice, if someone could tell me a idea or a workaround.
    Best regards, Axel

  • CuciLync Smart Tags / Desktop Integration

    Hello,
    We are using the CuciLync client with Microsoft Lync. We are able to make/receive calls, etc successfully, so the installation is working fine however we are unable to dial from 'smart tags' inside Internet Explorer and MS Office applications. It always attempts to make the call via the actual Lync client. Is this controlled by a registry setting or something which can allow the CuciLync client preference over Lync?
    We can not disable Telephony features in Lync iteslf, as it is used for video conferencing unfortunately.
    Please help!

    Sorry mate, but I don't think you're going to like this response.
    If you haven't figured out yet... CUCI-LYNC doesn't integrate with the Microsoft Smartag (or similiar).
    The Click to Call application is embedded in all your apps when you install CUCI-LYNC so you can right click and dial the number on the screen
    However, this does mean that right clicking a name in sharepoint / outlook etc doesn't work and will always invoke the Lync functionality. As you've obviously read, Cisco recommends disabling the smarttags in Office and also setting the User's telephony mode to "5" and disabling video conferencing from Lync.
    [HKEY_CURRENT_USER\Software\Policies\Microsoft\Communicator]
    "TelephonyMode"=dword:00000005
    "DisableAVConferencing"=dword:00000001
    If you're in outlook then the option to call the sender or mail recipients is now in the HOME ribbon. Works well, but is nowhere near as nice as the native Microsoft option...
    Cheers,
    Graham R

  • Smart Sharpen not Working in CC 2014

    Recently I upgraded from CC to CC 2014.  Since then I can't get Smart Sharpen to work.  Lens and motion blur don't work at all.  Sometimes when I choose Gaussian blur it works other times not.
    It's not just me, a friend who has it installed on two computers can't make it work either.
    Any ideas?

    In order to preview .php pages locally, you need a local testing server (Wamp, Xampp, Mamp).  Is yours properly defined in DW CC?  See screenshots.
    Nancy O.

  • Can't Get Smart Albums To Work

    Hi,
    I'm trying to get Smart Albums to work in Aperture 2.0.1 but I'm not having much luck. I've made a simple Smart Album called "All Unadjusted Photos" with these rules:
    Adjustments are not applied
    Now, from what I understand, it should automatically show ALL the photos in my Aperture Library that haven't been adjusted. But it doesn't. It shows nothing.
    Is the location of the Smart Album important, or can you place it anywhere, inside any Folders you want?

    Smart Albums can only see "What's above it". For example this is my layout. Folder (Called Personal) - Folder (Called 2008) - Folder (Called March) - Projects (called Babies, Family, etc). I have Easter images in Family and Babies. I want an Easter Smart Album that would have the Keyword Easter. For it to see both images in Babies and Family I have to put it in either the March folder or 2008. For me I did 2008, thats where my annual events go.
    Hope that makes sense.
    EDIT : I have noticed that sometimes the smart album has issues and I have to recreate, especially if I change the selection criteria a couple of times.
    Message was edited by: ugadawg94

  • Smart Recorder not working anym

    I don't know what happened but Smart Recorder seems to have stopped working. It doesn't pick up on the input source. I have the Peak Meter box checked and there is no activity on there. I've tried different input sources. Wave and What U Hear but none of them work. Help.Message Edited by FuturePilot on 0-2-200703:47 PM

    i can relate to your problem as i have nearly exactly the same . I am trying to record my old lp's to my hd ,i can hear the music not a problem but can't get smart recorder to work . I have tried different imputs including winamp through wave ,no worries about hearing the tracks but again no go with the recorder .Here are a few things that are happening , i to cannot get the peak meter register and when i click the box to remove hiss and clicks i lose the sound . The recorder used to work just fine ,i have updated drivers and programs frome the web site , the onboard sound has been disabled the x-fi card is the coms default . I had problems early on with conflicts between mb and sound card but a bios update fixed that (asus mb amd 64 x2 chip and X-fi platinum sound card.}Really want to find out what is happening as i like the pro for its one step does everything .
    Regards Ned

  • Smart Resizing not working for RDWEB Published desktop

    I have a working RDS deployment, I am able to change the screen resolution of the published desktops both in powershell and registry. However if I add the 'smart sizing' option, this does not get published in the .rdp file. I have added the entries
    in registry but that did not work either. Is this a feature that is disabled by default or I am missing something ?

    Sorry for the wrong information. Smart Resizing  is works with older version of rdp client too (in win 8 you can switch this mode via GUI).
    You must distribute updated version of .rdp file (with smart sizing:i:1 line) to RDS client

  • Smart cover not working properly after upgrade to iOS7

    Since I upgraded my Ipad mini to iOS7 the smart cover stopped working as it was working before. Usually, when I closed the cover the ipad went to sleep and when I opened it the ipad woke up. Is it another problem of iOS7 ? Is there any solution?

    Go to Settings > General > Lock / Unlock and turn this ON (Green).

  • Email body [Tags] that work ?

    Is there a list of the metadata tags that work in email body text anywhere?
    Which tags like [Title] etc will parse to the correct metadata when sending mail directly out?
    Ta
    J

    Only sometimes the content of a field never becomes visible, even when you follow mattbodmans suggestion; see this thread:
    http://discussions.apple.com/thread.jspa?threadID=2292088&tstart=0
    I've been thinking: Is it important how devices are defined: 'Device is master' versus 'Final Cut Server is master'? Could this have effect on the content of the fields?
    Or should there be some mapping?
    Henk Rek

  • Media smart tv stopped working properly

     I get this  error message :media smart tv stopped working properly. Cant find the software, can anyone help.?

    I'm not even sure if I am to use the YouCam or media smart software. This is confusing, it worked the first time I used it then you cam wanted to update system andf now it says I have no webcam....it's built in.
    I have a pavilion dv7

  • Smart Guides not working (grayed out).

    I too am having problems with the 'Smart Guides' option being grayed out in the 'View' - 'Grids and Guides' column. I've replaced the preferences, checked all the appropriate boxes, yet nothing I do works. Additionally, the 'Smart Guides' did work for some time. However, for reason(s) I'm unaware of, they just stopped showing up. I'm stumped. Any suggestions?

    I've branched your question out of the Replace Your Prefs thread into one of its own and changed the title so more people will see it. I'm not able to make the menu item go gray here, and I'm going to presume that you followed the instructions in the other thread for trashing the prefs, so I'm not going to suggest you do that again, at least not yet.
    It would help if we know your OS and version of ID (including the update patch applied).

  • ABAP Work process table is not showing in MMC

    HI ,
    My ABAP ystem is working fine but in MMC ABAP work process table is not showing.
    After rebooting the server in MMC console SID is not appaeraing i have to add the entries eevry time after rebooting.
    Please help me any one.
    Thanks
    Nekkalapu

    Hi,
    I have checked the note :
    Use the SAP tool NTSCMGR. EXE to call up the status of an SAP service and to uninstall or install SAP services. Note with service new installations that, before starting, you must assign a corresponding SAP user for the service with whom the service is started ('Control Panel -> Services -> Startup -> Log on As This Account -> <SID>ADM or SAPService<SID>').
    a) Status query:
                           ntscmgr.exe query <service_name>
    b) Removing a service:
                           ntscmgr.exe remove <service_name>
    is that the right way or any other way .
    Please suggest my system alaready in running state can we do this things while system up or downtime required.
    Is their any impact on exsiting system.

  • How do I delete smart tags

    Hi, this Neanderthal cant delete the smart tags from all his pictures which show pic quality. Answers on a postcard.....many thanks

    Hi,
    Are you able to delete the smart tags now?
    If you dont need the smart tags, change your preferences by clicking on Edit->Preferences->Media-Analysis.
    Also, for removing the tag, right click on the images and select the Remove Keyword tag option.
    Thanks

Maybe you are looking for